Got error while recover controlfile with rman

Dear all,
My controlfile and some datafiles were crash and i tried to recover their with rman as the following step:
1. startup nomount;
2. restore controlfile from autobackup;
3. alter database mount;
4. restore database;
5.SELECT archivelog_change#-1 FROM v$database;
ARCHIVELOG_CHANGE#-1
1301671
6.run {
set until scn 1301671;
recover database;
executing command: SET until clause
Starting recover at 01 พ.ย. 2006
using channel ORA_DISK_1
starting media recovery
media recovery failed
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 11/01/2006 15:38:01
ORA-00283: recovery session canceled due to errors
RMAN-11003: failure during parse/execution of SQL statement: alter database reco
ver if needed
start until change 1301671 using backup controlfile
ORA-00283: recovery session canceled due to errors
ORA-01190: controlfile or data file 1 is from before the last RESETLOGS
ORA-01110: data file 1: 'C:\ORACLE\ORADATA\DB01\SYSTEM01.DBF'
What happend? Please give me some advise.
Thaks for advance !
Chara

After every resetlogs you have to take fresh backup.
It seems you have opened your database in resetlogs and your backup is prior to this resetlogs.So the controlfile is showing inconsistance with the other datafiles.

Similar Messages

  • Error while recovering datafile using rman

    Hi Friends,
    I was trying to recover the deleted datafile 5 , but getting the following error... ( oracle 10g , database archive log mode )
    RMAN> startup
    database is already started
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of startup command at 02/28/2012 10:54:30
    ORA-01157: cannot identify/lock data file 5 - see DBWR trace file
    ORA-01110: data file 5: 'F:\ORACLE\ORADATA\DEMO\DEM01.DBF'
    RMAN> restore datafile 5;
    Starting restore at 28-FEB-12
    using target database control file instead of recovery catalog
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=156 devtype=DISK
    released channel: ORA_DISK_1
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of restore command at 02/28/2012 10:54:49
    ORA-19554: error allocating device, device type: SBT_TAPE, device name:
    ORA-27211: Failed to load Media Management Library
    RMAN>
    Whats the way out...

    RMAN> show all;
    RMAN configuration parameters are:
    CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
    CONFIGURE BACKUP OPTIMIZATION ON;
    CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
    CONFIGURE CONTROLFILE AUTOBACKUP ON;
    CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
    CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE SBT_TAPE TO '%F'; # defa
    ult
    CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
    CONFIGURE DEVICE TYPE SBT_TAPE PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
    CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
    CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
    CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
    CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
    CONFIGURE CHANNEL DEVICE TYPE DISK MAXPIECESIZE 100 M;
    CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE' MAXPIECESIZE 100 M;
    CONFIGURE MAXSETSIZE TO UNLIMITED; # default
    CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
    CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
    CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
    CONFIGURE SNAPSHOT CONTROLFILE NAME TO 'G:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\S
    NCFDEMO.ORA'; # default

  • Got Error While Compiling Packages with TOAD (URGENT)

    Dear Experts,
    Please help me to resolve this erroe this is very criticla.
    ORA-20000: You have insufficient privileges for an objects in this schema
    ORA-06512: at "SYS.DBMS.UTILITY" LINE 422
    ORA-06512: Line 1

    You should be connected to the user that owns the packages, or SYS.

  • HT201442 I am got error while trying to restore,, but i just only error file with 3194. I try many step by install lastest version and fix host file, but still fail. Anybody can give me any key point to solve this problem? Thank you

    I am got error while trying to restore,, but i just only error file with 3194. I try many step by install lastest version and fix host file, but still fail. Anybody can give me any key point to solve this problem? Thank you

    Error 3194:
    This device isn't eligible for the requested build
    It means that Apple has stopped signing the version of iOS that you have, try downloading the latest iOS version, then try Restore again.

