Linux Error: 113: No route to host

After completeing 3.1 in the installation guide I jump down to chapter 4, but I can't get the web interface to work.
It doesn't matter how I access the URL, I've tried both http://localhost:8080/htmldb and http://realhostname:8080/htmldb/ with same result, no data at all, the connection is closed directly.
I've checked listener.log and found this:
02-NOV-2005 01:01:02 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=10.8.0.22)(PORT=2556)) * handoff * http * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12571: TNS:packet writer failure
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
Linux Error: 113: No route to host
02-NOV-2005 01:01:23 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=33183)) * handoff * http * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12571: TNS:packet writer failure
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
Linux Error: 113: No route to host
02-NOV-2005 01:02:54 * service_update * XE * 0
02-NOV-2005 01:03:01 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=X.Y.Z.W)(PORT=33509)) * handoff * http * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12571: TNS:packet writer failure
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
Linux Error: 113: No route to host

Problem located (as usual after the 3 hours it took me to find the forum and post about it).
Using netstat and lsof I found that XE not only binds to 1521 and 8080, but also to port 33172 and since iptables blocks everything it got "No route to host".
The question is if 33172 is static or just a randomly chosen port number.

Similar Messages

GoldenGate extract issue - TCP/IP error 113 (No route to host)

Hi All,
I have created a new replicat process on a new server. The old server is to be de-commissioned. after I created the replicat process on the new server (I copied the replicat prm file from the existing server - which is to be de-commissioned to new server and changed old encrypted password with new one and DISCARDFILE location), I modified the extract parameter file on source server. I changed RMTHOST and RMTTRAIL from older server name to new server name and old location to new location. once done , I stopped the extract and ran below command:
ADD RMTTRAIL /u01/app/ggs/dirdat/db, EXTRACT Ext1
and then started the extract process after which I am getting this error:
*2012-03-16 02:24:39 GGS ERROR 150 TCP/IP error 113 (No route to host).*
*2012-03-16 02:24:39 GGS ERROR 190 PROCESS ABENDING.*
I can very well ping both servers from both source and target. Any thoughts?
-Onkar

got the answer. It was firewall issue. When i turned the firewall down "service iptables stop", everything was smooth. I have raised request with the proper team to add the source ip in the target system firewall.
-Onkar

Linux error 113

on vmware , we have z box call rman.blobin.biz
I have installed RMNDB on it on port 1571 . listener is also running on this.
I am able to do sqlplus rman/rman@RMNDB.
rman.blobin.biz tnsnames.ora for this DB has following entries.
RMNDB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = rman.blobin.biz)(PORT = 1571))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = RMNDB)
MODEV =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = moprddb01.blobin.biz)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MODEV)
from this box I am able to do tnsping RMNDB as well as tnsping MODEV
there is a box moprddb01.blobin.biz which has MODEV
from that box I cna do tnsping MODEV but noy tnsping RMNDB and sqlplus rman/rman@RMNDB.
It gives me error as
ERROR:
ORA-12560: TNS:protocol adapter error
I worked with Oracle and generated Trace.
sqlnet.log is showingLinux 113 error.
Oracle is saying :
You will need to work with your local network admin and sys admin to find out what the problem
is with accessing the rman.blobin.biz node. The restrcition is occurring at the TCP layer as i
ndicated by the Linux 113 error.
we dont have onsite any Linux export or support. I set with network guy we checked port, firewall. it didnt show any issue.
I am really stuck very badly. as there is no Linux guy .
I need to do tnsping RMNDB from MODEV database box.
Any help will be appreciated.

