Quantity field not getting update in PCA document for Goods Receipt

We have the Purchase Account activated for our company code.
For movement type 101 (Goods Receipt), I am getting the quantity field updated for GR/IR account and Stock Account (B/S item).
But the quantity field is not getting updated for the "Purchase Account" and the "other offsetting PL A/C).
Please advice whether I am missing something.
Regards
B.Mohanty

Hi Aravind,
Check SAP notes 1063198 and 1117587.
FAGLL03 display quantity which is updated in FAGLFLEXA, BSEG is not
relevant in this case. This is clearly explained in the note 1063198.
The quantity posts through to FI on the 'goods receipt' items, but not on the
'invoice receipt' items.
In the FI normally the Quantity is not a 'real' important field, as it
is more related to the MM area.
But in the old 'Profit Center Accounting' and the old' Special Ledger'
the field has been important.
As the same logic of these areas to 'store' the Quantity is also used
in the NewG/L the field get only filled in the line, where it make
'sense' from our point of view, because only in the 'goods receipt'
lines a 'real' Quantity is posted to the system.
So as before in the PCA and SL, now also in the NewG/L the Quantity is
filled in the correct and important lines and postings.
In the BSEG ('old document segment table') the field is filled 'just'
as it is send to the FI, but this is not completely correct from the
business point of view.
This can also lead to issues with the reporting and summation to this
field. So with creating the new logic in the NewG/L the 'correct'
standard of the 'writing' for the Quantity has also been taken over.
So in the end, the update and display is correct according SAP standard behavior.
Actually,Quantities within G/L are never reliable,
because the purpose of FI is a view on the data according to amount
but not according to quantity.
In the FI normally the Quantity is not a 'real' important field, as it
is more related to the MM area.
I hope I could be of assistance.
Regards,
Fernando

Similar Messages

Item text (BSEG-SGTXT) is not getting updated in Payment document generated

Hi All,
Item text (BSEG-SGTXT) is not getting updated in Payment document generated through F110.
After generating the payment document via Transaction Code u2013 F110, system is not updating the
Text field (BSEG-SGTXT) in the payment document with the text that we have entered in the Invoice (MIRO or FI Invoice).
In case of manual payment (F-53) we can input the text manually hence that will get updated in
payment document but this thing is not possible with F110.
How can I update it?
Is there any configuration for that?
Thanks
Daniel Dorta

Hi All,
I've applied the two notes as recommended. However, when I run FBL3N for payment run items, the Text field is update with wrong data, i.e. not from the Text field in FB60
Thus, I'll like someone to help me with what should exactly be done on the 'Step', 'Pre-requisite' and 'Substitution' side of the Substitution rule (TCode GGB1), I did not fill anything in the Pre-requisite box - is this right?
Thanx in advance.

Item text is not getting updated in Payment document generated through F110

Hi all,
After generating the payment document via Transaction Code u2013 F110, system is not updating the Text field in the payment document with the text that we have entered in the Invoice (MIRO or FI Invoice).
While processing the document via transaction code u2013 F110, in the layout shown for the Invoices to be considered for payment (screen of u201CEdit Proposalu201D), text is not getting updated. When we pressed F1 at the Text field (Which is blank) we came to know that it is a u201CItem Textu201D with u201CTable u2013 REGUEu201D / u201CField u2013 SGTXTu201D.
In BSEG (SGTXT field) as well as BSIK (SGTXT field) we are getting the Invoice document with the text maintained in it via MIRO or FI invoice.
But while processing the invoices through Tcode - F110, in the layout of Edit Proposal (Table - REGUE / Field - SGTXT) we are not getting the u201CText fieldu201D but getting the other data such as Doc. No.( Table - REGUE / Field - BELNR), Fiscal Year (Table - REGUE / Field - GJAHR) etc for processing the proposal which is getting shown in BSEG as well as BSIK.
In case of manual payment (F-53) we can input the text manually hence that will get updated in payment document but this thing is not possible with F110.
Can anybody guide me on getting the ItemText (Not Doc. Header text) in FI payment document after F110 execution?
Regards,
Shridhar

