Goods in Transit (GIT) not getting CIFfed to APO

Dear Collegues,
I have been trying to CIF Stock from R/3 to APO, in vain. please read the details below and advise:
To test the ASN/GIT transfer to APO, we got the Purchase Orders (PO) created in R/3 for a sample of SKUs. After this, we got the deliveries created against these POs, and the CONRELs in APO got converted into Stock Transf. Deliveries. For the next step, we got the PGI done for those deliveries, after which the Deliveries got converted into GIT in R/3. on CIFfing the same to APO, it does not get CIFfed at that destination location (location where it appears as GIT in R/3). the error shows is "No Stock Posting for product xxxxxxxand Location yyyyyy possible".
we have checked the masters in APO (product and location) and everything is in place. on running the Consistency Checks (OM17 & TS_LCM_CONS_CHECK), nothing appears erroneous and everything is consistent. even then, the GIT is not going into APO.
Please suggest/advise on how this can be resolved.
Regards,
Jas Preet Singh

Hi Pankaj,
Analyze the records of TCL_ATINN_IDENT table (APO side) for that characteristic.
1. SOURCE - maybe that characteristic was CIFfed from another Logical system
2. ATINN_OLD, ATNAM - must be the same as in ECC (CABN table).
So you can catch the cause of error.
Regards,
Alexander

Similar Messages

I installed win8 64bit on macbook pro. everything running good but i am not getting sound in speakers. i am getting sound in earphone/headphones but not in main speakers.

i installed win8 64bit on macbook pro. everything running good but i am not getting sound in speakers. i am getting sound in earphone/headphones but not in main speakers.

Have you checked System Preferences -> Sound to see the Output when nothing is plugged in the headphone jack? Also, check if the headphone jack shows a faint read-light, which is the optical laser.

PIR & CIR is not getting displayed in APO product master

Hi guys,
I have created PIR and CIR in R/3 ,but it is not getting displayed in APO . Please guide me to resolving this what are the settings i have to check in the SAP system.
Thanks
S.Murali

I am Basis consultant.
Regarding RFC, logical system assinement, are the things are configured.
But still it is not active the integration between R/3 & APO server.
(Behalf of Murali )

Stock value is not getting updated in APO system From ECC automatically

Hi All,
Stock value is not getting updated in APO system From ECC automatically but if we do it manually from transaction CFM2 it will get updated.
for this we are using EXIT_SAPLCSTK_001.
I am using VL10A for delivery and VL06G for PGI
I have also checked integration model for material and stock.
Please help me out as it is very urgent.
Thanks,
Gaurav Mittal
Edited by: GAURAV MITTAL on Feb 6, 2008 6:09 PM

Hi,
for transferring the stock data from R/3 to APO automatically, you need to have the integration model for material and stock activated.
please check the same.
if this does not help, let me know in detail the steps which you are following..
Ram

Stock transfer PRs are not getting created in APO

Hi,
I have a plant-to-plant transfer is configured using special procurement type. When APO creates stock.PRs , it does not provide any numbers to PRs and they are not getting trasnfered to R3. CIF model for PIR & POs are running good.
In CIF post processing these PRs as stuck and I see " Vendor master data does not exist for plant A" . There is vendor master data created for plant A in R3 and material info record also exists.
How to de-bug this post processing queue to see what is missing in vendor master data?
regards,
shan

Hi
Can you explain in detail your scenario..you say plant A so I suppose there is plant named B in your scenario. which one is the source location and which one destination location?
In Stock transfer from plant to plant scenario, key is to have correct settings for the system to do source determination.
Assuming plant A as destination and plant B as source. First, The material should be maintained at both the plants.
You need to have a purchasing info record(ME11) linking your material and the source plant B.
I assume you are using external procurement type in your material master. Special procurement type 40 (stock transfer)should be maintained in material master.
Then the system creates a STReq and PurReq using the source plant B. For the system to do this source determination should happen. To verify that..you can check the following...
When you transfer the purchasing info record, system automatically generates the external procurement relationships with source location as plant B, destination location as plant A and info record reference.
When you transfer material master data, the system auto'lly generates transportation lanes between plant A and plant B. (keep in mind transportation lanes should be manually created here)
So in essence you have to check if all the above things are done by the system.
Hope Im clear in this
regards
Mohan V R Chunchu