Script started on Thu 24 Apr 2008 08:19:31 AM EDT
[root@rman ~]# uname -a^M
Linux rman.lifecell.biz 2.6.18-53.1.14.el5 #1 SMP Tue Feb 19 07:18:21 EST 2008 i686 i686 i386 GNU/Linux^M
[root@rman ~]# cat /etc/resolv.conf^M
search lifecell.biz^M
nameserver 172.16.179.202^M
nameserver 172.16.179.203^M
[root@rman ~]# ifconfig^M
eth0 Link encap:Ethernet HWaddr 00:50:56:B1:2C:07 ^M
inet addr:172.16.180.47 Bcast:172.16.255.255 Mask:255.255.0.0^M
inet6 addr: fe80::250:56ff:feb1:2c07/64 Scope:Link^M
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1^M
RX packets:55229028 errors:33 dropped:36 overruns:0 frame:0^M
TX packets:3874077 errors:0 dropped:0 overruns:0 carrier:0^M
collisions:0 txqueuelen:1000 ^M
RX bytes:1307448164 (1.2 GiB) TX bytes:497502369 (474.4 MiB)^M
Interrupt:177 Base address:0x1400 ^M
^M
lo Link encap:Local Loopback ^M
inet addr:127.0.0.1 Mask:255.0.0.0^M
inet6 addr: ::1/128 Scope:Host^M
UP LOOPBACK RUNNING MTU:16436 Metric:1^M
RX packets:4497367 errors:0 dropped:0 overruns:0 frame:0^M
TX packets:4497367 errors:0 dropped:0 overruns:0 carrier:0^M
collisions:0 txqueuelen:0 ^M
RX bytes:500146185 (476.9 MiB) TX bytes:500146185 (476.9 MiB)^M
[root@rman ~]# service iptables status^M
Table: filter^M
Chain INPUT (policy ACCEPT)^M
num target prot opt source destination ^M
1 RH-Firewall-1-INPUT all -- 0.0.0.0/0 0.0.0.0/0 ^M
^M
Chain FORWARD (policy ACCEPT)^M
num target prot opt source destination ^M
1 RH-Firewall-1-INPUT all -- 0.0.0.0/0 0.0.0.0/0 ^M
^M
Chain OUTPUT (policy ACCEPT)^M
num target prot opt source destination ^M
^M
Chain RH-Firewall-1-INPUT (2 references)^M
num target prot opt source destination ^M
1 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ^M
2 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 255 ^M
3 ACCEPT esp -- 0.0.0.0/0 0.0.0.0/0 ^M
4 ACCEPT ah -- 0.0.0.0/0 0.0.0.0/0 ^M
5 ACCEPT udp -- 0.0.0.0/0 224.0.0.251 udp dpt:5353 ^M
6 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:631 ^M
7 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:631 ^M
8 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ^M
9 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:21 ^M
10 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 ^M
11 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:443 ^M
12 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:23 ^M
13 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:80 ^M
14 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited ^M
^M
[root@rman ~]# hostname^M
rman.lifecell.biz^M
[root@rman ~]# cat /etc/hosts^M
# Do not remove the following line, or various programs^M
# that require network functionality will fail.^M
127.0.0.1 rman.lifecell.biz rman localhost.localdomain localhost^M
::1 localhost6.localdomain6 localhost6^M
172.16.180.47 rman.lifecell.biz rman^M
[root@rman ~]# exit^M
Script done on Thu 24 Apr 2008 08:20:38 AM EDT
This is the output

UDPWritePacket error 65 No route to host for -64.168.0.104

Hi,
When ARD 3 is active I see a continuous stream of the above message in Console.
The IP belongs to VeriSign. Does anyone know what ARD is doing with VeriSign?
I hope this isn't a snoop.

I am seeing this as well, but it is for numerous addresses. The -64 appears to be an artifact somehow appearing instead of 192 (as in 192.168). So I would guess that the computer you're seeing issues with is 192.168.0.104.
On mine, I'm seeing it with lots of computers, which is why I know the above. They all start with "-64.168.1." which, if the -64 were a 192, would be my subnet scheme.
I just did a count, and in the past 10 minutes, I has 30 entries in my log... from six distinct IPs. I just went to look up what computers were at those IPs, and... they don't appear in my ARD scanner. So, I looked them up in my All Computers list, and it turns out that they are all laptops which are in "All Computers" but which are currently not on my LAN.
So I would hazard a guess that this is an innocuous log entry that is informing you that ARD is attempting to see if various computers in your list have shown up on the LAN since last time it looked for them.
To validate... is 192.168.0.104 on your LAN a laptop or otherwise unconnected machine?
Mac OS X (10.4.6)

Nexus 7010 No route to host

Hi,
I needed to add vlans on the bladecenter, So added to ports on the bladecenter and then to the main trunk port of BC as well as i created the vlan on BC.
This BC connects to two main NEXUS 7010 core switch, I added to trunk port of these switches as well and vlan was already created in the nexus core switch.
but i was unable to ping the subnet gateway from the nexus core switch and gets the error as "no route to host"
Is this something there is no routing define for this subnet. As OSPF is running on the core switch.
Thanks
Sagar

Thanks Alex
VLAN was allowed on the trunk, everything related vlan is fine.
but there was no static route defined on the switch as the routing for the subnet was done on the firewall
so what i thought is to give a static route for network with next hop as firewall interface and guess what it started to work
Thanks
Sagar

