Goods Movement Errror during order confirmation

Hi Experts,
I have confirmed one production order for finished good. Its status now is REL  CNF  DLV  PRC  GMPS MANC SETC.
Finsihed good has 2 HALBs. Storage loctaion for FG is XX1 and for HALB is YY1.  Backflushing for FG is active.
I am trying to cancel this confirmation using CO13.But while doing so I get error as " Current Order Status XXXXXX does not allow goods withdrawal".
Could you please explain where things are going wrong? How can I change status of a confirmed order?
Thanks

Dear
If  your production Order is already DLV , then this message will pop up because you are tring to cancel the operation confirmation where backflash is active .In that case . you need to cancel the Materials Documents throgh MBST or MIGO, then you can cancel confirmation .
I would rather suggest you to chekc the COGI error frist and then go ahead with cancelation of material sdocuments .
Couple chels can be done :
1.Check wether the stock is not IV or PGI if it MTO order
2.Check wether you have make Backflah active in MRP views of the material
3.Check the Operation where you did the operation confirmation wether Auto GR active in Operaton control key as well as Back Flash mark in Work Cnetre Basic View
investigate above points before canceling Materials documents in MBST/MIGO and then cancel confirmation in CO13
Try and revert
Regards
JH

Similar Messages

  • Restriction to delete goods movement data during confirmation thru CO11N

    hello all
    Please let me know how to prevent the user to delete the rows in goods movement screen during confirmation through transaction CO11N ,as users are able to confirm without goods issue by deleting that rows.
    Should we contact basis person for the same
    with regards

    Dear,
    Please refer my reply in this thread,
    https://forums.sdn.sap.com/click.jspa?searchID=16368869&messageID=6047820
    https://forums.sdn.sap.com/click.jspa?searchID=16368869&messageID=6151829
    Try using transaction variants. There is a utility called GUIXT in transaction. You can write code to add a pushbutton on the desired screen by using the GUIXT. The coding syntax is provided in the SAP application help. Use transaction SHD0 to create the variants.
    http://wiki.ittoolbox.com/index.php/Implement_a_screen_exit_to_a_standard_SAP_transaction
    Hope it will help come back if any problem.
    Regards,
    R.Brahmankar

  • Goods movement in collective order

    Hi all,
    We have ticked the indicator for 'Goods movement for collective order' in OPJH, still we are not getting required results. The goods receipt against the child order does not occur.
    Please help.
    SmanS

    Hi Dear Can u please explain..how you solved this..
    Regards
    Raghu

  • Restricting Good Receipt Unless Production Order Confirmed

    Hi
    Experts,
    I want to Restricting Good Receipt Unless Production Order Confirmed
    I am doing following thing but the error is occured.
    Use Tcode BS02 ( Customising USer status profile).
    2. Select the order type which you want to configure (eg:PP000001) and choose "Details" button.
    3. In the User status table do the following:
    a. In the status no field type"1" , status field "Sta1", short text"GR not allowed",  lowest no "1",  Highest No "2". Mark a tick in the initial stats check box.
    b.Next line, type status no field "2" ,status field "sta2", short text"Gr allowed", lowest no "2" , highest no "2".
    4. Select the STA1 line and choose details. select the "create"button.select the "GR for prod order", mark "forbidden
    radio button" and "set radio button".
    5. Select the STA2 line and choose details. Selct the "create"button. select "confirm order", mark "permitted radio button" and "set radio button". Next choose "GR for prod order" , mark "permitted radio button".
    6.Save.
    Create a prod order and check whether the required scenario is working.
    I have created user status profile as PP000001   GR
    ERROR
    First define allowed object types
    Message no. BS218
    Diagnosis
    The object types for which a status profile may be used define which business transactions are included in business transaction control.
    Procedure
    First define for which object types this status profile can be used.
    What is object type how to define?
    Thanks & Regards
    Pert

    Hi,
    Refer to the below thread which addresses the same need:
    Re: GR not allowed :BS02
    Revert if you face any issues.
    Regards,
    Vivek

  • Tick for goods movement in production order

    Hi,
    I have one query with reference to tick for goods movement in production order.
    Where it comes from as soon as i released the order.
    Is there any customized setting or it is stanadard functionality?
    Tushar

    Hi,
    I am not sure about which tick you are talking. So pls clarify exactly which check boxes you are talking in Production Order.
    If you are talking about check boxes of Goods Receipt,  GR Non valuated & Delivery Completed check boxes then those are standard SAP functionality which comes automatically at the time of creation / release of the order.
    Revert with more details in case your query is not resolved.
    Regards,
    Tejas

  • Error in Goods Movement during order confirmation

    Hi,
    I am trying to confirm a production order through CO11n,but i am getting an error in Goods Movement .
    The following message is displayed in the log -  "* Posting only possible in /11 anperiods 2008d 2008/10 in company code A100*".  Can any one guide me what should i do to confirm the order without any error in Goods Movement,
    Thanks in advance.

