GPShell - installing file .cap error 6985
Hi !!!
I am using
GPShell
Java Card Gemalto TOP IM GX4
script:
mode_201
gemXpressoPro
enable_trace
establish_context
card_connect
select -AID A000000018434D00
open_sc -security 3 -keyind 0 -keyver 0 -key 47454d5850524553534f53414d504c45
install -file C:\Users\Kar\workspace\_Transporte_JC\src\applets\javacard\applets.cap -sdAID A000000018434D00
card_disconnect
release_context
I've got this message, when i tried to load .CAP file into Java Card :
C:\Users\Karina>gpshell.exe
mode_201
mode_201
gemXpressoPro
gemXpressoPro
enable_trace
enable_trace
establish_context
establish_context
card_connect
card_connect
select -AID A000000018434D00
select -AID A000000018434D00
Command --> 00A4040008A000000018434D00
Wrapped command --> 00A4040008A000000018434D00
Response <-- 6F198408A000000018434D00A50D9F6E061291609505009F6501FF9000
open_sc -security 3 -keyind 0 -keyver 0 -key 47454d5850524553534f53414d504c45
open_sc -security 3 -keyind 0 -keyver 0 -key 47454d5850524553534f53414d504c45
Command --> 8050000008B60D52C464F836A200
Wrapped command --> 8050000008B60D52C464F836A200
Response <-- 4D008169000174850866FF019CA5C42738E5A0B7FA23EA1A31353EC29000
Command --> 8482030010FDBB3FE3F201C9250972FCEF58766DA1
Wrapped command --> 8482030010FDBB3FE3F201C9250972FCEF58766DA1
Response <-- 9000
install -file C:\Users\Karina\workspaceAndroid\_Transporte_JC\src\applets\javaca
rd\applets.cap -sdAID A000000018434D00
install -file C:\Users\Karina\workspaceAndroid\_Transporte_JC\src\applets\javaca
rd\applets.cap -sdAID A000000018434D00
Command --> 80E602001D0A0102030405060708090008A000000018434D000006EF04C60208F000
00
Wrapped command --> 84E60200283F72458FC3BB9C74FC680E0DB55CE54BC8E00E80C123BFB7BA
AFB950F2D0842502C7AC8A3F67301200
Response <-- 009000
Command --> 80E80000EFC48208E0010014DECAFFED01020400010A010203040506070809000200
1F0014001F002B001500BA0036048B001B00A600000213000A0002000B02030004001502030107A0
000000620101000107A000000062000103002B030B010203040506070809000301760B0102030405
06070809000202C80B01020304050607080900010036060036008003020002040400000043FFFFFF
FF004B008003010001040400000183FFFFFFFF018C0080030100010404000002D5FFFFFFFF02DE07
048B000510188C00041807900B3D0304383D0404383D0504383D0604388700188F00173D06078C00
248701AD01AD0003AD00
Wrapped command --> 84E80000F85200740D2270081C6B42B0CE2A5CE273B9AB3E8142EEED54AB
A4D975FEAB62647E87A5DB8D4E47E05AEF70E907585055C065F26104DD839ABC31EBE15F310927B6
74C7267895628578D3DFC9167DBC8BC86C5C1AACA174F94220AA33914C0C0A91092EA01BE42C4DC6
28DD916533979115D94B19F4466F06CF720E38AC0D315423DFCD0BC3CC663D2777EA6F64124E86D3
6A2619749C6C17F60280479E7C25F5CAA6EC2E49848B76DE5794EC8600E88E2066D363A37B0C12EF
AA8FBE60A5E299A39B592722525B790040069691A9596989DCB9A4C4B3F13E0E9528A3AC8EDC5E7B
8FB617C31C672BD126FA5D5385B0D27E1F6B45AA21080B
Response <-- 6985
load() returns 0x80206985 (6985: Command not allowed - Conditions of use not sat
isfied.)
There's message error :
install_for_load() returns 0x80206985 (6985: Command not allowed - Conditions of use not satisfied.