Purchase Requisition not getting generated in APO

Hi,
I am facing an issue in APO. Once I confirm a sales order, I have to run the Product Heuristic in APO to generate the purchase requisition through rrp3. The problem is the purchase requisition is getting generated without the PR number. The line does not show the number and also the purchase req is not reflecting in ECC. Please refer the screenshot. Kindly help me with this.
Thanks & Regards,
Raja S

Hi Guys,
Sorry for the delayed response. Now got another issue. My CIF model for a Sales Order is not getting activated. I also cleared the queue in APO through /sapapo/cq and then start running the CIF. But it runs for a long period.
What could be the other possible issues with CIF model activation?
I am getting a message box like the below when try to activate the CIF. I keep ignoring the message and trying to run the CIF. But still I am unable to resolve. Kindly help
After resolving this only, I can go for the above mentioned issue. I sincerely thank all your support.
Regards
Raja S

Order category BF not getting deleted in APO

Hi Experts,
I have a situation where the material is already deleted in ECC (hence no longer existing), but the product is existing in APO and we need to delete this in APO. To do this, we need to delete the dependent orders for that product/location first and then other dependencies.
There are few orders for the prod/loc as confirmed purchase orders (ord cat BF). These orders are now PP/DS orders with status as PP firmed, output firmed and date fixed.
I have tried the two programs- /sapapo/rlcdelete and /sapapo/delete_pp_order, but system is not picking up the orders to delete.
The system shows as message as " No deletion of converted orders in active version"
As I said earlier, the product is no longer existing in ECC, hence I can not delete the orders from there.
Is there any other way to achieve this? Is there any BADI to do this in APO?
Regards
Manotosh

Hi
You can use /SAPAPO/DELETE_PP_ORDER report for deleting these orders.
Execute the this report, mention all the products for which you want to delete the order and execute it. It might give the message as orders will not get deleted as inactive in APO.
Go back please enter as DEL_EXECU, in the place where we use to enter the T-codes and enter and than again execute the report. It will delete the orders.
You can also try /SAPAPO/SDORDER_DEL report.
Thanks
Amol

Free Goods Condition table records not getting downloaded from R/3 to CRM

Hi Friends,
I'm trying to download free goods condition records from R/3 to CRM. i have already downloaded condition techique, procedure, condition type, access sequece.
Now i am tryin to download Free goods condition table for Example: KOTN602 to CRM. I created new condition adapter ZDNL_COND_N602 by coping standared adapter DNL_COND_N010 and changed to table table. now i have the following tables in table section.
KONDN
KONDNS
KOTN602
TMC1K
No filter has been set as we have only one record in table KOTN602 in R/3.
i had run initial load of this adapter ZDNL_COND_N602 thr R3AS, then I checked in R3AM, the status is canged to Green. but when I checked in CRM table /1CN/CCFCUS602, no data available in this table ( NO download happens).
Can you please suggest what could be the reason and what is missing?
Thanks
Bharthi

Hello Bharti,
Please make sure in txn R3AC5, for you Z* adapter object, under the tab 'Mapping Modules: R/3 to CRM', you just have
single entry of CND_MAP_MAST_EXCHANGE_MAIN_MBD.
If there are double entries please delete the duplicate.
Also, you can check the logs using txn CND_MAP_LOG_DISPLAY
Object : COND_EXCHANGE
Sub-Object: CONDITIONS
Please give the 'From' and 'To' correctly, to get the correct log messages.
This will give you some hint.
Hope this helps!
Best Regards,
Shanthala Kudva.

Product description- is not getting updated..

