Gr based iv where miro done

Dear Forum,
I have another 2 scenario to seek advice.
1) gr based iv is ticked in PO.
if GR made already and invoice also posted, i make another miro posting with reference to the same PO, may i know line item where quantity and value field editable? with or without figures?
2) gr based iv no tick in PO.
if GR made already and invoice also posted, i make another miro posting with reference to the same PO, may i know line item where quantity and value field editable? with or without figures?
Thanks
Rgds

Hi,
1)gr based iv is ticked in PO.
if GR made already and invoice also posted, i make another miro posting with reference to the same PO, may i know line item where quantity and value field editable? with or without figures?
qty and value field will be editable but without figures.
2) gr based iv no tick in PO.
if GR made already and invoice also posted, i make another miro posting with reference to the same PO, may i know line item where quantity and value field editable? with or without figures?
qty and value field will be editable but without figures.
Raj

Similar Messages

  • Is there a way to move music I had on my iPhone 4 to my new macbook air, using iTunes it seems to want to synch to iTunes library where I don't have any music stored?

    is there a way to move music I had on my iPhone 4 to my new macbook air, using iTunes it seems to want to synch to iTunes library where I don't have any music stored?

    Hello KM47,
    It soundsl ike you are needing to copy your iTunes purchases to your computer rather than sync it at this point. You can use the following article to transfer your purchases with the following article:
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    http://support.apple.com/kb/ht1848
    If you have your library stored on another computer, you can also copy the library to the new MacBook Air with this article:
    iTunes: How to move your music to a new computer
    http://support.apple.com/kb/ht4527
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Can I rent a movie in iTunes and then watch it in my car where I don't have an Internet connection?

    Just wondering how to download a movie on the iPad and then take it in the car or on a plane and watch it... Is it possible to rent a movie on iTunes and then watch it elsewhere, where I don't have access to Internet?

    Absolutely.  You can rent or buy a movie in iTunes and once downloaded to your iPad, watch it without internet access.  You can do this directly on your iPad.  Open iTunes on your iPad.  Browse, then buy or rent what you want.  Once downloaded, your purchase will appear in your Video App, which was preloaded on your iPad.

  • Can I change the time format of incoming mails, in Mail? Now I have AM/PM, but I live in Denmark where we don't use that format. We have a 24-hour clock format i.e. 14:52 instead of 2:52 PM.

    Can I change the time format of incoming mails, in Mail? Now I have AM/PM, but I live in Denmark where we don't use that format. We have a 24-hour clock format i.e. 14:52 instead of 2:52 PM.

    Is the time format of your Mac in 24 hour?

  • I have several online accounts where I don't want the online Id and password saved, how do I do this?

    I have several online accounts where I don't want the online Id and password saved, how do I do this?

    *Click the (empty) input field on the web page to open the drop down list
    *Highlight an entry in the drop down list
    *Press the Delete key (on Mac: Shift+Delete) to remove it.
    *Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
    *http://kb.mozillazine.org/Deleting_autocomplete_entries
    See also Password Manager
    *http://kb.mozillazine.org/Password_Manager

  • HT5446 if i order a new imac with 1tb flash is that pcie based to where i could add a 3.5 ssd and does it still have the bracket and sata cable to add one in it

    if i order a new imac with 1tb flash is that pcie based to where i could add a 3.5 ssd and does it still have the bracket and sata cable to add one in it

    Be advices that the newest iMac's are basically SEALED Units and taking it apart in any way, other than removing the Memory slot cover to add more RAM (That is on the 27" model. The 21.5" is completely sealed), will void the warranty on it.
    Not only that but the screen is Glued to the aluminum casing and if you do pry it off with damaging it you'll need new adhesive strips to remount it.
    Not worth the efford or the cost when you can buy mat any other brand computer for less money and do all the upgrading you would ever want without ever voiding the warranty or breaking something in the process.

  • Does Apple have anything like Microsoft's OneNote (where I don't have to use a cloud server)?

    Does Apple have anything like Microsoft's OneNote (where I don't have to use a cloud server)?

    Rob, others,
    For CS6 (as for CS5 and CS5.5), registration with Adobe forms part of activation, so none of them can be run without Adobe having your registration number.
    So they must have it, and you must be able to get it, through your Adobe ID, or if that has changed through some other information such as name, email address, or something.
    You should be able to get help one of these places if needed,
    Serial number and activation support (non-CC, chat open between 5AM and 7PM PST/PDT on workdays)
    http://helpx.adobe.com/x-productkb/global/service1.html
    Adobe ID and registration support (non-CC, chat open between 5AM and 7PM PST/PDT on workdays)
    http://helpx.adobe.com/x-productkb/global/service-c1.html
    Adobe Support (phone),
    http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html
    or I can alert a forum staff friend that may alert the right someone to deal with it.

