GoldenGate extract issue - TCP/IP error 113 (No route to host)
Hi All,
I have created a new replicat process on a new server. The old server is to be de-commissioned. after I created the replicat process on the new server (I copied the replicat prm file from the existing server - which is to be de-commissioned to new server and changed old encrypted password with new one and DISCARDFILE location), I modified the extract parameter file on source server. I changed RMTHOST and RMTTRAIL from older server name to new server name and old location to new location. once done , I stopped the extract and ran below command:
ADD RMTTRAIL /u01/app/ggs/dirdat/db, EXTRACT Ext1
and then started the extract process after which I am getting this error:
*2012-03-16 02:24:39 GGS ERROR 150 TCP/IP error 113 (No route to host).*
*2012-03-16 02:24:39 GGS ERROR 190 PROCESS ABENDING.*
I can very well ping both servers from both source and target. Any thoughts?
-Onkar
got the answer. It was firewall issue. When i turned the firewall down "service iptables stop", everything was smooth. I have raised request with the proper team to add the source ip in the target system firewall.
-Onkar
Similar Messages
-
Linux Error: 113: No route to host
After completeing 3.1 in the installation guide I jump down to chapter 4, but I can't get the web interface to work.
It doesn't matter how I access the URL, I've tried both http://localhost:8080/htmldb and http://realhostname:8080/htmldb/ with same result, no data at all, the connection is closed directly.
I've checked listener.log and found this:
02-NOV-2005 01:01:02 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=10.8.0.22)(PORT=2556)) * handoff * http * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12571: TNS:packet writer failure
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
Linux Error: 113: No route to host
02-NOV-2005 01:01:23 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=33183)) * handoff * http * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12571: TNS:packet writer failure
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
Linux Error: 113: No route to host
02-NOV-2005 01:02:54 * service_update * XE * 0
02-NOV-2005 01:03:01 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=X.Y.Z.W)(PORT=33509)) * handoff * http * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12571: TNS:packet writer failure
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
Linux Error: 113: No route to hostProblem located (as usual after the 3 hours it took me to find the forum and post about it).
Using netstat and lsof I found that XE not only binds to 1521 and 8080, but also to port 33172 and since iptables blocks everything it got "No route to host".
The question is if 33172 is static or just a randomly chosen port number. -
UDPWritePacket error 65 No route to host for -64.168.0.104
Hi,
When ARD 3 is active I see a continuous stream of the above message in Console.
The IP belongs to VeriSign. Does anyone know what ARD is doing with VeriSign?
I hope this isn't a snoop.I am seeing this as well, but it is for numerous addresses. The -64 appears to be an artifact somehow appearing instead of 192 (as in 192.168). So I would guess that the computer you're seeing issues with is 192.168.0.104.
On mine, I'm seeing it with lots of computers, which is why I know the above. They all start with "-64.168.1." which, if the -64 were a 192, would be my subnet scheme.
I just did a count, and in the past 10 minutes, I has 30 entries in my log... from six distinct IPs. I just went to look up what computers were at those IPs, and... they don't appear in my ARD scanner. So, I looked them up in my All Computers list, and it turns out that they are all laptops which are in "All Computers" but which are currently not on my LAN.
So I would hazard a guess that this is an innocuous log entry that is informing you that ARD is attempting to see if various computers in your list have shown up on the LAN since last time it looked for them.
To validate... is 192.168.0.104 on your LAN a laptop or otherwise unconnected machine?
Mac OS X (10.4.6) -
when extract process starts then it has got error that is " Could not find archived log 444.arc" when ı look for that log(444),last log file is 443.arc so 444.arc is not be formed...
have anybody got a idea why that extract process want not be formed archive log....
Edited by: user9059707 on 28-Apr-2010 15:19Thanks for your respone steven !!!
Yes, i run the extract process in GGSCI command line enviroment.
i am trying to run this process on single machine.
while i am trying on two different machine it display TCP/IP error 10060 ( A connection attempt failed becuase the connected party didnot propelry respond after a period of time, or establish connection failed becuase connected host has failed to respond).
please help Steve!!!
Regards,
Abhishek -
TCP/IP error 111 (connection refused)
I encountered TCP/IP error 111 (connection refused) in my source DB. I ran view ggsevt.
Source
2013-09-06 17:47:41 INFO OGG-00987 Oracle GoldenGate Command Interpreter for Oracle: GGSCI c
ommand (oracle): edit params mgr.
2013-09-06 17:48:00 INFO OGG-00987 Oracle GoldenGate Command Interpreter for Oracle: GGSCI c
ommand (oracle): stop extract ext1.
2013-09-06 17:48:05 WARNING OGG-01223 Oracle GoldenGate Capture for Oracle, ext1.prm: TCP/IP er
ror 111 (Connection refused).
Target
2013-09-06 17:49:38 INFO OGG-01677 Oracle GoldenGate Collector for Oracle: Waiting fo
r connection (started dynamically).
2013-09-06 17:49:54 ERROR OGG-01224 Oracle GoldenGate Collector for Oracle: opening po
rt to MGR from SERVER failed with 2:Could not establish host TCP/IP address.
2013-09-06 17:49:54 ERROR OGG-01668 Oracle GoldenGate Collector for Oracle: PROCESS AB
ENDING.
