Error while recovering datafile using rman

Hi Friends,
I was trying to recover the deleted datafile 5 , but getting the following error... ( oracle 10g , database archive log mode )
RMAN> startup
database is already started
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of startup command at 02/28/2012 10:54:30
ORA-01157: cannot identify/lock data file 5 - see DBWR trace file
ORA-01110: data file 5: 'F:\ORACLE\ORADATA\DEMO\DEM01.DBF'
RMAN> restore datafile 5;
Starting restore at 28-FEB-12
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=156 devtype=DISK
released channel: ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 02/28/2012 10:54:49
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27211: Failed to load Media Management Library
RMAN>
Whats the way out...

RMAN> show all;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE SBT_TAPE TO '%F'; # defa
ult
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
CONFIGURE DEVICE TYPE SBT_TAPE PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE CHANNEL DEVICE TYPE DISK MAXPIECESIZE 100 M;
CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE' MAXPIECESIZE 100 M;
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO 'G:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\S
NCFDEMO.ORA'; # default

Similar Messages

Got error while recover controlfile with rman

Dear all,
My controlfile and some datafiles were crash and i tried to recover their with rman as the following step:
1. startup nomount;
2. restore controlfile from autobackup;
3. alter database mount;
4. restore database;
5.SELECT archivelog_change#-1 FROM v$database;
ARCHIVELOG_CHANGE#-1
1301671
6.run {
set until scn 1301671;
recover database;
executing command: SET until clause
Starting recover at 01 พ.ย. 2006
using channel ORA_DISK_1
starting media recovery
media recovery failed
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 11/01/2006 15:38:01
ORA-00283: recovery session canceled due to errors
RMAN-11003: failure during parse/execution of SQL statement: alter database reco
ver if needed
start until change 1301671 using backup controlfile
ORA-00283: recovery session canceled due to errors
ORA-01190: controlfile or data file 1 is from before the last RESETLOGS
ORA-01110: data file 1: 'C:\ORACLE\ORADATA\DB01\SYSTEM01.DBF'
What happend? Please give me some advise.
Thaks for advance !
Chara

After every resetlogs you have to take fresh backup.
It seems you have opened your database in resetlogs and your backup is prior to this resetlogs.So the controlfile is showing inconsistance with the other datafiles.

Error while cloning database using RMAN

hi there,
Here is our setup:
OS: Solaris 5.9
Database:9.2.0.3
While cloning test database from our production database using RMAN, we happen to get the following error..
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/11/2007 15:28:59
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06100: no channel to restore a backup or copy of datafile 450
RMAN-06100: no channel to restore a backup or copy of datafile 449
give us a solution to rectify this problem.
Thanks,
Balu.

