Vlc 2.0.5 and ffmpeg 1.1.3 segfaults if using AAC (MP4A)

vlc segfaults when using aac (mp4a) audio codec on transcode
./asus0.sh: line 10: 20063 Segmentation fault (core dumped) vlc -Idummy -v 'v4l2:///dev/video0:input=1:standard=2:chroma=I420:width=720:height=576' ':input-slave=alsa://' --v4l2-aspect-ratio=16:9 --sout '#transcode{vcodec=h264{keyint=30},vb=512,fps=25,acodec=mp4a,ab=128,channels=2,fps=25,vt=1024000,deinterlace,canvas-aspect=16:9,aspect=16:9,samplerate=44100,hurry-up,high-priority}:duplicate{dst=std{access=http{mime=video/x-flv},mux=ffmpeg{mux=flv},dst=:8080},dst=std{access=livehttp{seglen=10,delsegs=true,numsegs=5,index="/home/vlc/streaming/asus0.m3u8",index-url="http://leelo.folk.ee/streaming/asus0-########.ts"},mux=ts{use-key-frames},dst="/home/vlc/streaming/asus0-########.ts"},dst=std{access=http{mime=video/x-mpeg},mux=ts,dst=:8090},dst=rtp{sdp=rtsp://:8880/asus0.sdp},dst=std{access=file,mux=ts,dst="/home/vlc/save/FILE"}}' --ttl 12 --sout-ffmpeg-strict=-2 --rtsp-host=193.40.120.236
dmesg last line
[61652.892234] vlc[20074]: segfault at 7f3bcd96d9a0 ip 00007f3c4d3ca100 sp 00007f3c34f01c38 error 4 in libavcodec.so.54.86.100[7f3c4d33a000+7b8000]
no problems when using mpga (mp3) audio. And problem starts after ffmpeg 1.0.1 -> 1.1.3

asus0 is symlink to vlc
asus0 -Idummy \
'v4l2:///dev/video0:input=1:standard=2:chroma=I420:width=720:height=576' ':input-slave=alsa://' \
--v4l2-aspect-ratio=16:9 \
--sout \
'#transcode{vcodec=h264{keyint=30},vb=512,fps=25,acodec=mp4a,ab=128,channels=2,fps=25,vt=1024000,deinterlace,canvas-aspect=16:9,aspect=16:9,samplerate=44100,hurry-up,high-priority}:duplicate{dst=std{access=http{mime=video/x-flv},mux=ffmpeg{mux=flv},dst=:8080},dst=std{access=livehttp{seglen=10,delsegs=true,numsegs=5,index="/home/vlc/streaming/asus0.m3u8",index-url="http://leelo.folk.ee/streaming/asus0-########.ts"},mux=ts{use-key-frames},dst="/home/vlc/streaming/asus0-########.ts"},dst=std{access=http{mime=video/x-mpeg},mux=ts,dst=:8090},dst=rtp{sdp=rtsp://:8880/asus0.sdp},dst=std{access=file,mux=ts,dst="/home/vlc/save/FILE"}}' \
--ttl 12 --sout-ffmpeg-strict=-2 --rtsp-host=193.40.120.236
and big -vvv output from vlc is available http://www2.folk.ee/~jaanus/log.txt
valgrind output http://www2.folk.ee/~jaanus/valgrind.txt
strace -ff output http://www2.folk.ee/~jaanus/strace.txt
vlc, x264 & ffmpeg downgrade helps, but this information may be useful.
This issue is repeatable on different machines. No problem with mp3 audio, crash only occures when using AAC audio codec.
Last edited by bannbann (2013-03-01 10:17:35)

Similar Messages

  • KODI and VLC won't run and keeps Segfaulting

    Hi,
    I'm not sure if this belongs here but as it's to do with multimedia hopefully it does :-)
    My issue is that I am unable to run both Kodi and VLC?? They worked fine before - a few months back, but now after a few updates they don't run any more??
    Running Kodi directly from terminal on XFCE4 I get this:
    $ kodi
    /usr/bin/kodi: line 141: 7267 Segmentation fault (core dumped) python2 ${datarootdir}/${bin_name}/FEH.py $SAVED_ARGS
    while VLC gives me this:
    $ vlc
    VLC media player 2.2.1 Terry Pratchett (Weatherwax) (revision 2.2.1-0-ga425c42)
    Segmentation fault (core dumped)
    My system is totally up to date as of today: 4.0.4-2-ARCH #1 SMP PREEMPT Fri May 22 03:05:23 UTC 2015 x86_64 GNU/Linux
    The H/W specs are 8GB RAM, Core i5 cpu and Nvidia graphics.
    I attempted to use GDB to run Kodi but it just gives me this:
    "/usr/bin/kodi": not in executable format: File format not recognized
    (gdb) run
    Starting program:
    No executable file specified.
    Use the "file" or "exec-file" command.
    VLC seems to give a bit more information:
    Reading symbols from vlc...(no debugging symbols found)...done.
    (gdb) run
    Starting program: /usr/bin/vlc
    [Thread debugging using libthread_db enabled]
    Using host libthread_db library "/usr/lib/libthread_db.so.1".
    VLC media player 2.2.1 Terry Pratchett (Weatherwax) (revision 2.2.1-0-ga425c42)
    Program received signal SIGSEGV, Segmentation fault.
    0x00007ffff79af080 in __lll_unlock_elision () from /usr/lib/libpthread.so.0
    I am wondering if anyone can help me, or should I be filing a bug report?
    Thanks.