Firewall is cleared, I can telnet from source to target with port 7809. Not an issue. Checked in another post where a user encountered error in /etc/hosts. My settings are perfect right.
[oracle@db1 dirdat]$ telnet db4 7809
Trying 192.168.56.101...
Connected to db4.localdomain (192.168.56.101).
Escape character is '^]'.
Connection closed by foreign host.
Source:
> edit params mgr
DYNAMICPORTLIST 7000-9000
PORT 7809
Any help is much appreciated.HI I have the same problem
PLZ tell me the solution!
$ telnet 10.80.16.214 7809
Trying 10.80.16.214...
Connected to 10.80.16.214.
Escape character is '^]'.
Connection to 192.168.0.178 closed by foreign host.
2013-09-13 10:21:42 WARNING OGG-01223 Oracle GoldenGate Capture for Oracle, pum_2.prm: TCP/IP error 111 (Connection refused).
2013-09-13 10:21:54 WARNING OGG-01223 Oracle GoldenGate Capture for Oracle, pum_2.prm: TCP/IP error 111 (Connection refused).
2013-09-13 10:22:05 WARNING OGG-01223 Oracle GoldenGate Capture for Oracle, pum_2.prm: TCP/IP error 111 (Connection refused).
2013-09-13 10:22:16 WARNING OGG-01223 Oracle GoldenGate Capture for Oracle, pum_2.prm: TCP/IP error 111 (Connection refused).
2013-09-13 10:22:27 WARNING OGG-01223 Oracle GoldenGate Capture for Oracle, pum_2.prm: TCP/IP error 111 (Connection refused).
2013-09-13 10:22:38 WARNING OGG-01223 Oracle GoldenGate Capture for Oracle, pum_2.prm: TCP/IP error 111 (Connection refused).
2013-09-13 10:22:49 WARNING OGG-01223 Oracle GoldenGate Capture for Oracle, pum_2.prm: TCP/IP error 111 (Connection refused).
2013-09-13 10:23:00 WARNING OGG-01223 Oracle GoldenGate Capture for Oracle, pum_2.prm: TCP/IP error 111 (Connection refused).
2013-09-13 10:23:11 WARNING OGG-01223 Oracle GoldenGate Capture for Oracle, pum_2.prm: TCP/IP error 111 (Connection refused).
2013-09-13 10:23:22 ERROR OGG-01224 Oracle GoldenGate Capture for Oracle, pum_2.prm: TCP/IP error 111 (Connection refused); retries exceeded.
2013-09-13 10:23:22 ERROR OGG-01668 Oracle GoldenGate Capture for Oracle, pum_2.prm: PROCESS ABENDING. -
Hi,
I've configured ogg between primary & DR server. I'm continuously getting the following error in my primary server for DP process & sometimes for EXTRACT process after which process goes in abended state.
WARNING OGG-01223 TCP/IP error 111 (Connection refused).
After starting the process manually, it comes in Running state. But this is frequent issue I'm facing for OGG configuration at my end.
Please find the parameter details & report log details as follows:
Primary Server Parameters:
GGSCI (sevadm) 40> view params dpatm
extract dpatm
userid ggs_owner,password ggs_owner
discardfile /home/oracle/ogg/dirdat/discard/dpatm_discard.txt,append,megabytes 1
0
rmthost 10.10.250.198 ,mgrport 7809,tcpbufsize 100000
rmttrail /home/oracle/ogg/dirdat/rt
passthru
sequence atmswitch.*;
table atmswitch.*;
GGSCI (sevadm) 51> view params mgr
port 7809
dynamicportlist 7810-7830,7833,7835
DYNAMICPORTREASSIGNDELAY 5
--autorestart extract extatm,retries 500,waitminutes 1,resetminutes 600
--autorestart extract extcbs,retries 500,waitminutes 1,resetminutes 600
--autorestart extract dpatm,retries 500,waitminutes 1,resetminutes 600
--autorestart extract dpcbs,retries 500,waitminutes 1,resetminutes 600
--autorestart replicat drrepatm,retries 500,waitminutes 1,resetminutes 600
--autorestart replicat drrepcbs,retries 500,waitminutes 1,resetminutes 600
--autorestart extract extaml,retries 500,waitminutes 1,resetminutes 600
--autorestart extract extrm,retries 500,waitminutes 1,resetminutes 600
--autorestart extract extinb,retries 500,waitminutes 1,resetminutes 600
--autorestart extract dpaml,retries 500,waitminutes 1,resetminutes 600
--autorestart extract dprm,retries 500,waitminutes 1,resetminutes 600
--autorestart extract dpinb,retries 500,waitminutes 1,resetminutes 600
--autorestart replicat drrepaml,retries 500,waitminutes 1,resetminutes 600
--autorestart replicat drreprm,retries 500,waitminutes 1,resetminutes 600
--autorestart replicat drrepinb,retries 500,waitminutes 1,resetminutes 600
userid ggs_owner,password ggs_owner
purgeoldextracts /home/oracle/ogg/dirdat/*,usecheckpoints,minkeepdays 5
GGSCI (sevadm) 52> view params extatm
extract extatm
userid ggs_owner,password ggs_owner
reportcount every 2 hours,rate
report at 01:00
reportrollover at 01:15
tranlogoptions asmuser sys@asm,asmpassword asmdba
grouptransops 2000
discardfile /home/oracle/ogg/dirdat/discard/extatm_discard.txt,append,megabytes
10
discardrollover at 02:00 on sunday
exttrail /home/oracle/ogg/dirdat/lt
ddl include all
ddloptions addtrandata retryop retrydelay 20 maxretries 20,report
sequence atmswitch.*;
table atmswitch.*;
Report log file for DP Process:
GGSCI (sevadm) 39> view report dpatm
Oracle GoldenGate Capture for Oracle
Version 11.2.1.0.1 OGGCORE_11.2.1.0.1_PLATFORMS_120423.0230_FBO
Linux, x64, 64bit (optimized), Oracle 10g on Apr 23 2012 07:44:10
Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
Starting at 2015-03-19 16:54:56
Operating System Version:
Linux
Version #1 SMP Tue Mar 16 21:52:39 EDT 2010, Release 2.6.18-194.el5
Node: sevadm
Machine: x86_64
soft limit hard limit
Address Space Size : unlimited unlimited
Heap Size : unlimited unlimited
File Size : unlimited unlimited
CPU Time : unlimited unlimited
Process id: 13260
Description:
** Running with the following parameters **
2015-03-19 16:54:56 INFO OGG-03035 Operating system character set identifie
d as UTF-8. Locale: en_US, LC_ALL:.