Please help me
Thanks for replying
Before I used to compile and convert JCDK 2.2.2
Now I'm using to compile JCDK 2.2.2 and to convert JCDK 2.1.2
But, now I get this message :
install_for_install_and_make_selectable() returns 0x80206A80 (6A80: Wrong data / Incorrect values in command data.)
mode_201
enable_trace
enable_timer
establish_context
command time: 31 ms
card_connect
command time: 141 ms
select -AID A000000018434D00
Command --> 00A4040008A000000018434D00
Wrapped command --> 00A4040008A000000018434D00
Response <-- 6F198408A000000018434D00A50D9F6E061291609505009F6501FF9000
command time: 890 ms
open_sc -security 3 -keyind 0 -keyver 0 -key 47454d5850524553534f53414d504c45 -k
eyDerivation visa2 // Open secure channel
Command --> 8050000008D8A7A6597AF2A89A00
Wrapped command --> 8050000008D8A7A6597AF2A89A00
Response <-- 4D008169000174850866FF015D31EE4A194F878F2EF11B91670965769000
Command --> 848203001097E072EA110C6362E46531272B838585
Wrapped command --> 848203001097E072EA110C6362E46531272B838585
Response <-- 9000
command time: 436 ms
delete -AID 01020304050607080900
Command --> 80E400000C4F0A0102030405060708090000
Wrapped command --> 84E4000018CC8AABCBF8F9613BD3F025C9B71D46839D221706C011D68D00
Response <-- 6A88
delete() returns 0x80206A88 (6A88: Referenced data not found.)
command time: 32 ms
delete -AID D1D2D3D4D5
Command --> 80E40000074F05D1D2D3D4D500
Wrapped command --> 84E4000010DCA92DD250B979B72100167F559E782300
Response <-- 009000
command time: 93 ms
delete -AID D0D1D2D3D4D50101
Command --> 80E400000A4F08D0D1D2D3D4D5010100
Wrapped command --> 84E400001833644C791C1A78809B1ED43E00BE93398AC1808C0254DC1300
Response <-- 6A88
delete() returns 0x80206A88 (6A88: Referenced data not found.)
command time: 31 ms
delete -AID D0D1D2D3D4D501
Command --> 80E40000094F07D0D1D2D3D4D50100
Wrapped command --> 84E400001800A1450E77025930767A487F93497F12B230B25712CAE0E200
Response <-- 6A88
delete() returns 0x80206A88 (6A88: Referenced data not found.)
command time: 32 ms
install -file C:\Users\Karina\workspaceAndroid\aaaa\src\app\javacard\app.cap -s
dAID A000000018434D00 -nvCodeLimit 4000
Command --> 80E602001805D1D2D3D4D508A000000018434D000006EF04C6020FB00000
Wrapped command --> 84E60200287F5A23CD3D94C9535230D1B1A8F593DB25DB45BDEE96F23FD6
887BBB0C6F3AC52AFD46D58AD411FB00
Response <-- 009000
Command --> 80E80000EFC482012B01000FDECAFFED010202000105D1D2D3D4D502001F000F001F
0000000B001600120027000A00090009006900000000000001000004000B01000107A00000006201
0106001200800300FF00040400000019FFFF0015001C070027000110188C0000188B00017A01308F
00028C00037A0110047800107A022018198C00047A00207A08000A000000000000000000000A0009
01000000020001000C05001600050680030003800301010000000600000106000024090009000000
05050406030F0B00690100010000000000000600810001000C0009000000000109000C0012000700
00000006010015001500
Wrapped command --> 84E80000F864B3562C2CBDBC6ED52D5F8FC77440275023E2C5ED6E78F69A
B59FF27F6D4248E6E2544490EEF12F984F9B147A9745F6D2EB3E9D630BD866AB2656AF34296A28D6
B288470F23801C688186D65C20EEC742CBD3855FED66D5B16D3BAC617599C2A6EFE5EA12D529A204
BA7EFD7BDDFC65FDE575CD0932890C626D5067ECAACC5037FE6ABC7D025BCED8CE3F2AF72738CC53
0860B7BDAB2F9A7CAF642AB301D2F5FEBE2BF4B7A5E0ABBE0F6D0511744C96E1FEE5F8AED41FF231
B5E05F1E8DC4426F35976917D046ABAE4523C1CB210FEC78BCAFD64B9FC6B1717919B31A0D7FE10C
EDB4DB7A5233C270324375ECD86096317C90567AC40261
Response <-- 009000