Can you please post the RMAN restore script ?
where are the backups located

Control file failed error while duplicating database using RMAN

I am using oracle database 10g R2 and trying to make a clone of the source database orcl on the same machine but with different directory structure with the name of test.
When i run the duplicate command to create test database, then following error is generted:
D:\>rman target sys@orcl nocatalog auxiliary /
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Nov 11 12:13:26 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
target database Password:
connected to target database: ORCL (DBID=1264668332)
using target database control file instead of recovery catalog
connected to auxiliary database: TEST (not mounted)
RMAN> @script.txt
RMAN> Run {
2> Allocate channel C1 type disk;
3> allocate auxiliary channel 'adisk_0' type DISK;
4> duplicate target database to "test";
5> #BACKUP INCREMENTAL LEVEL 1 DATABASE;
6> #BACKUP INCREMENTAL LEVEL 1 CUMULATIVE DATABASE;
7> #BACKUP INCREMENTAL LEVEL 0 DATABASE;
8> #delete obsolete;
9> }
allocated channel: C1
channel C1: sid=140 devtype=DISK
allocated channel: adisk_0
channel adisk_0: sid=157 devtype=DISK
Starting Duplicate Db at 11-NOV-11
contents of Memory Script:
   set until scn 12926250;
   set newname for datafile 1 to
"D:\TEST\ORADATA\SYSTEM01.DBF";
   set newname for datafile 2 to
"D:\TEST\ORADATA\UNDOTBS01.DBF";
   set newname for datafile 3 to
"D:\TEST\ORADATA\SYSAUX01.DBF";
   set newname for datafile 4 to
"D:\TEST\ORADATA\USERS01.DBF";
   set newname for datafile 5 to
"D:\TEST\ORADATA\EXAMPLE01.DBF";
   set newname for datafile 6 to
"D:\TEST\ORADATA\GL.DBF";
   restore
   check readonly
   clone database
executing Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 11-NOV-11
channel adisk_0: starting datafile backupset restore
channel adisk_0: specifying datafile(s) to restore from backup set
restoring datafile 00001 to D:\TEST\ORADATA\SYSTEM01.DBF
restoring datafile 00002 to D:\TEST\ORADATA\UNDOTBS01.DBF
restoring datafile 00003 to D:\TEST\ORADATA\SYSAUX01.DBF
restoring datafile 00004 to D:\TEST\ORADATA\USERS01.DBF
restoring datafile 00005 to D:\TEST\ORADATA\EXAMPLE01.DBF
restoring datafile 00006 to D:\TEST\ORADATA\GL.DBF
channel adisk_0: reading from backup piece D:\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_11_07\O1_MF_NNND0_TAG20111107T220822_7CJ
P
channel adisk_0: restored backup piece 1
piece handle=D:\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_11_07\O1_MF_NNND0_TAG20111107T220822_7CJ44MH4_.BKP tag=TAG20111107T220
channel adisk_0: restore complete, elapsed time: 00:01:46
Finished restore at 11-NOV-11
sql statement: CREATE CONTROLFILE REUSE SET DATABASE "TEST" RESETLOGS ARCHIVELOG
MAXLOGFILES     16
MAXLOGMEMBERS      3
MAXDATAFILES      100
MAXINSTANCES     8
MAXLOGHISTORY      292
LOGFILE
GROUP 1 ( 'D:\TEST\ORADATA\REDO01.LOG' ) SIZE 50 M REUSE,
GROUP 2 ( 'D:\TEST\ORADATA\REDO02.LOG' ) SIZE 50 M REUSE,
GROUP 3 ( 'D:\TEST\ORADATA\REDO03.LOG' ) SIZE 50 M REUSE
DATAFILE
'D:\TEST\ORADATA\SYSTEM01.DBF'
CHARACTER SET WE8MSWIN1252
contents of Memory Script:
   switch clone datafile all;
executing Memory Script
datafile 2 switched to datafile copy
input datafile copy recid=1 stamp=766930525 filename=D:\TEST\ORADATA\UNDOTBS01.DBF
datafile 3 switched to datafile copy
input datafile copy recid=2 stamp=766930525 filename=D:\TEST\ORADATA\SYSAUX01.DBF
datafile 4 switched to datafile copy
input datafile copy recid=3 stamp=766930526 filename=D:\TEST\ORADATA\USERS01.DBF
datafile 5 switched to datafile copy
input datafile copy recid=4 stamp=766930526 filename=D:\TEST\ORADATA\EXAMPLE01.DBF
datafile 6 switched to datafile copy
input datafile copy recid=5 stamp=766930526 filename=D:\TEST\ORADATA\GL.DBF