  • Error while Test Connection with Connector

    hi all:
         there is an error while  Test Connection with Connector , I also test it through sys administration->sys configuration->
    suport -> sap transaction, I got all errors, I put these two errors as folows, could you please tell me how to sovle it
    ***************ERROR 1 while *error while Test Connection with Connector ******************************************************
    Test Details:
    The test consists of the following steps:
    1. Retrieve the default alias of the system
    2. Check the connection to the backend application using the connector defined in this
    system object
      Results
    Retrieval of default alias successful
    Connection failed. Make sure that Single Sign-On is configured correctly
    ************error sys administration->sys configuration-> suport -> sap transaction        ********************** 1.5 #0025B3E02892006100000A0800001798000487530FB0122E#1274690722265#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt
    .runtime#guodongdong#47472##n/a##690347f0670e11df98cc0025b3e02892#SAPEngine_Application_Thread[impl:3]
    9##0#0#Error##Java###04:4524/05/10_0077_6087550
    [EXCEPTION]
    #1#com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Application URL
    &\#39;:///sap(ZT1KVXBWektldldTeV9QQXBXRjNaWTRBLS1OZmRvZzBRWWY2QmN0WThNUmgqdUlRLS0=)/bc/gui/sap/its/webgui&\#39; is not valid!
    Please check the protocol and host entries for system &\#39;sapdev&\#39;.
         at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass
    (AbstractIntegratorComponent.java:123)
         at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
         at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
         at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:523)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:412)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process
    (ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

    Hi,
    As per this part of the trace:
    Exception in SAP Application Integrator occured: Application URL &\#39;:///sap(ZT1KVXBWektldldTeV9QQXBXRjNaWTRBLS1OZmRvZzBRWWY2QmN0WThNUmgqdUlRLS0=)/bc/gui/sap/its/webgui&\#39; is not valid! Please check the protocol and host entries for system &\#39;sapdev&\#39;. at ...
    You can clearly see that the system object 'sapdev' is not configured correctly/at all - you are trying to launch transaction iView
    (WEBGUI) and in order to do so you should configure the 'internet transaction server' category of the system  object
    with the hostname of the ITS server.
    Generally the template is
    <System.Access.ITS.protocol>://<System.Access.ITS.hostname>/sap<ESID>/bc/gui/sap/its/webgui?\....
    So that's why you got
    Please check the protocol and host entries for system ..

  • VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction id in results:

    Subject: VSTS loadtest error while running Loadtest with Runsettings as  No of test iterations ,  ERROR is :  could not read result repository: unknown transaction
    id in results:
    Hello All,
    I am facing the following error while running a loadtest (when i choose the scenario to be executed for No of test iterations). But the same loadtest with the Run duration for X minutes is running fine without any issues. 
    Any suggestions on the issue i am facing
    error is :
    could not read result repository: unknown transaction id in results:
    or
    could not read result repository: unknown request id in results: 
    Thanks
    Satish

    Hi Kotapati,
    >>Subject: VSTS loadtest error while running Loadtest with Runsettings as  No of test iterations ,  ERROR is :  could not read result repository: unknown transaction
    id in results:
    According to your description, you mean that when you run your load test using the Test Iterations way and then get the error message, am I right?
    If yes, please you try to close the VS, and then open this VS again. Then clean your load test project/solution and then re-build it, run your load test again check this issue again.
    In addition, I suggest you could try to create a new load test and then run it using Test Iterations way check if you get the issue for the specified load test or all load tests.
    If possible, I suggest you could share me simple load test for us so that we will further help you.
    You could upload your load test to OneDrive and then copy link here.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Hi, i just try to update my 3g in itunes unfortunatly it got error while updating it asked me to restore update but unable to restore it , now my 3g i locked and on screen it displying usb symbol connect to itunes ,please help me regarding this

    hi, i just try to update my 3g in itunes unfortunatly it got error while updating it asked me to restore update but unable to restore it , now my 3g i locked and on screen it displying usb symbol connect to itunes ,please help me regarding this

    I suspect your error was 1015, not 1051. This usually involves a jailbroken iPhone, use Google to find your solution.

  • Licence Error while Using nqcmd with Analytics Web DSN

    Hi,
    While running nqcmd with Analytics Web DSN i am getting a DataDirect error, stating that you do not have appropriate licence to run ODBC Data Direct.
    I am getting this on Linux box but while running the same on Windows their is no such error.
    Have any one of you got such kind of stuff. I am using OBIEE which Oracle provides on her website for free for development purpose.
    Please help.
    Edited by: RKK on Oct 3, 2011 10:01 PM

    Hi,
    kindly Refer
    https://forums.oracle.com/forums/thread.jspa?messageID=2289534&#2289534
    Thanks
    Deva