Command --> 80E8800140020000000004010019000C0001000000000701001C000E000600000000
FF020024000E0001000000000005000C000CFFFF000C000E0110066800A104B431012000
Wrapped command --> 84E88001501D9E52731C969363CE60851847352C08FEEE87AE43DFF6A9E4
FB8F6FACD5238A8C0B1A5AB2AC89EC7BEA35D6714134E29DB08CD0CE7832F9589C01B231516B12F8
0F538AE4E03D99DEEA9E69A5C1EF9200
Response <-- 009000
Command --> 80E60C000E05D1D2D3D4D50000010002C9000000
Wrapped command --> 84E60C00186C7CCD2C269CCCAAD6018CA7A3CC2A0E52CCAC8DD2BDD4F100
Response <-- 6A80
install_for_install_and_make_selectable() returns 0x80206A80 (6A80: Wrong data /
Incorrect values in command data.)
Similar Messages
-
Wrong CAP file version error message
I'm trying to write a loader application that will send a CAP file into JavaCard, and then install it automatically.
I have developed my JavaCard Applet by using Eclipse3.1.0 and JCOP30.
After running my JavaCard Applet by Eclipse, I got its CAP file in folder [b\bin\FVSCardPkg\javacard\[/b]
But when I run my loader application with this CAP file, the error message will display:
EX: msg Wrong CAP file version, class class com.ibm.jc.JCException
Wrong CAP file version
at com.ibm.jc.CapFile.parseHeader(Unknown Source)
at com.ibm.jc.CapFile.readCapFile(Unknown Source)
at com.ibm.jc.CapFile.<init>(Unknown Source)
at LoaderPkg.loader.load(loader.java:35)
at LoaderPkg.loader.main(loader.java:20)
This is my loader application source code:
import java.io.*;
import com.ibm.jc.*;
import com.ibm.jc.terminal.*;
* Sample /**
* Sample loader. Demonstrates how to use the offcard API to download
* a cap-file on a JCOP41V22 Engineering sample card and listing of applets loaded will
* follow.
public class loader{
private final static String termName = "pcsc:4"; // Real card
// private final static String termName = "Remote"; // Simulator
protected static final byte[] JCOP_CARD_MANAGER_AID = { (byte) 0xa0, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00};
protected static final byte defaultInstallParam[] = { -55, 0 };
static String[] capFileName={"D:/MyCardPkg.cap"};
public static void main(String[] args){
try{
loader l = new loader();
l.load();
}catch(Exception e){
System.err.println("EX: msg " + e.getMessage() + ", class " + e.getClass());
e.printStackTrace(System.err);
System.exit(0);
//Likewise for simulation, be patient the port takes time to close.
//Use command line "netstate" to check the disapperance of the port before
// activating JCShell command to read the simulated card.
private loader(){}
private void load() throws Exception{
CapFile capFile = new CapFile(capFileName[0], null);
System.out.println("Package name: " + capFile.pkg);
byte[][] applets = capFile.aids;
if ((applets == null) || (applets.length == 0)){
throw new RuntimeException("no applets in cap file");
// Get connection to terminal, take note that jcop.exe is required to be activated
// in simulation mode.
System.out.println("Open terminal ...");
//Make sure that the simulator jcop.exe is activated before unmarking this satement
//Remember to delete the downloaded applet before running otherwise error is
//expected if the simulator finds the existence of the applet with the
//same pakage name ID and AID
//Issue /close command at "cm" prompt if the card is in use,, ie it should
//have "-" prompt. Be patient that the port takes time to close. Use command line
//"netstate" to check the disapperance of the port before running.
