Got Mine. Two Questions

Love the 2.0 and 3G. Here are my questions:
Anyone got push calendar/contacts working like it should? Mine's set up with MobileMe and it does sync over the air, but it's not Pushing automatically. If I tell my MBP to sync .Mac (not saying MobileMe yet), it will pull in whatever I put in the iPhone, but I am having to trigger the sync.
Second question:
Anyone figure out a way to SEND email from a non-me.com or mac.com email address in MobileMe? Or even provide a "reply to" address that's not me.com or mac.com? I was hoping to be able to use MobileMe to send emails where the recipient only saw my business email address and not me.com. Doesn't look like it can be done, which is a shame.

jaf089:
. The face plate has changed, presumably for international markets where people don't speak English.
2. The player will be charged in a maximum of 4 hours. The way to tell its charged is once the charging icon and glow stop, wait another 30 minutes for the final slow charge, then it will be ready.
You don't need to update with two different firmware updates, you can go straight to an update without one beforehand.
The .0.03 update fixes a battery charging bug, if you don't have this already, but allows the player to stay accessible with MediaSource.
The v2 updates give the player MTP access (driverless access with Windows XP and Windows Media Player 0). Be warned though, some people have had stability problems with both the connection and software after this upgrade.

Similar Messages

I have got two questions: 1. Can I use wireless Mouse with an I Pad? 2. Is there Nano-Technology in use in Apple / Mac - Computers, I Pads and or Phones?

I have got two questions: 1. Can I use a wireless Mouse with an I Pad? 2. Is there Nano-Technology in use in Apple / Mac - Computers, I Pads and or Phones?
Thanks Roland

There actually is a type of "pointer" native to iOS. it's part of the AssistiveTouch feature, used to replicate multitouch gestures with one finger. You just can't control it with a mouse.
Anyway, as far as I can discern the iPad does not use nanotechnology in any part of its construction.

Basic question: I bought PSE13 on Amazon. Got shipped two disks but my Mac doesn't have disk drive. Where do I get download info? Thanks.

I bought PSE13 on Amazon. Got shipped two disks but my Mac doesn't have a disk drive. I have an Adobe account but it has no record of my PSE purchase from Amazon, of course. I have the serial number on my box. Can anyone point me to how I can download this software? Or do I have to return my Amazon purchase? Thanks.

This may do it
Download Photoshop Elements products | 13, 12, 11, 10

How can I Change my security questions I for got mine

I for got my security questions so I can't buy any thing how can I rest them

Hi Dantea1234,
Thanks for visiting Apple Support Communities.
If you need to reset your security questions, you can use this method:
Navigate to My Apple ID using your web browser.
Click "Manage your account"
When prompted, sign in using your Apple ID and password.
Click Password & Security
You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
However, if you're not able to remeber your Apple ID password, or receive email to a rescue email address, you can contact iTunes Store Support for help:
You'll need to contact iTunes Store support to have your questions and answers reset.
From:
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/HT5312
All the best,
Jeremy

Two questions on SP1 and Vista booting

Hi all,
two questions:
1) did I understand correctly that if I want SP1 on my machine I have to install it manually, as it is not included in the automatic update routines?
2) my machine failed yesterday, I got a message "Windows failed to start. A recent hardware of software change might be the cause." The only thing I can think of is that before switching it off the previous time, I had inserted a USB hard-drive to copy some files on it. But I had continued working on the machine normally. The other unusual event is that the day before it was very slow booting up, so afer it finished booting up, I restarted it.
When the system failed to start, I tried the automatic procedures several times, which always ended up with "windows cannot solve the problem automatcally,
contact your vendor". In the penultimate attempt, I also clicked on an "advanced option tab" and restored the system, but that also did not solve the problem. Then, this morning I switched the machine on again to write down the exact error message I got, and instead, unexpectedly (and rather gladly), the machine started up normally. So, what might have happened? Should I get my machine (which is less than a month old) checked?
thanks!
paola

