Gnucash, from aur, and fatal error at start...
Hi!
I have compiled and installed gnucash from aur, but then I run it and shows an error...:
$ gnucash
ERROR: no code for module (g-wrap gw-glib)
any idea?
gnucash is currently orphaned, and there are errors in the PKGBUILD - specifically, the dependencies are not entered correctly, which is presumably the reason why you haven't installed them. Change the depends line to this:
depends=('gtkhtml' 'aqbanking' 'g-wrap' 'goffice' 'libgnomeprintui')
and rebuild/reinstall it, after building/installing the dependencies.
General advice - always read the comments on AUR packages.
Similar Messages
-
JDK + JRE installation from AUR, and OPENJDK6 removal...
Seems to me most of the discussion about this is outdated, so here I go:
I have been running into some issues with programming Arduino. Replaced my avr-gcc with avr-gcc svn, but to no avail. So now I'm going for the standard distribution package of Arduino on most, if not on linux, systems (MACOSX, Windows) that uses JDK and JRE from Sun Oracle. Got the PKGBUILD tarballs from AUR and successfully built my own JRE install, but here is my issue:
[denizen@FIDO-ARCH jre]$ sudo pacman -Rdu openjdk6 && sudo pacman -U jre-7-3-x86_64.pkg.tar.xz
checking dependencies...
warning: removing openjdk6 from target list
there is nothing to do
resolving dependencies...
looking for inter-conflicts...
:: jre and openjdk6 are in conflict (java-runtime). Remove openjdk6? [y/N] y
error: failed to prepare transaction (could not satisfy dependencies)
:: eclipse: requires java-environment
:: netbeans: requires java-environment
So I'm assuming I need JDK as well, but when I build JDK from AUR I get:
[denizen@FIDO-ARCH jdk]$ makepkg PKGBUILD
==> Making package: jdk 7-3 (Fri Sep 30 00:45:39 PHT 2011)
==> Checking runtime dependencies...
==> Missing Dependencies:
-> jre
==> Checking buildtime dependencies...
==> ERROR: Could not resolve all dependencies.
So has anyone done this without issue already? Am I missing a step or command? I'm at a loss at the moment.
Last edited by reidel (2011-09-29 16:56:58)Now, can you tell me how to recycle the JDK packaged in the JRE AUR PKGBUILD script fetched from the internet? Its such a bother having to download it again when I already have a viable copy.
Edit: What I mean is reuse the JDK package gotten from Sun Oracle which currently resides in the src dir of my JRE AUR package build. I tried copying it straight to the src folder of the JDK builder, but to no avail... currently looking through makepkg wiki...
Last edited by reidel (2011-09-29 17:15:08) -
Hi Just bought ipad 2 off someone they showed it to me working and the removed it from icloud and reset. now have started to setup at home and it is asking for an apple id he or i do not know what should i do ?
Restore the Device as New. See Section 6 here... http://support.apple.com/kb/HT4137
Note:
Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818 -
I have an iphone 5s, does not boot, blinking white screen with black logo, when trying itunes restore from mac and pc, error code 4013 which is usb error, any ideas? Does a totally dead battery have that effect? I have had it plugged in to a computer overnight, but maybe does not charge when totally dead?
Please help, thanks in advance all1Hi eggroll77,
Welcome to Apple Support Communities.
That alert codes does suggest there is a USB related issue. If you haven’t already, try the troubleshooting suggestions in the article linked below.
iOS: Restore errors 4005, 4013, and 4014
I hope this helps.
-Jason -
HP Mini 210-2090NR malware and fatal error after update
Hi,
I have an HP Mini 210-2090NR with Win 7 starter. I had malware that kept trying to contact websites like adclick, etc. It tried an auto update and then got a one line "fatal error". Now it will boot to the quickweb but not the OS. I tapped ESC until I got a menu and tried F11 but the screen just goes completely blank. Is the recovery partition toast or is there another way to access it?