    Ok many thanks done;
    https://wiki.archlinux.org/index.php/Microcode
    Update is complete and now KODI managed to run but still segfaulted??
    ############## Kodi CRASH LOG ###############
    ################ SYSTEM INFO ################
    Date: Tue May 26 18:26:31 BST 2015
    Kodi Options:
    Arch: x86_64
    Kernel: Linux 4.0.4-2-ARCH #1 SMP PREEMPT Fri May 22 03:05:23 UTC 2015
    Release: Arch Linux
    ############## END SYSTEM INFO ##############
    ############### STACK TRACE #################
    ############# END STACK TRACE ###############
    ################# LOG FILE ##################
    18:25:36 T:140529503250432 NOTICE: special://profile/ is mapped to: special://masterprofile/
    18:25:36 T:140529503250432 NOTICE: -----------------------------------------------------------------------
    18:25:36 T:140529503250432 NOTICE: Starting Kodi (14.2 Git:Unknown). Platform: Linux x86 64-bit
    18:25:36 T:140529503250432 NOTICE: Using Release Kodi x64 build
    18:25:36 T:140529503250432 NOTICE: Kodi compiled Apr 13 2015 by GCC 4.9.2 for Linux x86 64-bit version 3.18.5 (201221)
    18:25:36 T:140529503250432 NOTICE: Running on Arch Linux rolling, kernel: Linux x86 64-bit version 4.0.4-2-ARCH
    18:25:36 T:140529503250432 NOTICE: FFmpeg statically linked, version: 2.4.6-xbmc-2.4.6-Helix
    18:25:36 T:140529503250432 NOTICE: Host CPU: Intel(R) Core(TM) i5-4690 CPU @ 3.50GHz, 4 cores available
    18:25:36 T:140529503250432 NOTICE: special://xbmc/ is mapped to: /usr/share/kodi
    18:25:36 T:140529503250432 NOTICE: special://xbmcbin/ is mapped to: /usr/lib/kodi
    18:25:36 T:140529503250432 NOTICE: special://masterprofile/ is mapped to: /home/htpc/.kodi/userdata
    18:25:36 T:140529503250432 NOTICE: special://home/ is mapped to: /home/htpc/.kodi
    18:25:36 T:140529503250432 NOTICE: special://temp/ is mapped to: /home/htpc/.kodi/temp
    18:25:36 T:140529503250432 NOTICE: The executable running is: /usr/lib/kodi/kodi.bin
    18:25:36 T:140529503250432 NOTICE: Local hostname: HTPC1.optiplex-networks.com
    18:25:36 T:140529503250432 NOTICE: Log File is located: /home/htpc/.kodi/temp/kodi.log
    18:25:36 T:140529503250432 NOTICE: -----------------------------------------------------------------------
    18:25:36 T:140529503250432 NOTICE: load settings...
    18:25:36 T:140529503250432 NOTICE: Found 1 Lists of Devices
    18:25:36 T:140529503250432 NOTICE: Enumerated PULSE devices:
    18:25:36 T:140529503250432 NOTICE: Device 1
    18:25:36 T:140529503250432 NOTICE: m_deviceName : Default
    18:25:36 T:140529503250432 NOTICE: m_displayName : Default
    18:25:36 T:140529503250432 NOTICE: m_displayNameExtra: Default Output Device (PULSEAUDIO)
    18:25:36 T:140529503250432 NOTICE: m_deviceType : AE_DEVTYPE_PCM
    18:25:36 T:140529503250432 NOTICE: m_channels : FL,FR
    18:25:36 T:140529503250432 NOTICE: m_sampleRates : 5512,8000,11025,16000,22050,32000,44100,48000,64000,88200,96000,176400,192000,384000
    18:25:36 T:140529503250432 NOTICE: m_dataFormats : AE_FMT_U8,AE_FMT_S16NE,AE_FMT_S24NE3,AE_FMT_S24NE4,AE_FMT_S32NE,AE_FMT_FLOAT
    18:25:36 T:140529503250432 NOTICE: Device 2
    18:25:36 T:140529503250432 NOTICE: m_deviceName : alsa_output.pci-0000_01_00.1.hdmi-stereo-extra2
    18:25:36 T:140529503250432 NOTICE: m_displayName : HDA NVidia Digital Stereo (HDMI 3)
    18:25:36 T:140529503250432 NOTICE: m_displayNameExtra: HDMI / DisplayPort 3 (PULSEAUDIO)
    18:25:36 T:140529503250432 NOTICE: m_deviceType : AE_DEVTYPE_PCM
    18:25:36 T:140529503250432 NOTICE: m_channels : FL,FR
    18:25:36 T:140529503250432 NOTICE: m_sampleRates : 5512,8000,11025,16000,22050,32000,44100,48000,64000,88200,96000,176400,192000,384000
    18:25:36 T:140529503250432 NOTICE: m_dataFormats : AE_FMT_U8,AE_FMT_S16NE,AE_FMT_S24NE3,AE_FMT_S24NE4,AE_FMT_S32NE,AE_FMT_FLOAT
    18:25:36 T:140529503250432 NOTICE: Device 3
    18:25:36 T:140529503250432 NOTICE: m_deviceName : alsa_output.pci-0000_00_1b.0.analog-stereo
    18:25:36 T:140529503250432 NOTICE: m_displayName : Built-in Audio Analog Stereo
    18:25:36 T:140529503250432 NOTICE: m_displayNameExtra: Line Out (PULSEAUDIO)
    18:25:36 T:140529503250432 NOTICE: m_deviceType : AE_DEVTYPE_PCM
    18:25:36 T:140529503250432 NOTICE: m_channels : FL,FR
    18:25:36 T:140529503250432 NOTICE: m_sampleRates : 5512,8000,11025,16000,22050,32000,44100,48000,64000,88200,96000,176400,192000,384000
    18:25:36 T:140529503250432 NOTICE: m_dataFormats : AE_FMT_U8,AE_FMT_S16NE,AE_FMT_S24NE3,AE_FMT_S24NE4,AE_FMT_S32NE,AE_FMT_FLOAT
    18:25:36 T:140529503250432 NOTICE: Device 4
    18:25:36 T:140529503250432 NOTICE: m_deviceName : alsa_output.hw_1_7
    18:25:36 T:140529503250432 NOTICE: m_displayName : HDA NVidia
    18:25:36 T:140529503250432 NOTICE: m_displayNameExtra: HDA NVidia (PULSEAUDIO)