contents of Memory Script:
   set until scn 12926250;
   recover
   clone database
    delete archivelog
executing Memory Script
executing command: SET until clause
Starting recover at 11-NOV-11
channel adisk_0: starting incremental datafile backupset restore
channel adisk_0: specifying datafile(s) to restore from backup set
destination for restore of datafile 00001: D:\TEST\ORADATA\SYSTEM01.DBF
destination for restore of datafile 00002: D:\TEST\ORADATA\UNDOTBS01.DBF
destination for restore of datafile 00003: D:\TEST\ORADATA\SYSAUX01.DBF
destination for restore of datafile 00004: D:\TEST\ORADATA\USERS01.DBF
destination for restore of datafile 00005: D:\TEST\ORADATA\EXAMPLE01.DBF
destination for restore of datafile 00006: D:\TEST\ORADATA\GL.DBF
channel adisk_0: reading from backup piece D:\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_11_09\O1_MF_NNND1_TAG20111109T223628_7CO
P
channel adisk_0: restored backup piece 1
piece handle=D:\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_11_09\O1_MF_NNND1_TAG20111109T223628_7COGJZVT_.BKP tag=TAG20111109T223
channel adisk_0: restore complete, elapsed time: 00:00:07
channel adisk_0: starting incremental datafile backupset restore
channel adisk_0: specifying datafile(s) to restore from backup set
destination for restore of datafile 00001: D:\TEST\ORADATA\SYSTEM01.DBF
destination for restore of datafile 00002: D:\TEST\ORADATA\UNDOTBS01.DBF
destination for restore of datafile 00003: D:\TEST\ORADATA\SYSAUX01.DBF
destination for restore of datafile 00004: D:\TEST\ORADATA\USERS01.DBF
destination for restore of datafile 00005: D:\TEST\ORADATA\EXAMPLE01.DBF
destination for restore of datafile 00006: D:\TEST\ORADATA\GL.DBF
channel adisk_0: reading from backup piece D:\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_11_10\O1_MF_NNND1_TAG20111110T221428_7CR
P
channel adisk_0: restored backup piece 1
piece handle=D:\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_11_10\O1_MF_NNND1_TAG20111110T221428_7CR1MQFO_.BKP tag=TAG20111110T221
channel adisk_0: restore complete, elapsed time: 00:00:16
starting media recovery
archive log thread 1 sequence 524 is already on disk as file D:\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_11_11\O1_MF_1_524_7CS
C
archive log filename=D:\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_11_11\O1_MF_1_524_7CSG2HVT_.ARC thread=1 sequence=524
media recovery complete, elapsed time: 00:00:14
Finished recover at 11-NOV-11
contents of Memory Script:
   shutdown clone;
   startup clone nomount ;
executing Memory Script
database dismounted
Oracle instance shut down
connected to auxiliary database (not started)
Oracle instance started
Total System Global Area     230686720 bytes
Fixed Size                     1248236 bytes
Variable Size                 67109908 bytes
Database Buffers             155189248 bytes
Redo Buffers                   7139328 bytes
sql statement: CREATE CONTROLFILE REUSE SET DATABASE "TEST" RESETLOGS ARCHIVELOG
MAXLOGFILES     16
MAXLOGMEMBERS      3
MAXDATAFILES      100
MAXINSTANCES     8
MAXLOGHISTORY      292
LOGFILE
GROUP 1 ( 'D:\TEST\ORADATA\REDO01.LOG' ) SIZE 50 M REUSE,
GROUP 2 ( 'D:\TEST\ORADATA\REDO02.LOG' ) SIZE 50 M REUSE,
GROUP 3 ( 'D:\TEST\ORADATA\REDO03.LOG' ) SIZE 50 M REUSE
DATAFILE
'D:\TEST\ORADATA\SYSTEM01.DBF'
CHARACTER SET WE8MSWIN1252
released channel: C1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 11/11/2011 12:16:21
RMAN-06136: ORACLE error from auxiliary database: ORA-01503: CREATE CONTROLFILE failed
ORA-01504: database name 'TEST' does not match parameter db_name 'orcl'
RMAN> **end-of-file**
Script.txt
Run {
Allocate channel C1 type disk;
allocate auxiliary channel 'adisk_0' type DISK;
duplicate target database to "test";
}Kindly help?