Thanks,
MattThe error message- Replace hard Disk 1 is a clear indication that your hard drive has gone faulty on the Notebook and needs to be replaced.
I would strongly recommend you to back up your files if its possible and apart from replacing the hard drive with a new one, there is no other option to fix this issue on the Notebook
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!! -
[OSS 4] Fatal error when starting oss-linux-free
I receive the following error when attempting to start this daemon as the thread title states. I've tried running the command as root with no difference. OSS was installed from PKGBUILD. I did not receive any strange (to me, anyway) errors/warnings during compiling. Arch64 install.
sudo /etc/rc.d/oss-linux-free start
:: Starting OSS/Open source driver [BUSY]
Relinking OSS kernel modules for "2.6.24-ARCH SMP preempt mod_unload "
This may take few moments - please stand by...
OSS build environment set up for REGPARM kernels
Building module osscore
Failed to compile OSS
make -C /lib/modules/2.6.24-ARCH/build M=/usr/lib/oss/build modules
make[1]: Entering directory `/usr/src/linux-2.6.24-ARCH'
Building modules, stage 2.
MODPOST 1 modules
FATAL: section header offset=8737600 in file 'vmlinux' is bigger then filesize=3174400
make[2]: *** [__modpost] Error 1
make[1]: *** [modules] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.24-ARCH'
make: *** [default] Error 2
Relinking the OSS kernel modules failed
[FAIL]
Any insight into the problem would be a huge help and very appreciated.Topic started on the 4Front OSS forums.
http://4front-tech.com/forum/viewtopic.php?t=2602 -
Fatal Error when starting Power Saver on Tecra M9
When I try to start Power Saver on a Tecra M9 (21), I get a Fatal error; code: 0X51A.
I've tried various combinations of uninstalling, cleaning registry, rebooting, etc., but everytime I reinstall (version 7), I get the same fatal error.Hi
You are speaking about the Power saver for XP? Am I right?
Please note that you have to install all drivers, tools and utilities in the right order!!!
The installation instruction should be checked and you should follow the guide lines.
Very important;
The common modules is a necessary tool to get all other Toshiba tools running properly. Furthermore there is a power saver driver and utility. The driver must be installed before the utility!!!
Please dont forget this!!! -
Thunderbird3-x86-64 from AUR and Provider for Google plugin not workin
Hi
I compiled Thunderbird 3 from AUR which has the Lightning plugin in it v1.0b2pre and want Provider for Google (sync google calender to lightning) and I'm not getting it working. I have tried serveral versions including the nightly build and does not install. Has anyone got this plugin working?
MHi
Thanks I've tried that but Provider for Google's preferences is not available for me to select - its greyed out.
I compiled Thunderbird from AUR which had Lightning pre-installed. I disabled it and installed your recommended version - lightning is now 1.0b1 and Provider is 0.6b1. Did you install Thunderbird from extra and not AUR?
M
Okay uninstalled my compiled thunderbird and installed from extra - its called shredder from what I see. Installed lightning and provider as you have indicated and still Provider's preference button is grayed out. is this due to remnents of previous installation? what can I do to fix?
Last edited by majikins (2010-02-27 16:09:11) -
Macbook launching and running slowly and server error on start up.
Please help! My macbook pro has been acting up lately (not exclusively since installing Mavericks, but I don't think that has helped either). The macbook has been taking longer than usual to start up initially (boot) and to start each program (with no particular program being worse than others).
The screen often freezes when browsing online, even when browsing low text-base websites.
I am also receiving this error when I start up the computer, but this has been happening for some time now so I'm unsure of it's impact:
"There was a problem connecting to the server 'wrt610n' The server may not exist or it is unavailable at the time" I don't recognise that server name, so how do I go about fixing that?
I have included a copy of the Etresoft EtreCheck report which I am hoping will help!