    18:25:36 T:140529503250432 NOTICE: m_deviceType : AE_DEVTYPE_PCM
    18:25:36 T:140529503250432 NOTICE: m_channels : FL,FR
    18:25:36 T:140529503250432 NOTICE: m_sampleRates : 5512,8000,11025,16000,22050,32000,44100,48000,64000,88200,96000,176400,192000,384000
    18:25:36 T:140529503250432 NOTICE: m_dataFormats : AE_FMT_U8,AE_FMT_S16NE,AE_FMT_S24NE3,AE_FMT_S24NE4,AE_FMT_S32NE,AE_FMT_FLOAT
    18:25:36 T:140529503250432 ERROR: CSettingsManager: unable to load settings from special://masterprofile/guisettings.xml, creating new default settings
    18:25:36 T:140529503250432 NOTICE: No settings file to load (special://xbmc/system/advancedsettings.xml)
    18:25:36 T:140529503250432 NOTICE: No settings file to load (special://masterprofile/advancedsettings.xml)
    18:25:36 T:140529503250432 NOTICE: Default DVD Player: dvdplayer
    18:25:36 T:140529503250432 NOTICE: Default Video Player: dvdplayer
    18:25:36 T:140529503250432 NOTICE: Default Audio Player: paplayer
    18:25:36 T:140529503250432 NOTICE: Disabled debug logging due to GUI setting. Level 0.
    18:25:36 T:140529503250432 NOTICE: Log level changed to "LOG_LEVEL_NORMAL"
    18:25:36 T:140529503250432 NOTICE: Loading player core factory settings from special://xbmc/system/playercorefactory.xml.
    18:25:36 T:140529503250432 NOTICE: Loaded playercorefactory configuration
    18:25:36 T:140529503250432 NOTICE: Loading player core factory settings from special://masterprofile/playercorefactory.xml.
    18:25:36 T:140529503250432 NOTICE: special://masterprofile/playercorefactory.xml does not exist. Skipping.
    17:25:36 T:140529017550592 NOTICE: Thread ActiveAE start, auto delete: false
    17:25:36 T:140529083053824 NOTICE: Thread AESink start, auto delete: false
    17:25:36 T:140529083053824 NOTICE: PulseAudio: Opened device Default in pcm mode with Buffersize 150 ms
    17:25:36 T:140529503250432 NOTICE: ADDONS: Using repository repository.xbmc.org
    17:25:36 T:140529057007360 NOTICE: Thread PeripBusCEC start, auto delete: false
    17:25:36 T:140529503250432 NOTICE: Register - new imon device registered on usb->/sys/devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.3: iMON HID device (15C2:0036)
    17:25:36 T:140529048614656 NOTICE: Thread PeripBusUSBUdev start, auto delete: false
    17:25:36 T:140529503250432 NOTICE: Setup SDL
    17:25:36 T:140529503250432 NOTICE: Checking resolution 16
    17:25:36 T:140529503250432 NOTICE: Using visual 0x28
    17:25:36 T:140529503250432 NOTICE: GL_VENDOR = NVIDIA Corporation
    17:25:36 T:140529503250432 NOTICE: GL_RENDERER = GeForce GTX 750 Ti/PCIe/SSE2
    17:25:36 T:140529503250432 NOTICE: GL_VERSION = 4.5.0 NVIDIA 352.09
    17:25:36 T:140529503250432 NOTICE: GL_SHADING_LANGUAGE_VERSION = 4.50 NVIDIA
    17:25:36 T:140529503250432 NOTICE: GL_GPU_MEMORY_INFO_TOTAL_AVAILABLE_MEMORY_NVX = 2097152
    17:25:36 T:140529503250432 NOTICE: GL_GPU_MEMORY_INFO_DEDICATED_VIDMEM_NVX = 2097152
    17:25:36 T:140529503250432 NOTICE: GL_EXTENSIONS = GL_AMD_multi_draw_indirect GL_AMD_seamless_cubemap_per_texture GL_ARB_arrays_of_arrays GL_ARB_base_instance GL_ARB_bindless_texture GL_ARB_blend_func_extended GL_ARB_buffer_storage GL_ARB_clear_buffer_object GL_ARB_clear_texture GL_ARB_clip_control GL_ARB_color_buffer_float GL_ARB_compatibility GL_ARB_compressed_texture_pixel_storage GL_ARB_conservative_depth GL_ARB_compute_shader GL_ARB_compute_variable_group_size GL_ARB_conditional_render_inverted GL_ARB_copy_buffer GL_ARB_copy_image GL_ARB_cull_distance GL_ARB_debug_output GL_ARB_depth_buffer_float GL_ARB_depth_clamp GL_ARB_depth_texture GL_ARB_derivative_control GL_ARB_direct_state_access GL_ARB_draw_buffers GL_ARB_draw_buffers_blend GL_ARB_draw_indirect GL_ARB_draw_elements_base_vertex GL_ARB_draw_instanced GL_ARB_enhanced_layouts GL_ARB_ES2_compatibility GL_ARB_ES3_compatibility GL_ARB_ES3_1_compatibility GL_ARB_explicit_attrib_location GL_ARB_explicit_uniform_location GL_ARB_fragment_coord_conventions GL_ARB_fragment_layer_viewport GL_ARB_fragment_program GL_ARB_fragment_program_shadow GL_ARB_fragment_shader GL_ARB_framebuffer_no_attachments GL_ARB_framebuffer_object GL_ARB_framebuffer_sRGB GL_ARB_geometry_shader4 GL_ARB_get_program_binary GL_ARB_get_texture_sub_image GL_ARB_gpu_shader5 GL_ARB_gpu_shader_fp64 GL_ARB_half_float_pixel GL_ARB_half_float_vertex GL_ARB_imaging GL_ARB_indirect_parameters GL_ARB_instanced_arrays GL_ARB_internalformat_query GL_ARB_internalformat_query2 GL_NV_internalformat_sample_query GL_ARB_invalidate_subdata GL_ARB_map_buffer_alignment GL_ARB_map_buffer_range GL_ARB_multi_bind GL_ARB_multi_draw_indirect GL_ARB_multisample GL_ARB_multitexture GL_ARB_occlusion_query GL_ARB_occlusion_query2 GL_ARB_pipeline_statistics_query GL_ARB_pixel_buffer_object GL_ARB_point_parameters GL_ARB_point_sprite GL_ARB_program_interface_query