Hi Suresh,
Thanks for the prompt reply. We will be obliged if you guide us in that respect since F110 is a Std. SAP code.
Have you refer OSS before arriving at the conclusion of developing ABAP program since the Item Text is a std. field of Std. Tcode - F110. Same should had been get updated while making the payment in reference to the Invoice which haves item text in it ?
Regards
Shridhar
FICO

Field not getting updated in BDC while running in background

Hi Friends,
I'm executing a BDC transaction to update the Alternate Tax Classification (VBAK_TAXK1) field in Sales Order. I'm passing value 1 to the field and then saving it directly. While running the BDC in background, the field is not getting updated. On the other hand i checked it running in foreground, the field got updated without any error message.
Can anybody help me advicing why the field is not getting updated in background?
Thanks,
Bestin

Hi ,
Check the the log if you are using a session method and if call transaction then capture the messages for the same,
Because in the foreground the BDC will update the records even if there is a warning message nut in background it will not update. So check the data which you are inserting and try avoid the warning messages also so that it can run smoothly in backfround.
Thanks & Regards
Jyo

Custom fields not getting updated in Mass Maintenance-MM17

Hi,
I have created a custom field in MARC table and the data is getting updated to the MARC table through MM01/MM02 but it is not getting updated by MM17. I have checked the notes 44410, 576160, 414020 and 116311. I have done the following changes as per the sap notes.
1. Created a custom segment ZE1MARCM by copying the standard segment E1MARCM and added the custom field in that
    segment.
2. I have extended the IDOC 'MATMAS03' and added the custom segment ZE1MARCM to E1MARAM.
3. Created a new entry in we82 and provided the extension type 'ZMATMAS03' and release '701'.
4. Adjusted the partner profile in we20 for matmas with port and providing the extension idoc type.
5. Added the custom field in the table MASSFLDLST.
6. Implemented the code in BADI 'MG_MASS_NEWSEG' and exits 'EXIT_SAPLMV01_002' , 'EXIT_SAPLMV02_002' as per the
    sap notes.
The custom field is not getting updated through mass maintenance. Please let me know if i have missed anything?
Thanks,
Geeta

I had this same question several years ago. Please check my answer at Initialize MARC Custom Fields Using MM17 Does Not Work

REGUP Table Withholding tax field not getting updated

hi friends,
from a specifc date with holdiing tax is not getting updated in REGUP-QBSHH field, so in payment advice its not getting displayed. can any one help me wat could be the problem for this
thanks
nagaraj

hi amir,
i dont have test case for that. till 28th of the last month the field has been updated and after that till now all the entries in that field is showing zero. but when we check in FB03. i can see the with holding tax amount. can u tell me how this table is getting updated
thanks

Overdelivery tolerance- confirm quantity (allocation) not getting updated

Hi All
    I have a strange problem......could this be a gap with the SAP program
I am using over and under delivery tolerance (say 10%) in the customer master - sales - shipping tab. Now i create a order with
Order qty          1100
confirmed qty   1100
delivery qty      1200      (since we have maintained 10 % over delivery tolerance)
Now i want to update the order to 1200 for two reasons
1) to keep the order in sync with delivery
2) to update the allocations (this is because we have Allocation activated and not ATP at schedule line level)
So when i go into the order and update the line to 1200 the following happens
Order qty             1200
confirmed qty      1100   (not updated)
delivery qty         1200
So my confirm qty is not getting updated to 1200 and hence my allocation tables are not getting updated. The same is getting updated when we have ATP at schedule line level. Could this be a gap with SAP that i dosent update allocations in this scenario.
The reason it dosent confirm is that it assumes that the delivery is completed and since we have tolerance maintained it assumed to be a good scenario.
Please help.
Vikas
Edited by: Vikas BhumiReddy on Oct 28, 2009 5:27 PM

I am also facing the same issue. Have you found out any solution regarding this.