EtreCheck version: 1.9.12 (48)
Report generated 18 June 2014 7:15:43 PM AEST
Hardware Information:
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software:
Mac OS X 10.7.5 (11G63) - Uptime: 0 days 0:1:31
Disk Information:
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
disk0s1 (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (155.8 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information:
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
LaCie Rugged Mini USB 3 1 TB
Maddie's Things! (disk1s1) /Volumes/Maddie's Things!: 1 TB (758.19 GB free)
Apple Computer, Inc. IR Receiver
Thunderbolt Information:
Apple, Inc. MacBook Pro
Kernel Extensions:
[loaded] com.LaCie.ScsiType00 (1.2.9 - SDK 10.6) Support
[loaded] com.jmicron.driver.jmPeripheralDevice (2.0.4) Support
[loaded] com.lacie.driver.LaCie_RemoteComms (1.0.1 - SDK 10.4) Support
[loaded] com.oxsemi.driver.OxsemiDeviceType00 (1.28.13 - SDK 10.5) Support
Launch Daemons:
[running] com.lacie.desktopmanager.service.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
Launch Agents:
[loaded] com.lacie.eventsactions.launcher.agent.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.spotify.webhelper.plist Support
User Login Items:
iTunesHelper
Public
TomTomHOMERunner
LDMStatusItem
Android File Transfer Agent
Internet Plug-ins:
AdobePDFViewerNPAPI: Version: 10.1.9 Support
DirectorShockwave: Version: 11.6.8r638 Support
AdobePDFViewer: Version: 10.1.9 Support
QuickTime Plugin: Version: 7.7.1
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
SharePointBrowserPlugin: Version: 14.0.0 Support
Safari Extensions:
Searchme: Version: 1.3
Ebay Shopping Assistant: Version: 1.1
Slick Savings: Version: 2.0
Amazon Shopping Assistant: Version: 1.1
Audio Plug-ins:
iSightAudio: Version: 7.7.1 - SDK 10.7
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.3 - SDK 10.7
User iTunes Plug-ins:
TuneUp Visualizer: Version: 2.4.0 - SDK 10.7 Support
3rd Party Preference Panes:
None
Time Machine:
Time Machine not configured!
Top Processes by CPU:
47% WebProcess
31% Safari
2% mds
2% WindowServer
1% hidd
Top Processes by Memory:
185 MB Safari
153 MB WebProcess
57 MB WindowServer
57 MB Preview
45 MB Finder
Virtual Memory Information:
2.20 GB Free RAM
865 MB Active RAM
139 MB Inactive RAM
833 MB Wired RAM
180 MB Page-ins
0 B Page-outsThanks Sham for your reply.
I forgot to update the group.
The issue turned out be disabling the mcafee while installing the CQ instance.
mcafee was blocking the osgi bundles to get installed and my login and welcome screen were not up due to missing bundles.
Bundle information: 122 bundles in total, 119 bundles active, 3 active fragments, 0 bundles resolved, 0 bundles installed.
Now, I have disabled the mcafee, while installing the CQ and now it successfully started and with all the bundles installed.
Bundle information: 231 bundles in total, 224 bundles active, 7 active fragments, 0 bundles resolved, 0 bundles installed.
Hope it helps some one!
Best Regards,
Durga -
On some computers we get a fatal error when trying to scroll through the document using the wheel on the mouse but it works fine when using the keys or clicking at the right of the window to scroll.
Any ideas?
MikeWe don't, in general, update already released versions, so no.
If you absolutely must have a particular fix in a version that has already been released you need to log a one-off request with Support.
I suggest you upgrade to 10.1.2.2. -
PSC 1410 driver and fatal error during installation
Good day people.
I have problem installing my PSC 1410 driver into my laptop. everytime i install it, it yields fatal error during installation.
i'm running on Window 7 Ultimate 64 bits.
Can anyone please help me?
Thank youhillie120388 wrote:
Good day people.
I have problem installing my PSC 1410 driver into my laptop. everytime i install it, it yields fatal error during installation.
i'm running on Window 7 Ultimate 64 bits.
Can anyone please help me?