extract dpatm
userid ggs_owner,password *********
2015-03-19 16:54:56 INFO OGG-03500 WARNING: NLS_LANG environment variable d
oes not match database character set, or not set. Using database character set v
alue of WE8ISO8859P1.
discardfile /home/oracle/ogg/dirdat/discard/dpatm_discard.txt,append,megabytes 1
0
rmthost 10.10.250.198 ,mgrport 7809,tcpbufsize 100000
rmttrail /home/oracle/ogg/dirdat/rt
passthru
sequence atmswitch.*;
table atmswitch.*;
2015-03-19 16:54:56 INFO OGG-01815 Virtual Memory Facilities for: COM
anon alloc: mmap(MAP_ANON) anon free: munmap
file alloc: mmap(MAP_SHARED) file free: munmap
target directories:
/home/oracle/ogg/dirtmp.
CACHEMGR virtual memory values (may have been adjusted)
CACHESIZE: 64G
CACHEPAGEOUTSIZE (normal): 8M
PROCESS VM AVAIL FROM OS (min): 128G
CACHESIZEMAX (strict force to disk): 96G
Database Version:
Oracle Database 10g Release 10.2.0.1.0 - 64bit Production
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Database Language and Character Set:
NLS_LANG = ".WE8ISO8859P1"
NLS_LANGUAGE = "AMERICAN"
NLS_TERRITORY = "AMERICA"
NLS_CHARACTERSET = "WE8ISO8859P1"
2015-03-19 16:55:26 WARNING OGG-01223 TCP/IP error 111 (Connection refused).
2015-03-19 16:56:08 WARNING OGG-01223 TCP/IP error 111 (Connection refused).
2015-03-19 16:56:49 WARNING OGG-01223 TCP/IP error 111 (Connection refused).
2015-03-19 16:57:30 WARNING OGG-01223 TCP/IP error 111 (Connection refused).
2015-03-19 16:58:11 WARNING OGG-01223 TCP/IP error 111 (Connection refused).
2015-03-19 16:58:52 WARNING OGG-01223 TCP/IP error 111 (Connection refused).
2015-03-19 16:59:33 WARNING OGG-01223 TCP/IP error 111 (Connection refused).
2015-03-19 17:00:14 WARNING OGG-01223 TCP/IP error 111 (Connection refused).
2015-03-19 17:00:55 WARNING OGG-01223 TCP/IP error 111 (Connection refused).
2015-03-19 17:01:36 WARNING OGG-01223 TCP/IP error 111 (Connection refused).
2015-03-19 17:02:17 WARNING OGG-01223 TCP/IP error 111 (Connection refused).
Source Context :
SourceModule : [er.extrout]
SourceID : [/scratch/aime1/adestore/views/aime1_adc4150256/oggc
ore/OpenSys/src/app/er/extrout.c]
SourceFunction : [tcp_send_data]
SourceLine : [1352]
ThreadBacktrace : [9] elements
: [/home/oracle/ogg/libgglog.so(CMessageContext::AddTh
readContext()+0x1e) [0x2ba1dd1587de]]
: [/home/oracle/ogg/libgglog.so(CMessageFactory::Creat
eMessage(CSourceContext*, unsigned int, ...)+0x2cc) [0x2ba1dd154c7c]]
: [/home/oracle/ogg/libgglog.so(_MSG_ERR_TCP_GENERIC(C
SourceContext*, char const*, CMessageFactory::MessageDisposition)+0x31) [0x2ba1d
d139daf]]
: [/home/oracle/ogg/extract(tcp_send_data(extract_def*
)+0x2b3) [0x5116e1]]
: [/home/oracle/ogg/extract(flush_tcp(extract_def*, in
t)+0x15c) [0x512350]]
: [/home/oracle/ogg/extract(RECOVERY_initialize()+0x37
1) [0x5239a1]]
: [/home/oracle/ogg/extract(main+0x4a5) [0x56b335]]
: [/lib64/libc.so.6(__libc_start_main+0xf4) [0x333621d
994]]
: [/home/oracle/ogg/extract(__gxx_personality_v0+0x382
) [0x4e754a]]
2015-03-19 17:02:58 ERROR OGG-01224 TCP/IP error 111 (Connection refused); r
etries exceeded.