  • Error while making iview with visual composer

    I am trying to make an iview usign visual composer.
    In the document that i have for making the iview , it says that when you have the bapi list you need to drag and drop the bapi to the empty iview pane . When i do so it gives me the following error ...
    "Portal request failed
    (com/sap/mdi/ObjectFactory)"
    What do i do ?
    Would appreciate a prompt help!
    thanks again for making me move ahead
    I had a conversation with a parson on the forum named Venkat . I am posting the same for other people in the forum to understand what exactly is my problem and how much have we explored .
    Regards
    Deepak Singh
    Hi Venkat ,
    I tried to do so research on the problem and it is being talked about in a thread on the forum . They ask to refer to the sap note 765461 to resolve the mdi reference . In the note they ask you to refer the installation guide of the installed version of EP . I have EP 6.0 SP2 . The installation guide says the following ...
    7.1.2 Adding References
    To enable some of the features in the portal environment, add references to reference file.
    To add a reference:
    1. With a text editor, open the file:
    Windows: <installation drive>:\usr\sap\<SAP J2EE instance name>\j2ee\<instance
    number>\cluster\state\services\file\work\managers\reference.txt
    Unix: /usr/sap/<SAP J2EE instance name>/j2ee/j2ee_<instance number>/
    cluster/state/services/file/work/managers/reference.txt
    2. Look for the line:
    reference service:eisconnector library:jco
    3. After the line mentioned in previous step, add the following in a new line:
    reference service:eisconnector library:com.sap.mdi
    4. Save your changes and close the file.
    5. Delete the file:
    Windows: <installation drive>:\usr\sap\<SAP J2EE instance name>\j2ee\<instance
    number>\cluster\state\services\file\work\managers.bin
    Unix: /usr/sap/<SAP J2EE instance name>/j2ee/j2ee_<instance number>/
    cluster/state/services/file/work/managers.bin
    6. Restart the SAP J2EE Engine. See Starting the SAP J2EE Engine [Page 60].
    7. Restart the SAP J2EE Engine again.
    I did the same ....but now my server is not starting . By chance i didn't keep a bakup of the file which they asked me to delete .
    Now what do i do ?
    I think i am stuck up badly here .
    EVERYBODY IN THE FORUM PLEASE HELP
    I am not sure how a thing that is mentioned in the installation guide cannot work !
    Regards
    Deepak Singh
    Deepak,
    It is not that bad. By deleting you are recreating that managers.bin file during startup based on the reference.txt and library.txt (recollecting from my memory). This could also happen if there is a typo or some special characters in the reference.txt
    I don't know what J2EE patch you are at, but after PL22 you can actually add the reference using the "add reference" command from the administrator console.
    could you please send the error you are getting? To revert back the simplest thing is removing the line you have added and restart.
    Hope this helps.
    -Venkat Malempati
    Note: Please reward points if your problem is solved or useful.
    Venkat ,
    I am using J2EE engine 6.20 SP2 .I tried to get the server started by the following two methods
    1) I removed my entry in the reference.txt file and then start the engine by running go.bat from the required path .
    2) I got the original file managers.bin which i deleted and then placed in the required path and restarted the server
    Both the options didn't work .
    I am not getting any error when i restart the server. When i run the batch file go.bat it starts the console and shows me the various managers loading . After it shows the Clustermanager loading , it stops and gets stuck .
    Not sure what should i do now .Is reinstallation the only solution ?
    Is there a solution from the administrator console ?
    Regards
    Deepak Singh
    Deepak,
    No you don't need to re-install. Try the following.
    1. First start the state controller by runing go.bat in the following directory.
    /usr/sap/xxx/j2ee/cluster/state/go.bat
    You get the message waiting for cluster manager.
    2. start the server in a different window
    /usr/sap/xxx/j2ee/cluster/server/go.bat
    You get the message waiting for cluster manager
    3. Start the dispatcher
    /usr/sap/xxx/j2ee/cluster/dispatcher/go.bat
    Please let me the know the error messages.
    You can chat with me between 10:00 - 11:00 PM US EST.
    Regards
    -Venkat Malempati

    People ,
       I tried to do what venkat suggested . Infact I had mailed him the snapshot of the screen when i start the state controller as he suggested . For other people in the forum this is what is happening . When i start the state controller it displays an error and then the window closes immediately . I have managed the screen shots somehow and in those i could find two messeges in the begining and the end which could be useful for debugging the problem ...they are
    1) [DBMS]: ID3004:DB file header do not match exception .
    com.inqmy.services.dbms.server.interfaces.DatabaseException: Error while opening database ...
    2) ID000544: Error statrting service dbms. DBMS service not started properly due to: Errro while opening database
    [Framework -> criticalShutdown] Service dbms startup error !
    After the state controller window closes i run the server in a different window and i get a message waiting for the cluster manager as suggested . Now i start the dispatcher and i get the same messege there as well ie waiting for the cluster manager .
    What is to be done now . Is this information sufficient to suggest me something ? Please let me know if you require any other information .
    Regards
    Deepak singh