// pcsc:4=Card Terminal Or Remote=LocalHost Terminal
JCTerminal term = JCTerminal.getInstance(termName, null);
//For real JCOP41V22 card, please unmark this statement and delete the downloaded
//applet before running. Error expected if the card finds the existence of the applet
//with the same pakage name ID and AID
//Issue /close command at "cm" prompt if the card is in use,, ie it should
//have "-" prompt.
term.open();
// Add in this statement for real card which requires some response time
term.waitForCard(5000);
// Create a logging terminal spitting out the APDUs on standard out
TraceJCTerminal _term = new TraceJCTerminal();
_term.setLog(new PrintWriter(System.out));
_term.init(term);
term = _term;
// Get JavaCard representative, passing NULL resets card and returns ATR
System.out.println("Get card ...");
JCard card = new JCard(term, null, 2000);
// Get the off-card representative for the card manager and use it to
// select the on-card CardManager
System.out.println("Select card manager ...");
CardManager cardManager = new CardManager(card, CardManager.daid);
cardManager.select();
// For downloading something, we have to be authenticated to card manager.
// For this, the keys must be set. The keys to use should of course
// be configurable as well.
byte[] dfltKey = c2b("404142434445464748494a4b4c4d4e4f");
cardManager.setKey(new OPKey(255, 1, OPKey.DES_ECB, dfltKey));
cardManager.setKey(new OPKey(255, 2, OPKey.DES_ECB, dfltKey));
cardManager.setKey(new OPKey(255, 3, OPKey.DES_ECB, dfltKey));
cardManager.setKey(new OPKey(1, 1, OPKey.DES_ECB, c2b("707172737475767778797a7b7c7d7e7f")));
cardManager.setKey(new OPKey(1, 2, OPKey.DES_ECB, c2b("606162636465666768696a6b6c6d6e6f")));
cardManager.setKey(new OPKey(1, 3, OPKey.DES_ECB, c2b("505152535455565758595a5b5c5d5e5f")));
System.out.println("init Update ...");
cardManager.initializeUpdate(255,0);
System.out.println("Authenticate to card manager ...");
cardManager.externalAuthenticate(OPApplet.APDU_CLR);
// And load the cap-file, do not forget to call installForLoad
System.out.println("Loading cap-file ...");
byte[] cardManagerAid = cardManager.getAID();
cardManager.installForLoad(capFile.pkgId,0, capFile.pkgId.length, cardManagerAid, 0, cardManagerAid.length, null, 0, null, 0, 0, null, 0);
cardManager.load(capFile, null, CardManager.LOAD_ALL, null, cardManager.getMaxBlockLen());
byte[] capaid = capFile.aids[0];
System.out.println("Finished loading !");
// Install applet, we try to install the first applet given in the
// cap file, and try to instantiate it under the same AID as given for its
// representation in the cap file. No installation data is passed.
System.out.println("Installing applet ...");
cardManager.installForInstallAndMakeSelectable(capFile.pkgId, 0, capFile.pkgId.length, capaid,0, capaid.length, capaid, 0, capaid.length, 0, defaultInstallParam, 0, defaultInstallParam.length, null, 0);
System.out.println("Install succeeded!");
// synchronize state with on-card card manager
System.out.println("Update!");
cardManager.update();
// Print information regarding card manager, applets and packages on-card
JCInfo info = JCInfo.INFO;
System.out.println("\nCardManager AID : " + JCInfo.dataToString(cardManager.getAID()));
System.out.println("CardManager state : " + info.toString("card.status", (byte) cardManager.getState()) + "\n");
//Echountered error 6A 86 with this statement:Object[] app = cardManager.getApplets(CardManager.GET_APPLETS,
//CardManager.CVM_FORMAT_HEX, true);
//Solved the bug by playing the integers in arg0 and arg1.