2015-03-19 17:02:58 ERROR OGG-01668 PROCESS ABENDING.
Please guide me on this.
Regards,
Simon P- check your remote host server is up and running.
- check mgr process is up and running on target site.
- try this and see if network connection is OK..
telnet 10.10.250.198 7809
- try to copy a file (scp) from source to target (take a dummy file; size bigger than tcpbufsize)
- check ggserr.log file on target; you might see if there are any issues with server/collector port allocation/timeout.
hope this helps...
Thanks. -
Increase UDP sending size over 64k bytes and get error -113,sending buffer not enough
Dear all,
I have a case that I must send a data over 64k bytes in a socket with UDP . I got a error-113 shows "A message sent on a datagram socket was larger than the internal message buffer or some other network limit, or the buffer used to receive a datagram was smaller than the datagram itself.".I searched for this issue and got the closest answer as below:
http://digital.ni.com/public.nsf/allkb/D5AC7E8AE545322D8625730100604F2D?OpenDocument
It said I have to change buffer size with Wsock.dll. I used the same mathod to increaes the send buffer to 131072 bytes by choice optionname to so_sndbuf (x1001) and give it value with 131072 and it worked fine without error. However I still got an error 113 while sending data with " UDP Write.vi ". It seems UDP write.vi reset the buffer size? Are there any other things cause the error?
I attached example code. In UDP Sender.vi you can see I change send buffer size to 131072 and send date included a 65536 bytes data.There is also a UDP receiver.vi and there is some missing VI which you can get from the LINK. But it's not necessary.
Attachments:
UDP Sender.vi 14 KB
UDP Receiver.vi 16 KB
UDP_set_send_buffer.vi 16 KBThe header for a UDP packet includes a 16 bit field that defines the size of the UDP message (HEADER AND DATA)
16 bits limits you to a total size of 65635 bytes, minus the header sizes; a minimum of 20 bytes are required to define an IP packet and 8 bytes for UDP leaving an effective data payload of 65507
bytes.
LabVIEW is not the issue...
http://en.wikipedia.org/wiki/User_Datagram_Protocol#Packet_structure
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness -
Hi guys
i have problem when i run my windows application exe in windows server 2003
it give me this exception error :
I using sql server 2005
visual studio 2008
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.Data.SqlClient.SqlException: A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error)
at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParserStateObject.ReadNetworkPacket()
at System.Data.SqlClient.TdsParserStateObject.ReadBuffer()
at System.Data.SqlClient.TdsParserStateObject.ReadByte()
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlDataReader.ConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
at System.Data.SqlClient.SqlCommand.ExecuteDbDataReader(CommandBehavior behavior)
at System.Data.Common.DbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet)
at Sales.SalesClass.ShowSalesData(String ConnectionString)
at Sales.Form1.timer1_Tick(Object sender, EventArgs e)
at System.Windows.Forms.Timer.OnTick(EventArgs e)
at System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
Sales
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Documents%20and%20Settings/administrator.ALTAWIREADYMIX.000/Desktop/Sales.exe
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
System.Data
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
System.Transactions
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Transactions/2.0.0.0__b77a5c561934e089/System.Transactions.dll
System.EnterpriseServices
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.EnterpriseServices/2.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
Why this error show and how to solve it
if possible help me
Why this exception show and how to solve it.
Notes this exception not close my application and not affect in result show but i don't know why it showThe problem can be caused by certain issues of long-running queries, which are reported improperly. Try increasing the timeout:
http://support.microsoft.com/en-us/kb/555938 -
I am getting TCP Denied error even after bypassing the URL d4bacpiwuo4wu.cloudfront.net & cloudfront.net under Web Security Manager -- > Bypass Settings à Sources/Destinations to Bypass Proxy. This is from one of the mobile application through which we are getting below issue.
Please find the logs below.