Yes, theres a chance to have a complete image from the actual state of your operating system including all programs etc....
There are several solutions:
1. The Commercial One: http://en.wikipedia.org/wiki/Ghost_(software)
2. Another commercial one: http://www.acronis.com/homecomputing/products/trueimage/features-cloning.html
3. The Free one: http://www.ubcd4win.com/
(but more complicated and you need in all cases a external data storage, there are some tools on this ToolsCD which are free and do almost the same like acronis or ghostimage)
I guess there are still thousands of cloning programs but I tried to give you the most important and most reliable tools.
If I were you, I would check the UBCD4Win, burn it to a CD, buy an external HDD, start the UBCD4WIn and clone your drive to the external one. So you can perform incremental backups of your HDD and if something happens, you must only do the whole process like you perform the backup just reverse.
Hope I could help you..
Cheers

Two questions about the new iWeb

Hi
I've got two questions about the new iWeb.
1. Is it possible to blog online now? Meaning adding a new blog entry without having to be on your own Mac? This is a feature I've been waiting for since iWeb first was released.
2. Is it possible to choose the format of images? Earlier editions had the option to "optimize" images but that meant it changed it into .png meaning the site got a lot heavier than if .jpg was used. And since I have relatives who still only have an isdn connection I need to be able to have the website as light as possible.
thanks

Ah well... thanks for the quick answer
Message was edited by: Guðlogi

Two questions about my new Mac Pro

Just got my new Mac Pro up and running and have two questions (issues)
First, I had to buy the DVI to ADC Display adapter to hook up my Cinema Display but now I can't turn the computer on from the monitor like I use to. Is that right? It's no big deal to have to turn it on at the computer itself, just wondering if anybody else is having this happen.
Also, the audio out at the back of the computer doesn't work. I've tried plugging in my speaker as well as my headset and nothing. If I plug either of those into the headset jack in the front of the computer all is well. Any thoughts?
Otherwise, I sure do love my Mac Pro!
Thanks.
jamie

I had to buy the DVI to ADC Display adapter to hook up my Cinema Display but now I can't turn the computer on from the monitor like I use to. Is that right?
ADC has pins for power control and the power light. DVI does not have these signals so the display's power button cannot turn on the computer when used with a DVI to ADC adapter.

I got this flashing question mark, i did some research into this and found out that the hard drive is the cause

i recently found my ibook and decided to see if it would still turn on. it did but i got this flashing question mark, i did some research into this and found out that the hard drive is the cause. so i opened it up replaced the hard drive and closed it up, booted from the disc and crossed my fingers but it did not pick up the hard drive. i thought it might not have been installed properly, so i opened it up to check the connections to make shure they were secure and closed it back up but now it wont even boot from the disc. so dose anyone know whats wrong with it because i really don't just want throw it away if its a simple fix. please if anyone know i would greatly appreciate it.
<Re-Titled By Host>

There often were more than one build of Apple computer per model number designation...
In the instance of iBook (white dualUSB) there appear to be two with number A-1007.
And both of these were 14-inch display models.
•iBook G3/800 14-Inch (32 VRAM - Tr) 800 MHz PowerPC 750fx (G3)
•iBook G3/900 14-Inch (Early 2003 - Op) 900 MHz PowerPC 750fx (G3)
•Apple iBook Specs (All iBook Technical Specs) for entire series - everymac:
http://www.everymac.com/systems/apple/ibook/index-ibook.html
There are a few fairly good repair guides online, some on http://iFixit.com site.
Here's the link to the early iBook G3 series, includes color + white dualUSB.
If your iBook is a 14-inch G3 white dualUSB model that one is there, too:
•iBook G3 Repair guides - iFixit:
https://www.ifixit.com/Device/iBook_G3
Either of these may be able to run a system no later than OS X Tiger 10.4.11.
So a system install disc set could be used to troubleshoot, install, restore &
prepare a replacement hard drive for a new system.
Not certain what the issues are behind your situation, there may be more than
meets the eye. Some models of iBook were more prone to hardware problems
and as they age, fewer opportunities to affordably repair them exist.
Good luck in resolving the iBook G3 issues...!