  • Gr based iv in miro

    Dear Forum,
    I have 2 scenario to seek advice.
    1) gr based iv is ticked in PO.
    if GR not made yet, during miro with reference to PO, line item not editable and grey out, correct?
    2) gr based iv is ticked in PO.
    if GR made already, during miro with reference to PO, line item where quantity and value field are editable with figures. correct?
    3) gr based iv is ticked in PO.
    if GR made already and invoice also posted, during miro with reference to the same PO, line item where quantity and value field not editable with figures. correct?
    4) gr based iv no ticked in PO.
    if GR not made yet, during miro with reference to PO, line item where quantity and value field editable and empty, correct?
    5) gr based iv no ticked in PO.
    if GR made already, during miro with reference to PO, line item where quantity and value field are editable with figures. correct?
    6) gr based iv no ticked in PO.
    if GR made already and invoice also posted, during miro with reference to the same PO, line item where quantity and value field not editable with figures. correct?
    Thanks

    Hi,
    1) gr based iv is ticked in PO.
    if GR not made yet, during miro with reference to PO, line item not editable and grey out, correct?
    Yes.
    2) gr based iv is ticked in PO.
    if GR made already, during miro with reference to PO, line item where quantity and value field are editable with figures. correct?
    yes, with the default qty and field for how much GR is done.
    3) gr based iv no ticked in PO.
    if GR not made yet, during miro with reference to PO, line item where quantity and value field editable and empty, correct?
    Yes
    4) gr based iv no ticked in PO.
    if GR made already, during miro with reference to PO, line item where quantity and value field are editable with figures. correct?
    Yes
    Raj
    Edited by: Raj on May 4, 2010 2:44 PM

  • Report to see MIRO done , MIGO pending

    Is there any report to see POs where MIGO is done but MIRO is pending
    Regards
    Shrey

    Hi,
    In report ME2N, ME2M, ME2L,
    For pending migo,
    select input selection Parameter  as a 'WE101'
    For pending miro,
    select input select Parameter as a RECHNUNG.
    Regards,
    Anisha

  • How can I get a representative to help me with my Apple ID when I live in China (where I don't speak or read the language) and I created it in Canada (where I used to live)?

    I explained to Kavitha from the iTunes Store Customer Support the following information:
    - my home country is Canada
    - I am an English speaker
    - I currently live in China, but I don't read or speak Chinese
    - my Apple ID was created in Canada
    - my husband bought me a new iPad last Sunday in China where we live
    - I couldn't remember the answers to my security questions, so I followed Apple instructions to reset it by adding a rescue email address to my Apple ID
    - I have received no email message in the inbox for my rescue email address as promised to help me reset my security questions for my Apple account
    - I updated the email address for the Apple ID (the login) and, for some reason, my old Apple ID is still showing up on my new iPad when I try to sign in
    - you told me to select the website of the country that I live in (which is China - I've already explained this) and therefore directed me to a Chinese website which I CANNOT read
    - I was NOT asking Kavitha about how to change the language on my new iPad and she sent me an article about resolving that type of issue in error
    - I can't choose Canada as my country because I don't live there ANYMORE and I don't have a Canadian phone number anymore
    - I have a Chinese phone number because I LIVE in China
    Response from Kavitha:
    - she can't help me 
    - advised me to select the website of the country that I live in which is China (I already explained this) and therefore directed me to a Chinese website which I CANNOT read
    - not helpful
    - also, I can't schedule a call using China as the country associated with my Apple ID because everything will be in Chinese and a Chinese representative who I will NOT be able to understand will call me
    Can anyone at Apple help me????

    Only Apple Account Security could help at this point. You can try calling Apple Support in Canada - you'll have to find one of the several ways, such as Skype, to call an 800 number from outside of the relevant country - and ask for Account Security and see if they can help. Or you can find a friend who speaks Chinese and ask them to help you talk to Apple Support in China. There are really no other options that I know of.
    Note, by the way, that these are user-to-user support forums. You aren't speaking with Apple when you post here.
    Regards.

  • Selection of usage decision based on % of rejection done thorugh Insp Lot

    My business scenario is as follows:-
    I have created new usage decision codes as mentioned below through QS41and assigned the same to code group RI-UD and catalog 03. 
    I3     INITIAL REJECTION >75% to <=100 % (1) 
    I4     INITIAL REJECTION >50% to <=75% (40)
    I5     INITIAL REJECTION >25% to <=50% (60)
    I6     INITIAL REJECTION <=25% (80)
    and quality score maintained the same through QS51
    Code Group     Code     Shot Text for a code                                               Code Valuation         Quality Score
    RI-UD     I3     INITIAL REJECTION >75% to <=100 % (1)     R Rejected (not OK)     1
    RI-UD     I4     INITIAL REJECTION >50% to <=75% (40)     R Rejected (not OK)     40
    RI-UD     I5     INITIAL REJECTION >25% to <=50% (60)     R Rejected (not OK)     60
    RI-UD     I6     INITIAL REJECTION <=25% (80)                          R Rejected (not OK)     80
    I need to automate the selection of usage decision code to be done by system based on the accepted/rejected quantity entered.
    How to go about it.  Can anybody on this please?
    Thanks in advance.
    Ravi

    Anything can be done SAP!   But what you want would be all custom.  There is no SAP functionality that would do that for you.  I'd start with the auto UD program first.  Have the programmers modify the selection parameters to select the list of lots.  Than process those lots with the logic you want o use and change the UD accordingly.  I'd make sure I could run the program manually as well.  Similar to some of the other UD workload programs.
    FF

  • Posting files based on the changes done.