1413779230.845 0 10.238.162.108 TCP_DENIED/307 0 GET http://d4bacpiwuo4wu.cloudfront.net/json/categories/20141018175221?Expires=1413779616&Signature=AM2Q79AjvFARlSBbwWhCP6Y~2RB1L-GDYKPbMGs2u-9Oo9wtSoFRewGv~6FLI2dcZ5YaEwJygJQf3MhSZLdljlBxoXPrLrLyG0OKidmBCGrpMhtIaK-zKxLPbgIRqYNAB37ns6z1CPk~IUcPGjolzyL5gLjoZETxo54jkieH5kbr57ufXmtiRiacc2sOx~6ioYbiwZ6Fdld7TxayiyW5vLgUDsfTMAgNH3g8s5ci4VAtS2g4fey6yLy3RQ4rv0AMqBhCbHoURTpWyd-XH6FVqyvWcLR1SgSKPCS~fQiWT-TFYTeILqWYEQdAJLg6H8MP8GM9-p-GowCqpojyE6d3og__&Key-Pair-Id=APKAI3RTHSIRCRLBNBUQ - NONE/- - OTHER-NONE-Test-NONE-NONE-NONE-NONE <-,-,-,"-",-,-,-,-,"-",-,-,-,"-",-,-,"-","-",-,-,-,-,"-","-","-","-","-","-",0.00,0,-,"-","-"> - "MyMaxis/0 CFNetwork/711.0.6 Darwin/14.0.0" - - Range: - Content-Range: -
1413779230.848 0 10.238.162.108 TCP_DENIED/307 0 GET http://d4bacpiwuo4wu.cloudfront.net/json/rewardoffers/20141018175221?Expires=1413779617&Signature=BSj2JRPGeyhmtglYHZ2YZW6nX8UZ1SlBh3k~Qei6IdXzh2-oq1eYwqqO3LXRRbSdGAnF2R9zGO5zD9t8AdoEBhpUkQC5tTJKpB10QE~Sgjx0GnS4biAMLhRGoni-ib8XFsDQ5QVrTmP9yKCn4GGdaJApNN07p1F7iZK57xvdgcU73Bh67g~Taj8lYdhRhRLNQzAiPDqg-RwbSg2CnFtrj3DSWvWzhTK1BEdXk5FlP5x1W5B33q0XpmaPGSHmYbN~kXfCbJyuXaIRoamtWsWhySw9ghsA57oCaQLpDXX-BW~k2SPYUcyLJ~6TJ-F5aeJodKi06VoAIfQl4FKq1lWBcQ__&Key-Pair-Id=APKAI3RTHSIRCRLBNBUQ - NONE/- - OTHER-NONE-Test-NONE-NONE-NONE-NONE <-,-,-,"-",-,-,-,-,"-",-,-,-,"-",-,-,"-","-",-,-,-,-,"-","-","-","-","-","-",0.00,0,-,"-","-"> - "MyMaxis/0 CFNetwork/711.0.6 Darwin/14.0.0" - - Range: - Content-Range: -
1413779230.850 0 10.238.162.108 TCP_DENIED/307 0 GET http://d4bacpiwuo4wu.cloudfront.net/json/rewardads/20141018175221?Expires=1413779618&Signature=M58~4c3CI~gOJM8-OE7AZw0wkyi10cjpyqXq8WeX6iW6ox81vFn6vmaMxU5BQJrM-vsyl3C7kX4zcprfNztCdUtb5jzyF9LBG8J0iXIkvKQYPFeI5tdRYsE6tce95cL8ALvXJYxSd~8uVqEjTMOdVHUikvUGmUDpzCysaVsVkev3gKmi~rx4EpMdpXOlU1J5D5eAQ-6M9XIr-kxc3NJDjDJSRkvbk4iwWCo2-LB32TPWBB~vEjHtSfRWMEKyJUBL2NHOpkKhCpLIVrcFrrGOSTVPwTF8fC~1PWPnqImudQTZ~e-80i2xCwdJVJNCe0S4DTgI0JxBTCdXhAdIUUtlow__&Key-Pair-Id=APKAI3RTHSIRCRLBNBUQ - NONE/- - OTHER-NONE-Test-NONE-NONE-NONE-NONE <-,-,-,"-",-,-,-,-,"-",-,-,-,"-",-,-,"-","-",-,-,-,-,"-","-","-","-","-","-",0.00,0,-,"-","-"> - "MyMaxis/0 CFNetwork/711.0.6 Darwin/14.0.0" - - Range: - Content-Range: -
1413779230.868 0 10.238.162.108 TCP_DENIED/401 0 GET http://ironcache.men.maxis.com.my/B0000D0000N0001F0000S0000R0004/http://d4bacpiwuo4wu.cloudfront.net/json/categories/20141018175221?Expires=1413779616&Signature=AM2Q79AjvFARlSBbwWhCP6Y~2RB1L-GDYKPbMGs2u-9Oo9wtSoFRewGv~6FLI2dcZ5YaEwJygJQf3MhSZLdljlBxoXPrLrLyG0OKidmBCGrpMhtIaK-zKxLPbgIRqYNAB37ns6z1CPk~IUcPGjolzyL5gLjoZETxo54jkieH5kbr57ufXmtiRiacc2sOx~6ioYbiwZ6Fdld7TxayiyW5vLgUDsfTMAgNH3g8s5ci4VAtS2g4fey6yLy3RQ4rv0AMqBhCbHoURTpWyd-XH6FVqyvWcLR1SgSKPCS~fQiWT-TFYTeILqWYEQdAJLg6H8MP8GM9-p-GowCqpojyE6d3og__&Key-Pair-Id=APKAI3RTHSIRCRLBNBUQ - NONE/- - OTHER-NONE-NONE-NONE-NONE-NONE-NONE <-,-,-,"-",-,-,-,-,"-",-,-,-,"-",-,-,"-","-",-,-,-,-,"-","-","-","-","-","-",0.00,0,-,"-","-"> - "MyMaxis/0 CFNetwork/711.0.6 Darwin/14.0.0" - - Range: - Content-Range: -
1413779230.885 0 10.238.162.108 TCP_DENIED/401 0 GET http://ironcache.men.maxis.com.my/B0000D0000N0001F0000S0000R0004/http://d4bacpiwuo4wu.cloudfront.net/json/categories/20141018175221?Expires=1413779616&Signature=AM2Q79AjvFARlSBbwWhCP6Y~2RB1L-GDYKPbMGs2u-9Oo9wtSoFRewGv~6FLI2dcZ5YaEwJygJQf3MhSZLdljlBxoXPrLrLyG0OKidmBCGrpMhtIaK-zKxLPbgIRqYNAB37ns6z1CPk~IUcPGjolzyL5gLjoZETxo54jkieH5kbr57ufXmtiRiacc2sOx~6ioYbiwZ6Fdld7TxayiyW5vLgUDsfTMAgNH3g8s5ci4VAtS2g4fey6yLy3RQ4rv0AMqBhCbHoURTpWyd-XH6FVqyvWcLR1SgSKPCS~fQiWT-TFYTeILqWYEQdAJLg6H8MP8GM9-p-GowCqpojyE6d3og__&Key-Pair-Id=APKAI3RTHSIRCRLBNBUQ - NONE/- - OTHER-NONE-NONE-NONE-NONE-NONE-NONE <-,-,-,"-",-,-,-,-,"-",-,-,-,"-",-,-,"-","-",-,-,-,-,"-","-","-","-","-","-",0.00,0,-,"-","-"> - "MyMaxis/0 CFNetwork/711.0.6 Darwin/14.0.0" - - Range: - Content-Range: -