Thank you
hillie120388 wrote:
Good day people.
I have problem installing my PSC 1410 driver into my laptop. everytime i install it, it yields fatal error during installation.
i'm running on Window 7 Ultimate 64 bits.
Can anyone please help me?
Thank you
hillie120388 wrote:
Good day people.
I have problem installing my PSC 1410 driver into my laptop. everytime i install it, it yields fatal error during installation.
i'm running on Window 7 Ultimate 64 bits.
Can anyone please help me?
Thank you -
Cdrecord and others - error when starting burning
HI,
I need some help with this. I googled three hours for solution.
I need to burn win iso image to DVD-R medium.
Here is the error:
$ cdrecord -v -sao dev=/dev/sr0 cswindows7professionalx86.iso
TOC Type: 1 = CD-ROM
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.11
SCSI buffer size: 64512
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'Slimtype'
Identification : 'DVD A DS8A1P '
Revision : 'CA11'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0011 (DVD-R sequential recording)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording) (current)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1182464 = 1154 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
FIFO size : 4194304 = 4096 KB
Track 01: data 2278 MB
Total size: 2617 MB (259:17.68) = 1166826 sectors
Lout start: 2617 MB (259:19/51) = 1166826 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Blocks total: 1166826 Blocks current: 1166826 Blocks remaining: 0
Speed set to 2770 KB/s
Starting to write CD/DVD at speed 2.0 in real SAO mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Errno: 5 (Input/output error), reserve track scsi sendcmd: no error
CDB: 53 00 00 00 00 00 11 CD EA 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.010s timeout 200s
wodim: Cannot open new session.
Writing time: 0.222s
wodim: fifo had 64 puts and 0 gets.
wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
Here is output of wodim -v -V -inq dev=/dev/sr0
# wodim -v -V -inq dev=/dev/sr0
TOC Type: 1 = CD-ROM
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.11
SCSI buffer size: 64512
Executing 'test unit ready' command on Bus 0 Target 0, Lun 0 timeout 40s
CDB: 00 00 00 00 00 00
cmd finished after 0.001s timeout 40s
Executing 'test unit ready' command on Bus 0 Target 0, Lun 0 timeout 40s
CDB: 00 00 00 00 00 00
cmd finished after 0.001s timeout 40s
Executing 'inquiry' command on Bus 0 Target 0, Lun 0 timeout 40s
CDB: 12 00 00 00 24 00
cmd finished after 0.000s timeout 40s
Inquiry Data : 05 80 05 32 5B 00 00 00 53 6C 69 6D 74 79 70 65 44 56 44 20 41 20 20 44 53 38 41 31 50 20 20 20 43 41 31 31
Executing 'inquiry' command on Bus 0 Target 0, Lun 0 timeout 40s
CDB: 12 00 00 00 60 00
cmd finished after 0.000s timeout 40s
Inquiry Data : 05 80 05 32 5B 00 00 00 53 6C 69 6D 74 79 70 65 44 56 44 20 41 20 20 44 53 38 41 31 50 20 20 20 43 41 31 31 32 30 30 36 2F 31 32 2F 30 31 20 31 39 3A 30 35 20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Inquiry Data : ...2[...SlimtypeDVD A DS8A1P CA112006/12/01 19:05 ........................................