    Hello Experts,
       I am having a requirement where there will be a selection screen and the user will select a day or a week. I need to pull all the data that got changed or createed in the system for that particular date/ dates and place the relevant data in the application server. I do know that there are CDPOS and CDHDR tables where in the changes are tracked. For my case i have to track the changes that are done for the article. How can i get the records that got changed/created on articles.
        Please let me know how to relate the table data (MARA) with these change tables Object ID and Object Class.  Please let me know if there is any better way to do this.
    Thanks & Regards,
    Uday S.

    Object class (OBJECTCLAS) is 'MATERIAL'. Object value (OBJECTID) is always the table initial key. For MARA the object key is the client + material number.

  • Third party items are not invoiced totally though the MIRO done for all

    Hi Gurus,
    I have a third party sales order with 3 item lines.
    All these three items are delivered to the customer by the vendor and invoice verification MIRO also done for all three.
    Now when the order related invoice creation background job run and invoice created for this order is missing the first line item in the invoice. I cant understand what is the problem with first item line? Order is now not in the invoice due list also. manually invoice creation also gives the log that the order is completely invoiced. But when we see the document flow for item line 1 it says the item line is yet open and not invoiced.
    suggest me as the invoice posting is required for this item line also. suggest all the possible reasons.
    regards,
    Sandesh

    Hi Navneetha,
    Thanks for d reply.
    I hv checked d mentioned tables and Itm Categories nothing is +ve there. All 3 itms hv TAS itm category. Also I agree with ur MIRO statement.
    I found one thing which might b d cause plz check.
    As we knw dat we cant change the schedule ln date and quantity once the Pur. Requisition created. and we cant make changes in sales order itm line if the PO is created for that Pur. Requisition. Bcoz afteward the PO wont be updating  the Pur Requsition and sales order automatically.
    But here the schedule line date at d schedl ln category for itm 2 is changed by a certain Batch job after the PO cration.
    Therefore I think this wd b d reason that the item line 2nd is not getting updated in sales order from the PO and looks open.
    The change of schedule line dates is not maintained in the PO manually ever.
    So would it b d reason for the inconsistent doc flow updates and 2nd item being open as not invoiced yet?
    regards,
    Sandesh

  • Selecting Records from one table where records don't exist in a linked table

    Post Author: RMC
    CA Forum: Crystal Reports
    Tables:
    Stock (Main Table)
    Transactions (Left Outer Join)
    Criteria:
    Select all items with no transactions between a selected date range.
    The items will exist in Main table but I want to select all items that haven't been in a transaction between a date range so I can identify no movement with stock items just sitting in the database doing nothing.
    Any suggestions??

    Post Author: yangster
    CA Forum: Crystal Reports
    Sorry for the delay.  Dam meetings all day yesterday.You are essentially looking for something that doesn't exist in the db so you need to look at it from a different approach.You definitely don't want to use a full outer join.  From what i can tell from your description above you are looking for stocks that are inactive/idle.So you need not look at data that doesn't exist but the last activity date.So you'd want something along the lines ofselect s.stock_name, s.stock_blah, max(t.transaction_date) Transaction_datefrom stocks sjoin transactions t on s.itemid = t.itemidwhere whatever restrictions you need to addgroup by s.stock_name, s.stock_blahthis will produce one record for each stock you have in the stock table showing you only the last date of activityput that in a command in crystalin the selection expert in crystal reports put in a simple criteriatransaction_date <= some datethis will only pull in records based on your date selection so if you say give me all records from dec 31, 2006  you will know all the records being pulled in are stocks that have been idle since dec 31, 2006 or earlierlet me know if this doesn't work

  • Update 1 column,1 single table based on where results of multiple tables

    I would like the my_id column in 1 table updated to the static value of 247 for my_id stored in the 1 single table based on the where clause, which uses the my_id column in it.
    The update statement updates all rows in table1, instead of just the rows where
    the condition ( (b.my_id=a.my_id)
    and ( b.my_name like 'OIS SrClerk%')
    and (a.f_id=m.f_id)
    and (trunc(m.cr_time) < '02-Apr-2008')) is true
    What needs to be changed?
    update table1 a
    set a.my_id=247
    from table1 a, table2 b, table3 m
    where
    (b.my_id=a.my_id)
    and ( b.my_name like 'OIS SrClerk%')
    and (a.f_id=m.f_id)
    and (trunc(m.cr_time) < '02-Apr-2008')

    Are you looking for this?
    UPDATE table1 A
       SET A.my_id = 247
    WHERE EXISTS (SELECT 'x'
                     FROM table2 b,
                          table3 M
                    WHERE b.my_id = A.my_id
                     AND b.my_name LIKE 'OIS SrClerk%'
                     AND A.f_id = M.f_id
                     AND TRUNC (M.cr_time) < to_date('02-apr-2008 00:00:00','dd-mon-yyyy HH:MI:SS') )changed date string to to_date
    Message was edited by:
    devmiral

Maybe you are looking for