Going wireless with FiOS--do I need Airport?

Hi, everyone. I'm signed up to get FiOS internet later this month. They provide an Actiontec MI-424-WR wireless router. The FiOS rep told me he thinks I'll also need an Airport base station, but do I? The Actiontec is a wireless access point just like the Airport--why would I need two?
I want to print wirelessly, too, and hope this setup will work:
--Plug the HP 4ML printer's Farallon Ethernet bridge into the Actiontec. Yup, my SCSI laserprinter is 15 years old, but thanks to the bridge, it works with all my Macs.
--Plug the Epson 777i inkjet's USB connection into the iMacDV (no wireless card) and plug the iMac's Ethernet cable into the Actiontec. Here's the only place I can see where I'd need Airport (maybe Express)--replacing the iMac as the bridge from a USB printer to the Actiontec's Ethernet.
TIA for advice!

PhillyJan,
I do have some direct experience with Verizon FiOS, and the Actiontec router. There are some very weird things that go on between the FiOS "box" and the router, where the box actually takes control of the router's settings. Also, the only access to admin functions on the router are through ethernet, so you can't configure on the fly using a wireless connection.
However, with a little research and patience, it can all be made to work well (it certainly is fast enough ;-)). First, you have to figure out the "default" admin access settings on the router. The authentication strings for the Actiontec can be found in the documentation (I don't recall what they are off the top of my head), but it might help if you could query the person that does the installation while he/she is present.
What I found particularly annoying was that I couldn't change the settings for the wireless router (SSD, password, etc.). Apparently, these settings are controlled by the FiOS box, and will reset themselves even if you perform a "hard reset" on the router. When it reboots, the FiOS box (again, apparently) loads a preset configuration into the router. All I could ever manage to do was to reset the router's admin login to the factory default, thereby gaining the ability to ascertain the password to connect wirelessly.
Perhaps there is a way to actually change the authentication settings/protocols on the router, but I couldn't find any in the time I had (this was not my hardware, but a family member's). Again, the installation tech may be able to help. Regardless, the router works perfectly well, once you know the password for connection.
For wireless printing, I really do recommend an Airport Express. If you can manage placing it where it can be connected to a stereo at the same time, all the better. It is easily configured to connect to the existing wireless network, and it will do so seamlessly. It is also great to take along when you travel, in case you find a hotel with ethernet, but no wireless service.
Keep in mind that a single Airport Express could serve to wireless share both of your printers, using a USB hub. Hmmm.
Scott

Similar Messages

Going Wireless with G5

Hi there,
Here is my problem....
I currently have a wire going into my Mac from a modem so that I can use internet. THE mac is in a very akward position and I want some mobility with it. In short I want it to be wireless. Is this possible with the model I have? If not what would I need?
Cheers,
HArry

If your model has an Airport Card fitted (Look in  > About This Mac > More info > Network > Airport), you can use an Airport Express Base Station to create a wi-fi network by connecting the AEBS to the router by ethernet. The setup instructions with the AEBS are simple and easy to follow.
If the model doesn't have an Airport card fitted you can use two AEBSs, one connected to the router and the other to the Mac (also with an ethernet connection). The one connected to the router is the master and creates the network, the one connected to the Mac is used in Bridge mode to connect to the existing network.
Finding and fitting the correct card for your Mac is likely to be more expensive than buying two AEBSs, though it may be cheaper to replace your existing router with a wireless one and just use one AEBS in Bridge mode.
Other possible solutions for the G5 end include USB wi-fi dongles, but getting one that will work with your model may be hard work.

