Go url issue - no value passed through in filter

hi,
I have issue with go url
I insert the following formula but the filter is not applied (the value does not come through)
in the target report I made a condition for "- Invoice date HIR"."INV Month" as is prompted; still nothing;
it does navigate, and opens the target report with options md, but filter is not applied;
I think i went trough most of posts on the forum but am still unable to correct the code
Id appreciate any suggestions
'<--a href= saw.dll?GO&path=/shared/DRILL_DOWN
&Options=md
&Action=Navigate
&P0=1
&P1=eq
&P2= "- Invoice date HIR"."INV Month"
&P3=’||Periods."Month"||’
style=”text-decoration:none;”>'
||'LINK'
||
'<--/a>'

hi
changed;
now the code looks following but OBI would not accept it at all as formula
''||'LINK'||''
i get an errror
[nQSError: 10058] A general error has occurred. [nQSError: 27002] Near <=>: Syntax error [nQSError: 26012] . (HY000) ...
however; I kicked out this 'style...' entirely to make things easier
''||'LINK'||''
it does drill but with the previous error (now without 'decoration''...)
Error getting drill information: SELECT "- Invoice date HIR"."INV Month" saw_0, FROM "TEST" WHERE "- Invoice date HIR"."INV Month" = ''||Periods."Month"||''

Similar Messages

OBIEE Column filter prompt issue :: Display Value, Pass Value

Hi All,
Is it possible to display a value in the prompt and pass another value to the report in OBIEE?
Eg. Display Employee Name but internally pass Employee Key values.
Right now in column filter prompt, I have given an SQL query in SQL results field to fetch Employee Names and Employee Keys.
When I select an Employee Name then Employee Key gets displayed in the prompt (selected values on the left) field.
Filter on column property is set to Employee Key.
My requirement is when an Employee Name is selected, then the same Employee Name should be displayed in the prompt field. Internally Employee Key should be passed.
Is this possible? Please help.
Regards,
Sam

Hi,
It can be done with the help of an intermediate report and filter based on other request but you need to check the performance. You need to create a report.pull on employee key in that report and put employee name as 'Is Prompted' . Then in your parent report use 'Filter based on other request' and select 'Employee Key' from the intermediate report created.
In this way used only have to select employee name in prompt and employee key willl be passed to parent report. Check the performance before you use this approach as 'filter based on other request' can cause performance issues.
Regads,
Sandeep

Check boxes not checked when value passed through a request

I've a URL which sets default-check box values -
f?p=121:41:&SESSION.::YES::P41_OWNER,P41_AI_TYPE:&BUGDB_USER.,\5,6,7\
where "\5,6,7\" is the value of check-boxes.
On Page 41, I compute P41_AI_TYPE as follows (as a Process - On Load Before Regions) -
begin
if (:P41_AI_TYPE = '5,6,7') then
*:P41_AI_TYPE := '6:7:5';*
end if;
end;
There are 3 conditional reports that are generated on the page 41 based on these values. i.e. 5,6,7. All the three reports are displayed indicating that the reports do indeed see the P41_AI_TYPE variable.
The "Debug" shows
0.03: ...Session State: Saved Item "P41_AI_TYPE" New Value="6:7:5"
prior to displaying the checkbox
The "Session" also shows -
121     41     P41_AI_TYPE     Checkbox     6:7:5     U
However none of the check-boxes are checked.
What could be the issue ?
Edited by: ygore on Aug 26, 2009 10:41 AM