No route to host:connect -- error in the struts-config.xml file

hi all,
acutally am doing a struts application in that i have written everything properly
but getting this kinda no route to host:connect error
my struts-config.xml file is like this...
<struts-config>
<form-beans>
<form-bean name="myForm" type="MyForm">
</form-beans>
<action-mappings>
<action path="/action"
               name="myForm"
               type="MyAction"
               scope="request"
               validate="true" >
               <forward name="success" path="/success.jsp" />
               <forward name="failure" path="/failure.jsp" />
     </action>
</action-mappings>
</struts-config>
sikandar

Hi Lee,
I am working on Oracle ADF 10.1.2 and getting the same problem. The lines in my struts-config.xml are as below:
<action path="/unitsView" className="oracle.adf.controller.struts.actions.DataActionMapping" type="view.UnitsViewAction" name="DataForm" parameter="/unitsView.uix" unknown="false">
<set-property property="modelReference" value="unitsViewUIModel"/>
<forward name="unitsEditLink" path="/unitsEdit.do"/>
</action>
<action path="/unitsView" className="oracle.adf.controller.struts.actions.DataActionMapping" type="view.UnitsViewAction" name="DataForm" parameter="/unitsView.uix" unknown="false">
<set-property property="modelReference" value="unitsViewUIModel"/>
<forward name="unitsCreateLink" path="/unitsCreate.do"/>
</action>
I have two lines with [action path="/unitsView"]. The reason why is that I want the user to go to the form create screen for the create button and form edit screen for the edit button. If this does not work, it seems to mean that only a single screen can be used for create/edit functions. However, the ADF editor diagram looks perfectly to point to create.uix and edit.uix respectively.
Please shed some light.
Thanks,
Regards,
Michael

FTP receiver channel error: No route to host

Hello,
I am using a ftp receiver channel and got the following error:
java.lang.Exception: ftp access error: java.net.NoRouteToHostException: No route to host.
The following steps are processed right:
- Connection to FTP-Server "XXXX", Folder "/public_html/external/eh/"
- Write to FTP-Server "XXXX", Folder "/public_html/external/eh/", file "xyz.xml"
- Sending: Modus "TXT", Size XXX, Codepage UTF-8
And then the error occurs.
It seems that the channel could connect to the server and start sending the data, but then the error occurs.
Did anybody know this problem?
Thank you very much
Thomas

Hi Thomas -
Is your FTP server configured for active or passive data connections? If active, you need SP15. Before SP15, only passive data connections are supported.
Regards,
Jin

NAT error: UDP OK but TCP = no route to host

I recently did a firmware update on my Airport Express and I think something has changed which is affecting file transfer speed. A NAT test shows UDP listen port 6881 is OK but when testing TCP listen port 6881 I get the following message:
NAT error: No route to host (173.19.148.196:6881)
I have Mediacom Cable and their provided modem is Touchstone Telephony Modem and my Airport Express is plugged into it to provide me a wireless connection (it has an IP address of 10.0.1.1).
I have a MacBook 4,1 Intel Core 2 Duo and run OS X v. 10.5.6. In Security settings my Firewall is OFF.
Can someone explain to me what I need to do to open the TCP port? Also, what is a UDP connection?
Thank you

i had the same problem.
and i did the following steps
on vuze program
1) vuze -> preferences -> incoming tcp listen port (example 50123)
2) set the same port on UDP
after that you have to open tcp protocol (NAT -> virtual server) ... on your router and set start port as the same port as you already set in vuze (ex. 50123)... and an end port (ex. 50124)
be careful as local ip address, you have to set the same ip in the tcp protocol settings with the ip that your macbook uses to connect to the internet. you can find the ip on system preferences --> web--> and get the information.
I hope to help you and others with the same problem!

RMI connection Error: No route to host

hi all,
We are using RMI in our project and We are using different computers on LAN for
server and Client Component,
Both the computers use j2sdk1.4.2_03
But when the client runs it gives the following error:
:java.rmi.ConnectIOException: Exception creating connection to: gridlab26;
nested exception is:
java.net.NoRouteToHostException: No route to host: connect
In this scenario we are just retrieving a String from the server. this
works well on One PC using localhost.
we found that you have encountered such problem earlier and might have
resolved it.
if you have any idea how to correct this problem please help us.
thanks
[email protected]

hi,
yes both the PCs are pinging each other and we are able to share our things as well (with sharing n securiry facility in winXP)
if u hav any other suggestion plz convey me
tnx
Deep

I am getting continuous "no route to host" errors

I am getting hundreds of these messages a day and my connections are very slow.
1/28/15 10:41:33.971 AM nsurlsessiond[179]: tcp_connection_destination_prepare_complete 3 connectx to 17.253.16.221:80@0 failed: No route to host
also at 69.164.12.53 and 8.27.250.126 and others.
Chrome is slow loading Google Mail and pages.
Just updated to 10.10.2, which didn't help.
Model Name: Mac mini
Model Identifier: Macmini6,2
Processor Name: Intel Core i7
Processor Speed: 2.3 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 16 GB
Boot ROM Version: MM61.0106.B03
Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: a8:20:66:12:59:5a
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
DNS:
Server Addresses: 2001:4860:4860::8888, 2001:4860:4860::8844
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes

Are there any other devices on your network, and if so, are they having Internet problems? If you haven't already done so, please restart the router (and the broadband adapter, if they're separate.)