Frustrated - Multiple issues with Fios TV/DVR - need advice on dealing with tech support

I have been a Verizon Fios customer since Feb. 20th (all of two and a half weeks). I signed up for my bundle on-line around 11am on the 20th, and had a technician out for install within a few hours on the SAME day. I thought that was impressive - and I was looking forward to having a more reliable and fast internet connection than I had been experiencing with Brighthouse.
The technician who installed was very friendly, and although he had some issues (apparently, there was a Verizon box in this house before us, but someone ripped it off the wall, so they had to run new wire all the way out to the street) the install went pretty quickly and smoothly.
The first few days went along without a problem, and the internet was great. Some of the functionality of the DVR was less than I'd hoped for, but some of the other features were great. I had a glitch trying to set up my online account, but I used the online chat feature to work with tech support and she was able to correct the issue. We noticed a couple times in the evenings that the TV would pixelate - but it only happened a few times and was very brief.
On Sunday the 26th, our real issues started. The live TV started freezing, then having a liquid-like pixelation problem, sometimes no sound. We tried to watch a recorded show from our DVR list and received error messages stating that we didn't have DVR. We called Verizon tech support and a very rude person reset the box several times and apparently even reinitialized the box and the result was that the box wouldn't even turn on anymore. He said that he'd have a new box shipped out to us and that it would arrive by Tuesday or Wednesday. My husband got on the phone at that point and suggested to him that since we were brand new customers (less than a week) and that since we had service installed on the very same day that we ordered it online, that certainly they could have someone bring us a new box on Monday morning. The technician told us that he would transfer us to the billing department because we could probably just cancel the service. We were both dumbfounded. Especially considering that he had been rude from the minute he took our call, and while we were obviously frustrated, we were never rude. We were eventually transferred to someone in billing who said she had never heard of such a thing and that she could not help us unless we wanted to cancel. While this was going on, I had unplugged the box again, let it sit for several minutes, then plugged it back in - and the tv worked. And the DVR worked. We assumed that maybe something the tech support guy did had worked after all. Well, it worked until the next morning. We had error messages saying we had no DVR. A reboot of the box worked again. After work, in the evening, it turned out that scheduled shows didn't record. So, we called tech support again and asked for our new box. We were told we'd have it by Thursday.
New box arrived Thursday and we set it up that evening. Went through trying to get all of our recordings set up again and finally sat down to watch tv. I switched to Showtime (which we are subscribed to in our package) and received an error that the channel was not available, press B to troubleshoot or call tech support with this code. Pressed B, went through the steps and the channel came back. Then, proceeded on to HBO, also part of our subscription - and we received the same error. We pressed B and this time going through the steps did NOT correct - so we called tech support. After working with the girl for over an hour, she finally determined that we needed to be switched to billing to have them remove our HBO package and then put it back on and that should correct the problem. So, while we were waiting for billing to come on the line, we started flipping channels again. Now, channels that had previously worked were now showing the error that the channel was unavailable - even non HD, non premium channels. When the billing girl got on the phone, she said there was really nothing she could do with that being the case and that downgrading our package and re-upgrading it would do nothing - that we needed technical support. She got us on the line with a different tech support person who said that we were obviously having signal related issues and that we needed a tech to come out to look at the wiring. He scheduled an appointment for us for Friday. That call took over 2 hours.
On Friday, the tech came out and spent time checking all of the wires coming in to the house - he said we had multiple splitters on lines that didn't need splitters and that this was likely causing a signal disruption and was probably the cause of the failure on both boxes. He removed some of the splitters and apparently streamlined some of the wiring. We still had the original box and the new box. He hooked up each box and they both worked - all of our premium channels worked, DVR was good, etc. We boxed up the old box to send back, kept the new box and had tv that worked just fine for a few hours... then we started having the channel not available issues again. And, now - we were also getting messages saying that we weren't subscribed to a channel - and this would range from HBO all the way to a non HD standard tv channel. A reboot will work and restore function - for a while. However - scheduled shows aren't recording - or record for 7 seconds and stop. Or record for a while, then have a 20 minute gap in the middle where it's frozen, etc. This has been going on since a few hours after the technician left Friday evening. And, I have to say - when the tech left Friday - everhything seemed fine. He had tested the signal strength - seemed completely thorough and was very nice. I don't think he could have known, at that time, that the problem wasn't fixed.
We have not called back to tech support yet. We're busy with our work and our lives and we're also frustrated. I know it will take another several hours and don't have much faith that there is any resolution. It seems to me that we probably need the whole house completely rewired - brand new - start over. I'm thinking there's a bad wire in there somewhere.
This morning with my coffee before work, I tried to watch a tv show in my DVR list that apparently didn't record properly - no surprise (it froze and skipped over half the show). So, I went to On Demand and found the show. (Without Bay News 9, I'm kind of lost with morning coffee, so I need a show of some kind) It started to play and was going along just fine, till I received a CableCARD (tm) Pairing Information is not available message. I tried the auto fix in the menu, rebooted, etc. It worked for a few minutes, then stopped again. At one point, I got an error saying the set top box lost video due to a network connection failure. Great, does that mean my internet is going bad too?? While looking around in the menu function, I clicked on the self diagnostics feature. It filled in all the information, as I'd seen it do before - except when it got to the package description. This time, instead of Ultimate HD, HBO, VOD, etc., etc (like I'd seen before). it told me that my package is: Arabic, Armenian, ART (Arabic), Extreme HD, HBO, Prime & Ultimate HD, Prime HD, RA, RAI (Italian), etc., etc. Huh??? Really???
So, I'm not sure now what the deal is - would a signal issue cause my subscription package to change? Do I get on the phone with someone at tech support for another few hours? Are they going to send yet another box? Are they going to come re-wire the whole house? Is it worth it? This is really ridiculous. Do I cancel and go back to Brighthouse with my tail between my legs? At least with them, I knew that my internet connection would be wicked slow at certain times of the day, but at least I knew it was coming and could expect it - and I could at least count on my tv and dvr recording my shows.
When I logged into verizon to vent on this forum, my account said that it was unable to access my DVR. When I clicked on manage my DVR, it just says Bad Gateway. Not a great start to our relationship, Verizon.
I really need some advice. Should I stay or should I go? And, if I stay - what is the best way for me to explain this to tech support so they will do the right thing and fix this? And, what is "this" anyway? Bad box, bad wiring?
Any help would be greatly appreciated.