Quantity field not getting displayed for all document types

Hi,
I have made a configuration to include field Quantity(BSEG-MENGE) in the GL account line item display.When I ran the report for stock adjustment account(FAGLL03), only the following document types are showing quantity against them.
WI- Inventory document
WA-Goods Issue
WE---Not showing quantity against (WE- Goods Receipt)
Can any one please explain. I have seen the original document from FI document. The original document as well as FI document carries quantity.
Thanks
Aravind

Hi Aravind,
Check SAP notes 1063198 and 1117587.
FAGLL03 display quantity which is updated in FAGLFLEXA, BSEG is not
relevant in this case. This is clearly explained in the note 1063198.
The quantity posts through to FI on the 'goods receipt' items, but not on the
'invoice receipt' items.
In the FI normally the Quantity is not a 'real' important field, as it
is more related to the MM area.
But in the old 'Profit Center Accounting' and the old' Special Ledger'
the field has been important.
As the same logic of these areas to 'store' the Quantity is also used
in the NewG/L the field get only filled in the line, where it make
'sense' from our point of view, because only in the 'goods receipt'
lines a 'real' Quantity is posted to the system.
So as before in the PCA and SL, now also in the NewG/L the Quantity is
filled in the correct and important lines and postings.
In the BSEG ('old document segment table') the field is filled 'just'
as it is send to the FI, but this is not completely correct from the
business point of view.
This can also lead to issues with the reporting and summation to this
field. So with creating the new logic in the NewG/L the 'correct'
standard of the 'writing' for the Quantity has also been taken over.
So in the end, the update and display is correct according SAP standard behavior.
Actually,Quantities within G/L are never reliable,
because the purpose of FI is a view on the data according to amount
but not according to quantity.
In the FI normally the Quantity is not a 'real' important field, as it
is more related to the MM area.
I hope I could be of assistance.
Regards,
Fernando

Fields not getting updated in FBL3N and FBL5N

Hi
I have introduced new fields like material number, quantity sales document number, etc in through FBL3N --> Settings --> List special fields.
Also i added one more field in 'sort key' as sales document number. I updated sort key in customer master and GL master (i.e. reconcliation account of customer A/c)
But inspite of doing this, i can see those fields after change layout. But these fields are still empty. I do not know why its empty.
When i changed sort key to sales document number, sales delivery number is coming instead of sales document number in assignment field.
Please help

Dear Meenakshi,
Even though there are various fields available in FBL5N or FBL3N, all the fields are not updated for all the transactions. Based on transaction to transaction, fields get updated and mostly these are SAP standards. If you want certain fields, you need to develop Z reports accordingly.
For example when GR is posted, system does not update PO number in Purchase order field. But alternatively it is updated in REFKEY1 field. Similarly when billing is done, it does not update material code in FI tables so it does not appear in FBL5N.
Regarding Sort key, check with your SD consultant, what copy control it is used. In finance, assignment field is updated based on copy control used in SD.
Regards,
Niraj

Quantity field not getting displayed

Hi,
I am using Adaptived RFC Model to get Sales Order Data from SAP. The Sales Order BAPI that i am using is
BAPI_SALESORDER_DETAIL. I have mapped the SALESORDER table(SALESOPRDER Model node) to the TABLE UI element in my WebDynpro Application.
The problem i am facing is that while all the fields get displayed the Quantity value is not getting displayed in the appropriate column. I have checked the mapping and everything seems to be fine.
Also when i create a separate value node for the table and fill the value node from the model node the quantity value gets displayed then.
Please suggest what can be the possible cause for this.
Regards
Sidharth
Can you please

Hi,
As far as I understand you display output parameters of BAPI, so check to following things:
1. After calling BAPI model method call invalidate on context node to update the values (e.g. outputNode.invalidaet() )
2. Check that you dispaly output parameters and not input parameters of the table. (e.g. You have Quantity and QuantityOutput node so connect you table field to QuantityOutput)
Hope it helps.
Victor.

BAPI_MATERIAL_SAVEDATA-Tax fields not getting updated.