Two questions, maybe stupid ones

Hi
Two iPhoto questions if that is OK.
The first one may be irrelevant depending on the answer to the second.
By way of background,I organised my digital photos on previous computers into a directory by year, this has been on PCs until now.
Then I name a subdirectory with the name of the event, then if I modify any of the images I put those in a further subdirectory and so on.
So for example I may have, on my PC:
C:\photos\2008\Paul's wedding\worked images\printed images\weddingprint1.jpg
And I have photos from about 2003 to 2009 and each year has between 5 and 20 events and all have a folder with "worked" images.
This system is obviously a bit clunky but has worked for me.
So now I am on a MacBook Pro and have copied everything over which as gone without a hitch. I have imported the images into iPhoto and left the original copies on the MacBook Pro HD.
I like the directory structure that I use and want to keep it because it fits with previous backups, I can navigate if I share the drive over a network and so on.
However iPhoto copies the photos into its own structure, it organises everything by year as I do, but then if you look in terminal there is only one level of subdirectory. So I have, for example
my-macbook-pro:2009:worked_1
my-macbook-pro:2009:worked_2
my-macbook-pro:2009:worked_3
With no idea which each refers to unless I go into iPhoto.
This is a pain in the neck for wanting to move the photos at a later date.
So I am currently keeping all the photos in my original structure and letting iPhoto keep its own. This doubles the amount of disk space needed.
So, that was a bit of a long story.
Here are the two questions.
1. Is there a way to get iPhoto to work with my directory structure?
2. Is there any way to get iPhoto to "watch" a directory, day one called "digital photos" and all its subdirectories and add any new photos to the iPhoto library. Picassa on the PC does this. It means that all I have to do is copy photos from my camera and iPhoto will automatically update.

Terence Devlin wrote:
However, there are a number of potential pitfalls using this system.
1. Import and deleting pics are more complex procedures
I am not sure how it is more complex. Granted, importing from your camera to iPhoto directly is a "one step" process, but dragging and dropping your photos from your desktop (or a folder) into iPhoto after importing them from the camera is not what I would call complex.
Deleting seems straight forward as well. Pick the photo in iPhoto and delete it. However, my situation is probably different than most people. Since I don't use iPhoto as my main organization and storage for my photos, anything I add to iPhoto are what is left after I have already sorted and erased the bad ones out of my camera. I don't usually have a need to remove much from iPhoto.
Terence Devlin wrote:
2. You cannot move or rename the files on your system or iPhoto will lose track of them on systems prior to 10.5 and iPhoto 08. Even with the later versions issues can still arise if you move the referenced files to new volumes or between volumes.
I never used iPhoto much on previous versions because I hated the way it organized stuff and didn't like that you HAD to copy your stuff to the iPhoto library files. I recently upgraded to my OS 10.5 iMac from my old OS 10.4 eMac and decided to play with iPhoto again. When I discovered I could use it with my EXISTING library folder structure without having to copy everything into iPhoto, I have been using it more these past couple weeks that I had the past five years of having a version of iPhoto available to me.
Terence Devlin wrote:
3. Most importantly, migrating to a new disk or computer can be much more complex.
Perhaps.
Terence Devlin wrote:
Always allowing for personal preference, I've yet to see a good reason to run iPhoto in referenced mode unless you're using two photo organisers.
Well I think there is the big difference between us. It sounds like you use iPhoto as your primary photo tool for importing and organizing your library. I do mine manually and use iPhoto as an accessory for other secondary stuff so I don't depend on iPhoto to be able to find stuff or when moving from one system (new computer, new hard drive, new operating system, etc.) to another.
Terence Devlin wrote:
Remember that it you edit the pics via iPhoto (either with iPhoto itself or with another editor) it will store the edited version within the Library Package. And if you edit the pics via any other method the edits will not be available in iPhoto.
Yep, that I am aware of. My personal preference is to NEVER alter the original files from my cameras at all. Always work on copies. So I do find iPhoto fun to make quick edits to photos I add to it like cropping knowing that I am not actually altering the original in any way.
Likewise, if I do any editing outside of iPhoto it will again be on a copy for a specific reason, so I won't need those edits to be back flushed into iPhoto. If I do I will just add the new edited version back to iPhoto.
Of course shouldn't we really be more concerned with the secret government agencies tracking our photos via the face identification feature of iPhoto? {reference to another user's post in a different thread Terence and I both commented on}
Cheers,
Patrick