    Hi,
    It is advisable to correct the Goods Movement Errors in COGI in the same period (before closing the period by MM in MMPV). You cannot correct the same if the period is closed.
    Only option is you need to open the closed period in consulatation with FI and MM team members
    OR
    Delete the Error movement records in COGI and post the Goods Issue for the production order in Tcode : MB1A with movt type 261 and go inside and mention the materials which you want to issue to the order.
    Hope this will help you.
    regards
    radhak mk

  • Posting related Error during Order Confirmation

    Dear Experts,
    I am from PP forum and had to post this in FI forum as i am getting an error message during process order confirmation after the goods posting is done thro backflush "Acct. 21701300 for trans./event key BSX, postable directly" .The error explanation says "the stock account determined automatically by the system is one that is directly postable. However, this stock posting can only be made to an automatically postable account. How to solve this please help.....
    Regards,
    Sunit

    Hi
    Stock account should be 'Post automatically only'. This option should be selected in the respective GL master in FS00.
    Change the GL 21701300 to post automatically only in FS00 or assign a different stock account in config - OBYC - BSX for the respective material valuation class
    Thank You,

  • Error during Order confirmation

    Hi ,
    Can anyone tell us whether can we do confirmation if there is a material shortage.
    IF order qty is 10 and there is material shortage for one of the rawmaterials and if we are trying to do confirmation by entering Yield qty as 10. Will system allow us to do confirmation?.
    b) What is the tcode to see the Reservations against the production order?.
    Thanks.

    Can anyone tell us whether can we do confirmation if there is a material shortage.
    IF order qty is 10 and there is material shortage for one of the raw materials and if we are trying to do confirmation by entering Yield qty as 10. Will system allow us to do confirmation
    In OPk4- in general individual  entry check Tick mark is there for Goods movement on error handling log screen, and termination if incorrect good movements
    Based on this setting only, system will react, Change the setting as per your business requirment.
    What is the t code to see the Reservations against the production order?.
    You can find out the reservation no in Co02 assignment tab MB25

  • Automatic batch determination during order confirmation

    Dear experts,
    We have defined automatic batch determination using stock determination (OPJ2, for plant/order type, operation 3, check column BD).
    This works fine, only problem is that now both backflushed and non-backflushed materials get batches assigned, but for the non-backflushed we do not want this.
    Does anybody have an idea how to achieve this?
    Edited by: ton teuns on Jun 8, 2011 9:01 AM

    Dear Ton,
    As you have mentioned non-backflushed materials,it means the backflush indicator is not set in the material master or else in
    the work center or in the production order.
    So assuming the indicator is not how are you able to see these components during the order confirmation?
    So first remove the backflush indicator so that it means those components are manually issued and check these threads to
    explore more,
    Automatic batch determination during goods issue
    Regards
    Mangalraj.S

  • PPPI PI sheet to trigger HUM goods receipt and PI order confirmation

    Hi gurus,
    We're running into a problem when setting up our PI sheets.
    We're using Handling Unit Management for our finished products and would like to use the PI sheet to post both the goods receipt of handling units and the order confirmation. For now let's assume all activities and ingredients are backflushed.
    For the HUM section we've created a function module that combines transactions COWBPACK and COWBHUWE. When called by itself it works like a dream.
    For the order confirnation we've successfully used standard SAP message category PI13, but also only when called by itself.
    The problem is when we combine them:
    When combining the Z function module to contain both COCI_CONFIRM_ORDER (from the PI13 message) and our ZHUM function modules, it appears that the COCI_CONFIRM_ORDER blocks the process order so the COWBHUWE part of our function module cannot be executed. This has something to do with the way SAP handles the "commit" in the function module.
    Now, I noticed it's possible to include more than one message category in customizing for the PI sheet category (when configuring through the wizard).  The idea is then to process the messages with a background job, filtering through the message category so we do the HUM part immediately and the confirmation only at the end of the shift so they don't block each other.
    However, when I do this still only one message category is created after processing the PI sheet.
    Do you know how to create messages with multiple message categories from the same PI sheet? Or if that's not the way, is there a better way to set up this process?
    Sorry for the long text, just wanted to be precise.  Any help is, as usual, greatly appreciated.
    Kind regards,
    Elt