0.01:
0.02: S H O W: application="121" page="41" workspace="" request="" session="692841112185158"
0.02: Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-us
0.02: alter session set nls_language="AMERICAN"
0.02: alter session set nls_territory="AMERICA"
0.02: NLS: CSV charset=WE8MSWIN1252
0.02: ...NLS: Set Decimal separator="."
0.02: ...NLS: Set NLS Group separator=","
0.02: ...NLS: Set date format="DD-MON-RR"
0.02: ...Setting session time_zone to dbtimezone
0.02: NLS: Language=en-us
0.02: Application 121, Authentication: CUSTOM2, Page Template: 5653628457062181
0.02: ...Session ID 692841112185158 can be used
0.02: ...Application session: 692841112185158, [email protected]
0.03: ...Determine if user "YPGORE" workspace "943324391470666" can develop application "121" in workspace "943324391470666"
0.03: Session: Fetch session header information
0.03: Saving g_arg_names=P41_OWNER and g_arg_values=YGORE
0.03: ...Session State: Saved Item "P41_OWNER" New Value="YGORE"
0.03: Saving g_arg_names=P41_AI_TYPE and g_arg_values=5,6,7
0.03: ...Session State: Saved Item "P41_AI_TYPE" New Value="5,6,7"
0.03: ...Metadata: Fetch page attributes for application 121, page 41
0.03: Fetch session state from database
0.03: Branch point: BEFORE_HEADER
0.03: Fetch application meta data
0.04: Computation point: BEFORE_HEADER
0.04: Processing point: BEFORE_HEADER
0.04: Show page template header
0.04: Computation point: AFTER_HEADER
0.04: Processing point: AFTER_HEADER
Root Cause Analysis
([email protected]) | Logout
     Reports
Edit
     Classify
Edit
     Administration
Edit
EditEditEdit
Summary Report     Area Report     Custom Reports
0.05: Region: Action Items Report
Action Items Report
0.05: Computation point: BEFORE_BOX_BODY
0.05: ...Evaluate condition "NEVER" for computation of item: P41_AI_TYPE
0.05: Processing point: BEFORE_BOX_BODY
0.05: ...Process "Compute AI Type": PLSQL (BEFORE_BOX_BODY) begin if (:P41_AI_TYPE = '5,6,7') then :P41_AI_TYPE := '6:7:5'; :P41_AI_TYPE_COMMA := '5,6,7'; end if; end;
*0.05: ...Session State: Saved Item "P41_AI_TYPE" New Value="6:7:5"*
0.05: ...Session State: Saved Item "P41_AI_TYPE_COMMA" New Value="5,6,7"
0.05: Region: Enter Bug User Id
0.06: Item: P41_AREA TEXT
Area :      Edit
0.06: Item: P41_OWNER TEXT
     AI Owner :      Edit
0.06: Item: P41_AI_PERCENT_LOW_MARK TEXT
     AI %age comp. range      Edit
0.06: Item: P41_AI_PERCENT_HI_MARK TEXT
     And      Edit
0.06: Item: P41_AI_TYPE CHECKBOX
     AI Type :
Test-Generic     TestCase     Development
Edit
0.06: Item: P41_AI_ID TEXT_WITH_ENTER_SUBMIT
     AI Id :      Edit
0.06: Item: P41_GO BUTTON
     Go
Edit
0.06: Item: P41_AI_TYPE_COMMA HIDDEN
          Edit
0.06: Region: Test-Generic Action Items Report
     Test-Generic Action Items ReportEdit
0.06: show report
0.07: determine column headings
0.07: activate sort
0.07: parse query as: RMTOOLS_QAINIT
0.07: binding: ":P41_AREA"="P41_AREA" value="%"
0.07: binding: ":P41_OWNER"="P41_OWNER" value="YGORE"
0.07: binding: ":P41_AI_PERCENT_LOW_MARK"="P41_AI_PERCENT_LOW_MARK" value="0"
0.07: binding: ":P41_AI_PERCENT_HI_MARK"="P41_AI_PERCENT_HI_MARK" value="100"
0.07: binding: ":P41_AI_ID"="P41_AI_ID" value="%"
0.08: print column headings
0.08: rows loop: 15 row(s)
No action items in this category.
0.08: Region: TestCase Action Items Report
     TestCase Action Items ReportEdit
0.08: show report
0.08: determine column headings
0.08: activate sort
0.09: parse query as: RMTOOLS_QAINIT
0.09: binding: ":P41_AREA"="P41_AREA" value="%"
0.09: binding: ":P41_OWNER"="P41_OWNER" value="YGORE"
0.09: binding: ":P41_AI_PERCENT_LOW_MARK"="P41_AI_PERCENT_LOW_MARK" value="0"
0.09: binding: ":P41_AI_PERCENT_HI_MARK"="P41_AI_PERCENT_HI_MARK" value="100"
0.09: binding: ":P41_AI_ID"="P41_AI_ID" value="%"
0.09: print column headings
0.09: rows loop: 15 row(s)
No action items in this category.
0.09: Region: Development Action Items Report
     Development Action Items ReportEdit
0.10: show report
0.10: determine column headings
0.10: activate sort
0.10: parse query as: RMTOOLS_QAINIT
0.10: binding: ":P41_AREA"="P41_AREA" value="%"
0.10: binding: ":P41_OWNER"="P41_OWNER" value="YGORE"
0.10: binding: ":P41_AI_PERCENT_LOW_MARK"="P41_AI_PERCENT_LOW_MARK" value="0"
0.10: binding: ":P41_AI_PERCENT_HI_MARK"="P41_AI_PERCENT_HI_MARK" value="100"
0.10: binding: ":P41_AI_ID"="P41_AI_ID" value="%"
0.11: print column headings
0.11: rows loop: 15 row(s)
No action items in this category.
0.11: Region: Print Region
     Print Report
Edit
0.11: Computation point: AFTER_BOX_BODY
0.11: Processing point: AFTER_BOX_BODY
0.11: Computation point: BEFORE_FOOTER
0.11: Processing point: BEFORE_FOOTER
0.11: Show page tempate footer
Home     Application 121     Edit Page 41     Create     Session     Activity     No Debug     Hide Edit Links     Show Edit Links
0.11: Computation point: AFTER_FOOTER
0.11: Processing point: AFTER_FOOTER
0.11: Log Activity:
0.11: End Show:

Pass through Url

I have a form where the user has an option of clicking submit
which submits the entire form or select a some abcdefg... which
submits the selected alpha and passes through a URL. The problem
now is that I want the user to select a radio button which tells me
the DB they want to search.
How wiould I pass the value of the radion button through url
to know the users seacr option?
I Need to put the value from the javascript in the URL and pass
the Value to the next form
<a href="/admin/Leadsresult.cfm?search=a" onclick="return
checkradio();">A</a>
This my script which I want to submit the value when user
clicks the above
function checkradio()
var check =document.b.criteria.value;
if (check ==1)
document.b.checkoption.value ='Cp';
else
document.b.checkoption.value ='Cb';
document.form.action="sult.cfm";
document.form.submit();*/
}

quote:
Originally posted by:
umuayo
The form fields are not being submitted when you click on the
hyperlinked data.
It only get submitted when you use the Submit button.
Oh, I missed that part. I'm not sure, but I don't think you
can use js to change variables in an anchor tag after the page has
been loaded. Have you considered using two links instead of one?

LabVIEW 6.1 If For Loop count terminal is zero then value going through the loop is not passed on to the output of the loop

Hello, one of our customers just encountered an execution error in a vi running under LabVIEW 6.1, which doesn't exist under LabVIEW 5.1 or 6.01. I have a simple vi that has two encapsulated For Loops. Two string arrays go in, one goes out of the outer loop. Inside the outer loop the first array is indexed. The string which results from this indexing is compared with all other strings from the second string array in the inner loop. If it matches one of the strings of the second array, it is not outputted, otherwise this string goes through the inner For Loop to the output of the inner loop and from there to the output of the outer loop. The count
terminal of the outer/inner loop is connected to the Array Size of the first/second string array. If the second array is empty, that means that the element in test from the first arry cannot match anything from the second array, so the element in test is send to the output of the inner loop and from there to the output of the outer loop. This works fine in LabVIEW 5.1 and 6.01, but NOT in LabVIEW 6.1. In LabVIEW 6.1 the inner loop is never executed if the count value is zero (which is correct), but the data line running through the loop is not executed either, which is different to what LabVIEW 5.1 and 6.01 do. There, the input string is sent to the output of the inner loop correctly even if the loop counter is zero. The solution is easy - I just have to connect the output of the outer loop to the data line BEFORE it enters the inner loop. But: I don't know if this is a LabVIEW 6.1 bug or if it is supposed to be a feature, but it brings some incompatibility in programming between the
different LabVIEW versions.
Best regards,
Gabsi