Two questions before migrating to Revel

Hello,
Two questions, please:
1. I chose Photoshop.com because it was the only service which did not reduce the photo quality of the files I uploaded. Will Revel maintain that same policy?
2. If I move the photos, will I need to update any link of any file I shared through Photoshop embed api? (the api.photoshop.com... links I got from the "share button") or you will redirect those links to a new address on Ravel? Will Ravel allow me to embed my pics at all?
Thanks.

1) Revel will retain the resolution of the files when you move them.
2) If you allow the files to be migrated, then any links previously used from photoshop.com will be redirected to Revel and should still work. If you archive the files back to your computer and then add them to Revel manually (not using the migration offer), or if you add new files then you will need to send new links to Revel.
Pattie

Two questions - album art and shuffling

Ok...I have two questions, but didn't really want to make two posts...
The first has to do with album art... All of my album art is in itunes and has been loaded onto my ipod (16gb, 4th gen)...I know it's there because I went song by song and did it and checked it. But my ipod chooses when it feels like displaying it...sometimes it displays it, sometimes I get the music note. If it's not there and I turn it off and on again, it will reappear...it does it on random songs when it feels like it. I tried resetting the ipod and that didn't help and it has resyncing multiple times. It's just hit or miss if the ipod feels like showing it.
My second question has to do with the shuffle feature. I always shuffle my songs, but it seems like it's only shuffling the same songs...mainly those that I first synced. Every now and then it will throw in a new song, but it seems like it's shuffling the same songs constantly....and they don't have more plays than others because I've flipped through them. It's really annoying because it seems like it's always the same songs...
Has anyone run into this also or have any ideas? I figured I'd through this out there before I exchange it out for a new one... both problems are just annoyances that are driving me nuts...especially the shuffle thing...I'm tired of the same songs!! Thanks guys!

1) Have you checked that the album art is actually on each file? Right-click on the song and select, "Get Info" and then the "Illustration" tab. Now, press the "Next" button and make sure that all the songs that you think have got the album artwork actually have them.
People often have problems like this with album artwork, or that two versions of the same album appear on the iPod etc. These problems are related to iTunes and how the music has been setup - and not usually the fault of the iPod.
2) The shuffle feature. I don't know what anyone else has to say about this but I find it REALLY bad on ALL iPod products. This is why: it starts to re-shuffle the music before it has played all of them at least once. I find this rather illogical and haven't experienced this with any other brand but I guess Apple programmed it like that for a reason. I thought they could have at least improved it somewhat on the Shuffle 2G as that is its main selling point. As a result, I get some songs that play 10 times and others that never play at all.
Hope this helps.

Two Questions -- Ipod Export Fail and Wmvs

Hey there,
New to quicktime on windows, got two questions.
First, when I try to export for the IPOD default setting, I get the error -2147023174: an unknown error occured.
Second, is there any way to play WMVs in Quicktime on a PC? Flip4Mac is obviously not going to work, but is there an equivalent for windows?

My other question is, when I replaced my iPod, does my warranty get renewed? Because the serial number on my new iPod says it expires in 2009, but the orginal box still serves as my receipt. (the box says it expires on the 29th)
Any warranty on a replacement iPod last for either 90 days, or the remainder of the original warranty whichever is the longer period.