Object[] app = cardManager.getApplets(1, true);
if (app == null) {
System.out.println("No applets installed on-card");
} else {
System.out.println("Applets:");
for (int i = 0; i < app.length; i++) {
System.out.println(info.toString("applet.status", (byte) ((OPApplet) app).getState()) + " " + JCInfo.dataToString(((OPApplet) app[i]).getAID()));
// List packages on card
// Encountered error with this statement:Object[] lf = cardManager.getLoadFiles(CardManager.CVM_FORMAT_HEX, true);
// Solved the bug by setting arg0 = 0,
Object[] lf = cardManager.getLoadFiles(true);
if (lf == null) {
System.out.println("No packages installed on-card");
} else {
System.out.println("Packages:");
for (int i = 0; i < lf.length; i++) {
System.out.println(info.toString("loadfile.status", (byte)((LoadFile) lf[i]).getState()) + " " + JCInfo.dataToString(((LoadFile) lf[i]).getAID()));
term.close();
static String numbers = "0123456789abcdef";
private byte[] c2b(String s) {
if (s == null) return null;
if (s.length() % 2 != 0) throw new RuntimeException("invalid length");
byte[] result = new byte[s.length() / 2];
for (int i = 0; i < s.length(); i += 2) {
int i1 = numbers.indexOf(s.charAt(i));
if (i1 == -1) throw new RuntimeException("invalid number");
int i2 = numbers.indexOf(s.charAt(i + 1));
if (i2 == -1) throw new RuntimeException("invalid number");
result[i / 2] = (byte) ((i1 << 4) | i2);
return result;
How to solve this problem?
Thank you in advance.I'm not understanding if your cap file is in "b\bin\FVSCardPkg\javacard\", then why are you loading "D:/MyCardPkg.cap"?
The issue isn't with your off card application, but the cap file version. Look at the cap file components in JCVM specification. I believe it's the Header component. The major, minor should match your card but not greater. In other words, your can't load a 2.2 on a 2.1 card, but a 2.1 can load on a 2.2 -
I am trying to install MasterCollection_CS6_LS16. When I double click the install file I get this error message: We've encountered the following issues. Installation on case-sensitive volumes is not supported. Please choose a different volume for installation. What does that mean? How should I proceed?
Hey iraravitz,
Could you please let me know what version of OS are working on.
You might receive this error when you attempt to install on a drive with the HFS+ Case Sensitive file system, which is not supported for installation of Adobe Creative Suite 6.
So, please try installing on a drive that has been formatted with a supported file system.
You might refer the KB doc link mentioned below for the same:
Error "Case-sensitive drives not supported" or similar install error | Mac OS
Let me know if this helps.
Regards,
Anubha -
When i try to install iPlanet App Server on NT, I do not get screen to enter license key valid for evaluation.
Also during installation screens an error window is displayed saying "cache File Read error -- Could not read ProductKey entry from the cache file "Hi,
I also get the following message:
"Could not read ProductKey entry from the cache file"
I have no idea how to provide the installation software with the key. I also tried "keycheck.exe"
Do you have a solution for this problem? Did you finish the installation?
Christian -
m was fine. I keep getting the underlying task reported failure on exit when trying to do disk permission or repair permissions. Also get cant install files in "/applications error when ever trying to install a driver or update. Help
Hi,
Here's an article for that:
http://support.apple.com/kb/ts1901 -
I've found that lot of packages have this error.
In the .install file the follow line:
update-mime-database usr/share/mime > /dev/null 2>&1
should be:
update-mime-database /usr/share/mime > /dev/null 2>&1
because if you are not in the / root when you use pacman the mime type aren't updated correctlybash wrote:
gspe wrote:
So, just for curiosity why in the same .install file there is one call with / and one call without /
gtk-update-icon-cache -f -q /usr/share/icons/hicolor
update-desktop-database -q
update-mime-database usr/share/mime > /dev/null 2>&1
That's a bug. The first '/' should be removed. We are slowly fixing them.
Thanks for your reply.