Hi Everyone,
    I'm trying to create material through this BAPI -"BAPI_MATERIAL_SAVEDATA"
I'm also passing the tax information related to it in the TAXCLASSIFICATIONS table.I'm populating the fields in the format as I have shown below in the code.Everything is working fine ,material is getting created except the tax information in the material not being affected against what I'm passing.I'm not sure though what does the tax_ind field does in the TAXCLASSIFICATIONS table.
Specifically,The country CA has different type codes mentioned as CATX1,CATX2,CATX3.But the values are getting updated only for the CATX1 category code.So after the creation, All the countries have their taxes classified except and CATX2 and CATX3 remain blank-no entry at all.
Kindly let me know if you have a clue regarding this.
FUNCTION Z_CREATE_MATERIAL.
*"*"Local Interface:
*" IMPORTING
*"     VALUE(MATERIAL) TYPE MARA-MATNR OPTIONAL
*"     VALUE(MATDESC) TYPE MAKT-MAKTX OPTIONAL
*"     VALUE(KBETR) TYPE BDCDATA-FVAL OPTIONAL
*"     VALUE(MATCOST) TYPE STPRS_BAPI OPTIONAL
*" EXPORTING
*"     VALUE(MESSAGE) TYPE STRING
DATA: BAPI_HEAD   LIKE BAPIMATHEAD,
        BAPI_MAKT   LIKE BAPI_MAKT,    "Material Description
        BAPI_MARA1 LIKE BAPI_MARA,    "Client Data
        BAPI_MARAX LIKE BAPI_MARAX,
        BAPI_MARC1 LIKE BAPI_MARC,    "Plant View
        BAPI_MARCX LIKE BAPI_MARCX,
        BAPI_MBEW1 LIKE BAPI_MBEW,    "Accounting View
        BAPI_MBEWX LIKE BAPI_MBEWX,
        BAPI_RETURN LIKE BAPIRET2,
        bapi_sales like BAPI_MVKE,
        bapi_salesx like BAPI_MVKEX,
        bapi_mard like BAPI_mard,
        bapi_mardx like BAPI_mardx.
DATA: BEGIN OF INT_MAKT OCCURS 100.
          INCLUDE STRUCTURE BAPI_MAKT.
DATA: END OF INT_MAKT.
DATA: BEGIN OF L_T_MARM OCCURS 100.
          INCLUDE STRUCTURE   BAPI_MARM.
DATA: END OF L_T_MARM.
DATA: BEGIN OF L_T_MARMx OCCURS 100.
          INCLUDE STRUCTURE   BAPI_MARMx.
DATA: END OF L_T_MARMx.
DATA: BEGIN OF L_T_tax OCCURS 100.
          INCLUDE STRUCTURE   BAPI_MLAN.
DATA: END OF L_T_tax.
*for plant 3800
* Header
BAPI_HEAD-MATERIAL        = MATERIAL.
BAPI_HEAD-IND_SECTOR      = '1'.
BAPI_HEAD-MATL_TYPE       = 'HAWA'.
BAPI_HEAD-BASIC_VIEW      = 'X'.
bapi_head-SALES_VIEW = 'X'.
bapi_head-PURCHASE_VIEW = 'X'.
BAPI_HEAD-ACCOUNT_VIEW    = 'X'.
bapi_head-cost_view = 'X'.
bapi_head-mrp_view = 'X'.
* Client Data - Basic
BAPI_MARA1-BASE_UOM       = 'EA'.
BAPI_MARA1-UNIT_OF_WT     = 'LB'.
BAPI_MARA1-ALLWD_VOL = '10'.
BAPI_MARA1-PACK_VO_UN = 'CCM'.
bapi_marax-ALLWD_VOL = 'X'.