Hi,
When a for-loop runs zero times, all outputs are 'undefined' (and should
be).
Besides, how would LV know what the output of a not executed routine should
be?
It might be handled differently in LV5 and LV6, which is unfortunate. In
both cases, the result is undefined.
It's not a bug. It's just something that should be avoided in any LV
version.
> The solution is easy - I just have to connect the
> output of the outer loop to the data line BEFORE it enters the inner
> loop. But: I don't know if this is a LabVIEW 6.1 bug or if it is
In some cases this does the trick. But if the data is changed in the inner
loop, this will effect the results if the N is not zero.
Technically, I think the output in this construction is also 'undefined'.
But LV handles this as expected / desired.
Another solution is to use a shift register. If N is zero, the input is
directly passed through to the output.
Regards,
Wiebe.
"Gabs" wrote in message
news:[email protected]...
> LabVIEW 6.1 If For Loop count terminal is zero then value going
> through the loop is not passed on to the output of the loop
>
> Hello, one of our customers just encountered an execution error in a
> vi running under LabVIEW 6.1, which doesn't exist under LabVIEW 5.1 or
> 6.01. I have a simple vi that has two encapsulated For Loops. Two
> string arrays go in, one goes out of the outer loop. Inside the outer
> loop the first array is indexed. The string which results from this
> indexing is compared with all other strings from the second string
> array in the inner loop. If it matches one of the strings of the
> second array, it is not outputted, otherwise this string goes through
> the inner For Loop to the output of the inner loop and from there to
> the output of the outer loop. The count terminal of the outer/inner
> loop is connected to the Array Size of the first/second string array.
> If the second array is empty, that means that the element in test from
> the first arry cannot match anything from the second array, so the
> element in test is send to the output of the inner loop and from there
> to the output of the outer loop. This works fine in LabVIEW 5.1 and
> 6.01, but NOT in LabVIEW 6.1. In LabVIEW 6.1 the inner loop is never
> executed if the count value is zero (which is correct), but the data
> line running through the loop is not executed either, which is
> different to what LabVIEW 5.1 and 6.01 do. There, the input string is
> sent to the output of the inner loop correctly even if the loop
> counter is zero. The solution is easy - I just have to connect the
> output of the outer loop to the data line BEFORE it enters the inner
> loop. But: I don't know if this is a LabVIEW 6.1 bug or if it is
> supposed to be a feature, but it brings some incompatibility in
> programming between the different LabVIEW versions.
> Best regards,
> Gabsi

Pass through authentication (function_)

I wrote many functions before, but NEVER a function to pass through authentication
Here are some of the specs
In this example, an institution will be accepting tuition and fee payments against bills that are stored in the our system. In addition to the minimum ebill authentication parameters, the institution would like to pass us a full name to display when welcoming the user, control the users primary e-mail address, and restrict the payment method on a per user basis.
URL     url     This will be issued to you by your project manager. It should be of the form https://pleasepay.com/schoolname/payer.do
User Id     user_id     The unique identifier for the user within the institution. This is typically a student ID. (in our database)
Full Name     full_name     Users full name. Example “John Smith”. (in our database)
Email Address     email     Primary email address.     in (our database)
Payment Method     paymentMethod     Payment methods allowed for this user.
Allowed values:
“none” :no payments accepted
“ach” :ach is the only accepted
“cc” :credit cards only accepted
“ach_cc” :credit card and ach      16
Key     key     The shared key that is issued to you by your project manager.
Time Zone     tz     The time zone you are located in. Valid values are:
“E” :Eastern time zone
“C” :Central time zone
“M” :Mountain time zone
“P” :Pacific time zone     1
function get_payment_url_test(
        url         in varchar2,
        user_id     in varchar2,
        full_name   in varchar2,
        email       in varchar2,
        pay_method in varchar2,
        key         in varchar2,
        tz          in varchar2
    ) return varchar2. Here is my questions: I know I need to have cursor to check on the user_id, full name, email (those values are store in our DATABASE. The URL and the key are giving to me. Do I have to hard code the url in the cursor and stored in a variable so I can check that the url coming in (url in varchar2) is equal to the url in my cursor? The same with the key?

I saved the url the user_id and the full_name in a custom table, it is workinng, but I would like
to pass a message like
if user_id is null then
raise_application_error(-20101, 'User ID is missing.');
what is doing now if that it checks on the cursor and if any of the paramters if false
it will return the first message in the --- return mesages that is fine the cursor is not retrieving any data, but I want to be more 'friendly' to the user, and if the user
don't enter the id say something like null id or if is wrong wrong id, invalid id etc...
wha
function get_user_url(
        url         in varchar2,
        user_id     in varchar2,
        full_name   in varchar2,
        email       in varchar2,
        pay_method in varchar2,
        key         in varchar2,
        tz          in varchar2
    ) return varchar2
    is
Audit Trail:
10/25/2010
T
Change History:
      timestamp varchar2(20);
      v_pidm      saturn_midd.synelck.synelck_pidm%TYPE;
      v_user_id   saturn_midd.synelck.synelck_id%TYPE;
      v_full_name saturn_midd.synelck.synelck_name%TYPE;
      v_email     saturn_midd.synelck.synelck_email%TYPE;
      v_url       saturn_midd.synelck.synelck_email%TYPE;
      v_key       saturn_midd.synelck.synelck_key%TYPE;
      v_pay_method varchar2(6);
    /* this table saturn_midd.synelck is inserted with all the students (with bills),
    the url and the key, in the way the function is going to validate the url, the id
    and the key against the values in the table*/
    CURSOR pass_the_test_cur is
    SELECT
    synelck_pidm,
    synelck_id,
    synelck_name,
    synelck_email,
    synelck_url,
    synelck_key
    from
    saturn_midd.synelck
    where
    synelck_url = url
    and synelck_id = user_id
    and synelck_key = key
    AND SUBSTR(synelck_name,1,120) = full_name;
     BEGIN
      IF pass_the_test_cur%ISOPEN
      THEN
          CLOSE pass_the_test_cur;
      END IF;
        OPEN pass_the_test_cur;
             FETCH pass_the_test_cur
                   INTO v_pidm,v_user_id,v_full_name,v_email,v_url,v_key;
        if pay_method = 'none' then v_pay_method := 'none';
          elsif
            pay_method = 'ach' then v_pay_method := 'ach' ;
          elsif
             pay_method = 'cc' then v_pay_method := 'cc';
          elsif
              pay_method = 'ach_cc' then v_pay_method := 'ach_cc' ;
       end if;
          timestamp := get_epoch_timestamp(CURRENT_TIMESTAMP);
        If (v_url is not null and v_user_id is not null and v_key is not null
            and v_full_name is not null and v_key is not null
            and v_email is not null and v_pay_method is not null)
        then
             return url || '?userId=' || escape(v_user_id, TRUE, character_set) ||
            '&' || 'fullName=' || escape(v_full_name, TRUE, character_set) ||
            '&' || 'email=' || escape(v_email, TRUE, character_set) ||
            '&' || 'paymentMethod=' || escape(v_pay_method, TRUE, character_set) ||
            '&' || 'timestamp=' || timestamp ||
            '&' || 'hash=' || get_md5_hash_value(v_user_id || v_full_name || v_email || v_pay_method || timestamp || v_key);
        end if;
        --- return mesages
       if v_url is null then
            raise_application_error(-20101, 'Inalid log on chek: Id .');
        end if;
        if v_user_id is null then
            raise_application_error(-20101, 'User ID is missing.');
        end if;
        if key is null then
            raise_application_error(-20101, 'Key is missing.');
        end if;
        if v_full_name is null then
            raise_application_error(-20101, 'Name is missing.');
        end if;
        if v_email is null then
            raise_application_error(-20101, 'eMail address is missing.');
        end if;
        if v_pay_method is null then
            raise_application_error(-20101, 'Payment method is missing.');
        end if;
    end l;Edited by: peace4all on Oct 26, 2010 7:13 AM