Now everything it's more clear -
Error installing Adobe Muse. Install file is damaged.
How do I get to a new, non-damaged version of the trial download install file for Muse? (I am installing on an iMac desktop and successfully downloaded and installed a trial version of Dreamweaver CS6 yesterday.)
Hi,
I am trying to install MUSE on a MAC (Mountain Lion), I have the latest Air, but still receive the installer has been misconfigured message.
I dowloaded MUSE months ago, but never started my trial.
Today (and from today onwards) I need to get involved with Muse and use it for a couple of websites that I need to design.
I activated my 30 day trial today, but I got a splash screen saying there is a new version available.
When I pressed install, I got this error again. Then I tried to download the installation files from Adobe website, by logging in with my ID, same error popped up. My current Muse's version info is below.
What would you suggest? -
I've got a user running:
AnyConnect 3.1.01065
on
Windows 7 64bit.
Several weeks ago she started encountering the following error:
-after logging into Windows and launching the AnyConnect client, she enters her username and password and successfully authenticates.
-the connection is not established and she's presented with the following message: "Failed to install AnyConnect VPN Profile because of file move error. A VPN connection cannot be established."
After doing some troubleshooting, inlcuding uninstalling/reinstalling the anyconnect client, it seems the culprit is the following file:
C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile\<filename>.xml. When the problem occurs (which is not regularly, sometimes it occurs daily, sometimes just once a week) examining that file indicates it has no security or permissions set. Quitting the AnyConnect software, modifying the file so that the user has full control of it, then relaunching AnyConnect fixes the problem (until it happens again). Uninstalling, and making sure to move C:\ProgramData\Cisco to the trash, then reinstalling did not seem to help.
The closest match in these forums is the following thread, https://supportforums.cisco.com/message/3760446 - though no clear resolution was given.
Has anyone else encountered this, and been able to fix it?
Thanks much.Just FYI, it seems at least in this case, purging all the previous system restore points seems to have resolved this issue...
-
I'M GETTING THE FOLLOWING ERROR
Installer was unable to access a critical file/directory. Please try installing again.(Error code: 43) Contact Customer SupportError downloading Creative Cloud applications
-
Installer was unable to access a critical file/directory. Please try installing again.(Error code: 43) Contact Customer Support
Any ideas?Hi Serpent,
Try the following Steps:
open activity monitor and close all Adobe related applications
navigate to: /Library/Application support/Adobe
In that directory you will see a folder named OOBE - Rename that folder to OOBEold
Navigate to: MAC HD /Application/Utilities directory
In there you will see a folder called "Adobe Application Manager" - delete it
Download the Adobe Cleaner Tool from here: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems/_jcr_conte nt/main-pars/accordion_container_1/accordion-par/accordion-item-1/accordion-item-par/proc e dure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleanerTool.zip
Open the Cleaner Tool and choose to clean "Creative Cloud" only.
Download and install Creative Cloud again - https://ccmdls.adobe.com/AdobeProducts/KCCC/1/osx10/CreativeCloudInstaller.dmg
Regards,
Rave -
Installer was unable to access a critical file/directory. Please try installing again. Error code 49. Tried multiple times. get the same error code, which gives no helpful info. "Support" just sends me in a circle, never getting to anything actually helpful.
Launch Photoshop CC 2014 application from C: > Program Files > Adobe > Adobe Photoshop CC 2014.
Once the Photoshop CC 2014 application is launched , click on Help menu.
Select Updates option.
Once the Updates are listed , close Photoshop cc 2014 and Creative Cloud application .
Then click on Update button and try to update . -
Windows File Protection error when installing 9i client
While installing the 9i client I am getting a Windows file protection error message on all 5 of the test machines.
If I cancel out of the message the install finishes correctly and everything seems to function properly.
However, it is prety counterintuitive to have to cancel out of the message when we are wanting to do these installs in silent mode.
Anyone else have this problem, or any ideas on fixing?nm, fixed it myself.