Moazzam wrote:
RMAN-06136: ORACLE error from auxiliary database: ORA-01503: CREATE CONTROLFILE failed
ORA-01504: database name 'TEST' does not match parameter db_name 'orcl'
Kindly help?>Please check what is the value of parameter db_name in the standby database? It should be match with TEST name
Cheers

ORA-27067 Error while restoring database using RMAN

Hi All,
I am trying to restore the backups from my production database to an other server. I was able to restore the spfile and control files but at the step where I restore the datafiles I get the following error:
RMAN-03002: failure of restore command at 11/03/2008 14:28:16
ORA-19587: error occurred reading 0 bytes at block number 1
ORA-27091: skgfqio: unable to queue I/O
ORA-27067: skgfdisp: size of buffer is invalid
The OS and the Oracle version on the source server (on which the backups were taken) and the target server (the backups being restored to) are the same. They both are running SUNOS 5.9 and Oracle 9.2. I
Below are what were reported in the trace files:
Unix process pid: 12359, image: oracle@ (TNS V1-V3)
*** SESSION ID:(13.1) 2008-11-03 15:23:26.265
*** 2008-11-03 15:23:26.275
corrupt block 1 found during reading backup piece,file=/xxx/xxx/36jucqpe_1_1.bak, corr_type=1
dump corrupted block
2F11600 00020000 00000001 00000000 00000101 [................]
2F11610 00000000 00000000 00000000 00000000 [................]
Repeat 6 times
*** 2008-11-03 16:19:29.778
corrupt block 1 found during reading backup piece,file=/xxx/xxx/36jucqpe_1_1.bak, corr_type=1
dump corrupted block
3211C00 00020000 00000001 00000000 00000101 [................]
3211C10 00000000 00000000 00000000 00000000 [................]
Repeat 6 times
Redo thread mounted by this instance: 0 <none>
Oracle process number: 14
Unix process pid: 12194, image: oracle@ (TNS V1-V3)
*** SESSION ID:(11.3) 2008-11-03 14:09:42.986
(blkno = 0x88, size = 276, max = 1, in-use = 1, last-recid= 0)
(blkno = 0x89, size = 56, max = 145, in-use = 1, last-recid= 1)
*** 2008-11-03 15:16:40.960
*** SESSION ID:(13.1) 2008-11-03 15:16:40.951
=====================
PARSING IN CURSOR #2 len=68 dep=0 uid=0 oct=42 lid=0 tim=172140509128 hv=287842151 ad='35cd9364'
alter session set events '10046 trace name context forever, level 8'
END OF STMT
EXEC #2:c=0,e=250,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=4,tim=172140509103
WAIT #2: nam='SQL*Net message to client' ela= 8 p1=1650815232 p2=1 p3=0
*** 2008-11-03 15:17:18.666
WAIT #2: nam='SQL*Net message from client' ela= 36822299 p1=1650815232 p2=1 p3=0
=====================
PARSE ERROR #2:len=50 dep=0 uid=0 oct=3 lid=0 tim=172177341974 err=1219
select /*+ FULL(t) */ count(*) from sys.source$ t
WAIT #2: nam='SQL*Net break/reset to client' ela= 61 p1=1650815232 p2=1 p3=0
WAIT #2: nam='SQL*Net break/reset to client' ela= 279 p1=1650815232 p2=0 p3=0
WAIT #2: nam='SQL*Net message to client' ela= 5 p1=1650815232 p2=1 p3=0
Unix process pid: 12156, image: oracle@ (TNS V1-V3)
*** SESSION ID:(11.3) 2008-11-03 14:09:08.687
Archiving is disabled
Archiving is disabled
Can anyone help me resolve this error?
Thanks,
Ashok

Hi,
We finally got this issue resolved. I think the error was because the source database server was running 64 bit Oracle 9.2.0 and we installed a 32 bit Oracle 9.2.0 database on the target server. We then did a fresh install of 64 bit Oracle 9.2.0 database on the target server and the restoration worked. Also, after copying all the backup files to the target DB server, change the access rights of all those files and the folder containing them to 777.
Thanks,
Ashok

Error while creating stock using tcode: MB1C

Error while creating stock using tcode: MB1C
The Error is: Check table T004F:entry G006 does not exist

Hi ,
Please check the FSV (field status variant) for your company code in OBY6 .
then go to transaction code OB14 --> enter the FSV --> Check if field status group G006(Material account) is maintained there or not.
if not please maintain it.
Thanks & Regards
Anshu