Data has changed after passing through FIFO?

Dear experts,
I am currently working on a digital triangular shaping using the 7966R FPGA + 5734 AI. I am using LabView 2012 SP1.
Some days ago I have encountered a problem with my FIFOs that I have not been able to solve since. I'd be glad if somebody could point out a solution/ my error.
Short description:
I am writing U16 variables between ~32700-32800 to a U16 configured FIFO. The FIFO output does not coincide with the data I have been writing to the FIFO but is rather bit-shifted or something is added. This problem does not occure if I execute the VI on the dev. PC with simulated input.
What I have done so far:
I am reading all 4 channels of the 5734 inside a SCTL. The data is stored in 4 feedback nodes I am applying a triangular shaping to channel 0 and 1 by using 4 FIFOs that have been prefilled with a predefined number of zeros to serve as buffers. So it's something like (FB = Feedback node):
A I/O 1 --> FB --> FIFO 1 --> FB --> FIFO 2 --> FB --> Do something
A I/O 2 --> FB --> FIFO 3 --> FB --> FIFO 4 --> FB --> Do something
This code shows NO weird behaviour and works as expected.
The Problem:
To reduce the amount of FIFOs needed I then decided to interleave the data and to use only 2 FIFOs instead of 4. You can see the code in the attachment. As you can see I have not really changed anything to the code structure in general.
The input to the FIFO is a U16. All FIFOs are configured to store U16 data.
The data that I am writing to the FIFO can be seen in channel 0 of the output attachment.
The output after passing through the two FIFOs can be seen in channel 2 of the same picture.
The output after passing through the first FIFO (times 2) can be seen in channel 3 of the picture.
It looks like the output is bit-shifted and truncated as it enters Buffer 1. Yet the difference between the input and output is not exactly a factor of 2. I also considered the possibility that the FIFO adds both write operations (CH0 + CH1) but that also does not account for the value of the output.
The FIFOs are all operating normally, i.e. none throws a timeout. I also tried several different orders of reading/writing to the FIFOs and different ways of ensuring this order (i.e. case strucutres, flat and stacked sequence). The FIFOs are also large enough to store the amount of data buffered no matter if I write or read first.
Thank you very much,
Bjorn
Attachments:
FPGA-code.png ‏61 KB
FPGA-output.png ‏45 KB

During the last couple of days I tried the following:
1. Running the FPGA code on the development PC with simulated I/O. The behavior was normal, i.e. like I've intended the code to perform.
2. I tested the code on the development PC with the square and sine wave generation VI as 'simulated' I/O. The code performed normal.
3. I replaced the FIFOs with queues and ran my logic on the dev. PC. The logic performed totally normal.
4. Right now the code is compiling with constants as inputs like you suggested...
I am currently trying to get LabView 2013 on the development machine. It seems like my last real hope is that the issue is a bug in the XILINX 13.4 compiler tools and that the 14.4 tools will just make it disappear...
Nevertheless I am still open for suggestions. Some additional info about my FIFOs of concerne:
Buffer 1 and 2:
- Type: Target Scoped
- Elements Requested: 1023
- Implementation: Block Memory
- Control Logic: Target Optimal
- Data Type: U16
- Arbitrate for Read: Never Arbitrate
- No. Elements Per Read: 1
- Arbitrate for Write: Never Arbitrate
- No. Elements Per Write: 1
The inputs from the NI 5734 are U16 so I am wirering the right data type to the FIFOs. I also don't have any coercion dots within my FPGA VI. And so far it has only occured after the VI has been compiled onto the FPGA. Could some of the FIFOs/block memory be corrupted because we have written stuff onto the FPGA too often?

Cisco ASA 5505 L2TP Pass through

I am having trouble with L2TP pass through on an ASA 5505 device.
L2TP server: OSX 10.6
I can connect with any OSX system and it works fine straight away.
When connecting with a windows computer I get a 789 error. "Error 789: The L2TP connection attempt failed because the security layer encountere a processing error during the initial negotiations with the remote computer."
I did not setup or configure the device to start with and apart from this issue its working fine so I am hessitant at trying to just mess around too much to try and find the problem.
I am using the ASDM 6.4 to manage the device.
Ports look to be forwarded correctly; 1701, 4500 & 500 UDP.
Im just looking for other common issues?
Rob