Hi APO Expert,
I am getting error in description of product - it is not getting updated..
Material description is changed in R/3 same is not getting extracted in APO. However, other forecast data and transaction data of extracted successfully. Please note Product start data is maintained from few days onwards.
Regards

Hi Rushikesh,
Go to CFC9 in R/3 and check what value do you see for material master change transfer:
1) If it's blank, you won't get changes from R/3 to APO. If your CIF jobs run daily, then change the value of 1. Changes will come to APo after CIF job for material will finish.
2) If it's 1, then you need to re-CIF the material to get the changes in APO
3) if it's 2, only then the changes are supposed to happen immediately when you change the description in R/3. If your setting is 2, then you need to check if an active integration model (IM) exists for your product or not. Go to CFM5, give your product and check if an active IM exists.
PS: not clear regarding your comments about forecast. Forecast could go from APO to R/3, and not the other way around.
Thanks - Pawan

BED AED SED are not getting capture in J1IIN

Hi,
I have problem in capturing Sales Excise from J1IIN T Code.
Sales order is been done Excise condition is given which is showing in the condition properly. So after doing its Billing Document and generating Accounting Document is generated. So in the BED Condition the amount is showing properly i.e 500 but when I am doing J1IIN T Code there are no values in BED AED SED. Also its giving me message No defaults could be proposed for Excise utilization.
So if some has came across this hurdle can guide me.
It would be highly appreciated. Also guide me if there is any config to be done.
Points will awarded.
Regards,
Arvind.
Edited by: Arvind K on Jun 25, 2008 5:11 PM

Hello,
In my opinion you have not maintained the Excise details.
Maintain
Chapter ID
Material & Chater ID Combination
Assesable Value
Cenvat Determination
Vendor Excise Details ( Check the Excise Indicator) as 1
because of not maintaining these Excise details, values are not caluclated in the Purchase Order.
Due to this reason while doing Goods receipt, system is not getting the Excise Values.
Please maintain and let me know.
Regards,
Kumar

Product ID is not getting updated in SC Goods /Service field

Hi Gurus,
While creating shopping carts in EBP, we are able to find the Product ID from the Good/Service find option, but when we select the Product ID in the search, it's not getting updated in the SC Goods/Service field.Also when we try to find the Cost center / WBS using find button it's not going to the search area after software upgrade.
Could you please suggest us why system is behaving like this.
Thanks
Sada

Hi Gurus,
Any Idea on this.
Also few of the Product ID's are getting updated from the search help to Goods /Service field of the SC and some are not getting updated. while debug the SC , we are geeting the error message as BBP_SC006, Its relavant to catlog. But we are not transfering the Product from catlog to SC item.
The error mesage as: Good/Service & does not exist.
Thanks & regards
Sada

Good morning a few weeks ago I send the request for the replacement program of my ipod nano 1st generation and they sent me the shipping box but I did not get the label to go back, and I can not return it , i need to you sent me again the box for retu

Good morning a few weeks ago I send the request for the replacement program of my ipod nano 1st generation and they sent me the shipping box but I did not get the label to go back, and I can not return it , i need to you sent me again the box for return the ipod

Best thing would be to call Apple up again, and let them what has happened and they'll help you!

Free Goods are not getting exploded in to Sales Return Order

Dear All
I have created one order in which I am giving 13:1 (inclusive) free goods using VBN1.
Order Qty               Converted to             Item Category
288 (13:1)              266 (With Price)      ZTAN
                               22 (Free)               ZTNN
I am having no problem upto Invoice. But while making return sales order with ref. to the invoice, it's throwing a message 'The system didn't find a valid bill of material' and free qty of 22 pcs are not getting imported into the return order.
Please help

Hi
Returns Orders has document category H where the free goods are not supported may be because of this it is not get imported.See details below.
http://help.sap.com/saphelp_47x200/helpdata/en/dd/55fa4e545a11d1a7020000e829fd11/frameset.htm
Regards
Ramesh

Quantity field not getting update in PCA document for Goods Receipt

We have the Purchase Account activated for our company code.
For movement type 101 (Goods Receipt), I am getting the quantity field updated for GR/IR account and Stock Account (B/S item).
But the quantity field is not getting updated for the "Purchase Account" and the "other offsetting PL A/C).
Please advice whether I am missing something.
Regards
B.Mohanty