GL_ARB_provoking_vertex GL_ARB_robust_buffer_access_behavior GL_ARB_robustness GL_ARB_sample_shading GL_ARB_sampler_objects GL_ARB_seamless_cube_map GL_ARB_seamless_cubemap_per_texture GL_ARB_separate_shader_objects GL_ARB_shader_atomic_counters GL_ARB_shader_bit_encoding GL_ARB_shader_draw_parameters GL_ARB_shader_group_vote GL_ARB_shader_image_load_store GL_ARB_shader_image_size GL_ARB_shader_objects GL_ARB_shader_precision GL_ARB_query_buffer_object GL_ARB_shader_storage_buffer_object GL_ARB_shader_subroutine GL_ARB_shader_texture_image_samples GL_ARB_shader_texture_lod GL_ARB_shading_language_100 GL_ARB_shading_language_420pack GL_ARB_shading_language_include GL_ARB_shading_language_packing GL_ARB_shadow GL_ARB_sparse_buffer GL_ARB_sparse_texture GL_ARB_stencil_texturing GL_ARB_sync GL_ARB_tessellation_shader GL_ARB_texture_barrier GL_ARB_texture_border_clamp GL_ARB_texture_buffer_object GL_ARB_texture_buffer_object_rgb32 GL_ARB_texture_buffer_range GL_ARB_texture_compression GL_ARB_texture_compression_bptc GL_ARB_texture_compression_rgtc GL_ARB_texture_cube_map GL_ARB_texture_cube_map_array GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_float GL_ARB_texture_gather GL_ARB_texture_mirror_clamp_to_edge GL_ARB_texture_mirrored_repeat GL_ARB_texture_multisample GL_ARB_texture_non_power_of_two GL_ARB_texture_query_levels GL_ARB_texture_query_lod GL_ARB_texture_rectangle GL_ARB_texture_rg GL_ARB_texture_rgb10_a2ui GL_ARB_texture_stencil8 GL_ARB_texture_storage GL_ARB_texture_storage_multisample GL_ARB_texture_swizzle GL_ARB_texture_view GL_ARB_timer_query GL_ARB_transform_feedback2 GL_ARB_transform_feedback3 GL_ARB_transform_feedback_instanced GL_ARB_transform_feedback_overflow_query GL_ARB_transpose_matrix GL_ARB_uniform_buffer_object GL_ARB_vertex_array_bgra GL_ARB_vertex_array_object GL_ARB_vertex_attrib_64bit GL_ARB_vertex_attrib_binding GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_vertex_shader GL_ARB_vertex_type_10f_11f_11f_rev GL_ARB_vertex_type_2_10_10_10_rev GL_ARB_viewport_array GL_ARB_window_pos GL_ATI_draw_buffers GL_ATI_texture_float GL_ATI_texture_mirror_once GL_S3_s3tc GL_EXT_texture_env_add GL_EXT_abgr GL_EXT_bgra GL_EXT_bindable_uniform GL_EXT_blend_color GL_EXT_blend_equation_separate GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_compiled_vertex_array GL_EXT_Cg_shader GL_EXT_depth_bounds_test GL_EXT_direct_state_access GL_EXT_draw_buffers2 GL_EXT_draw_instanced GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample GL_EXTX_framebuffer_mixed_formats GL_EXT_framebuffer_multisample_blit_scaled GL_EXT_framebuffer_object GL_EXT_framebuffer_sRGB GL_EXT_geometry_shader4 GL_EXT_gpu_program_parameters GL_EXT_gpu_shader4 GL_EXT_multi_draw_arrays GL_EXT_packed_depth_stencil GL_EXT_packed_float GL_EXT_packed_pixels GL_EXT_pixel_buffer_object GL_EXT_point_parameters GL_EXT_polygon_offset_clamp GL_EXT_provoking_vertex GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_shader_objects GL_EXT_separate_specular_color GL_EXT_shader_image_load_formatted GL_EXT_shader_image_load_store GL_EXT_shader_integer_mix GL_EXT_shadow_funcs GL_EXT_stencil_two_side GL_EXT_stencil_wrap GL_EXT_texture3D GL_EXT_texture_array GL_EXT_texture_buffer_object GL_EXT_texture_compression_dxt1 GL_EXT_texture_compression_latc GL_EXT_texture_compression_rgtc GL_EXT_texture_compression_s3tc GL_EXT_texture_cube_map GL_EXT_texture_edge_clamp GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_integer GL_EXT_texture_lod GL_EXT_texture_lod_bias GL_EXT_texture_mirror_clamp GL_EXT_texture_object GL_EXT_texture_shared_exponent GL_EXT_texture_sRGB GL_EXT_texture_sRGB_decode GL_EXT_texture_storage GL_EXT_texture_swizzle GL_EXT_timer_query GL_EXT_transform_feedback2 GL_EXT_vertex_array GL_EXT_vertex_array_bgra GL_EXT_vertex_attrib_64bit GL_EXT_x11_sync_object GL_EXT_import_sync_object GL_IBM_rasterpos_clip GL_IBM_texture_mirrored_repeat GL_KHR_context_flush_control GL_KHR_debug GL_KHR_robust_buffer_access_behavior GL_KHR_robustness GL_KTX_buffer_region GL_NV_bindless_multi_draw_indirect GL_NV_bindless_multi_draw_indirect_count GL_NV_bindless_texture GL_NV_blend_equation_advanced GL_NV_blend_equation_advanced_coherent GL_NV_blend_square GL_NV_command_list GL_NV_compute_program5 GL_NV_conditional_render GL_NV_copy_depth_to_color GL_NV_copy_image GL_NV_depth_buffer_float GL_NV_depth_clamp GL_NV_draw_texture GL_NV_ES1_1_compatibility GL_NV_ES3_1_compatibility GL_NV_explicit_multisample GL_NV_fence GL_NV_float_buffer GL_NV_fog_distance GL_NV_fragment_program GL_NV_fragment_program_option GL_NV_fragment_program2 GL_NV_framebuffer_multisample_coverage GL_NV_geometry_shader4 GL_NV_gpu_program4 GL_NV_gpu_program4_1 GL_NV_gpu_program5 GL_NV_gpu_program5_mem_extended GL_NV_gpu_program_fp64 GL_NV_gpu_shader5 GL_NV_half_float GL_NV_light_max_exponent