  • Error while executing Initialize with Data Transfer for 0FI_GL_10

    Hello All,
    Post Pre prod refresh, our timestamp for the datasource 0FI_GL_10 got reset. Due to which our deltas did not bring any records to the BW system.
    First we did an Initialize without data transfer for all the BW related datasources. The deltas were then set properly for all datasources except 0FI_GL_10.
    We then raised a message to SAP and they suggested to run the 'Initialize with data transfer' for 0FI_GL_10 so that the timestamp is set and accordingly the deltas are fixed.
    The issue now is we are getting the following error message while running INIT with data transfer.
    Job terminated in source system --> Request set to red
    Message no. RSM078
    We have copied the data till July 1st week of 2011.
    Please advice. The issue is very critical.
    Thanks & Regards
    Sneha

    Hi Arvind
    Thanks for your inputs.
    Please find below the details of the short dump.
    Runtime Errors         DBIF_RSQL_SQL_ERROR
    Exception              CX_SY_OPEN_SQL_DB
    Date and Time          09/07/2011 11:25:32
    Short text
         SQL error in the database when accessing a table.
    What can you do?
         Note which actions and input led to the error.
         For further help in handling the problem, contact your SAP administrator
         You can use the ABAP dump analysis transaction ST22 to view and manage
         termination messages, in particular for long term reference.
    How to correct the error
         Database error text........: "ORA-01652: unable to extend temp segment by 128
          in tablespace PSAPTEMP"
         Internal call code.........: "[RSQL/FTCH/FAGLFLEXT ]"
         Please check the entries in the system log (Transaction SM21).
         If the error occures in a non-modified SAP program, you may be able to
         find an interim solution in an SAP Note.
         If you have access to SAP Notes, carry out a search with the following
         keywords:
         "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
    Information on where terminated
        Termination occurred in the ABAP program "GP_GLX_FAGLFLEXT" - in
         "FETCH_TO_ISTRUCTURE".
        The main program was "SBIE0001 ".
        In the source code you have the termination point in line 903
        of the (Include) program "GP_GLX_FAGLFLEXT".
        The program "GP_GLX_FAGLFLEXT" was started as a background job.
        Job Name....... "BIREQU_4N3PZQ12IA0X0PYGEA85IG39S"
        Job Initiator.. "BIWREMOTE"
        Job Number..... 11203300
        The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
        procedure "FETCH_TO_ISTRUCTURE" "(FORM)", but it was neither handled locally
         nor declared
        in the RAISING clause of its signature.
        The procedure is in program "GP_GLX_FAGLFLEXT "; its source code begins in line
        840 of the (Include program "GP_GLX_FAGLFLEXT ".