bapi_marax-PACK_VO_UN = 'X'.
BAPI_MARA1-DIVISION       = '00'.
BAPI_MARA1-NET_WEIGHT     = '1'.
BAPI_MARA1-MATL_GROUP = '002'.
BAPI_MARa1-TRANS_GRP = '0001'.
bapi_mara1-prod_hier = '001700010000000110'.
BAPI_MARAX-trans_grp    = 'X'.
bapi_marax-prod_hier = 'X'.
BAPI_MARAX-BASE_UOM   = 'X'.
BAPI_MARAX-UNIT_OF_WT   = 'X'.
BAPI_MARAX-DIVISION    = 'X'.
BAPI_MARAX-MATL_GROUP    = 'X'.
BAPI_MARAX-NET_WEIGHT    = 'X'.
bapi_mara1-ITEM_CAT = 'NORM'.
BAPI_MARAX-item_cat    = 'X'.
*Units of measure - Gross weight populate
L_T_MARM-ALT_UNIT = 'EA'.
L_T_MARM-ALT_UNIT_ISO = 'EA'.
L_T_MARM-GROSS_WT = '1'.
L_T_MARM-UNIT_OF_WT = 'LB'.
L_T_MARM-VOLUME = '100'.
L_T_MARM-VOLUMEUNIT = 'CCM'.
L_T_MARMX-VOLUME = 'X'.
L_T_MARMX-VOLUMEUNIT = 'X'.
APPEND L_T_MARM.
L_T_MARMX-UNIT_OF_WT = 'X'.
L_T_MARMX-GROSS_WT = 'X'.
L_T_MARMX-ALT_UNIT = 'EA'.
L_T_MARMX-ALT_UNIT_ISO = 'EA'.
APPEND L_T_MARMX.
*Tax Classification
L_T_tax-DEPCOUNTRY = 'US'.
L_T_tax-DEPCOUNTRY_ISO = 'US'.
L_T_tax-TAX_TYPE_1 = 'UTXJ'.
L_T_tax-TAXCLASS_1 = '1'.
   append l_t_tax.
L_T_tax-DEPCOUNTRY = 'DE'.
L_T_tax-DEPCOUNTRY_ISO = 'DE'.
L_T_tax-TAX_TYPE_1 = 'MWST'.
L_T_tax-TAXCLASS_1 = '1'.
append l_t_tax.
L_T_tax-DEPCOUNTRY = 'CA'.
L_T_tax-DEPCOUNTRY_ISO = 'CA'.
L_T_tax-TAX_TYPE_1 = 'CTX1'.
L_T_tax-TAXCLASS_1 = '0'.
append l_t_tax.
L_T_tax-DEPCOUNTRY = 'CA'.
L_T_tax-DEPCOUNTRY_ISO = 'CA'.
L_T_tax-TAX_TYPE_1 = 'CTX2'.
L_T_tax-TAXCLASS_1 = '0'.
   append l_t_tax.
L_T_tax-DEPCOUNTRY = 'CA'.
L_T_tax-DEPCOUNTRY_ISO = 'CA'.
L_T_tax-TAX_TYPE_1 = 'CTX3'.
L_T_tax-TAXCLASS_1 = '0'.
    append l_t_tax.
L_T_tax-DEPCOUNTRY = 'AU'.
L_T_tax-DEPCOUNTRY_ISO = 'AU'.
L_T_tax-TAX_TYPE_1 = 'ATX1'.
L_T_tax-TAXCLASS_1 = '0'.
   append l_t_tax.
L_T_tax-DEPCOUNTRY = 'NZ'.
L_T_tax-DEPCOUNTRY_ISO = 'NZ'.
L_T_tax-TAX_TYPE_1 = 'NZTX'.
L_T_tax-TAXCLASS_1 = '0'.
   append l_t_tax.
* Material Description
REFRESH INT_MAKT.
INT_MAKT-LANGU           = 'EN'.
INT_MAKT-MATL_DESC       = MATDESC.
APPEND INT_MAKT.
* Plant - Purchasing
BAPI_MARC1-PLANT      = '3800'.
BAPI_MARC1-PUR_GROUP = '100'.
BAPI_MARCX-PLANT      = '3800'.
BAPI_MARC1-ISS_ST_LOC = '0001'.
BAPI_MARC1-SLOC_EXPRC = '0001'.
BAPI_MARCx-PUR_GROUP      = 'X'.
BAPI_MARCX-ISS_ST_LOC = 'X'.
BAPI_MARCX-SLOC_EXPRC = 'X'.
BAPI_MARC1-LOADINGGRP = '0002'.
BAPI_MARCx-LOADINGGRP = 'X'.
BAPI_MARC1-PLND_DELRY = '1'.
BAPI_MARC1-MRP_TYPE = 'PD'.
BAPI_MARC1-MRP_CTRLER = '001'.
BAPI_MARC1-SM_KEY = '001'.
BAPI_MARC1-LOTSIZEKEY = 'TB'.
BAPI_MARC1-PROC_TYPE = 'F'.
BAPI_MARCx-PLND_DELRY      = 'X'.
BAPI_MARCx-MRP_TYPE      = 'X'.