Below is the commands you wanted.
Where you see: IPNOTWHATIWASEXPECTING
This is an IP I dont know. possible and old IP address.
and
default-domain value domain-notcorrect.local
This is an old domain from years ago.
Result of the command: "show run crypto"
crypto ipsec transform-set aes-sha esp-aes esp-sha-hmac
crypto ipsec transform-set aes-192-sha esp-aes-192 esp-sha-hmac
crypto ipsec transform-set aes-256-sha esp-aes-256 esp-sha-hmac
crypto ipsec transform-set 3des-sha esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set transform-amzn esp-aes esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map map-dynamic 1 set pfs group5
crypto dynamic-map map-dynamic 1 set transform-set aes-256-sha aes-192-sha aes-sha 3des-sha
crypto dynamic-map map-dynamic 2 set pfs
crypto dynamic-map map-dynamic 2 set transform-set aes-256-sha aes-192-sha aes-sha 3des-sha
crypto dynamic-map map-dynamic 3 set pfs
crypto dynamic-map map-dynamic 3 set transform-set aes-256-sha aes-192-sha aes-sha 3des-sha
crypto dynamic-map map-dynamic 4 set transform-set aes-256-sha aes-192-sha aes-sha 3des-sha
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set peer IPNOTWHATIWASEXPECTING3
crypto map outside_map 1 set transform-set ESP-DES-SHA
crypto map outside_map 2 match address acl-amzn
crypto map outside_map 2 set pfs
crypto map outside_map 2 set peer IPNOTWHATIWASEXPECTING IPNOTWHATIWASEXPECTING
crypto map outside_map 2 set transform-set transform-amzn
crypto map outside_map 255 ipsec-isakmp dynamic map-dynamic
crypto map outside_map interface outside
crypto isakmp identity address
crypto isakmp enable outside
crypto isakmp policy 1
authentication pre-share
encryption aes-256
hash sha
group 5
lifetime 86400
crypto isakmp policy 2
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto isakmp policy 3
authentication pre-share
encryption aes-256
hash sha
group 1
lifetime 86400
crypto isakmp policy 11
authentication pre-share
encryption aes-192
hash sha
group 5
lifetime 86400
crypto isakmp policy 12
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto isakmp policy 13
authentication pre-share
encryption aes-192
hash sha
group 1
lifetime 86400
crypto isakmp policy 21
authentication pre-share
encryption aes
hash sha
group 5
lifetime 86400
crypto isakmp policy 22
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto isakmp policy 23
authentication pre-share
encryption aes
hash sha
group 1
lifetime 86400
crypto isakmp policy 31
authentication pre-share
encryption 3des
hash sha
group 5
lifetime 86400
crypto isakmp policy 32
authentication rsa-sig
encryption des
hash sha
group 1
lifetime 86400
crypto isakmp policy 33
authentication pre-share
encryption 3des
hash sha
group 1
lifetime 86400
crypto isakmp policy 34
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
Result of the command: "show run group-policy"
group-policy evertest internal
group-policy evertest attributes
dns-server value 10.100.25.252
vpn-idle-timeout 720
vpn-tunnel-protocol IPSec l2tp-ipsec
pfs enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpnsplittunnel
default-domain value domain-notcorrect.local
group-policy petero internal
group-policy petero attributes
dns-server value 10.100.25.252
vpn-idle-timeout 720
pfs enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpnsplittunnel
default-domain value domain-notcorrect.local
group-policy awsfilter internal
group-policy awsfilter attributes
vpn-filter value amzn-filter
group-policy vpnpptp internal
group-policy vpnpptp attributes
dns-server value 10.100.25.252
vpn-tunnel-protocol l2tp-ipsec
group-policy vanheelm internal
group-policy vanheelm attributes
dns-server value 10.100.25.252
vpn-idle-timeout 720
vpn-tunnel-protocol IPSec l2tp-ipsec
pfs enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpnsplittunnel
default-domain value domain-notcorrect.local
group-policy ciscoVPNuser internal
group-policy ciscoVPNuser attributes
dns-server value 10.100.25.10
vpn-idle-timeout 720
pfs enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpnsplittunnel
default-domain value domain-notcorrect.local
group-policy chauhanv2 internal
group-policy chauhanv2 attributes
dns-server value 10.100.25.252
vpn-idle-timeout 720
pfs enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpnsplittunnel
default-domain value domain-notcorrect.local
group-policy oterop internal
group-policy oterop attributes
dns-server value 10.100.25.252
vpn-idle-timeout 720
vpn-tunnel-protocol IPSec l2tp-ipsec
pfs enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpnsplittunnel
default-domain value domain-notcorrect.local
group-policy Oterop internal
group-policy Oterop attributes
dns-server value 10.100.25.252
vpn-idle-timeout 30
group-policy chauhanv internal
group-policy chauhanv attributes
dns-server value 10.100.25.252
vpn-idle-timeout 30
vpn-tunnel-protocol IPSec l2tp-ipsec
group-policy bnixon2 internal
group-policy bnixon2 attributes
dns-server value 10.100.25.252
vpn-idle-timeout 720
vpn-tunnel-protocol IPSec l2tp-ipsec
pfs enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpnsplittunnel
default-domain value domain-notcorrect.local
Result of the command: "show run tunnel-group"
tunnel-group ciscoVPNuser type remote-access
tunnel-group ciscoVPNuser general-attributes
address-pool vpnippool
default-group-policy ciscoVPNuser
tunnel-group ciscoVPNuser ipsec-attributes
pre-shared-key *****
tunnel-group petero type remote-access
tunnel-group petero general-attributes
address-pool vpnippool
default-group-policy petero
tunnel-group petero ipsec-attributes
pre-shared-key *****
tunnel-group oterop type remote-access
tunnel-group oterop general-attributes
address-pool vpnippool
default-group-policy oterop
tunnel-group oterop ipsec-attributes
pre-shared-key *****
tunnel-group vanheelm type remote-access
tunnel-group vanheelm general-attributes
address-pool vpnippool
default-group-policy vanheelm
tunnel-group vanheelm ipsec-attributes
pre-shared-key *****
tunnel-group chauhanv type remote-access
tunnel-group chauhanv general-attributes
default-group-policy chauhanv
tunnel-group Oterop type remote-access
tunnel-group Oterop general-attributes
default-group-policy Oterop
tunnel-group chauhanv2 type remote-access
tunnel-group chauhanv2 general-attributes
address-pool vpnippool
default-group-policy chauhanv2
tunnel-group chauhanv2 ipsec-attributes
pre-shared-key *****
tunnel-group bnixon2 type remote-access
tunnel-group bnixon2 general-attributes
address-pool vpnippool
default-group-policy bnixon2
tunnel-group bnixon2 ipsec-attributes
pre-shared-key *****
tunnel-group vpnpptp type remote-access
tunnel-group vpnpptp general-attributes
address-pool vpnippool
default-group-policy vpnpptp
tunnel-group IPNOTWHATIWASEXPECTING4 type ipsec-l2l
tunnel-group IPNOTWHATIWASEXPECTING4 ipsec-attributes
pre-shared-key *****
tunnel-group evertest type remote-access
tunnel-group evertest general-attributes
address-pool vpnippool
default-group-policy evertest
tunnel-group evertest ipsec-attributes
pre-shared-key *****
tunnel-group evertest ppp-attributes
authentication ms-chap-v2
tunnel-group IPNOTWHATIWASEXPECTING3 type ipsec-l2l
tunnel-group IPNOTWHATIWASEXPECTING3 ipsec-attributes
pre-shared-key *****
tunnel-group IPNOTWHATIWASEXPECTING2 type ipsec-l2l
tunnel-group IPNOTWHATIWASEXPECTING2 general-attributes
default-group-policy awsfilter
tunnel-group IPNOTWHATIWASEXPECTING2 ipsec-attributes
pre-shared-key *****
isakmp keepalive threshold 10 retry 3
tunnel-group IPNOTWHATIWASEXPECTING type ipsec-l2l
tunnel-group IPNOTWHATIWASEXPECTING general-attributes
default-group-policy awsfilter
tunnel-group IPNOTWHATIWASEXPECTING ipsec-attributes
pre-shared-key *****
isakmp keepalive threshold 10 retry 3
Result of the command: "show vpn-sessiondb detail remote filter protocol L2TPOverIPsec"
INFO: There are presently no active sessions of the type specified
Result of the command: "show vpn-sessiondb detail remote filter protocol L2TPOverIPsecOverNAT"
INFO: There are presently no active sessions of the type specified