Hi Aravind,
Check SAP notes 1063198 and 1117587.
FAGLL03 display quantity which is updated in FAGLFLEXA, BSEG is not
relevant in this case. This is clearly explained in the note 1063198.
The quantity posts through to FI on the 'goods receipt' items, but not on the
'invoice receipt' items.
In the FI normally the Quantity is not a 'real' important field, as it
is more related to the MM area.
But in the old 'Profit Center Accounting' and the old' Special Ledger'
the field has been important.
As the same logic of these areas to 'store' the Quantity is also used
in the NewG/L the field get only filled in the line, where it make
'sense' from our point of view, because only in the 'goods receipt'
lines a 'real' Quantity is posted to the system.
So as before in the PCA and SL, now also in the NewG/L the Quantity is
filled in the correct and important lines and postings.
In the BSEG ('old document segment table') the field is filled 'just'
as it is send to the FI, but this is not completely correct from the
business point of view.
This can also lead to issues with the reporting and summation to this
field. So with creating the new logic in the NewG/L the 'correct'
standard of the 'writing' for the Quantity has also been taken over.
So in the end, the update and display is correct according SAP standard behavior.
Actually,Quantities within G/L are never reliable,
because the purpose of FI is a view on the data according to amount
but not according to quantity.
In the FI normally the Quantity is not a 'real' important field, as it
is more related to the MM area.
I hope I could be of assistance.
Regards,
Fernando

DO NOT Get The Service With This Company IF You Want to Receive a Good Customer Service

It is really a pain, dissatisfaction, and a lot more when you have Verizon as your service provider. I have been having service for my cellphones with Verizon for over 3 years, and did not have any major problems, so when I moved to my new place I thought it’s better to get the Fios, and have one bill for my all Verizon services. I went online and started to order my products online. During ordering, the chat session opened and I started chatting with the Customer Service Rep in order to get help through the process. When we were in the step that I could order the home phone plan, I saw the International World Plan, and I asked the lady to give me some information about this plan. I asked her that I want to call to my country and I mentioned my country’s name to her as well. I asked her that if this service is available for my country, and she said “Yes” you can call to over 100 countries with this service and she encouraged me to get the 300 minutes service. Since the plan sounded good to me I decided to get the 500 minutes instead of 300 min, and after I ordered my plan, I started calling overseas, and happy that I am paying less than the Phone cards with this plan. On March 26 I received my bill, and saw that Verizon charged me 142 $ for the less than 200 minutes that I called to my country, and there was a Letter “N” in front of each phone calls. I checked the guide to see what does “N” mean, and I saw that it said N means “Denoted calls are NOT listed in World Plan”. Well, thanks to the lady who gave me the wrong information while I was ordering my plan online, but she or the Verizon company is not that much lucky because I printed my chat session the day I ordered my plan since I wanted to have the information of what I actually had ordered. That time I did not think that I may get in trouble like this. Since March 27th, I have been calling Verizon every other day, and I have explained my issue to more than 10 Customer Service Reps, and each of them asked me to fax my chat session to them. I have been faxing that to all the numbers that they gave me, and I am keep faxing them, but do not get any respond. One of the Verizon’s Supervisors, whose name is Mark, called twice on my home phone number during the daytime, around 3 pm, and he left massages. On his second massage, he said that he checked the plan and my country is not listed in the International World Plan. He just said this, and he said that he was going to call me back, but never happened. He also did not leave me any phone number that I could call back. Also, since my cellphones are listed in the same bill as my other products, he could easily see the other numbers that he could call and reach me, but he did not bother himself to do so. I have even changed my home voice mail greeting addressing to Verizon, and left my cellphone number in voice mail greeting. I am so sorry that I have to say this, but this seems a definite fraud to me. I did not know about this plan, and I asked the Customer Service Rep to help me. She was responsible to check my country, or at least let me know how I could find out about the coverage. This is ridiculous, and if Verizon cannot take over this problem, my lawyer will take the action over, and takes the issue to their corporate court. I am not going to give up about this, and I decide to give Verizon about a week or so to solve this issue, but I won’t wait more than that. Just a friendly advice to people who want to get the home service through Verizon: DO NOT Get The Service With This Company IF You Want to Receive a Good Customer Service. There is nothing about taking care of customer in this company, and you are going to be stuck with what you get.

Mahsa21,
We are glad that we were able to resolve the international calling plan issue for you. If you need assistance,please reach out to us.
thanks,
Tonya D.

Goods in Transit (GIT) not getting CIFfed to APO

Similar Messages

Maybe you are looking for