BAPI_MARCx-MRP_CTRLER      = 'X'.
BAPI_MARCx-SM_KEY      = 'X'.
BAPI_MARCx-LOTSIZEKEY      = 'X'.
BAPI_MARCx-proc_type = 'X'.
BAPI_MARC1-MRP_GROUP = '0030'.
BAPI_MARCx-MRP_GROUP = 'X'.
*Sales View
bapi_sales-SALES_ORG = '3020'.
bapi_sales-DISTR_CHAN = '14'.
bapi_sales-DELYG_PLNT = '3800'.
BAPI_SALES-ITEM_CAT = 'NORM'.
bapi_salesx-ITEM_CAT = 'X'.
bapi_salesx-Delyg_plnt = 'X'.
bapi_salesx-sales_org = '3020'.
bapi_salesx-DISTR_CHAN = '14'.
bapi_sales-MATL_STATS = '1'.
bapi_salesx-MATL_STATS = 'X'.
* Accounting
BAPI_MBEW1-VAL_AREA   = '3800'.
BAPI_MBEW1-VAL_CLASS   = '3100'.
BAPI_MBEW1-STD_PRICE = matcost.
BAPI_MBEW1-PRICE_CTRL = 'V'.
bapi_mbew1-PRICE_UNIT = '1'.
BAPI_MBEWX-VAL_AREA   = '3800'.
BAPI_MBEWX-PRICE_CTRL = 'X'.
BAPI_MBEWx-STD_PRICE = 'X'.
BAPI_MBEWX-VAL_CLASS   = 'X'.
bapi_mbewx-price_unit = 'X'.
bapi_mard-plant = '3800'.
bapi_mard-stge_loc = '0001'.
bapi_mardx-plant = '3800'.
bapi_mardx-stge_loc = '0001'.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
    EXPORTING
      HEADDATA                   = BAPI_HEAD
     CLIENTDATA                 = BAPI_MARA1
     CLIENTDATAX                = BAPI_MARAX
     PLANTDATA                  = BAPI_MARC1
     PLANTDATAX                 = BAPI_MARCX
*   FORECASTPARAMETERS         =
*   FORECASTPARAMETERSX        =
*   PLANNINGDATA               =
*   PLANNINGDATAX              =
   STORAGELOCATIONDATA        = bapi_mard
   STORAGELOCATIONDATAX       = bapi_mardx
     VALUATIONDATA              = BAPI_MBEW1
     VALUATIONDATAX             = BAPI_MBEWX
*   WAREHOUSENUMBERDATA        =
*   WAREHOUSENUMBERDATAX       =
     SALESDATA                  = bapi_sales
     SALESDATAX                 = bapi_salesx
*   STORAGETYPEDATA            =
*   STORAGETYPEDATAX           =
*   FLAG_ONLINE                = ' '
*   FLAG_CAD_CALL              = ' '
*   NO_DEQUEUE                 = ' '
*   NO_ROLLBACK_WORK           = ' '
   IMPORTING
     RETURN                     = BAPI_RETURN
   TABLES
     MATERIALDESCRIPTION        = INT_MAKT
   UNITSOFMEASURE             = L_T_MARM
   UNITSOFMEASUREX            = L_T_MARMX
*   INTERNATIONALARTNOS        =
*   MATERIALLONGTEXT           =
   TAXCLASSIFICATIONS         = l_t_tax
*   RETURNMESSAGES             =
*   PRTDATA                    =
*   PRTDATAX                   =
*   EXTENSIONIN                =
*   EXTENSIONINX               =
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
Any suggestions on this one would really mean a lott of help to me.
Thanks a lot,
Archies!!