Replied to private message with all information including name, address, phone number and account number. Thank you.

Can't print wirelessly with HP 7410 printer using Airport Extreme

I've got 3 Macs (2 laptops, one desktop) that I was using successfully with my wireless HP 7410 all in one printer using my old Airport Base (snow) Station (822 b & g). Just upgraded for a variety of reasons to the new Airport Extreme Base station and I have NOT been able to get the printer to print wirelessly.
I have tried all available normal methods, including, but not limited to:
1) resetting and restarting the printer and computer
2) installing new printer software, including driver
3) deleting and reinstalling printers using the "print and fax" system preference
4) using the printer on a non-secure network
5) setting up the printer to connect via IPP and LPP
The end result of all of this is that the printer is attached to the network, but the computer (any of the 3) cannot connect to the printer. When I run the HP setup assistant, it cannot "find" the printer.
Everything was working perfectly before I "upgraded." Why am I not able to print with the new base station?
Your help would be greatly appreciated.

I have the same proble trying to print. I have a Mac and 2 PC laptops. I tried to print to three different printers and it will not work. I called Apple support and I was told that it was set up and configured correctly, that it ust be my firewall blocking the printer. I'm at a loss after $179.00 and three hours of trying to get it to work.

Going wireless with a G4 Quicksilver?

I've recently passed down a G4 Quicksilver to someone who plans on using it in a home where hard-wiring an RJ45 would require too much drilling.
Any suggestions on providing him with a suitable wireless card that will work with 10.4.11 and a Linksys WRT54GL wireless router?
Message was edited by: pkocher

Welcome to Apple Discussions!
First off, I hope you followed these steps*:
http://www.macmaps.com/selling.html
Secondly, this article explains, only the original Apple Airport card will work with the QuickSilver:
http://support.apple.com/kb/HT1621
With a bit of googling I found this was the cheapest original Apple Airport card:
http://macunwired.net/MacUnwired/Original_card.html
I have never tried them.

Information on going wireless with my internet please.

I am at present got the usual UK Internet set up of telephone cable modem to computer.
I would like to go wireless. I don't necessary need the latest equipment(cost).
PLUS!!
I have a Powerbook G3 Pismo and would like that to be wireless as well.
Hope you guys can help!
Thanks in advance!