GL_NV_multisample_coverage GL_NV_multisample_filter_hint GL_NV_occlusion_query GL_NV_packed_depth_stencil GL_NV_parameter_buffer_object GL_NV_parameter_buffer_object2 GL_NV_path_rendering GL_NV_pixel_data_range GL_NV_point_sprite GL_NV_primitive_restart GL_NV_register_combiners GL_NV_register_combiners2 GL_NV_shader_atomic_counters GL_NV_shader_atomic_float GL_NV_shader_atomic_int64 GL_NV_shader_buffer_load GL_NV_shader_storage_buffer_object GL_NV_texgen_reflection GL_NV_texture_barrier GL_NV_texture_compression_vtc GL_NV_texture_env_combine4 GL_NV_texture_multisample GL_NV_texture_rectangle GL_NV_texture_shader GL_NV_texture_shader2 GL_NV_texture_shader3 GL_NV_transform_feedback GL_NV_transform_feedback2 GL_NV_uniform_buffer_unified_memory GL_NV_vdpau_interop GL_NV_vertex_array_range GL_NV_vertex_array_range2 GL_NV_vertex_attrib_integer_64bit GL_NV_vertex_buffer_unified_memory GL_NV_vertex_program GL_NV_vertex_program1_1 GL_NV_vertex_program2 GL_NV_vertex_program2_option GL_NV_vertex_program3 GL_NVX_conditional_render GL_NVX_gpu_memory_info GL_NVX_nvenc_interop GL_NV_shader_thread_group GL_NV_shader_thread_shuffle GL_KHR_blend_equation_advanced GL_KHR_blend_equation_advanced_coherent GL_SGIS_generate_mipmap GL_SGIS_texture_lod GL_SGIX_depth_texture GL_SGIX_shadow GL_SUN_slice_accum
    17:25:36 T:140529503250432 NOTICE: Running database version Addons16
    17:25:36 T:140529503250432 NOTICE: start dvd mediatype detection
    17:25:36 T:140529027544832 NOTICE: Thread DetectDVDMedia start, auto delete: false
    17:25:37 T:140529503250432 WARNING: JSONRPC: Could not parse type "PVR.Details.Channel"
    17:25:37 T:140529503250432 WARNING: JSONRPC: Could not parse type "PVR.Details.ChannelGroup.Extended"
    17:25:37 T:140529503250432 WARNING: JSONRPC: Could not parse type "GUI.Property.Value"
    17:25:37 T:140529503250432 WARNING: JSONRPC: Could not parse type "Setting.Details.SettingList"
    17:25:37 T:140528995170048 NOTICE: Thread LanguageInvoker start, auto delete: false
    17:25:37 T:140529503250432 NOTICE: initialize done
    17:25:37 T:140529503250432 NOTICE: Running the application...
    17:25:37 T:140528995170048 NOTICE: -->Python Interpreter Initialized<--
    17:25:37 T:140528689755904 NOTICE: Thread JobWorker start, auto delete: true
    17:25:37 T:140529503250432 NOTICE: starting zeroconf publishing
    17:25:37 T:140529503250432 NOTICE: ES: Starting event server
    17:25:37 T:140528672970496 NOTICE: Thread JobWorker start, auto delete: true
    17:25:37 T:140528664577792 NOTICE: Thread EventServer start, auto delete: false
    17:25:37 T:140528664577792 NOTICE: ES: Starting UDP Event server on 0.0.0.0:9777
    17:25:37 T:140528664577792 NOTICE: UDP: Listening on port 9777
    17:25:37 T:140528656185088 NOTICE: Thread TCPServer start, auto delete: false
    17:25:37 T:140528175806208 NOTICE: Thread JobWorker start, auto delete: true
    17:25:37 T:140529027544832 NOTICE: Thread RSSReader start, auto delete: false
    17:25:47 T:140528175806208 ERROR: CCurlFile::FillBuffer - Failed: Timeout was reached(28)
    17:25:47 T:140528175806208 ERROR: CCurlFile::CReadState::Connect, didn't get any data from stream.
    17:25:47 T:140528175806208 ERROR: Open - failed to open source <http://mirrors.kodi.tv/addons/gotham/addons.xml.md5>
    17:25:47 T:140528175806208 ERROR: Failed to fetch checksum for directory listing http://mirrors.kodi.tv/addons/gotham/addons.xml for repository repository.xbmc.org.
    17:25:53 T:140528995170048 NOTICE: Thread BackgroundLoader start, auto delete: false
    17:26:16 T:140528672970496 NOTICE: Previous line repeats 2 times.
    17:26:16 T:140528672970496 NOTICE: PVRManager - starting up
    17:26:16 T:140528995170048 NOTICE: Thread PVRManager start, auto delete: false
    17:26:16 T:140528167413504 NOTICE: Thread PVRClient start, auto delete: false
    17:26:23 T:140528156923648 NOTICE: Thread BackgroundLoader start, auto delete: false
    17:26:28 T:140528175806208 NOTICE: PVRManager - stopping
    17:26:28 T:140528175806208 NOTICE: PVRManager - starting up
    17:26:28 T:140528167413504 NOTICE: Thread PVRManager start, auto delete: false
    17:26:28 T:140528995170048 NOTICE: Thread PVRClient start, auto delete: false
    17:26:28 T:140528156923648 NOTICE: Thread BackgroundLoader start, auto delete: false
    17:26:28 T:140528995170048 NOTICE: AddOnLog: Tvheadend HTSP Client: CHTSPConnection - SendGreeting - connection opened to 'HTS Tvheadend 4.1.12~g0e5ec2a', protocol v20
    17:26:30 T:140528122193664 NOTICE: Thread PVRGUIInfo start, auto delete: false
    17:26:30 T:140527840261888 NOTICE: Thread EPGUpdater start, auto delete: false
    17:26:30 T:140528167413504 NOTICE: Start - EPG thread started
    ############### END LOG FILE ################
    ############ END Kodi CRASH LOG #############