Remote RSS Feed consumption - no route to host

Hi all, I tried to embed an external RSS feed but always get the error that Service SS_GET_PAGE and Function getRssFeedForUrl cannot be performed due to System Error : No route to host. I guess that the server needs a proxy setting in order to connect to the external proxy. I cannot figure out how to configure the content server to retrieve those external URLs. Is there a specific config file to set the proxy value or do I have to set the proper environment variable on Linux (that was my first guess but I did not succeed). Thanks for any hint.

That could mean one of two things: either the default route is not set on the host giving this error message or IP packets destined to the target host can not be routed due to network misconfiguration.

External services moved, but SOA suite still gives "no route to host"

We have a SOA Suite integrating towards external services. The external service provider moved the services to a different server, and updated dns entries to reflect this move. But our SOA Suite gave "no route to host" errors when this move was performed, clearly not reloading the changes done in DNS, but still using the old address.
How and where can the SOA Suite be configured to actually time out domain name resolutions, when external services are moved this way. Can we ask it to use hostname instead of ip address.
Bouncing the servers is of course working, but there must be a configuraiton way around this.
bouncing production servers is the final resort.
Details of error message
<MSG_TEXT>BusinessEvent diapatch failed for {ESBDomain.Service.publish} with error An unhandled exception has been thrown in the ESB system. The exception reported is: "oracle.tip.esb.server.common.exceptions.BusinessEventRetriableException: An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: No route to host: connect

also check for firewalls on the server - a good test would be to an attempt to telnet into webservice hostname and portnumber from the SOA Server.
Regards,
Shanmu.

Linux error :13 permission denied.

Hi ,
When I am trying to create a database I am getting the following errors.
ORA - 01501 Create database failed.
ORA-00200 Control file couldn't be created.
ORA -00202 Control file :'/disk1/oradata/DEMO/CONTROL1.ctl'
ORA-27040 skgfrcre: create error, unable to create file.
Linux error 13: Permission denied.
Here I could see the directory exists.
I have changed the permissions to chmod 6751 $ORACLE_HOME/bin/oracle.
What else could be the possible error am I making?
Thanks,
Radhika.

Hi ,
When I am trying to create a database (change default password), using sapinst, I am getting the following errors.
27-OCT-2006 16:16:50 * (CONNECT_DATA=(SID=SSM)(GLOBAL_NAME=SSM.WORLD)(CID=(PROGRAM=sqlplus@spank)(HOST=spank)(USER=ssmadm))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.23.9)(PORT=12960)) * establish * SSM * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12546: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00516: Permission denied
Linux Error: 13: Permission denied
What else could be the possible error am I making?
Thanks,
Edoardo Carletti

Java.lang.RuntimeException: No route to host in Work Flow

Dear All,
Workflow containers are not starting up due to follwing errorin log file.
"{oracle.apps.fnd.profiles.ExtendedProfileStore@1a80aea}],mUniqueId=SVC-GSM-WFMLRSVC-2201985,mLevel=4
}, oracle.jdbc.driver.T4CConnection@1e2670b, 10006, STOPPED_ERROR, Could not handle the control
event -> java.lang.RuntimeException: No route to host) "
Checked Metalink and google but could't find the troubles hooting steps.
Request anybody to guide me to troubleshoot above issue.
Regards,
Sunil.