Executing 'test unit ready' command on Bus 0 Target 0, Lun 0 timeout 40s
CDB: 00 00 00 00 00 00
cmd finished after 0.001s timeout 40s
Executing 'mode sense g1' command on Bus 0 Target 0, Lun 0 timeout 40s
CDB: 5A 00 3F 00 00 00 00 00 08 00
cmd finished after 0.004s timeout 40s
Mode Sense Data 01 68 41 00 00 00 00 00
Executing 'test unit ready' command on Bus 0 Target 0, Lun 0 timeout 40s
CDB: 00 00 00 00 00 00
cmd finished after 0.001s timeout 40s
Executing 'mode sense g1' command on Bus 0 Target 0, Lun 0 timeout 40s
CDB: 5A 00 2A 00 00 00 00 00 02 00
cmd finished after 0.002s timeout 40s
Mode Sense Data 00 36
Mode Sense Data (converted) 33
Executing 'test unit ready' command on Bus 0 Target 0, Lun 0 timeout 40s
CDB: 00 00 00 00 00 00
cmd finished after 0.001s timeout 40s
Executing 'mode sense g1' command on Bus 0 Target 0, Lun 0 timeout 40s
CDB: 5A 00 2A 00 00 00 00 00 38 00
cmd finished after 0.002s timeout 40s
Mode Sense Data 00 36 41 00 00 00 00 00 2A 2E 3F 37 F5 77 29 23 2B 48 01 00 08 00 2B 48 00 10 0A D2 0A D2 00 01 00 00 00 00 0A D2 00 01 00 00 0A D2 00 00 00 00 00 00 00 00 00 00 00 00
Mode Sense Data (converted) 33 41 00 00 2A 2E 3F 37 F5 77 29 23 2B 48 01 00 08 00 2B 48 00 10 0A D2 0A D2 00 01 00 00 00 00 0A D2 00 01 00 00 0A D2 00 00 00 00 00 00 00 00 00 00 00 00
Mode Sense Data 33 41 00 00 2A 2E 3F 37 F5 77 29 23 2B 48 01 00 08 00 2B 48 00 10 0A D2 0A D2 00 01 00 00 00 00 0A D2 00 01 00 00 0A D2 00 00 00 00 00 00 00 00 00 00 00 00
Mode Page Data 2A 2E 3F 37 F5 77 29 23 2B 48 01 00 08 00 2B 48 00 10 0A D2 0A D2 00 01 00 00 00 00 0A D2 00 01 00 00 0A D2 00 00 00 00 00 00 00 00 00 00 00 00
Executing 'test unit ready' command on Bus 0 Target 0, Lun 0 timeout 40s
CDB: 00 00 00 00 00 00
cmd finished after 0.001s timeout 40s
Executing 'mode sense g1' command on Bus 0 Target 0, Lun 0 timeout 40s
CDB: 5A 00 2A 00 00 00 00 00 38 00
cmd finished after 0.002s timeout 40s
Mode Sense Data 00 36 41 00 00 00 00 00 2A 2E 3F 37 F5 77 29 23 2B 48 01 00 08 00 2B 48 00 10 0A D2 0A D2 00 01 00 00 00 00 0A D2 00 01 00 00 0A D2 00 00 00 00 00 00 00 00 00 00 00 00
Mode Sense Data (converted) 33 41 00 00 2A 2E 3F 37 F5 77 29 23 2B 48 01 00 08 00 2B 48 00 10 0A D2 0A D2 00 01 00 00 00 00 0A D2 00 01 00 00 0A D2 00 00 00 00 00 00 00 00 00 00 00 00
Mode Sense Data 33 41 00 00 2A 2E 3F 37 F5 77 29 23 2B 48 01 00 08 00 2B 48 00 10 0A D2 0A D2 00 01 00 00 00 00 0A D2 00 01 00 00 0A D2 00 00 00 00 00 00 00 00 00 00 00 00
Executing 'test unit ready' command on Bus 0 Target 0, Lun 0 timeout 40s
CDB: 00 00 00 00 00 00
cmd finished after 0.001s timeout 40s
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'Slimtype'
Identification : 'DVD A DS8A1P '
Revision : 'CA11'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
I tried to add my account and programs like cdrecord edt. to group optical but with no result.
Please, help me. Thank you!As wodim obviously has problems with your burner/firmware, then have you tried growisofs from dvd+rw-tools, or schilling's original cdrecord, which is much more up-2-date than wodim with regards to dvd-writing ?