You'll have to get a wireless router. Some phone and cable companies will provide you with this along with instructions and support. But you could also go to the nearest computer or office store and buy an inexpensive ($50-100) wireless router and connect it to your dsl or cable modem. Then you'll need wireless adapters in both of your computers to pick up the signals. It's a great way to go especially for laptops.

Can't get Canon MP620 to work wirelessly with MacBook Pro or AirPort

I bought a Canon MP620 printer at the Apple Store. I specifically asked if it would work wirelessly with my MacBook Pro or AirPort Express since I read comments to the contrary on here. I was assured it would work without a problem and I wouldn't need to upgrade to AirPort Extreme. My Mac is not able to find my printer. Does anyone have any suggestions? I did all of the troubleshooting and nothing works. I have another printer plugged into my AirPort Express so I can't plug this one in (was told at Apple Store that I wouldn't need to).

Hi magcat72,
As BDAqua has mentioned already, you need to configure the wireless network settings first. This is done by connecting the Mac directly to the printer via USB. But before you do this, stick the MP620 CD into your Mac and install the drivers and the Canon IJ Network utility. Once these have been added to the Mac, you can then connect the 620 to the Mac. This should automatically add the printer to your printer list (in Print & Fax). If it doesn't, then you can add the printer manually, by clicking the + and using the Default view.
Once you have the printer queue installed, you can open the queue and click the Utility icon. This will display the MP620 connected via USB. Select it and then click the Network button. This will now guide you through connecting the MP620 to your wireless network.
Once you have completed the network configuration for the printer, you can turn it off and unplug the USB cable from your Mac. You can then move the printer to where you want it to reside and turn it back on again.
Now you need to add the network printer queue, as the previous queue was for direct USB. In fact, to save you selecting the wrong printer, delete the current MP620 from your list by using the - (minus) button.
To add the network printer queue, select to Add a printer and then select More Printers. In the top menu you should see Canon IJ Network. Select this and after a short while the printer should appear with its MAC address (a series of numbers and letters separated by colons) in the lower pane. Select the 620 and click Add.
Now you should be ready to print. If any of the above doesn't work for you then please reply.
PaHu

What else do I need to configure my wireless with AirPort Express?

This is what I have. iMac PowerPC G4 (2.1) without Airport Card, AirPort Express and a couple of laptops with Airport capability. Is there any way to configure wireless for all computers with what I have?

Would that be an AirPort card?
If the clock speed of your iMac G4 is 700 or 800 MHz, it is ONLY compatible with the original 802.11b AirPort card. It is NOT compatible with the AirPort Extreme card.
If the clock speed of your iMac G4 is 1 GHz or&greater, it is ONLY compatible with the AirPort Extreme card. It is NOT compatible with the original AirPort card.
If you need the AirPort Extreme card, it is still made and sold by Apple.
If you need the original AirPort card, Macsolutions.com seems to have some.

I have an i Mac with airport wireless.What steps do I need to take to change name on wireless??

I have an i Mac with airport wireless.What steps do I need to take to change name of wireless(airport)???

You should use Airport Utility, in your Utilities folder (or you can search for it in Spotlight, the magnifying glass in the top right of your screen) to administer the Airport. There, you can change the wireless network settings, including the network name.
Matt