  • [solved]Update of x264 and ffmpeg breaks MPD

    Updating to x264-20100107-1  and ffmpeg-20100108-2 had a bad effect on MPD today
    error while loading shared libraries: libx264.so.67 
    error while loading shared libraries libavutil.so.49
    Were the error I got after update when trying to start mpd. 
    Rather than do the ugly ls -s fix I'll wait for a rebuild/fix.
    Anyone else??
    Last edited by jwbirdsong (2010-01-10 23:26:56)

    I've not pulled in my msg from arch-dev-public in last 24 hrs or so... my bad. 
    I at least did ask in #archlinux and got no response before posting here. 
    wonder wrote:P.S mpd rebuilt has landed testing.
    good... I somehow knew if I posted this to begin w/  MPD would be rebuilt/uploaded soon  soon after I posted.
    Last edited by jwbirdsong (2010-01-10 23:28:33)

  • I have the application vlc on my mac and it isnt quitting or responding to anything i do so i cant upgrade my software, i have the application vlc on my mac and it isnt quitting or responding to anything i do so i cant upgrade my software

    i have the application vlc on my mac and it isnt quitting or responding to anything i do so i cant upgrade my software, i have the application vlc on my mac and it isnt quitting or responding to anything i do so i cant upgrade my software

    There is an option called Force Quit, which you can find under the apple ion in menu bar. open and select and force quit the VLC. what ever the application it should respond to force quit!

  • Reading InputStream from Runtime.exec() and ffmpeg?

