Logout crashes system when using fglrx [SOLVED]

Question

Hi guys,
I admit I'm a little annoyed about X related issues with Arch on my thinkpad T400, none of choice is working totally fine on it now. It has ATI HD3470 discrete card and Intel X4500 integrated card, I've tried all available dirvers: xf86-video-ati, xf86-video-radeonhd, catalyst(fglrx) and xf86-video-intel. Here are problem descriptions:
1, Intel X4500 + xf86-video-intel
This scheme is the best working choice at present. Everything is fine, except cannot pass 3D acceleration test in Cedega. glxinfo shows direct rendering is "yes", and openGL direct rendering test in Cedega is passed. With 3D acceleration test failed, I cannot run any games in it. Glxgears shows 420FPS with Intel X4500
2, ATI HD3470 + xf86-video-ati / xf86-video-radeonhd
Annoying! I'm not sure how well the open source driver support my card, surely they are working, but only provide very basically performance. 3D acceleration test in Cedega cannot pass either, while direct rendering is "yes" in glxinfo too! Besides this, the really annoying thing is laptop FAN is keep running with these two drivers, even CPU occupation is ZERO. Glxgears shows 370FPS with radeon or radeonhd.
3, ATI HD3470 + catalyst
This scheme provides best performance, that 3D acceleration test in Cedega can pass, and the game plays smoothly. However, this driver has a frustrated problem: It works fine when first boot up, but if I logout, then X would crash to a black screen, and both keyboard and mouse lost response. Only press power button for 3 seconds to hardly shutdown can leave the mess. More details can refer to: http://bbs.archlinux.org/viewtopic.php?id=62413
Glxgears shows 1200FPS with fglrx.
I guess a comparison is suitable here, with fglrx+ubuntu installed on this laptop, Glxgears shows 3200FPS, and it works totally fine without logging out to black screen problem either. I'm a newbie switched from Ubuntu to Arch, I love the Arch way. But I have to say, I DO NOT like the Arch's X way.
Hope someone who has the same hardware or even the same laptop can help me. Though I don't like to configure X, I like the feeling manually solve problems. Any advice or suggestion or even criticism will be highly appreciated. My xorg.conf are attached in pastebin:
xorg.conf_intel: http://pastebin.com/f49274228
xorg.conf_radeon/radeonhd: http://pastebin.com/f2493d0d9
xorg.conf_catalyst: http://pastebin.com/f3a8545f4
Best regards,
L.Y.
Last edited by leeyee (2009-01-30 09:00:46)

Answer 1

I reinstalled catalyst and now using fglrx driver. I reproduced the problem and paste X server log here, I hope anyone have or had this problem would come on to solve this, seems this problems is old, common and nasty all together.
My system:
Thinkpad T400
ATI Radeon HD3470
xorg-server 1.5.3-4
xorg-server-utils 7.4-2
catalyst 8.12-3
catalyst-utils 8.12-1
kernel26 2.6.28.1-1
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux thinkpad 2.6.28-ARCH #1 SMP PREEMPT Sun Jan 18 20:17:17 UTC 2009 i686
Build Date: 17 December 2008  08:20:05PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 25 13:03:12 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Configured Screen" (0)
(**) |   |-->Monitor "Configured Monitor"
(**) |   |-->Device "ATI HD3470"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "Configured Keyboard"
(**) |-->Input Device "Touchpad"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Configured Mouse
(WW) Disabling Configured Keyboard
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d5fe0
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 4.1
    X.Org XInput driver : 2.1
    X.Org Server Extension : 1.1
    X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@1:0:0) ATI Technologies Inc Mobility Radeon HD 3400 Series rev 0, Mem @ 0xd0000000/0, 0xcfff0000/0, I/O @ 0x00002000/0, BIOS @ 0x????????/131072
(II) System resource ranges:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
    compiled for 7.4.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
(**) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.5.3, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 7.4.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    compiled for 1.4.99.906, module version = 8.56.4
    Module class: X.Org Video Driver
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 0.99.3
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.1
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for fglrx
(II) ATI Proprietary Linux Driver Version Identifier:8.56.4
(II) ATI Proprietary Linux Driver Release Identifier: 8.561                               
(II) ATI Proprietary Linux Driver Build Date: Dec  1 2008 14:55:43
(WW) This ATI Proprietary Linux Driver does not guarantee support of video driver ABI higher than 2.0
(WW) Video driver ABI version of the X server is 4.1
(--) Chipset Supported AMD Graphics Processor (0x95C4) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) fglrx(0): pEnt->device->identifier=0x8775500
(II) resource ranges after probing:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0    0    0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 0.1.0
    ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(II) fglrx(0): Loading PCS database from /etc/ati/amdpcsdb
(II) fglrx(0): 10BitPixelFormat disabled by default
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    compiled for 1.4.99.906, module version = 8.56.4
    ABI class: X.Org Server Extension, version 1.1
(--) fglrx(0): Chipset: "ATI Mobility Radeon HD 3400 Series" (Chipset = 0x95c4)
(--) fglrx(0): (PciSubVendor = 0x17aa, PciSubDevice = 0x210e)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xcfff0000
(--) fglrx(0): I/O port at 0x00002000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.1.0
    ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 10.88
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: M82
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(II) fglrx(0): Using adapter: 1:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
(--) fglrx(0): Video RAM: 262144 kByte, Type: DDR3
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
Backtrace:
0: /usr/bin/X(xorg_backtrace+0x3b) [0x813017b]
1: /usr/bin/X(xf86SigHandler+0x51) [0x80d8cb1]
2: [0xb7f55400]
Fatal server error:
Caught signal 4.  Server aborting
Reproduce problem as follows:
1, Install fglrx as driver for ATI 3470 on LAPTOP
2, Boot up and login gnome will succeed every time.
3, Logout:
3.1 If using GDM
      Logout then it goes into a black screen, both keyboard and mouse lost response, only hard shutdown helps.
3.2 If on runlevel 3
      Logout succeeds, will back into user console. Log into normal users in other consoles succeeds. If now run startx, it will generate above quoted error: "Fatal Server Error: Caught signal 4". After this, commands such as su, ps, sudo, or as root log into other consoles will cause Segment Fault, or even Kernel panic. As these situations happen, only hard shutdown helps.
I've also tried these workarounds found with google or in other forums:
1, Edit /etc/gdm/custom.conf to set X server always restart value equal 1.
    Does not help. Actually, this problem might not caused by gdm, because I boot into runlevel 3 would also have this problem.
2, Edit /boot/grub/menu.lst to add "nopat" option into kernel line
    Does not help, the problem remains.
3, Build catalyst 8.11 with ABS
    Does not help, with catalyst-8.11 X will boot into black screen for the first time too. I'm not sure if I build it correctly, it has a 2.6.27.patch in abs, but I'm using 2.6.28 kernel.
4, Use D-sub instead of DVI
    I'm on LAPTOP, don't have a choice to change to D-sub connector, so I don't know if this help.
5, Remove .Xauthority file or edit /etc/ati/authatieventsd.sh file as https://bugs.launchpad.net/ubuntu/hardy … bug/118605 suggests
    Does not help either, It might not be X authority's problem. But I'm not quite sure.
Alright, I hope these details have made myself clear, because of my poor English. Hope you guys help, thanks in advance!
Last edited by leeyee (2009-01-25 06:33:35)