Sunil,
Please see these docs.
Workflow Service Component is System Deactivated with Error Details : Could not handle the control event -> java.lang.OutOfMemoryError: unable to create new native thread [ID 842968.1]
Unable To Start Workflow Notification Mailer [ID 418329.1]
Java Mailer wont start OPEN_MAIL_FYI=The requested template does not exist [ID 331358.1]
Thanks,
Hussein

Linux Error:111:Connection refused & Linux Error:29:Illegal seek

I have installed the rpm pack oracle-xe-univ-10.2.0.1-1.0.i386.rpm in Red Hat Enterprise Linux. I was able to install the rpm pack and am able to initiat sqlplus on the server and even run sql queries.
However i am facing the following issues:-
1) While browsing http://127.0.0.1:8090/apex for accessing the database home page i am getting the error message "The connection was refused when connecting to http://127.0.0.1:8090/apex" (i have mentioned 8090 as the HTTP port during configuration and this is the URL which was listed after the configuration).
2) I am unable to start the listerner service.
Please help me to resolve the above issues.
Following is the message while checking the listener status:-_
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=RHL-Research-001)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
Following is the message while initiating a listener:-_
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=RHL-Research-001)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
Following is the content of the listerner.ora file:-_
[root@RHL-Research-001 admin]# cat listener.ora
# listener.ora Network Configuration File:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = RHL-Research-001)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
Following is the content of /etc/hosts:-_
[root@RHL-Research-001 admin]# cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 RHL-Research-001 localhost.localdomain localhost
[root@RHL-Research-001 admin]#
Following is the pinging status:-_
[root@RHL-Research-001 admin]# ping RHL-Research-001
PING RHL-Research-001 (127.0.0.1) 56(84) bytes of data.
64 bytes from RHL-Research-001 (127.0.0.1): icmp_seq=0 ttl=0 time=0.050 ms
64 bytes from RHL-Research-001 (127.0.0.1): icmp_seq=1 ttl=0 time=0.049 ms
64 bytes from RHL-Research-001 (127.0.0.1): icmp_seq=2 ttl=0 time=0.051 ms
64 bytes from RHL-Research-001 (127.0.0.1): icmp_seq=3 ttl=0 time=0.052 ms
64 bytes from RHL-Research-001 (127.0.0.1): icmp_seq=4 ttl=0 time=0.050 ms
64 bytes from RHL-Research-001 (127.0.0.1): icmp_seq=5 ttl=0 time=0.046 ms
64 bytes from RHL-Research-001 (127.0.0.1): icmp_seq=6 ttl=0 time=0.051 ms
--- RHL-Research-001 ping statistics ---
7 packets transmitted, 7 received, 0% packet loss, time 6016ms
rtt min/avg/max/mdev = 0.046/0.049/0.052/0.009 ms, pipe 2
Thanks,
SKP

I had to re-install the linux server and install the oracle rpm again ... resulting in delayed reply.
Currently still i am unable to access http://127.0.0.1:8090/apex. The following error message is being displayed
"The connection was refused when attempting to contact http://127.0.0.1:8090/apex"
However now the listener service has started successfully.
Following is the output of the command lsnrctl status:-
bash-2.05b$ lsnrctl status
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 24-FEB-2010 17:55:02
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 24-FEB-2010 17:35:26
Uptime 0 days 0 hr. 19 min. 36 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Listener Log File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=selinux)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XE" has 1 instance(s).
Instance "XE", status BLOCKED, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
Instance "XE", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
Following is the output of the command env|sort:-
bash-2.05b$ env|sort
COLORTERM=gnome-terminal
DISPLAY=:0.0
G_BROKEN_FILENAMES=1
GDMSESSION=Default
GNOME_DESKTOP_SESSION_ID=Default
GTK_RC_FILES=/etc/gtk/gtkrc:/usr/lib/oracle/xe/.gtkrc-1.2-gnome2
HISTSIZE=1000
HOME=/usr/lib/oracle/xe
HOSTNAME=selinux
INPUTRC=/etc/inputrc
LANG=en_US.UTF-8
LD_LIBRARY_PATH=/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/lib:
LESSOPEN=|/usr/bin/lesspipe.sh %s
LOGNAME=oracle
LS_COLORS=
MAIL=/var/spool/mail/oracle
NLS_LANG=AMERICAN_AMERICA.AL32UTF8
ORACLE_HOME=/usr/lib/oracle/xe/app/oracle/product/10.2.0/server
ORACLE_SID=XE
PATH=/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/usr/lib/oracle/xe/bin
PWD=/usr/lib/oracle/xe
SESSION_MANAGER=local/selinux:/tmp/.ICE-unix/4320
SHELL=/bin/bash
SHLVL=2
SSH_AGENT_PID=4365
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
SSH_AUTH_SOCK=/tmp/ssh-Jsbl4320/agent.4320
TERM=xterm
USER=oracle
_=/usr/bin/env
WINDOWID=27268667
XAUTHORITY=/usr/lib/oracle/xe/.Xauthority
XMODIFIERS=@im=none
bash-2.05b$
Please let me know how to resolve this issue of accessing the database home page at http://127.0.0.1:8090/apex.
Thanks,
SKP

Linux Error: 113: No route to host

Similar Messages

Maybe you are looking for