Error while migrating users using CSSImportExportUtility

Error while migrating users using CSSImportExportUtility
I'm tring to export all user and group information from a Hyperion Shared Services 9.2.1 by using CSSExport.bat
When there was only native directory in HSS, i can export these information successfully.
But when I enabled NTLM external user authentication following error occurred:
Exception in thread "main" java.lang.UnsatisfiedLinkError: getOSVersion
at com.hyperion.css.spi.impl.ntlm.NTLMProvider.getOSVersion(Native Metho
d)
at com.hyperion.css.spi.impl.ntlm.NTLMProvider.<clinit>(Unknown Source)
at com.hyperion.css.spi.impl.ntlm.NTLMConnectionClient.getUsers(Unknown
Source)
at com.hyperion.css.CSSAPIExtnImpl.getUsers(Unknown Source)
at com.hyperion.css.CSSAPIImpl.getUsers(Unknown Source)
at com.hyperion.css.CSSAPIImpl.initialize(Unknown Source)
at com.hyperion.css.exchange.NativeProviderManager.<init>(Unknown Source
at com.hyperion.css.exchange.ImportExportManager.cssExport(Unknown Sourc
e)
at com.hyperion.css.exchange.CommandUtility.run(Unknown Source)
at com.hyperion.css.exchange.CommandUtility.main(Unknown Source)
I searched reference documents on the web, found this article: (http://download.oracle.com/docs/cd/E12825_01/epm.111/readme/mdm_111110_readme.html)
Troubleshooting Tip: If HSS is configured for an NTLM provider, DRM services may not start due to error: "Exception Emdm_Exception with message 'Could not Initialize CSS. Error: 'getOSVersion'."
You may receive the following error after clicking the "Enable CSS" button in DRM Console: “LoadLibrary("C:\Hyperion\Master Data Management\mdm_ntier_css_validator.dll") failed - The specified module could not be found.”
To resolve both of these conditions, update the Windows System Path on the Data Relationship Management server with the applicable JRE and CSS pathing below.
NOTE: Reboot the Data Relationship Management server machine after making any changes to the Windows Path.
NOTE: Ensure that only one JRE version and one CSS version are referenced in the Windows Path.
? For HSS 9.3.1:
%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin;%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin\client;%HYPERION_HOME%\common\CSS\9.3.1\bin;
? For HSS 9.3.0:
%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin;%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin\client;%HYPERION_HOME%\common\CSS\9.3.0\bin;
? For HSS 9.2.0.3:
%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin;%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin\client;%HYPERION_HOME%\common\CSS\9.2.0.3\bin;
? For HSS 9.2.0:
%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin;%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin\client;%HYPERION_HOME%\common\CSS\9.2.0\bin;
I found these is no directory "%HYPERION_HOME%\common\CSS\9.2.0\bin;" exists but "%HYPERION_HOME%\common\CSS\9.2.1\bin;"
I configured PATH by setting to above, and tried CSSExport again, still failed.
Than I disabled the NTLM is HSS, tried CSSExport again. It was successful.
So I am convinced that the problem caused by NTLM or PATH environment variable or some files associated.
Does anybody know the solution ?

I recommend you upgrade at least to 10.1.0.5. 10.1.0.2 comes with the very first version of csalter.plb, which has not the current implementation. From and to which character set do you try to migrate?
-- Sergiusz

Error while Loading Budgets Using AMG

Error while Loading Budgets Using AMG
Dear All,
I am trying to load Budgets into ORACLE Projects using AMG API's..
I have developed PL/SQL which uses below procedures of pa_budget_pub package.
init_budget;
load_budget_line;
execute_draft_budget;
baseline_budget;
Procedure execute_create_draft_budget fails with following error message.
error message: Please enter a valid product code for this project.
error message: You entered an invalid API parameter.Please enter valid parameter and try again. Parameter Name: Resource List Parameter Value: 1446
error message: Project: AC044. Please specify a valid resource list.
error message: Project: AC044. Please specify a valid resource list.
Could somebody explain me how to resolve this error message and load the budget lines.
Thanks in Advance.
Afsal Basha.