    Hi
    1. What is quantity of the waste material you get as by product? Do not you wan it to be handled as scrap? What is the %age of scrap you have defined in the BOM for the material? You wll have some data regarding this. Or else how do you arrive at decission that after subcontract processes the waste you are paying him, Is it umpsum basis or material quantity basis. The best way is to have a Subcontract PO, but for that even though you do not weigh the watse quanity you must be having so historical data for the waste quantity generated and the conversion of the sane to other SFG , definitely you can arrive that on a pro_rata basis. Have a Code for the waste mateial. Release Subcontract PO for SFG which is what you get back, and issue the components( waste) to subcontractor.
    Please remember your PO intially will be for Provisional quantity if you are unable to reach a fixed quantity. Amend the PO before GR as per the actual quanity for which you wish to pay the vendor.
    For the waste quanity stock updation you use 262(w/o refe to Prd order) after the FG is confirmed.
    Material price updation happens cirrectly in this process.
    2. You can pay the vendor as you wish by by this process but what about the price updation for the ordered material SFG. When you can receive by product in separate Txn againt FG then why can not you follow the proces no. 1?
    3. I would not liketo suggest 3 rd option as that becomes much comlicated for a simple operation.
    Best Regards

  • Goods movement from Maintenance order

    Hi Experts
    I have the following scenario,
    I have a component ( with Material master) in the maintenance order  and i use Item category N to trigger  a Purchase requisition. The Pur Req is converted to Purchase Order and then the GR is done directly to the order .
    Now i have not used this Component  and want to make a goods movement to place it in stock. So the requirement is to move the material from Maintenance Order to the Storage location .
    How and which movement type can i use to do this ?
    Please help
    KK

    Hi,
    Click the below link for more information
    http://sap-img.com/plant/in-pm-how-to-return-material-backflushed.htm
    regards,
    Venkatesan Anandan

  • Error in posting goods movement with production order

    Hi all,
        I have a custom program that post goods movement using function  'Bapi_Goodsmvt_Create'.
    The material passed into is a FERT material along with movement type 101,  goods-movement code = 02', movement indicator = 'F'.    This function gives an error :
    'E M7 022 Order quantity exceeded by 21.390 cse : item xxxxxx, plant xx prod order xxxxx'.
    The material is a take weight material.   In production order, it came up to 910lb for total weight.
    In goods receiving this material, i have changed the material from 910lb to 1016.950.
    This is where the error came in.  Note: 21.39 cases = 106.95 lb.
    We had such take weight material worked before.
    Can anyone pls suggestion what can be done about this ?
    Thanks
    Joyce

    Hi Dario,
        Because the finised material is a take weight product, it should be ok unless there is a tolerance in the takeweight.   Also the production order is generated from 2 sales orders.
       To migo a production order, would it be A01 Goods Receipt and  R08 for prod order ?
    Thank you.
    Joyce

  • DOCUMENTED  GOODS MOVEMENT  FOR COLLECTIVE ORDER

    Hi Guru's
    In  the  4.6C version 
    If i got to Production order from transaction code CO03 , Read the collective order , highlight the toplevel item and ''GOTO'' in the menu bar and select Documented goods movement , the display shows the Top level order AND the Sub-Assemblies.
    ( sub-assemblies goods movement with main assembly  can be seen in the single screen)
    In the ECC 6.0 Version
    If i got to Production order from transaction code CO03 , Read the collective order , highlight the toplevel item and ''GOTO'' in the menu bar and select Documented goods movement , the display shows the Top level order only.
    To see the Goods Movement in the Sub-Assemblies  you have to go to each production order individually.
    can this be changed in ECC 6.0  exactly to that seen in 4.6c version .
    pls give me your valuable inputs at the earliest .
    Thanks for your help.
    Regards
    satish k

    Hi satish,
    In collective order struture ,Automatic goods movement will be happened between toplevel & lower level.
    Please check with "coll order goods mvt" settings for order type at OPJH For ECC 6.0 version.
    Please also check with cost analysis for Goods movement.
    Regards
    Pradeep

  • Goods Movement for Process Order

    Hi PP Experts.
    Is it possible to take goods movement in TECO process order directly.
    is there any other possibility for take goods movements in TECO process order?

    Hi,
    After TECO you can't do Goods Movements. For carrying out , GOOds Movements you need to revoke TECO in process order as following :
    GO to COR2-> Process Order Menu->Functions->Restrict Processing-->Revoke Technical Completion and Save.
    After revoking TECO , You can carry out Goods Movements.
    Hope this helps.
    Revert if any doubt.
    Award points if useful.
    Regards,
    Tejas

  • Option to park and post in goods movement against prod order

    Hi all,
    The requirement is to park the actual quantities data for goods movement against a production order. The actual quantities entered will be checked by authorized person and then it will be posted. Is there any provision to do so either in MIGO or some other transaction.
    I have already tried ' hold' option in MIGO but it holds the data temporarily. It gets vanished after I come out of the transaction or log off.
    Regards,
    Yogesh

    1. First check if you have the showoveriew on
    2. Afer  you enter the vlaues in the MIGO- dont check the OK button
    3. once when you have done everythign - click the HOld button
    4. now a hold document pop up will be coming with your PO no
    5. Now save this document and
    6. IN the overview window you can see the held document
    7. now you can selelct the held document verify - enter the check box for the ok button and then post it.
    it works fine for me
    let meknow your feedback
    reg
    dsk

Maybe you are looking for