1413779230.915 0 10.238.162.108 TCP_DENIED/401 0 GET http://ironcache.men.maxis.com.my/B0000D0000N0001F0000S0000R0004/http://d4bacpiwuo4wu.cloudfront.net/json/rewardads/20141018175221?Expires=1413779618&Signature=M58~4c3CI~gOJM8-OE7AZw0wkyi10cjpyqXq8WeX6iW6ox81vFn6vmaMxU5BQJrM-vsyl3C7kX4zcprfNztCdUtb5jzyF9LBG8J0iXIkvKQYPFeI5tdRYsE6tce95cL8ALvXJYxSd~8uVqEjTMOdVHUikvUGmUDpzCysaVsVkev3gKmi~rx4EpMdpXOlU1J5D5eAQ-6M9XIr-kxc3NJDjDJSRkvbk4iwWCo2-LB32TPWBB~vEjHtSfRWMEKyJUBL2NHOpkKhCpLIVrcFrrGOSTVPwTF8fC~1PWPnqImudQTZ~e-80i2xCwdJVJNCe0S4DTgI0JxBTCdXhAdIUUtlow__&Key-Pair-Id=APKAI3RTHSIRCRLBNBUQ - NONE/- - OTHER-NONE-NONE-NONE-NONE-NONE-NONE <-,-,-,"-",-,-,-,-,"-",-,-,-,"-",-,-,"-","-",-,-,-,-,"-","-","-","-","-","-",0.00,0,-,"-","-"> - "MyMaxis/0 CFNetwork/711.0.6 Darwin/14.0.0" - - Range: - Content-Range: -
1413779230.920 0 10.238.162.108 TCP_DENIED/401 0 GET http://ironcache.men.maxis.com.my/B0000D0000N0001F0000S0000R0004/http://d4bacpiwuo4wu.cloudfront.net/json/rewardoffers/20141018175221?Expires=1413779617&Signature=BSj2JRPGeyhmtglYHZ2YZW6nX8UZ1SlBh3k~Qei6IdXzh2-oq1eYwqqO3LXRRbSdGAnF2R9zGO5zD9t8AdoEBhpUkQC5tTJKpB10QE~Sgjx0GnS4biAMLhRGoni-ib8XFsDQ5QVrTmP9yKCn4GGdaJApNN07p1F7iZK57xvdgcU73Bh67g~Taj8lYdhRhRLNQzAiPDqg-RwbSg2CnFtrj3DSWvWzhTK1BEdXk5FlP5x1W5B33q0XpmaPGSHmYbN~kXfCbJyuXaIRoamtWsWhySw9ghsA57oCaQLpDXX-BW~k2SPYUcyLJ~6TJ-F5aeJodKi06VoAIfQl4FKq1lWBcQ__&Key-Pair-Id=APKAI3RTHSIRCRLBNBUQ - NONE/- - OTHER-NONE-NONE-NONE-NONE-NONE-NONE <-,-,-,"-",-,-,-,-,"-",-,-,-,"-",-,-,"-","-",-,-,-,-,"-","-","-","-","-","-",0.00,0,-,"-","-"> - "MyMaxis/0 CFNetwork/711.0.6 Darwin/14.0.0" - - Range: - Content-Range: -
1413779231.012 0 10.238.162.108 TCP_DENIED/401 0 GET http://ironcache.men.maxis.com.my/B0000D0000N0001F0000S0000R0004/http://d4bacpiwuo4wu.cloudfront.net/json/rewardads/20141018175221?Expires=1413779618&Signature=M58~4c3CI~gOJM8-OE7AZw0wkyi10cjpyqXq8WeX6iW6ox81vFn6vmaMxU5BQJrM-vsyl3C7kX4zcprfNztCdUtb5jzyF9LBG8J0iXIkvKQYPFeI5tdRYsE6tce95cL8ALvXJYxSd~8uVqEjTMOdVHUikvUGmUDpzCysaVsVkev3gKmi~rx4EpMdpXOlU1J5D5eAQ-6M9XIr-kxc3NJDjDJSRkvbk4iwWCo2-LB32TPWBB~vEjHtSfRWMEKyJUBL2NHOpkKhCpLIVrcFrrGOSTVPwTF8fC~1PWPnqImudQTZ~e-80i2xCwdJVJNCe0S4DTgI0JxBTCdXhAdIUUtlow__&Key-Pair-Id=APKAI3RTHSIRCRLBNBUQ - NONE/- - OTHER-NONE-NONE-NONE-NONE-NONE-NONE <-,-,-,"-",-,-,-,-,"-",-,-,-,"-",-,-,"-","-",-,-,-,-,"-","-","-","-","-","-",0.00,0,-,"-","-"> - "MyMaxis/0 CFNetwork/711.0.6 Darwin/14.0.0" - - Range: - Content-Range: -
1413779231.013 0 10.238.162.108 TCP_DENIED/401 0 GET http://ironcache.men.maxis.com.my/B0000D0000N0001F0000S0000R0004/http://d4bacpiwuo4wu.cloudfront.net/json/rewardoffers/20141018175221?Expires=1413779617&Signature=BSj2JRPGeyhmtglYHZ2YZW6nX8UZ1SlBh3k~Qei6IdXzh2-oq1eYwqqO3LXRRbSdGAnF2R9zGO5zD9t8AdoEBhpUkQC5tTJKpB10QE~Sgjx0GnS4biAMLhRGoni-ib8XFsDQ5QVrTmP9yKCn4GGdaJApNN07p1F7iZK57xvdgcU73Bh67g~Taj8lYdhRhRLNQzAiPDqg-RwbSg2CnFtrj3DSWvWzhTK1BEdXk5FlP5x1W5B33q0XpmaPGSHmYbN~kXfCbJyuXaIRoamtWsWhySw9ghsA57oCaQLpDXX-BW~k2SPYUcyLJ~6TJ-F5aeJodKi06VoAIfQl4FKq1lWBcQ__&Key-Pair-Id=APKAI3RTHSIRCRLBNBUQ - NONE/- - OTHER-NONE-NONE-NONE-NONE-NONE-NONE <-,-,-,"-",-,-,-,-,"-",-,-,-,"-",-,-,"-","-",-,-,-,-,"-","-","-","-","-","-",0.00,0,-,"-","-"> - "MyMaxis/0 CFNetwork/711.0.6 Darwin/14.0.0" - - Range: - Content-Range: -Ensure that all participants in the cluster must have an identical cluster configuration, except for the device priority within the cluster.
The following URL may help you:
http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/vpnsysop.html#wp1048834 -
hi all,
i want to connect to server side from client , i am using sql server 2008 sp1 and os winn 7 64 bit, but it give me an error as above.