Issue with parameter passing in ie7 to php xml

Hi
I wondered if anyone could offer a little advice what the issue is here.
I have a page with xml generated from php in a separte file and presented by a dataset in spry.
The xml is OK and in firefox it all works but ie seems to barf on it.
The situation is this:
I have a jump menu on a front page that provides a url with anumeric parameter passed like this
platforms.php?platform_id=1
This parameter is picked up by php on the platforms.php page using the $_GET Array and is passed into the code in my Spry dataset to the file that runs my query and returns my xml- so basically the page displays a dataset filtered on this parameter id.
It works perfectly in FF.
In IE if I link straight to the page without a parameter at all- so platforms.php the page loads OK using the default parameter I have set up in the top of this page to send the default id of 1 to the code page so the spry query says platform_sql.php?platform_id=1 and the xml generator is fine with thisiel. ie I do a
if(isset($_GET['platform_id'])){
$platform=$_GET['platform_id'];
}else{
$platform=1;
The dataset loads Ok in IE but when I pass a parameter in the url from my jump menu IE gives a blank SPRY table i- it momentarily appears with just the placeholders for my dataset elements then vanishes. The source code of the page shows the correct id was set in the spry data going to my query file.
There is an error in ie saying there is a javascript error but its not any help- in ie fashion- FF shown no such errors.
I thought this might be a data type thing again in the dataset but its not - I have set the elements returned to simple strings but it still does not work.
Is there a problem passing in a parameter like this to a spry dataset?

After about half a day of mucking round I found the problem and a solution to this problem.
What appeared to have happened was that some of the older content in my database used html originally encoded using a WYSWYG editor called ktml.
Later data uses Tiny MCE. It looks like the character set of the two formats is slightly different and as a result some characters rendered incorrectly when passed through XML parsing where it specifies the character set as utf-8.
Firefox on the whole seems to ignore the issue though looking at the raw xml output of my php-xml code- where "-" characters were (dashes) there was a question mark character shown. None the less in actual use on my page the xml was produced and the dataset worked out.
In IE, it barfed at these same characters and failed to return the xml dataset.
What confused the issue more was some of my smaller datasets if they by chance never had a "-" character in rendered OK in IE- hence my default dataset (platform_id=1) worked in IE. After much experimenting I noticed other ids worked too if there was never such a character.
How I got round it was to wrap my server side data in the utf8_encode() function, and now all my xml is clean.
The javascript error being thrown was a red herring though I could not tell until I managed to run my page in ie7 with Visual Studio Express error console running- I had this on a spare machine at work so could debug with it.
All sorted now- now just need to find away to wrap all my datasets in collapsible panels that work.
K

Unhandled Exception: System.TimeoutException: The request channel timed out while waiting for a reply after 00:01:59.9139778.Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding.

Hi,
I created a simple plugin and since i wanted to use Early Binding i added Xrm.cs file to my solution.After i tried registering the plugin (using the Plugin Registration Tool) the plugin does not gets registered and i get the below mentioned Exception.
Unhandled Exception: System.TimeoutException: The request channel timed out while waiting for a reply after 00:01:59.9139778. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time allotted to this
operation may have been a portion of a longer timeout.
Server stack trace:
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.Xrm.Sdk.IOrganizationService.Update(Entity entity)
at Microsoft.Xrm.Sdk.Client.OrganizationServiceProxy.UpdateCore(Entity entity)
at Microsoft.Crm.Tools.PluginRegistration.RegistrationHelper.UpdateAssembly(CrmOrganization org, String pathToAssembly, CrmPluginAssembly assembly, PluginType[] type)
at Microsoft.Crm.Tools.PluginRegistration.PluginRegistrationForm.btnRegister_Click(Object sender, EventArgs e)
Inner Exception: System.TimeoutException: The HTTP request to 'https://demoorg172.api.crm.dynamics.com/XRMServices/2011/Organization.svc' has exceeded the allotted timeout of 00:01:59.9430000. The time allotted to this operation may have been a portion of a
longer timeout.
at System.ServiceModel.Channels.HttpChannelUtilities.ProcessGetResponseWebException(WebException webException, HttpWebRequest request, HttpAbortReason abortReason)
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
Inner Exception: System.Net.WebException: The operation has timed out
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
And to my Surprise after i remove the Xrm.cs file from my solution the Plugin got registered!
Not understanding what exactly is the issue.
Any Suggestions are highly appreciated.
Thanks,
Shradha