The Oracle install was replacing regsvr32.exe with an old version. When WFP detects a file protection problem, it first looks at the %systemroot%\system32\dllcache dir for a known good copy of the file to restore. If it doesn't find one in there, then it pops the dialog up and asks for a CD. If it does find one then it silently restores it in the background.
So, now at the beginning of my script I have a script checking the dllcache dir for regsvr32.exe, if it is there it moves on to the install, if it is not then it copies the one from their current system32 dir into the system32\dllcache dir. That way when Oracle replaces it WFP will silently restore their previous version.
-C -
Upload external cap file: jcshell: Error code: 6a80 (Wrong data)?
Hi,
i use eclipse + NXP JCOP Plugins_Generic3.2.8_Target ,the card is jcop31v232.
if the cap file is generated by eclipse project , when i upload exteral cap file ,no error
but if the cap file is generated by converter command ,there is error
what error?help me
cm> /terminal "winscard:4|Feitian R502 Contact Reader 1"
--Opening terminal
/card -a a000000003000000 -c com.ibm.jc.CardManager
resetCard with timeout: 0 (ms)
--Waiting for card...
ATR=3B FA 13 00 00 81 31 FE 45 4A 43 4F 50 33 31 56 ;.....1.EJCOP31V
32 33 32 93 232.
IOCTL().
ATR: T=1, FI=1/DI=3 (93clk/etu), N=0, IFSC=254, BWI=4/CWI=5, Hist="JCOP31V232"> => 00 A4 04 00 08 A0 00 00 00 03 00 00 00 00 ..............
(104154 usec)
<= 6F 65 84 08 A0 00 00 00 03 00 00 00 A5 59 9F 65 oe...........Y.e
01 FF 9F 6E 06 47 91 73 51 2E 00 73 4A 06 07 2A ...n.G.sQ..sJ..*
86 48 86 FC 6B 01 60 0C 06 0A 2A 86 48 86 FC 6B .H..k.`...*.H..k
02 02 01 01 63 09 06 07 2A 86 48 86 FC 6B 03 64 ....c...*.H..k.d
0B 06 09 2A 86 48 86 FC 6B 04 02 15 65 0B 06 09 ...*.H..k...e...
2B 85 10 86 48 64 02 01 03 66 0C 06 0A 2B 06 01 +...Hd...f...+..
04 01 2A 02 6E 01 02 90 00 ..*.n....
Status: No Error
cm> set-key 255/1/DES-ECB/404142434445464748494a4b4c4d4e4f 255/2/DES-ECB/404142434445464748494a4b4c4d4e4f 255/3/DES-ECB/404142434445464748494a4b4c4d4e4f
cm> init-update 255
=> 80 50 00 00 08 A7 C7 04 88 8C 87 3F DE 00 .P.........?..
(68417 usec)
<= 00 00 93 36 01 29 05 95 13 05 FF 02 00 5F E1 48 ...6.)......._.H
67 60 FD 2F 89 FF AD A4 72 B4 17 E9 90 00 g`./....r.....
Status: No Error
cm> ext-auth plain
=> 84 82 00 00 10 17 6D 1C 2A 87 9E 0A 24 3F 15 83 ......m.*...$?..
A4 84 10 C0 75 ....u
(71713 usec)
<= 90 00 ..
Status: No Errorh1.
cm> upload -d "D:\JCIDE_workspace\hello\hello\javacard\hello.cap"
=> 80 E6 02 00 12 05 A0 00 01 00 62 08 A0 00 00 00 ..........b.....
03 00 00 00 00 00 00 00 ........
(56499 usec)
<= 00 90 00 ...
Status: No Error
=> 80 E8 00 00 FF C4 82 01 A1 01 00 0F DE CA FF ED ................
01 02 04 00 01 05 A0 00 01 00 62 02 00 1F 00 0F ..........b.....
00 1F 00 0B 00 15 00 2E 00 0C 00 63 00 17 00 12 ...........c....
00 00 00 6F 00 02 00 01 00 0A 02 01 00 04 00 15 ...o............