    I've got a lot of things going on here and I'm having trouble debugging. I'm working on a streaming music player, and the platform only handles MP3 natively. Specifically, the method that handles incoming requests has to return an InputStream for further processing upstream (out of my visibility).
    I'm trying to extend the music player to play AAC files with the extension ".m4a". To do this, my plan is to transcode from MP3 to AAC using Runtime.exec() and ffmpeg, and then return an InputStream that contains the MP3. This works fine if I use ffmpeg to transcode to a temp file, and then return a FileInputStream constructed from that temp file. But like I said, this is supposed to be a steaming music player, and the blocking for the ~30 seconds it takes to completely transcode to a file is too much of a delay.
    So what I'm trying to do is have ffmpeg transcode to stdout, and then use Process.getInputStream() to return the InputStream that contains ffmpeg's stdout while the transcoding is still going on. This doesn't work and I'm not sure why. (I'm fairly new to java, and this is the first time I've used Runtime.) My player just hangs there. I know Runtime is picky about exhausting the stdout and stderr streams, so I'm not sure if it's something related to that, or if I somehow need to buffer the stdout before returning it, or if I need to run something in a different thread, or if I'm just completely barking up the wrong tree.
    If anyone has any experience with something like this, or can point me at some code that implements something similar, I'd appreciate the help.
    Below a sample of the code in question. Also, for what it's worth, all of the console messages that I put in there are printing, but the music doesn't play.
       public InputStream getStream(String uri) throws IOException
                 System.out.println("Entering Factory.getStream()");
                  System.out.flush();
                File file = new File(URLDecoder.decode(uri, "UTF-8"));
                if (file.exists())
                     if(file.getPath().toLowerCase().endsWith(".mp3")) {
                            // This code for playing MP3 files works correctly
                          System.out.println("Playing MP3");
                          System.out.flush();
                          InputStream in = new FileInputStream(file);
                          return in;
                     else if(file.getPath().toLowerCase().endsWith(".m4a")){
                          System.out.println("Playing M4A");
                          System.out.flush();
                          // Create array for ffmpeg command line
                            // This command line transcodes to STDOUT
                          String[] command = { this.ffmpeg_path,
                                                             "-i", 
                                                             "input.m4a",
                                                             "-acodec",
                                                             "libmp3lame",
                                                             "-ac",
                                                             "2",
                                                             "-ab",
                                                             "256",
                                                             "-f",
                                                             "mp3",
                          // Begin transcoding with ffmpeg
                          System.out.println("Transcoding...");
                          System.out.flush();
                          Runtime runtime = Runtime.getRuntime();
                          Process ffmpeg = runtime.exec(command);
                          // Must exhaust error stream, or the application can become deadlocked.
                          System.out.println("Exhausting stderr...");
                          System.out.flush();
                          this.exhaustInputStream(ffmpeg.getErrorStream());
                          // Return ffmpeg's stdout as an input stream
                          System.out.println("Returning stdout...");
                          System.out.flush();
                          return ffmpeg.getInputStream();
                     else {
                          System.out.println("Unsupported Audio File");
                          System.out.flush();
                          return null;
                else
                    // We aren't requesting a file, so let the API handle the request upstream...
                    return super.getStream(uri);
         private void exhaustInputStream(final InputStream inputStream) {
                  // Since InputStream.read() blocks, exhast the stream in a separate thread
                  new Thread() {
                       public void run() {
                            try {
                                 while(inputStream.read() >= 0) {
                                      // Just throw the bytes away
                            catch(IOException e) {
                                 e.printStackTrace();
                  }.start();
             }

    Read this article
    http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html

  • I have 2 macbooks each with an account for me and one for my wife. I use one Macbook logged in with my account and my wife uses the other Macbook only loged in on her account. We both make regular time-machine back-ups each on a separate external disk

    I have 2 Macbooks each with an account for me and one for my wife. I use one Macbook logged in with my account and my wife uses the other Macbook only logged in on her account. We both make regular time-machine back-ups each on a separate external disk. Is it possible to update her account on my macbook using her external disk without overwriting my stuff on the same Macbook and vice versa?

    Time Machine does not do individual accounts. It records the complete drive. So if you were to use her TM backup on your Mac it would make your Mac just like hers. Both yours and her account on your MAC.
    Just copy the missing files over from her Mac to yours. If there are differennt programs on each then they would need to be installed on both.

  • TS4268 I have apple ID and when trying to sign in to use FaceTime,i always get registration error.how may you help me for that guys,thanks.

    I have apple ID and when trying to sign in to use FaceTime,I always get error in registration,(This words always apper; The server encountered an error processing registration.Please try again later.)
    Can I get your Advise on what to do? Thanks

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • HT201269 I am trying to save memory on my iPhone 4S/ ios6. Can I back up all photos to icloud and the external hard disk I normally use for photos? If I then delete photos from the iPhone do the get deleted on iCloud?

    I am trying to save memory on my iPhone 4S/ ios6.
    1) Can I back up all photos to icloud and the external hard disk I normally use for photos? If I then delete photos from the iPhone do the get deleted on iCloud?
    2) Can I back up the newsstand to iCloud and save memory on the iPhone?
    3) Can I back up the bookshelf to icloud and save memory on the iPhone?

    1. What format is the external drive? It sounds like it's ina format that Macs can't write to. Is it a NAS or NTFS?
    2. Easiest thing: just move your iPhoto Library to the external
    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

  • 1)Now I use Lightrom 5.7 how to upgrade to 6 or CC? 2) What is the difference between 6 and CC vercion? 3) When I used lightromm 3, I could see inEXIF the distance in meters till the object I took, in the later virsions that function disappeared, it is ve

    1)Now I use Lightrom 5.7 how to upgrade to 6 or CC?
    2) What is the difference between 6 and CC version?
    3) When I used lightromm 3, I could see in EXIF the distance in meters till the object I took, in the later virsions that function disappeared, it is very sad  I am stiil waiting and hope that it would be possibble in the new  versions. Or this indication may  possible by setting?