Is Verizon going to acknowlege the problems with FIOS and Windows Vista

For months now, I have been reading the numerous problems Fios internet customers are having with Fios internet/Actiontech Router and Windows Vista and there has been no acknowledgement by Verizon of this current major issue.
I have also experienced the exact same issue for months now since I switched to Verizon FIOS internet. Previously I had Comcast HSI using my Windows Vista laptop. I had their service for over a year and I NEVER has a problem with the Windows Vista globe icon disappearing and loosing internet connection. The Globe always stayed on and never went away and I never lost connection when I had Comcast
I had Verizon FIOS installed last September with my Windows Vista computer and my wireless internet connection started to drop from day 1 and it has been a daily occurrence for over 5 months now. It has gotten so bad, I have had to hardwire my laptop to to be able to use the internet uninterrupted.
This is what daily scenario is:
When I turn on my laptop(with Windows Vista, I can initially get full internet access(with the globe on and it says "Local and internet). After about 10 minutes or less, the globe switches to "local only" and I can still get internet access. After another 5 or so minutes, a large X covers the globe and I lose internet connection entirely. The actiontech router wireless signal is no longer listed as one of the wireless networks. The only way for me to regain internet access is either to restart my laptop or reboot the actiontech router.
Numeorus posts here, over by DSL forums(Broadband Reports),Microsoft's website and a few othere websites detail this issue.
I am extremely shocked and surprised that Verizon has not tried to fix this issue by working with both the makers of the Actiontech Router as well as Microsoft to find out what the problem is and how to fix it.
I would just like to reiterate I strongly believe this is primarily a FIOS internet issue since I previously had Comcast HSI for over a year with the same Windows Vista laptop and I NEVER had that problem. Also, I can connect to my neighbors wireless connection(she uses Comcast HSI) and when I do, the globe stay on all the time on my computer and the internet does not lose connection.
I know that there are a couple of Verizon employees here. Please tell the higher ups who handle FIOS internet that this is a major issue that needs to be resolved as soon as possible.
P.S: Please don't tell me to go by my own router because then, I will have to deal with the issues of setting it up to work with Fios TV and the related VOD, widgets, remote DVR compatability issues to deal with. I don't think I can deal with the additional headaches.

FIOS is short for fiber optics. fiber optics is different technology than DSL.
With that said, if you search the Microsoft databases for vista issues with fiber optics, (CURRENTLY THERE IS ONLY ONE PROVIDER OF FIBER TO THE HOUSE, that being Verizon, so yes you can also search Vista issues with verizon and\or fios) and you will find that Microsoft already acknowledges this issue with their software. AND they offer you a fix.
cjacobs001

Airport Extreme wireless no longer working. Need help!

Until a couple of days ago, I had my brand new Airport Extreme (ver 7.2.1) connected to a cable modem and everything was ok. My Macbook and my Airport Extreme were going wireless fast and easy.
After moving out of town, I’ve changed internet provider and I had to buy a ethernet modem, thus I bought a NETGEAR ADSL2+ modem (model DM111P) and suddenly I lost my wireless connectivity.
The modem looks working just fine. Infact, if I connect my Macbook to the modem NETGEAR DM111P with an ethernet cable, everything is ok.
Also, if I connect my Airport Extreme to the modem NETGEAR DM111P with an ethernet cable, and than I connect the Macbook to the Airport Extreme with another ethernet cable, everything is still fine: I can surf the web without any problems.
But when I try to go “wireless”, my Macbook is not able to find any base. I tried reseting my Airport Extreme to the factory settings and starting over, but It is impossible to “configure” the airport express wireless, because the Macbook doesn’t see it.
I’ve tried also with a wireless pc, but it was not able to find any wireless device.
I tried reseting my modem NETGEAR DM111P and my Airport Extreme to the factory settings and starting over again and I’m still not able to establish a wireless network. I can only access to the internet via ethernet cable. I’ve also turned off encryption. The computer still didn’t see the network. The IP address looks to be valid: 10.0.1.1.
I don’t know what else to do.
Is the Airport Extreme to be considered out of order and should I obtain warranty service or it is just a matter of settings? If so, what kink of settings?

I have been having a similar problem using 802.11g
with the netgear DM111p it's happy with ethernet but apparently has compatibility issues with AEBS
I found a number of reviews from AEBS users who have effectively given up trying to make this work
http://store.apple.com/Apple/WebObjects/ukstore.woa/wo/StoreReentry.wo?productLe arnMore=TK797
I'd say both companies should find a workaround

How to extend wireless with airport express and time capsule

So, I have a time capsule & because of the thick walls in my apartment, I can barely use my ipad and iphone at night in my bedroom! (my macbookPRO stays at 3 bars however!)
I bought an airport express thinking I could plug it closer to or inside my bedroom to boost the signal - but it doesn't seem to work that way - any tips on how to set this up?
TWO ADDITIONAL Qs:
Does connecting directly to my time capsule (which i'm assuming i'd need another ethernet cable) help with the boost? (then negates the other great uses for the airport express it seems)
Isn't there a way to do the boost with the express wirelessly? I'd really love to get wireless speakers, use airplay AND be able to use my devices just two rooms away .... HELP!
thanks so much (when did apple phone support start to be closed on Sundays?)
cheers.