Personally, I always use wodim for cd-r writes(since wodim works fine for me on cd-r, I do not need to use schilling's "better" version), and then growisofs for all dvd-type writes, and that works great atleast on the 4 different drive-types i've tested it with...
growisofs -dvd-compat -Z /dev/sr0=cswindows7professionalx86.iso
Last edited by mhertz (2011-06-15 13:59:43) -
Haguichi won't build from AUR, and won't build from source tarball.
I managed to get Hamachi installed. Go me. But I like having a frontend for things like that, so I tried to build Haguichi from the AUR. Didn't work. I downloaded the source tarball, and running ./configure returned the same error as yaourt.
redpill% ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for pkg-config... /usr/bin/pkg-config
checking for dmcs... /usr/bin/dmcs
checking pkg-config is at least version 0.9.0... yes
checking for GTK_SHARP_20... yes
checking for NOTIFY_SHARP... yes
checking for GCONF_SHARP_20... yes
checking for GLIB_SHARP_20... yes
checking for DBUS_SHARP_10... no
configure: error: Package requirements (dbus-sharp-1.0) were not met:
No package 'dbus-sharp-1.0' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables DBUS_SHARP_10_CFLAGS
and DBUS_SHARP_10_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
I made sure the dependencies were installed and updated to the latest versions, but it still won't build. What am I doing wrong?Scimmia wrote:Did you read the comments on the AUR page?
Just did. I guess I'm still a bit noobish -
Was having trouble burning CD. Uninstalled iTunes from PC the reinstalled iTunes. The first installation I got a messaghe saying that download was interrupted. I restarted te download and completed it. Then got another error message that a registry file was missing that is used in downloading and burning CD-s. I figured with a fresh download, it should have been fixed???? Solution anyone and thanks?
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
Hi
i have a sharepoint 2010 farm
and it has total 6 servers, and in all servers i did the latest windows update
and after update i found the sharepoint 2010 administraion service was stopped and when i start its given error message
Log Name: System
Source: Service Control Manager
Date: 7/12/2014 3:01:15 PM
Event ID: 7000
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: SPFAPP01.xyz.gov.local
Description:
The SharePoint 2010 Administration service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7000</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2014-07-12T12:01:15.109313700Z" />
<EventRecordID>81462</EventRecordID>
<Correlation />
<Execution ProcessID="576" ThreadID="3372" />
<Channel>System</Channel>
<Computer>SPFAPP01.xyz.gov.local</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">SharePoint 2010 Administration</Data>
<Data Name="param2">%%1053</Data>
</EventData>
</Event>
adilAre you able to run the Config Wizard? Are there any helpful messages in the Application Event Log or in Applications and Services Logs -> Microsoft -> SharePoint Products -> Shared -> Operational?
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.
Maybe you are looking for
-
How can I add new images to a saved book in Lightroom 4? Help please!
As the title suggests, I have created a saved book in LR4. I saved it not because I had finished but because I wanted to protect my work to date. Now I cannot add new images, although I can work with (move and remove) the exisintg images in the book.
-
How do I open a GoLive backup .site file in Dreamweaver CC?
Hi, I need to recover an old website. It's a .site file that was created in GoLive CS2. I now have Dreamweaver CC and need to find out how I can import/convert that site to open it in Dreamweaver. Please help!! I am using Mac Mountain Lion OSX.
-
Good afternoon, I am researching how to set up and configure about 30 different Apple devices in my network. From my research, I have found that the method I believe I am going use, is using a Mac Mini with OS X Server, and utilizing the Configurato
-
Issue downloading Camera Raw update: 'Update Not Applicable'
Hi, I'm running CS5 Extended 12.0x64, and started shooting with a canon 60D (previously 450D). i am having the issue of the Camera Raw images being unreadable, I presumed because of the new camera, but I am unable to install the 7.1 update on my Mac.
-
I am looking for the solution to batch rename multiple avi files simply. In iphoto, I just select a bunch of image files and using the ctrl+Shift+CMD keyboard shortcut, I input the name something like 'boat_trip_kids' I get the files renamed instantl