Hi James ,
I' m not sure but could you please try like this
L_T_tax-DEPCOUNTRY = 'CA'.
L_T_tax-DEPCOUNTRY_ISO = 'CA'.
L_T_tax-TAX_TYPE_1 = 'CTX1'.
L_T_tax-TAXCLASS_1 = '0'.
   L_T_tax-TAX_TYPE_2 = 'CTX2'.
L_T_tax-TAXCLASS_2 = '0'.
append l_t_tax.
Hope this helps
Caglar

Quantity fields not getting displayed in the second total row

Hi,
As per the requirement I have to display 2 total rows for an ALV report using CL_GUI_ALV_GRID. I am able to get the first total row properly using method get_subtotal(). However for the next total row only the character fields are getting displayed and the quantity fields are coming blank.
The second total row will have different values based on a formula.
Please help me out in resolving the issue.
Thanks,
Abhishek

You can provide first row as the SUBTOTAL and next row as the TOTAL.
Get one extra column on which you can do the SUBTOTAL.
Regards,
Naimesh Patel

Fields not getting updated in the database through BAPI enhancement

Hi Experts,
I have added 4 custom fields in the transaction FB60. The fields are getting displayed in vendor line item.
I have to fill these fields from an inbound idoc which uses the BAPI_ACC_DOCUMENT_POST bapi. I have implemented the BADI BADI_ACC_DOCUMENT to pass my custom fields to the bapi and it is processing correctly by adding the custom field values to the extension table that is getting passed to the standard program of the BAPI from the BADI.
But I think, I have missed to append my fields in one of the standard structures. I have added the fields in BSEG, CI_COBL( which is getting called in BAPICOBL_CI, ACCIT).
Can anybody tell me which other standard structure I should add my custom fields so that it functions properly and gets added to the BSEG table.
Regards,
Sangeeta.

Solved on own.

Foreign key fields not getting populated in datacontrol palette for EJB app

Hi,
I am quite new to ADF and EJB.I developed a jdeveloper application with JSF and EJB tiers.(I am using jdeveloper 10.1.3.5)
For database the default HR database is used.I created the entities for the EMPLOYEES and DEPARTMENTS table.
I also created a session bean and a data control for the session bean.
I am having a JSF page that receives all the details of a new Employee and insert into database (i.e persistEntity)
But the Employees constructor from the Data control palette is not populating the MANAGERID and DEPARTMENTID fields which are
the foreign key constraints for the EMPLOYEES table and hence while trying to persist the entity
with the auto populated fields an error message is thrown.
If I used ADF BC instead of EJB then i could populate all the fields including MANAGERID and DEPARTMENTID.
Is it possible to have two text fields for Manager and Department in the jsf to insert the Employee details with EJB as the Model?.
If possible how do I bind the values of these fields to the Employees entity object in EJB.
Kindly need your insights on this.
Thanks,
Guna.

Hi,
How are you using MANAGER_ID and DEPARTMENT_ID fields, are they exposed as Long (or some other numeric type), or did you map them on the entity, something like this
@ManyToOne
private Employee manager; // this by default uses the column named MANAGER_ID
@ManyToOne
private Department department; // this by default uses the column named DEPARTMENT_ID
.... If you mapped them (which is the right way), when you create an employee you should set these attributes before persisting the entity, by using employee.setManager(manager) and employee.setDepartment(department). Then, the foreign keys get populated automatically by your persistence provider (Toplink).
If you are using data controls, it is a little different process to set the department and manager, but you should take a look at this tutorial http://www.oracle.com/technology/obe/obe11jdev/ps1/ejb/ejb.html , it will hopefully answer a lot of your questions.
Pedja

Outbound Delivery IDOC not updating values from MKPF for goods receipt

hi all,
I have a question say I am generating an outbound delivery IDOC. which has fields Goods Issues & Goods Receipt date retrieve from MKPF(BUDAT).
say when i post goods issues, MKPF is updated and IDOC is gernerated with issues date taken from MKPF.
and when i tried to goods receipt, MKPf is updated and IDOC is generated but no receipt date taken from MKPF. then i check in MKPF, date is there and then once again I triggered the IDOC, receipt date comes......so my doubt is the time issues say when IDOC is triggeres, no value in MKPF...but when i check the time it is 4 mins difference from the MKPF time and the IDOC time...
and also 1 more thing for doing goods receipt, we do in different transaction and for good issue we do in Vl02n.
so bit confused.
kindly help

True , but in BKPF only Issues date are stored not the receipt date say if the document type = WE.
Please let me know is there any other options to fetch rather than MKPF.
because at the time of IDOC generation, there is not entries in MKPF. I tried to do using WAIT UP TO 50 seconds , even that didnt work.
Please guide me
thanks

Quantity field not getting update in PCA document for Goods Receipt

Similar Messages

Maybe you are looking for