also i tried this link:
http://social.msdn.microsoft.com/Forums/sqlserver/es-ES/c0481462-fedf-4f3b-b984-ae3fef64a3b1/provider-tcp-provider-error-0-no-connection-could-be-made-because-the-target-machine-actively?forum=sqldatabaseengine
and i configured two things as follow:
windows firewall --> port --> spacial local (1433) --> allow the connection -->public (checked) and sql server network configuration manager -->protocols for mssqlserver TCP/IP(enabled).
note: my client and server windows firewalls is disabled.
but i can not solve this issue.
pls help me.
thanks & best regards.
pls help mehi Sathish,
thank you,
this is my connection string>>
"Data Source=192.168.1.106.1433;Network Library=DBMSSOCN;" +
"Initial Catalog=rasol;Integrated Security=sspi;"
And I tried into command prompt, it replied for 192.168.1.106.
best regards. -
I am currently using Labview 8.20
I am reading a text file and sending the contents of that file using UDP. The file is big and I get the
Error 113. " A message sent on a datagram was larger than the internal buffer or some other network limit,
or the buffer used to receive a datagram was small that the datagram itself". If I use a small file, it works.
I am fairly new to Labview and I just modified the code in the Examples for the UDP Sender and
I am using the UDP Receiver example.
I am using the Read From Text File VI and connected it's output text to the UDP data in.
Any ideas?
JaimeHi Jaime,
First of all, are you positive this is LabVIEW 8.20? I have noticed a similar issue that was resolved in LabVIEW 8.0... Are these two PCs both on the same OS and both with LabVIEW 8.20?
Assuming so, how large of a file are you transmitting using UDP? Have you seen what the threshold might be for causing this error? Also, try increasing the max bytes/read and see if that helps.
Sam
-Sam F, DAQ Marketing Manager
Learn about measuring temperature
Learn how to take voltage measurements
Learn how to measure current -
GoldenGate extract from DB2 in rollforward pending mode
Hi,
Could anyone tell me whether it would be possible to use GoldenGate extract to extract transactions from a DB2 database in "rollforward pending mode"?
Thanks!(answering this just to learn something about DB2)
"By default, if archive logging was enabled for a database, when you issue the restore command, the database is left in a rollforward pending state. The database or tablespace in a rollforward pending state cannot be used until it is brought out of this state by applying the rollforward command."
I would say no. -
my iphone 4 will not turn on but when connected to the pc in itunes it says my device is in recovery mode and when i do SHIFT restore and select my ipsw it extracts then this 3914 error message appears. i normal restore then it this error message appears 1601. and my iphone is in RECOVERY mode. and holding the power button and the home button doesnt do anything my latops just makes a ding sound after 6seconds. My iphone screen is just blank and will not come on and i really need help
Has the iPod been wetted?
Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Try on another computer.
Also see:
https://discussions.apple.com/message/12690674#12690674
https://discussions.apple.com/message/13032101#13032101
Last, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Issue with SRDemo error handling
Hi All,
Glad the forums are back up and running. In debugging some error-handling issues in our own application, I found an issue in the error handling code of SRDemo. I thought I'd post the issue here, as many of us (myself included) use some SRDemo code as the basis for our own applications.