Two questions re: X58 Eclipse SLI

Hi all -
two questions regarding my (admittedly older) X58 Eclipse SLI:
1.) When I built the system, I had two IDE DVD devices: one reader and one burner. I've since replaced the burner with a SATA burner but now I can't get Vista 64 to recognize the reader. I have the reader setup as 'Master' on the IDE bus and it does get identified when booting the system. Vista won't see it, though, even with the JMicron drivers installed.
2.) When I bought the board, I also bought an OCZ 1600 DDR3 kit (OCZ model# OCZ3P1600LV6GK). I FINALLY got the RAM stable at 1333MHz, but I've considered adding more RAM to the system. Am I likely to experience issues if all the RAM is not matched - especially considering I've had to customize the RAM voltage and timings?
any suggestions here would be greatly appreciated!
Mike

Quote from: PirateDog on 20-April-11, 06:31:10
It may be possibe that a firmware update is available from the device manufacturer that will make the drive compatible with Vista?
Possible, however I doubt that's the issue considering that the drive functioned normally prior to the removal of the 2nd (SLAVE) drive. To clarify, when both drives were attached to the PATA controller everything worked fine. When I went to a single drive, the OS no longer recognizes the MASTER device.

Two questions about Z77A-GD65

Hi.
4 days ago I bought MSI Z77A-GD65 motherboard. I dont have CPU/GPU yet. I checked the "compatibility chart" for my Patriot memory: (PXD38G1600LLK) and I found them there as "OK". I got two questions:
1. I found on this board that my RAM is not compatible with first bios, is it true?
2. Is there any way to check which bios do I have without a CPU/GPU ? (or all motherboards have a first bios installed ?)

Quote from: xmad on 26-August-12, 04:06:16
Like Bernhard says, I suggest leaving it alone until all your parts arrive. Then assemble the machine properly after reading the directions and see how it goes.
It very well may boot up just fine w/ even the old bios and allow you to flash. Then again you may have to borrow some different ram to flash, just wait and see.
Don't get your self all worked up before you even know if there is a problem. Have fun!
Ye, thanks I found this ram on compatibility chart, so I hope it'll be fine

TS3297 I'm trying to buy a song and it won't let me it keeps telling me to ask these two questions like what was my first pets name and what was my childhood nickname and I forget I need help please

I'm trying to buy a song and it won't let me a page keeps popping up telling me to answer these two questions like what was your first pets name and what was your childhood nickname and I forget the answers and it says I will be locked out of my apple id and I don't want that so can u please help me thanks

If you didn't establish a rescue email address, you will need to call applecare support. Ask for account security to reset your security questions. After the advisor is able to verify your identity, they can reset your security questions.
HTH.
If you are in the US, the number is 800-275-2273

Two questions about Risk Management 2.0

hi experts,
Please find below two questions about Risk Management:
-In SPRO, Risk Management>Create top node: after completing information and executing I have this error:
Error in the ABAP Application Program
The current ABAP program "/ORM/ORM_CREATE_TOP_NODES" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/ORM/SAPLORM_API_SERVICES " in
include "/ORM/LORM_API_SERVICESU10 " in
line 97:
"Bei PERFORM bzw. CALL FUNCTION "GET_ORGUNIT_THRESHOLDS" ist der Aktual"
"parameter "I_ORGUNIT_ID" zum Formalparameter "IV_ORGUNIT_ID" inkompati"
"bel."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "/ORM/ORM_CREATE_TOP_NODES" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
Do you know where it could come from?
-On the Portal>Risk Management
when I click in a link under the risk management menu(activities and risks, risk report, document risk,...) i alway have an internal server error:
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Do we have to set up some customizing points before accessing these links?
Thank you !
Regards,
Julien

Hi Julien ,
I have the same error what u described as :-
-On the Portal>Risk Management
when I click in a link under the risk management menu(activities and risks, risk report, document risk,...) i alway have an internal server error:
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Do we have to set up some customizing points before accessing these links? "
Are you able to solve this. Please let me know how to resolve this???
Thanks
Regards,
Atul

Got Mine. Two Questions

Similar Messages

Maybe you are looking for