  • Error while taking backup  through RMAN in 10g XE

    While taking backup through RMAN in XE instance , an error comes out.
    The contents of oxe_backup_current file is as below :
    XE Backup Log
    Recovery Manager: Release 10.2.0.1.0 - Production on Wed Jul 6 15:49:51 2011
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    connected to target database: XE (DBID=2635631092)
    RMAN>
    echo set on
    RMAN> shutdown immediate;
    using target database control file instead of recovery catalog
    database closed
    database dismounted
    Oracle instance shut down
    RMAN> startup mount;
    connected to target database (not started)
    Oracle instance started
    database mounted
    Total System Global Area     805306368 bytes
    Fixed Size                     1261444 bytes
    Variable Size                209715324 bytes
    Database Buffers             591396864 bytes
    Redo Buffers                   2932736 bytes
    RMAN> configure retention policy to redundancy 2;
    old RMAN configuration parameters:
    CONFIGURE RETENTION POLICY TO REDUNDANCY 2;
    new RMAN configuration parameters:
    CONFIGURE RETENTION POLICY TO REDUNDANCY 2;
    new RMAN configuration parameters are successfully stored
    RMAN> configure controlfile autobackup format for device type disk clear;
    RMAN configuration parameters are successfully reset to default value
    RMAN> configure controlfile autobackup on;
    old RMAN configuration parameters:
    CONFIGURE CONTROLFILE AUTOBACKUP OFF;
    new RMAN configuration parameters:
    CONFIGURE CONTROLFILE AUTOBACKUP ON;
    new RMAN configuration parameters are successfully stored
    RMAN> sql "create pfile=''/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/dbs/spfile2init.ora'' from spfile";
    *sql statement: create pfile=''/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/dbs/spfile2init.ora'' from spfile*
    *RMAN-00571: ===========================================================*
    *RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============*
    *RMAN-00571: ===========================================================*
    *RMAN-03009: failure of sql command on default channel at 07/06/2011 15:50:57*
    *RMAN-11003: failure during parse/execution of SQL statement: create pfile='/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/dbs/spfile2init.ora' from spfile*
    *ORA-27086: unable to lock file - already in use*
    *Linux Error: 11: Resource temporarily unavailable*
    Additional information: 8
    Additional information: 16476
    RMAN> backup as backupset device type disk database;
    Starting backup at 06-JUL-11
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=102 devtype=DISK
    channel ORA_DISK_1: starting full datafile backupset
    channel ORA_DISK_1: specifying datafile(s) in backupset
    input datafile fno=00003 name=/usr/lib/oracle/xe/oradata/XE/sysaux.dbf
    input datafile fno=00005 name=/usr/lib/oracle/xe/oradata/XE/ftress_data_log01.dbf
    input datafile fno=00006 name=/usr/lib/oracle/xe/oradata/XE/ftress_data_lrg01.dbf
    input datafile fno=00001 name=/usr/lib/oracle/xe/oradata/XE/system.dbf
    input datafile fno=00009 name=/usr/lib/oracle/xe/oradata/XE/ftress_indx_log01.dbf
    input datafile fno=00010 name=/usr/lib/oracle/xe/oradata/XE/ftress_indx_lrg01.dbf
    input datafile fno=00002 name=/usr/lib/oracle/xe/oradata/XE/undo.dbf
    input datafile fno=00004 name=/usr/lib/oracle/xe/oradata/XE/users.dbf
    input datafile fno=00008 name=/usr/lib/oracle/xe/oradata/XE/ftress_data_sml01.dbf
    input datafile fno=00012 name=/usr/lib/oracle/xe/oradata/XE/ftress_indx_sml01.dbf
    input datafile fno=00011 name=/usr/lib/oracle/xe/oradata/XE/ftress_indx_mdm01.dbf
    input datafile fno=00007 name=/usr/lib/oracle/xe/oradata/XE/ftress_data_mdm01.dbf
    channel ORA_DISK_1: starting piece 1 at 06-JUL-11
    channel ORA_DISK_1: finished piece 1 at 06-JUL-11
    piece handle=/usr/lib/oracle/xe/app/oracle/flash_recovery_area/XE/backupset/2011_07_06/o1_mf_nnndf_TAG20110706T155057_718dw649_.bkp tag=TAG20110706T155057 comment=NONE
    channel ORA_DISK_1: backup set complete, elapsed time: 00:00:15
    Finished backup at 06-JUL-11
    Starting Control File and SPFILE Autobackup at 06-JUL-11
    piece handle=/usr/lib/oracle/xe/app/oracle/flash_recovery_area/XE/autobackup/2011_07_06/o1_mf_s_755797849_718dwofy_.bkp comment=NONE
    Finished Control File and SPFILE Autobackup at 06-JUL-11
    RMAN> configure controlfile autobackup off;
    old RMAN configuration parameters:
    CONFIGURE CONTROLFILE AUTOBACKUP ON;
    new RMAN configuration parameters:
    CONFIGURE CONTROLFILE AUTOBACKUP OFF;
    new RMAN configuration parameters are successfully stored
    RMAN> alter database open;
    database opened
    RMAN> delete noprompt obsolete;
    RMAN retention policy will be applied to the command
    RMAN retention policy is set to redundancy 2
    using channel ORA_DISK_1
    Deleting the following obsolete backups and copies:
    Type                 Key    Completion Time    Filename/Handle
    Backup Set           3      06-JUL-11        
      Backup Piece       3      06-JUL-11          /usr/lib/oracle/xe/app/oracle/flash_recovery_area/XE/backupset/2011_07_06/o1_mf_nnndf_TAG20110706T133443_7184wr4d_.bkp
    Backup Set           4      06-JUL-11        
      Backup Piece       4      06-JUL-11          /usr/lib/oracle/xe/app/oracle/flash_recovery_area/XE/autobackup/2011_07_06/o1_mf_s_755789675_7184x7fp_.bkp
    deleted backup piece
    backup piece handle=/usr/lib/oracle/xe/app/oracle/flash_recovery_area/XE/backupset/2011_07_06/o1_mf_nnndf_TAG20110706T133443_7184wr4d_.bkp recid=3 stamp=755789684
    deleted backup piece
    backup piece handle=/usr/lib/oracle/xe/app/oracle/flash_recovery_area/XE/autobackup/2011_07_06/o1_mf_s_755789675_7184x7fp_.bkp recid=4 stamp=755789699
    Deleted 2 objects
    RMAN>
    Recovery Manager complete.
    RMAN error: See log for details.