02 03 01 07 A0 00 00 00 62 01 01 00 01 07 A0 00 ........b.......
00 00 62 00 01 03 00 0B 01 07 A0 00 01 00 62 03 ..b...........b.> 01 00 08 06 00 0C 00 80 03 00 FF 00 07 01 00 00 ................
> 00 1C 07 00 63 00 01 10 18 8C 00 00 7A 05 30 8F ....c.......z.0.
> 00 01 3D 8C 00 02 18 1D 04 41 18 1D 25 8B 00 03 ..=......A..%...
> 7A 02 21 18 8B 00 04 60 03 7A 19 8B 00 05 2D 1A z.!....`.z....-.
> 04 25 75 00 10 00 01 00 30 00 09 18 19 8C 00 06 .%u.....0.......
> 70 08 11 6D 00 8D 00 07 7A 05 21 19 8B 00 05 2D p..m....z.!....-
> 7B 00 08 03 1A 03 7B 00 08 92 8D 00 09 3B 19 03 {.....{......;..
7B 00 08 92 8B 00 0A 7A 08 00 17 00 02 00 01 00 {......z........
01 03 00 0A 48 65 6C 6C 6F 57 6F 72 6C 64 00 00 ....HelloWorld..> 00 00 05 00 2E 00 0B 06 80 03 00 01 00 00 00 06 ................
> 00 00 01 03 00 .....
>(1200 msec)
<= 6A 80 j.
Status: Wrong data
jcshell: Error code: 6a80 (Wrong data)
jcshell: Wrong response APDU: 6A80thank you. I use jcdk 2.2.1,jcop31v232 supports jc2.2.1 and gp2.1.1
And i can not understand this:
your jcop card is not a javacard v3 card.
cm> /cap-info -p "D:\JCIDE_workspace\hello\hello\javacard\hello\hello" "D:\JCIDE_workspace\hello\hello\javacard\hello.cap"
jcshell: Cannot read file <D:\JCIDE_workspace\hello\hello\javacard\hello.cap>: Incomplete CAP file, missing mandatory component: Header.capbut there is Header.cap in hello.cap:
hello/javacard/Header.cap :
01 00 13 de ca ff ed 01 02 04 00 01 09 a0 00 01
00 62 03 01 0c 02 -
Download the latest version adobe reader but one of the file is error cannot finish installing ,help
Download the adobe reader the latest version but one of the file is error , cannot finish installing , please help .
Mac or Win? From where are you trying to download Reader? In any case,
you can try downloading the full offline Reader installer from
http://get.adobe.com/reader/enterprise/ -
On startup CC tells me to install an update. It downloads to 5% and then brings the message: "installation-program couldn't get access to critical file/folder. Try installing again. Error code 42". Any advice?
1st, you must be using an account with Administrator privledges
Please read https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html
Maybe you are looking for
-
HT201250 Can I shut down my mac in the middle of a time capsule backup?
If I shut down my mac when time capsule is processing a backup, will it cause any problems?
-
Urgent - JSP error in JDev 3.1 under NT 4.0
Hi, I have an error in the .jsp file(code below). I already defined the bean called FaqBean. But, from the JSP file, it can't recognize the bean. Can you please tell me what I'm doing wrong? Thanks in advance, Kaiser <%@ page import="com.taglib.wdjsp
-
Forcing created by field to use alias name
Hi, How can I modify User Profile Service in SharePoint 2007, so that "Created by" field uses "domain\user" as opposed to fullname in the created by field or any hidden person field like "modified by". Thanks
-
Setting up iPad, don't know what to select for security; WEP, WPA, WPA2, WPA Enterprise or WPA2 Enterprise. We have service through Charter cable. Thanks for your help!
-
Assignments missing in Timesheets
Hello, I want to test Approvals with or without Rules. So I created a small project with 4 tasks and a resource on each task. Until today, the Timesheets worked fine in this environment: Project Sever 2013 on prem. Today the new project and assignmen