Hello Shardha,
I really appreciate that you have faced this issue.This is really very strange issue and basically it occurs because of big size of your early bound class and slow internet
connection.
I would strictly recommend you to reduce the file size of your early bound class and then register.By default early bound class is created for all the entities which are
present in CRM(System entities as well custom entities).Such kind of early bound classes takes lots of time to register on server and hence timeout exception comes.
There is some standard define to reduce the size of early bound class.Please follow the link to get rid from big size of early bound class.
Create a new C# class library project in Visual Studio called SvcUtilFilter.
In the project, add references to the following:
CrmSvcUtil.exe(from sdk) This exe has the interface we will implement.
Microsoft.Xrm.Sdk.dll (found in the CRM SDK).
System.Runtime.Serialization.
Add the following class to the project:
using System;
using System.Collections.Generic;
using System.Xml.Linq;
using Microsoft.Crm.Services.Utility;
using Microsoft.Xrm.Sdk.Metadata;
namespace SvcUtilFilter
    /// <summary>
    /// CodeWriterFilter for CrmSvcUtil that reads list of entities from an xml file to
    /// determine whether or not the entity class should be generated.
    /// </summary>
    public class CodeWriterFilter : ICodeWriterFilterService
        //list of entity names to generate classes for.
        private HashSet<string> _validEntities = new HashSet<string>();
        //reference to the default service.
        private ICodeWriterFilterService _defaultService = null;
        /// <summary>
        /// constructor
        /// </summary>
        /// <param name="defaultService">default
implementation</param>
        public CodeWriterFilter( ICodeWriterFilterService defaultService )
            this._defaultService = defaultService;
            LoadFilterData();
        /// <summary>
        /// loads the entity filter data from the filter.xml file
        /// </summary>
        private void LoadFilterData()
            XElement xml = XElement.Load("filter.xml");
            XElement entitiesElement = xml.Element("entities");
            foreach (XElement entityElement in entitiesElement.Elements("entity"))
                _validEntities.Add(entityElement.Value.ToLowerInvariant());
        /// <summary>
        /// /Use filter entity list to determine if the entity class should be generated.
        /// </summary>
        public bool GenerateEntity(EntityMetadata entityMetadata, IServiceProvider services)
            return (_validEntities.Contains(entityMetadata.LogicalName.ToLowerInvariant()));
        //All other methods just use default implementation:
       public bool GenerateAttribute(AttributeMetadata attributeMetadata, IServiceProvider services)
            return _defaultService.GenerateAttribute(attributeMetadata, services);
        public bool GenerateOption(OptionMetadata optionMetadata, IServiceProvider services)
            return _defaultService.GenerateOption(optionMetadata, services);
        public bool GenerateOptionSet(OptionSetMetadataBase optionSetMetadata, IServiceProvider services)
            return _defaultService.GenerateOptionSet(optionSetMetadata, services);
        public bool GenerateRelationship(RelationshipMetadataBase relationshipMetadata, EntityMetadata otherEntityMetadata, IServiceProviderservices)
            return _defaultService.GenerateRelationship(relationshipMetadata, otherEntityMetadata, services);
        public bool GenerateServiceContext(IServiceProvider services)
            return _defaultService.GenerateServiceContext(services);
This class implements the ICodeWriterFilterService interface. This interface is used by the class generation
utility to determine which entities, attrributes, etc. should actually be generated. The interface is very simple and just has seven methods that are passed metadata info and return a boolean indicating whether or not the metadata should be included
in the generated code file.
For now I just want to be able to determine which entities are generated, so in the constructor I read from an XML
file (filter.xml) that holds the list of entities to generate and put the list in a Hashset. The format of the xml is this:
<filter>
<entities>
    <entity>systemuser</entity>
    <entity>team</entity>
    <entity>role</entity>
    <entity>businessunit</entity>
</entities>
</filter>
Take a look at the methods in the class. In the GenerateEntity method, we can simply check the EntityMetadata parameter
against our list of valid entities and return true if it's an entity that we want to generate.
For all of the other methods we want to just do whatever the default implementation of the utility is. Notice
how the constructor of the class accepts a defaultService parameter. We can just save a reference to this default service and use it whenever we want to stick with the default behavior. All of the other methods in the class just call the default
service.
To use our extension when running the utility, we just have to make sure the compiled DLL and the filter.xml file
are in the same folder as CrmSvcUtil.exe, and set the /codewriterfilter command-line argument when running the utility (as described in the SDK):
crmsvcutil.exe /url:http://<server>/<org>/XrmServices/2011/Organization.svc /out:sdk.cs /namespace:<namespace> /codewriterfilter:SvcUtilFilter.CodeWriterFilter,SvcUtilFilter
/username:[email protected] /password:xxxx
That's it! You now have a generated sdk.cs file that is only a few hundred kilobytes instead of 5MB.
One final note: There is actually a lot more you can do with extensions to the code generation utility.
For example: if you return true in the GenerateOptionSet method, it will actually generated Enums for each CRM picklist (which it doesn't normally do by default).
Also, the source code for this SvcUtilFilter example can be found here.
Use at your own risk, no warranties, etc. etc.
Please mark as a answer if this post is useful to you.

Environment variables not passed through to player in flexunit 4.1.0-beta3

fyi, to get flexunit-4.1.0-beta3 FlexUnit4AntTasks invocation of flashplayer to not be rejected by the vncserver, i needed to modify the FlexUnitLauncher to pass through the environment variables to the command environment.
the reason this is required, i think, is the use of Runtime.exec() directly in CustomPlayerCommand -- in flexunit-4.0.0, the same function was accomplished using the ant executor, which does passthrough by default.
anyway, curious if anyone else has seen this issue, or if i'm doing something dumb.
--- flexunit/flexunit-4.1.0-beta3/flexunit-flexunit-da29198/FlexUnit4AntTasks/src/org/flexuni t/ant/launcher/FlexUnitLauncher.java    (revision 7250)
+++ flexunit/flexunit-4.1.0-beta3/flexunit-flexunit-da29198/FlexUnit4AntTasks/src/org/flexuni t/ant/launcher/FlexUnitLauncher.java    (revision 7251)
@@ -79,7 +82,13 @@
       command.setSwf(swf);
       if (runHeadless())
-         command.setEnvironment(new String[]{ "DISPLAY=:" + xvncStart.getCurrentDisplay() });
+         Map<String, String> env = System.getenv();
+         List<String> envArgs = new ArrayList<String>();
+         for (Map.Entry<String, String> entry : env.entrySet()) {
+            envArgs.add(entry.getKey() + "=" + entry.getValue());
+         }
+         envArgs.add("DISPLAY=:"+xvncStart.getCurrentDisplay());
+         command.setEnvironment(envArgs.toArray(new String[0]));
          LoggingUtil.log("Setting DISPLAY=:" + xvncStart.getCurrentDisplay());

ok. i went looking for a JIRA link somewhere around here and couldn't find it. do you have a URL handy?
there are a couple of other things too:
you probably want trustDirectory.mkdirs() rather than mkdir() in TrustFile.java
you probably want CustomPlayerCommand.setLocalTrusted() -- my player command isn't in the machine's path, but i still want to be able to touch the trust file. So I copied the trustFile.add() stuff from FlashPlayerCommand.launch() into CustomPlayerCommand.launch(). probably a better solution would be refactoring CustomPlayerCommand to be more like FlashPlayerCommand.
anyway, if you want patches, tell me where to put them and i'll post some.