Suggest that you check your setup again to make sure that the settings are correct on both the Time Capsule and AirPort Express.
Open AirPort Utility, select the Time Capsule and click Manual Setup
Click the Wireless tab below the row of icons
Make sure that a check mark is entered next to "Allow this network to be extended".( If the box is not checked, the Time Capsule will not extend to the AirPort Express)
Click Update to save your settings and close AirPort Utility
Next, open AirPort Utility again, select the AirPort Express and click Manual Setup
Click the Wireless tab
Settings should look like this:
Wireless Mode = Extend a wireless network
Wireless Network Name = Same name as the Time Capsule network
Check mark entered next to "Allow wireless clients"
Wireless Security = Same setting as the Time Capsule
Wireless Password = Same password as the Time Capsule network
Confirm Password
Update to save settings and close AirPort Utility
Locate the AirPort Express approximately half way between the Time Capsule and area that needs more wireless coverage. You may need to experiment on placement to find the best compomise.
Post back on your results.

HT4437 i want to play contents from macbook pro to B&W zeppelin air wirelessly,set up is done but can't see airplay button in iTunes,do i need airport express?why?please help.

i want to play contents from macbook pro to B&W zeppelin air wirelessly,set up is done but can't see airplay button in iTunes,do i need airport express?why?please help.

There are at least 3 versions:
http://www.bowers-wilkins.co.uk/Support/Support/iPod_and_Computer_Speakers/Overv iew.html
Original Zeppelin - I've had this for several years.
http://bowersandwilkins.custhelp.com/app/home/p/6,26
Zeppelin Mini.
http://www.bowers-wilkins.co.uk/iPod_and_Computer_Speakers/iPod_and_Computer_Spe akers/Zeppelin_Mini/Overview.html
Zeppelin with Airplay.
http://www.bowers-wilkins.co.uk/iPod_and_Computer_Speakers/iPod_and_Computer_Spe akers/Zeppelin_Air/
(I wouldn't regard the MM-1 as a Zeppelin but not sure if B&W call it that).
I can't do much more to convince you!
You could always update that wiki
AC

If I buy an HP wireless printer, what do I need to do with my Ipad2 to print?

If I buy an HP wireless printer, what do I need to do with my Ipad2 to print?

I'm not sure what your question has to do with networking on the AirPort Express, AirPort Extreme, or Time Capsule....but if you buy an AirPrint compatible printer, it will work with the iPad2.
http://support.apple.com/kb/HT4356
Suggest that you post in the iPad support area for more details
iPad

I have an iMacG5 that I have always had hardwired for internet now want to go wireless. Apple store tells me not possible even though user's guide intsructs how to. Need airport card, base etc.

Need to go wireless with iMacgG5. No airport card installed. Apple employee tells me not possible to go wireless with this machine even though user's guide instructs how to. ?????

The early iMac G5s had optional wireless via an Airport Extreme card. Later ones came with it preinstalled. If System Profiler (in Applications > Utilities) shows your Machine ID as "PowerMac8,1" it would have been optional, any number 8,2 and up means you should have built in wireless.
The simplest wasy to access wireless today is via a wireless USB adapter. However, you can't simply run to the store and buy any old gadget. Most on store shelves lack the required Mac OX software support files. This one:
Newer Technology MAXPower 802.11n/g/b USB Adapter + Plug and play direct or with extension cradle
plugs into a USB port and comes with the proper Mac drivers. It's also faster than the Airport Extreme, which is limited to "g" speeds. It's also much cheaper that original Apple cards, which are getting harder to find. I like the cradle that allows placing the device for best reception.

Going wireless with FiOS--do I need Airport?

Similar Messages

Maybe you are looking for