    I think it is trying to overwrite exiting file. Either give a different name or cleanup the files in preferred location.

  • Got error while importing objects

    Hi,
    I got error with return code 8 while importing objects.
    Actually, i created Multiprovider and Two queries on that and transported those objects in the same request and released in SE09 and while importing these objects I got error with Return Code 8.
    Pls Help me, what i should do now.
    Thanks&Regards,
    Rafi

    Hi Mohd.
    Return code 8 is an error which indicates that some objects are missing. You will have to include these missing objects before you can create the transport successfully. In your scenario it might be a structure, CKF, RKF, missing info providers etc.
    Hope it helps.
    BR
    Stefan

  • Error while synching PDA with server

    Hello,
    Before I can load some CRM applications on to my PDA, I am trying to synch my PDA with the server.
    When I synchronized I got the device ID and also the message that synch has started successfully. But when I go in the NWA of the server ( on my laptop) and search this device ID it shows the following error
    "Error while Smart Sync inbound processing. Reset Smart Sync data on device to ensure consitency with middleware. Contact SAP Support and provide following detalied information: Inbound Processing of container with index 45 failed: Can not find top row"
    Does anyone know what could be wrong here?
    Regards,
    Prafful

    Hi,
    We are also experiencing this error. Where you able to find a solution? Do you have any troubleshooting steps you could share with me for when it does occur?
    Kind Regards,
    Vinnie

  • Got error while deplyoing..Please help

    Hello..I got an error while deploying a project having two rfc.It will fwrite data with first rfca nd commit it with 2nd.Now i got this error while deplyoing.No by\uikd error
    <b>Caught exception during application deployment from SAP J2EE Engine's deploy service:
    java.rmi.RemoteException: Cannot deploy application local/My_Project.. Reason: Clusterwide exception: Failed to deploy application local/My_Project. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is:     com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application local/My_Project. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
    (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
    Deployment exception : The deployment of at least one item aborted
    </b>
    I am new to ep.Only 2months in this field.Please help me...Thanx

    Hi,
       Have you included any 'Used DCs' in My_Project? If yes, first deploy the used components on the J2EE engine & then deploy local/My_Project.
       If you have not added any 'Used DCs', check if the component has already been deployed on the J2EE engine. If so, remove it & then try deploying it again.
    Revert in case of any queries.
    Regards,
    M.Subathra

  • Error while making connection with remote oracle database

    Dear,
    I am trying to make connection with oracle database but when i run java file it's raise an error "classnotfoundexception oracle.jdbc.driver.oracledriver"
    DriverManager.getConnection(
      "jdbc:oracle:thin:@erp:1521:ORCL", "apps",
      "apps");
    Pls any body have idea.
    Thanks.

    Thanks for support.
    Below is error which i am getting while making connection with remote database.
    C:\Program Files\Java\jdk1.7.0_05\bin>java OracleJDBC
    -------- Oracle JDBC Connection Testing ------
    Where is your Oracle JDBC Driver?
    java.lang.ClassNotFoundException: oracle.jdbc.driver.OracleDriver
            at java.net.URLClassLoader$1.run(URLClassLoader.java:366)
            at java.net.URLClassLoader$1.run(URLClassLoader.java:355)
            at java.security.AccessController.doPrivileged(Native Method)
            at java.net.URLClassLoader.findClass(URLClassLoader.java:354)
            at java.lang.ClassLoader.loadClass(ClassLoader.java:423)
            at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
            at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
            at java.lang.Class.forName0(Native Method)
            at java.lang.Class.forName(Class.java:186)
            at OracleJDBC.main(OracleJDBC.java:13)
    Advice.

Maybe you are looking for