Guest LAN and DHCP Options not passing through

Managed to get the Guest LAN up and running for wired clients and all's working well. Users are sat behind a proxy and if I force the use of a appropriate wpad file I can get the WLC auth to happen and then push off to the proxy.
I'm trying to use option 252 in DHCP to present the WPAD url. Only issue that happens is that while the DHCP server on the egress interface is handing out addresses to clients on the ingress interface correctly, the WLC doesn't appear to be handing through the option 252 I have set in DHCP. I've used network monitor to see what the dhcp request process is dishing out in terms of options, and all look good if I'm not behind the WLC.
Anyone know if theres a limitation on the WLC that prevents DHCP options being passed through to the guest LAN?
TIA

When configured as a DHCP server, some of the firewalls do not support DHCP requests from a relay agent. The WLC is a relay agent for the client. The firewall configured as a DHCP server ignores these requests. Clients must be directly connected to the firewall and cannot send requests through another relay agent or router. The firewall can work as a simple DHCP server for internal hosts that are directly connected to it. This allows the firewall to maintain its table based on the MAC addresses that are directly connected and that it can see. This is why an attempt to assign addresses from a DHCP relay are not available and the packets are discarded. PIX Firewall has this limitation.
For more information please refer to the link-http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008070ba8f.shtml

Internet slow on SSID passing through anchor

Hai,
I have a wireless network with following structure.
2 WLCs for corporate
2 WLCs for Guest which is on DMZ zone.
EOIP is configured between CORP WLC to guest WLC and everything is working fine.
We have 1 corporate SSID for Inside users and trusted users.
1 for Guest users, customers and untrusted users which is passing through EOIP tunnel.
Now we ave noticed that internet speed is very slow for guest users. But from corporate its very fast and both of them are using the same internet connection.
I have done the following test.
Connected my PC to DMZ switch and tested the internet speed from guest vlan .It was very fast .But when it is on wireless, speeds is very slow.
Do we need to do something on the WLC config for solve this issue?
Thanks
Sreelal

Hi Fredrick, thanks for your response. We've configured tcp-adjust-mss at 1363 byte value and our performance problem
don't exist anymore.
Preventing Fragmentation
Unfortunately, there is no method to prevent LWAPP fragmentation in the controller or access points until code version 6.0 with the CAPWAP protocol.
To avoid fragmentation of client packets enable TCP Maximum Segment Size (MSS) control on the controller and lightweight access points in code versions 6.0 and later.
This feature allows connected CAPWAP access points to re-write client TCP SYN packets with the configured maximum segment size to optimize large data transfers and prevent fragmentation when CAPWAP encapsulated. The valid range is from 536 to 1363 bytes, and it is recommended to use a 1363 byte value.
Configure it from the CLI using this command:
config ap tcp-adjust-mss { enable | disable } { all | ap-name } tcp_mss_value

"Message from Webpage (error) There was an error in the browser while setting properties into the page HTML, possibly due to invalid URLs or other values. Please try again or use different property values."

I created a site column at the root of my site and I have publishing turned on. I selected the Hyperlink with formatting and constraints for publishing.
I went to my subsite and added the column. The request was to have "Open in new tab" for their hyperlinks. I was able to get the column to be added and yesterday we added items without a problem.
The problem arose when, today, a user told me that he could not edit the hyperlink. He has modify / delete permissions on this list.
He would edit the item, in a custom list, and click on the address "click to add a new hyperlink" and then he would get the error below after succesfully putting in the Selected URL (http://www.xxxxxx.com), Open
Link in New Window checkbox, the Display Text, and Tooltip:
"Message from Webpage There was an error in the browser while setting properties into the page HTML, possibly due to invalid URLs or other values. Please try again or use different property values."
We are on IE 9.0.8.1112 x86, Windows 7 SP1 Enterprise Edition x64
The farm is running SharePoint 2010 SP2 Enterprise Edition August 2013 CU Mark 2, 14.0.7106.5002
and I saw in another post, below with someone who had a similar problem and the IISreset fixed it, as did this problem. I wonder if this is resolved in the latest updated CU of SharePoint, the April 2014 CU?
Summary from this link below: Comment out, below, in AssetPickers.js
//callbackThis.VerifyAnchorElement(HtmlElement, Config);
perform IISReset
This is referenced in the item below:
http://social.technet.microsoft.com/Forums/en-US/d51a3899-e8ea-475e-89e9-770db550c06e/message-from-webpage-error-there-was-an-error-in-the-browser-while-setting?forum=sharepointgeneralprevious
TThThis is possibly the same information that I saw, possibly from the above link as reference.
http://seanshares.com/post/69022029652/having-problems-with-sharepoint-publishing-links-after
Again, if I update my SharePoint 2010 farm to April 2014 CU is this going to resolve the issue I have?
I don't mind changing the JS file, however I'd like to know / see if there is anything official regarding this instead of my having to change files.
Thank you!
Matt

We had the same issue after applying the SP2 & August CU. we open the case with MSFT and get the same resolution as you mentioned.
I blog about this issue and having the office reference.
Later MSFT release the Hotfix for this on December 10, 2013 which i am 100% positive should be part of future CUs.
So if you apply the April CU then you will be fine.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Static NAT pass-through; can not get to work

I am not having any luck getting a static NAT pass-through to work.
BM3.8/NW6.5 all patched to the latest patches (no betas). IPFLT is NOT
loaded.
My internal network on one LAN all have 10.100.xxx.xxx private addresses.
Dynamic NAT works great.
I have secondary public IP addresses bound to my public NIC. Static NAT
mapping between the secondary public IP addresses and the couple of
individual private addresses work just fine. In other words, all has been
working fine.
I need to give one of those internal resources its public IP address
(change it's private to its public).
OK, I went into the NAT table and changed the proper public <-> private to
public <-> public (identical addresses). I changed the internal computer
to it's public address/mask with the same default gateway the server is
using. The internal computer can now only ping itself; can't even ping
it's default gateway. I did reinitialize, and also restarted. I can not
get the pass-through connection to work.
Any thoughts will be well received.
Bob

Robert,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Go url issue - no value passed through in filter

Similar Messages

Maybe you are looking for