    1)Now I use Lightrom 5.7 how to upgrade to 6 or CC?
    Purchase the standalone upgrade from here: Products
    Download CC version from here: Explore Adobe desktop apps | Adobe Creative Cloud
    2) What is the difference between 6 and CC version?
    See this comparison chart: Compare Lightroom versions | Adobe Photoshop Lightroom CC
    3) When I used lightromm 3, I could see in EXIF the distance in meters till the object I took, in the later virsions that function disappeared, it is very sad  I am stiil waiting and hope that it would be possibble in the new  versions. Or this indication may  possible by setting?
    Rob Cole's ExifMeta plugin displays the Subject Distance field (and much more).  Unfortunately, his Web site appears to be down again.  He used to be very active here, but he hasn't posted in several months.

  • How do I use my apple bluetooth keyboard with touch and will I still be able to use it with my ipad?

    How do I use my apple bluetooth keyboard with touch and will I still be able to use it with my ipad?

    iPod touch User Guide (For iOS 4.3 Software)

  • Can you save your own theme and button set up so I can use the same format

    Can you save your own theme and button set up, so I can use this same format for similar content. I want to keep the button content and the theme the same without having to create it everytime? I am trying to streamline the process for multiple dvd's with the same menu and buttons but different content. Does that make sense?

    I am only new to this caper too, but I am pretty sure you can save a theme as a favourite by pressing the "save theme as favourite" button under file. If you have edited an existing theme but don't want to lose it, make sure you untick the replace existing button.

  • HT201407 hi..I cant activate my Iphone 5. I bought this from someone who cant remember her apple password and even the email address that she used to set up the account.What am I gonna do now....How can I activate my Iphone. what are my options...pls help

    hi..I cant activate my Iphone 5. I bought this from someone who cant remember her apple password and even the email address that she used to set up the account.What am I gonna do now....How can I activate my Iphone. what are my options...pls help me.thank you

    Activation Lock in iOS 7  >  http://support.apple.com/kb/HT5818
    hannibalfromlemery wrote:
    .I cant activate my Iphone 5. I bought this from someone
    The Apple ID and Password that was Originally used to Activate the iDevice is required.
    If you cannot get this information from the seller
    Removing a device from a previous owner’s account
    You need to return the Device for a refund, as you will not be able to re-activate it.

  • I just found my old ipod touch (i think 1st generation) and would like to let my toddler use it instead of my phone.  I am trying to download apps but it say I need to update to 4.3 but it won't let me update.  I have the most recent itunes. any idea why?

    I just found my old ipod touch (i think 1st generation) and would like to let my toddler use it instead of my phone.  I am trying to download apps but it say I need to update to 4.3 but it won't let me update.  I have the most recent itunes. any idea why? I saw a thread saying to purchase the newest software (that was posted a few years ago) I paid 4.95 for the software and it's still saying it can't be updated.  Am I just SOL??

    The 1G iPod can only go as high as 3.1.3. The 1G does not have an internal speaker or volume buttons on the upper left edge.
    Identifying iPod models
    To more easily find compatible apps:
    iOSSearch - search the iTunes store for compatible apps.
    Apple Club - filter apps by iOS version.

  • Hi. I am just about to move from the UK to Kuwait. Will I have any problems using my iPhone 4 and able to join a local carrier using this device please?

    Hi. I am just about to move from the UK to Kuwait. Will I have any problems using my iPhone 4 and able to join a local carrier using this device please?

    If your phone is locked to a particular carrier, you must contact them to request they unlock it. Once they've taken care of that and you've followed the instructions to complete the unlock process, you will be able to use the phone elsewhere.
    ~Lyssa

  • I opened my iPod Touch up to fix my home button. When i closed it back up it had a white screen. I tried pressing lock and home button for 10 seconds and it worked but while i'm using it it goes white with lines on the screen. Help please

    I opened my iPod Touch up to fix my home button. When i closed it back up it had a white screen. I tried pressing lock and home button for 10 seconds and it worked but while i'm using it it goes white with lines on the screen. Help please. This has been happening for a while and i've tried everything but it doesn't work.

    Try:
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Maybe you are looking for

  • How to clear the location history in reminder?

    heyy guys. serious talk here. please please and please help me to figure this out. how to clear the location that had i been used in reminder? i've search from day to day. but there aren't answer yet. grr

  • Can't display power icon on toolbar

    The power icon on my Toshiba laptop disappeared.  I right clicked the notification area, clicked customize, and it won't let me turn on the option to display the icon.  I read somewhere to go to the control panel and go to a certain section but that

  • Getting started, clients per AP & scaling questions

    Hi. This is my first time into the wireless side. I need to scale a solution for a large campus. I have an idea of the number of APs required to cover the area, but I don't know how many end users can connect to a given AP, and presume there is some

  • F.13 with payment method

    Hello Guru    My client is doing payment outside of SAP but same time client is looking to do clearing in SAP without any payment medium (just a dummy clearing) for specific Payment method(wires) .My initial thought is to schedule F.13 .Is this a cor

  • Logic 7 crashes during "Updating tree .."

    I´m running Logic 7.2.3 ( also Logic 8, but the problem affects only L7 ). Since yesterday, without changing anything, I can´t open L7 anymore. When opening L7 or a L7 song a white rectangle appears on the screen always in the middle of the "Updating