The issue can be found in the oracle.srdemo.view.frameworkExt.SRDemoPageLifecycle class, specifically in the translateExceptionToFacesErrors method. I'll show the code that has the issue first, and explain the issue afterwards:
if (numAttr > 0) {
Iterator i = attributeErrors.keySet().iterator();
while (i.hasNext()) {
String attrNameKey = (String)i.next();
* Only add the error to show to the user if it was related
* to a field they can see on the screen. We accomplish this
* by checking whether there is a control binding in the current
* binding container by the same name as the attribute with
* the related exception that was reported.
ControlBinding cb =
ADFUtils.findControlBinding(bc, attrNameKey);
if (cb != null) {
String msg = (String)attributeErrors.get(attrNameKey);
if (cb instanceof JUCtrlAttrsBinding) {
attrNameKey = ((JUCtrlAttrsBinding)cb).getLabel();
JSFUtils.addFacesErrorMessage(attrNameKey, msg);
}Now, this bit of code attempts to be "smart" and only show error messages relating to attributes if those attributes are in fact displayed on the screen. It does so by using a utility method to find a control binding for the attribute name. There are two issues with this code, one obvious, and one that is a bit more subtle.
The obvious issue: if there is a binding in the page definition, it doesn't necessarily mean that the attribute is shown on the screen. It's a good approximation, but not exact.
The other issue is more subtle, and led to errors being "eaten," or not shown, in our application. The issue comes if you are using an af:table to display and update your data. In that case, the findControlBinding will not find anything for that attribute, since the attribute is contained within a table binding.
Just posting this as a word to the wary.
Best,
johnsomehow, this message got in the wrong thread....
Hi Frank,
Yes, I simply scripted it out this way to contrast the behaviour if the first attribute was read-only vs not read-only. I found the issue on a page in our app that was simply drag-and-drop the VO from the data control on the page.
It's quite annoying, because our particular use case that hit this error is a "save" button on the page. If the commit operation doesn't return any errors (and it doesn't in this use case!), we add a JSF message saying "save successful" - then the attribute errors are further added later in the page lifecycle, so we get 3 messages: "Save successful" and "Fix this error" and "Tried to set read-only attribute" - quite confusing to the end-user when the only message they should see is "fix this error."
At any rate, the fix is to simply re-order the attributes in the page definition - that doesn't affect the UI at all, other than to fix this issue.
John
it was supposed to be something like:
Hi Frank,
Thanks for the reply. I was simply posting this here so that people who use the SRDemo application techniques as a basis for developing the same functionality in their own apps (like me) can be aware of the issue, and avoid lots of head-scratching to figure out "what happened to the error message?"
John -
adobe reader issues windows 8 Error 1935.An error occurred during the installation of assembly component {B708EB72-AA82-3EB7-8BB0-D845BA35C93D}. HRESULT: 0x80070422.
I have tried many things to try to install it and I have been unsucessful. Please help I have windows 8 64bit.This did not resolve my issue, it actually made things worse. I did what
you had told me to do below, and it did not work. Tried to access the
internet to respond back to you and my computer was not able to reach the
internet. Tried reaching adobe support and not was able to, even tried
calling was on the phone for 20 minutes and no one answered. I was not able
to re install windows. Contacted Asus from another computer and they were
not able to help me reinstall windows They had asked me to ship my computer
back to them, due to them not being able to resolve the issue and help me
reinstall windows. I luckily had a backup on my external hard drive and was
able to reinstall windows 8. Spent over an hour and half trying to fix
that. Here I am still not able to install adobe reader. I was very unhappy
with what I was told to do and it gave me this issue.
· Open an Administrator command prompt: Right-click Start > All Programs >
Accessories > Command Prompt and select Run As Administrator. Click Allow
for the elevation prompt
· In the command prompt, type the command below:
fsutil resource setautoreset true C:\
The line above assumes that C: is the drive in which Vista is installed. If
it is installed on another drive like D:, change the drive letter
appropriately.
· Restart the system.
· Install Acrobat or Adobe Reader again.
Maybe you are looking for
-
Upgrade to 8.5.1 on all computers using shared variables?
Hello, We are currently using DSC 8.5 and hosting the shared variable engine on one 'server' computer with other computers subscribing to network shared variables. Some of the computers are Windows XP and others are RT. When we upgrade to DSC 8.5.1
-
When I play music, it seems to 'skip' at the beginning
I listen to music a lot on my iphone. I noticed this originally on my iPhone 4 and was assuming that it was due to the slow processor and limited memory of the '4'. I recently upgraded to an iPhone 6 with 128GB of memory and it still does has the is
-
hallo, is there a way to check if CRS will start on reboots? I mean is there a way to check if the command crsctl disable crs have been issued? (of course without rebooting the server) Thx
-
Speech Recognition Not Working. Why?
I have a 6-month old Macbook (OSX 10.5.5), and I want to try out the built in speech recognition software. For some reason, it won't accept any input, no matter the configuration I put it in. When I click calibrate, it's slow to open, and no matter w
-
I have OS 10.10.1 and Numbers 3.5. Is there a way to change the data entry default from vertically entering data in a spreadsheet----so I can enter data horizontally across a row?