What I'm saying is, verify the column name. Dont post if not possible.
Example follows, with one table intentionally "hidden".
SQL> create table "tEsT" ("MaxNumber" float, "MaxnumbeR" number);
SQL> select table_name,column_name from user_tab_columns where table_name like 't%';
TABLE_NAME                     COLUMN_NAME
tEsT                           MaxNumber
tEsT                           MaxnumbeR
teST                           iD
teST                           MaxNumberHth,
Fredrik

Error while insert data using execute immediate in dynamic table in oracle

Error while insert data using execute immediate in dynamic table created in oracle 11g .
first the dynamic nested table (op_sample) was created using the executed immediate...
object is
CREATE OR REPLACE TYPE ASI.sub_mark AS OBJECT (
mark1 number,
mark2 number
t_sub_mark is a class of type sub_mark
CREATE OR REPLACE TYPE ASI.t_sub_mark is table of sub_mark;
create table sam1(id number,name varchar2(30));
nested table is created below:
begin
EXECUTE IMMEDIATE ' create table '||op_sample||'
(id number,name varchar2(30),subject_obj t_sub_mark) nested table subject_obj store as nest_tab return as value';
end;
now data from sam1 table and object (subject_obj) are inserted into the dynamic table
declare
subject_obj t_sub_mark;
begin
subject_obj:= t_sub_mark();
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,subject_obj from sam1) ';
end;
and got the below error:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7
then when we tried to insert the data into the dynam_table with the subject_marks object as null,we received the following error..
execute immediate 'insert into '||dynam_table ||'
(SELECT

887684 wrote:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7The problem is that your variable subject_obj is not in scope inside the dynamic SQL you are building. The SQL engine does not know your PL/SQL variable, so it tries to find a column named SUBJECT_OBJ in your SAM1 table.
If you need to use dynamic SQL for this, then you must bind the variable. Something like this:
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,:bind_subject_obj from sam1) ' USING subject_obj;Alternatively you might figure out to use static SQL rather than dynamic SQL (if possible for your project.) In static SQL the PL/SQL engine binds the variables for you automatically.

Getting error while creating subsite using custom template in sharepoint2013

Hi,
I am getting the following error while creating subsite using custom template in sharpoint2013. even publish features are enabled.
Please suggest me on this.
Thanks in advance.

You need to enable the PerformancePoint Service Site Collection Features(PPSMonDatasourceCtype)
on the target site collection. go to site action > site settings> site collections features > and enable it and now try again.
Similar case: http://imughal.wordpress.com/2012/09/20/dependency-feature-ppsmondatasourcectype-id-05891451-f0c4-4d4e-81b1-0dabd840bad4-for-feature-bicenterdataconnections-id-3d8210e9-1e89-4f12-98ef-643995339ed4-is-not-activated-at-this-scop/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

INVALID_QUEUE_NAME : Error while scheduling message using qRFC

Hello SDNers
We are currently performing our PI 7.1 upgrade and one of our scenario uses a Sender SOAP of the type EOIO. We tried executing this scenario in PI 7.1 XID environment and in it worked fine without any errors but in our PI 7.1 QA environment it is giving the following errors
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SCHEDULE_ERROR</SAP:Code>
<SAP:P1>XBQOC___*</SAP:P1>
<SAP:P2>INVALID_QUEUE_NAME</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error while scheduling message using qRFC (queue name = XBQOC___*, exception = INVALID_QUEUE_NAME)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can you please exaplian what could be the issue we are facing.
Thanks.
Kiran
Edited by: Kiran Sakhardande on Oct 22, 2008 4:08 PM

HI Kiran,
Have gone throgh the following link?
INVALID_QUEUE_NAME
Regards
Sridhar Goli

Getting error while publishing workflow using SP designer for SharePoint 2013

Hi,
I am try to setup Workflow manager for our sharepoint applications.
WF manager set ran without any issue.
I registered the SPWorkflow service which succeeded as well. The Workflow service application shows "Workflow is connected"
I am creating a workflow using sharepoint designer using my credential (not Service account). I am able to save it but while publishing, its prompting with an error.
The error says "Errors were found while compiling the workflow.The workflow files were saved but cannot run." Clicking advanced button show
"Microsoft.SharePoint.SPException: We're sorry, we weren't able to complete the operation, please try again in a few minutes. If you see this message repeatedly, contact your administrator.
at Microsoft.SharePoint.SPScaleOutDatabaseMap.CreateSqlSession(ISPScaleOutDatabaseMapProvider mapProvider, Byte[] compositeKey, Guid forceRefreshVersion, Guid& version)
at Microsoft.SharePoint.SPScaleOutDatabaseCommandExecutor.Execute(ExecuteDelegate operation, ISPScaleOutDatabaseMapProvider mapProvide"
Any help would be highly appreciated
Thanks,

Hi,
According to your post, my understanding is that you got error while publishing workflow using SharePoint designer for SharePoint 2013.
Please check whether the Central Admin > Manage Service Application-> “App Management Service” is started.
Please check whether the “Configure service application associations”, ”App Management Service” is already associated.
Then please check whether the “Manage Services on server” and the “App Management Service” is started.
In addition, please try to re-register Workflow Service.
If the issues still exists, please follow the steps in the
Steps to Verify that Server Is Correctly Set Up. After you verified that the server is correctly set up, follow the steps in the
Steps to Troubleshoot Workflow Management Service and
Troubleshooting the Service Bus for Windows Server then retry your action related to publishing workflows
More information:
http://wp.ahcheng.com/2013/03/23/error-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run/
http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Error while trying to use '{' in the query

Hi,
The below mentioned query is giving Error while trying to use '{'
Query:
select s,x from table(SEM_MATCH(
'{?s rdf:type <http://www.cs.com/sbip/dwh/mdm/data_modeling#Base_Term> .
?s ?p ?x}',
SEM_Models('foundation'),
SEM_RuleBases('OWLPRIME'),
SEM_ALIASES(SEM_ALIAS('dm','http://www.cs.com/sbip/dwh/mdm/data_modeling#'),
SEM_ALIAS('owl','http://www.w3.org/2002/07/owl#')), null, 'INVALID'))
where regexp_like(x,'Customers','i');
Error details:
ORA-29532: Java call terminated by uncaught Java exception: oracle.spatial.rdf.server.TokenMgrError: Lexical error at line 1, column 1. Encountered: "{" (123), after : ""
ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 178
ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 67
ORA-06512: at line 4
I am unable to use Option, Filter in query.
Any solution?
Please let me know do i need to apply any patch?
Note: I am using Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
Regards,
Kavitha.

Hi,
For OPTIONAL support in 11.1.0.7.0, you need the following patch
Patch 7600122: CURLY BRACE SYNTAX,VIRTUAL MODELS, NETWORK INDEXES AND HINTO FRAMEWORK SUPPORT
Support for SPARQL FILTERs in SEM_MATCH is not available for 11.1.0.7.0. You will need version 11.2.0.1.0 or later for FILTER support. With 11.2.0.1.0, we recommend that you apply our latest patch set:
Patch 9819833: SEMANTIC TECHNOLOGIES 11G R2 FIX BUNDLE 2
All of the above patches are available through My Oracle Support.
Thanks,
Matt

"Submission status" error while posting comments using evcom

Hi friends,
I am getting "Submission status" error while posting comments using evcom. This error comes up even when we use "post comments" option in Action Pane.
The error text goes like this :
Error Message -
This cell can not be updated. Submission status must be modified to allow changes.
010_000|2009.TOTAL|INTERCO|NOPC
How can we get rid of this error?

That's means the status for that specific category, time entity is approved and you can not do any changes including
comments chnages.
You have to change first the work status for that entity and after that you will be able to submit your comments.
Regards
Sorin radulescu

Unknown error while updating module use!

I restarted XE with "/etc/init.d/oracle-xe stop /etc/init.d/oracle-xe start" and then see this error message in the terminal console. Every serveral minutes, the error "Unknown error while updating module use!" is echoed.
Any advice?

Look for the alert_xe.log file, maybe you'll find some additional information there if that message is related to your XE instance.
C.

Error while recovering datafile using rman

Similar Messages

Maybe you are looking for