Gr based iv in miro

Dear Forum,
I have 2 scenario to seek advice.
1) gr based iv is ticked in PO.
if GR not made yet, during miro with reference to PO, line item not editable and grey out, correct?
2) gr based iv is ticked in PO.
if GR made already, during miro with reference to PO, line item where quantity and value field are editable with figures. correct?
3) gr based iv is ticked in PO.
if GR made already and invoice also posted, during miro with reference to the same PO, line item where quantity and value field not editable with figures. correct?
4) gr based iv no ticked in PO.
if GR not made yet, during miro with reference to PO, line item where quantity and value field editable and empty, correct?
5) gr based iv no ticked in PO.
if GR made already, during miro with reference to PO, line item where quantity and value field are editable with figures. correct?
6) gr based iv no ticked in PO.
if GR made already and invoice also posted, during miro with reference to the same PO, line item where quantity and value field not editable with figures. correct?
Thanks

Hi,
1) gr based iv is ticked in PO.
if GR not made yet, during miro with reference to PO, line item not editable and grey out, correct?
Yes.
2) gr based iv is ticked in PO.
if GR made already, during miro with reference to PO, line item where quantity and value field are editable with figures. correct?
yes, with the default qty and field for how much GR is done.
3) gr based iv no ticked in PO.
if GR not made yet, during miro with reference to PO, line item where quantity and value field editable and empty, correct?
Yes
4) gr based iv no ticked in PO.
if GR made already, during miro with reference to PO, line item where quantity and value field are editable with figures. correct?
Yes
Raj
Edited by: Raj on May 4, 2010 2:44 PM

Similar Messages

C Form based on Invoice / MIRO

Dear All,
We have an issue to create C from, i.e we want to create C Form in SD based on Invoice and for MM based on MIRO.
Kindly guide me. Thanks In Advance.
S Kumar V

Hi,
You can capture C form in t. code J1ILIC01, and able to assign in J1IUN, for sales order and for the purchase order, try this and revert post if you got any doubts.
bvdv

Gr based iv where miro done

Dear Forum,
I have another 2 scenario to seek advice.
1) gr based iv is ticked in PO.
if GR made already and invoice also posted, i make another miro posting with reference to the same PO, may i know line item where quantity and value field editable? with or without figures?
2) gr based iv no tick in PO.
if GR made already and invoice also posted, i make another miro posting with reference to the same PO, may i know line item where quantity and value field editable? with or without figures?
Thanks
Rgds

Hi,
1)gr based iv is ticked in PO.
if GR made already and invoice also posted, i make another miro posting with reference to the same PO, may i know line item where quantity and value field editable? with or without figures?
qty and value field will be editable but without figures.
2) gr based iv no tick in PO.
if GR made already and invoice also posted, i make another miro posting with reference to the same PO, may i know line item where quantity and value field editable? with or without figures?
qty and value field will be editable but without figures.
Raj

Manually adjusted G/L and Material values in MIRO document

Dear All,
Can you please help me get the logic of capturing data from RBCO and RBMA for manually adjusted entries. I have a Purchase Register, which is completely based on the MIRO documents. The values are picked up from RSEG and RBKP. Header-wise and item-wise details are also displayed in the register.
Since manual adjustments are done, the values are not saved in RSEG Table. The total value is reflected in the RBKP - Header table. How do I get the value bifurcation?
The values are there in BSET table also. But I fetch the values with respect to the tax codes and condition types from BSET. Accounting values are fetched from BSET in the existing register.
According to the current logic, the adjusted values are not populated to the Purchase Register.
How to display the values in item-wise and header-wise?
Please help me get a logic of getting the values from RBCO and RBMA or from BSET.
I prefer to get the values populated from BSET, because we will get the tax values also.
Thanks,
Haritha

Hello , there are two tabs next to "Po reference" tab called "G/L Account" & "Material" tabs which can be used for G/L Accounts & material entering.
if you don't have these tabs , please check for authorization.
below screenshot for reference.
thanks

My Client wants to restrict appearing used PO Line items in MIRO

Hi Gurus
My client wants to restrict appearing blank line items agaisnt already used Purchase Order Items (Full Qty GR / IR happened, GR Based IV) in MIRO so that user can not book another invoice against the same PO with diffrent ref. no. and in date.
Is there any way (User Exit / Screen Variant) we can make it?
Please reply.
Thanks
Sanjib

Hi
Even if I set Final Invoice Indicator in MIRO and booked invoice against the PO systems is showing blank line items (Amt & Qty are blank) in MIRO agaisnt the PO.
Can you please run the scenario and tell me is there any way that we can restrict system showing blank line items against already processed PO items in MIRO. I have tried booking invoice agaisnt individual del note but blank line items are there.
Thanks
Sanjib

Import Miro when location is different

Dear All
I have a situation as below
Some material has been received from the import vendor. The material is presently on the port. We have hired some space on the port itself which we could consider as our external warehouse wherein the material would be loaded. Now as n when this material is required we will pay them the custom charges & get that material released. How can we cater such situation in our sap wherein we can have the stock status of that external warehouse.
Regards
Surender Bhomia

Dear Ravi
Thanks for the solution but when I create a separate Storage Location Accounting entries will be generated but the actual effect that I have to provide in my Books is that of the material Tfd from warehose to individual BA besides that Excise implications & other cost is also required to be booked. Secondly when I create a Storage location It will not solve the basic problem which is I have to keep only that stock which is being received from warehouse & based on that MIRO will me done.
Regards
Surender Bhomia
9312147612

Billing in Third party order process

Hi,
In the last stage of TPO Process we need to do billing.kINDLY inform what is the reference document when we want to do billing for a third party order process in VF01, Is it sales order?

Hi,
In the Third Party processing,
You refer the Sales order for creating the Billing document to the end customer
In the Item category level of the Third party, one field which control the Billing relevance
If you check the BILLING RELEVANCE for TAS item category, it is F which says, the billing will be based on the MIRO ( vendor invoice)
In general for Third Party, Vendor will directly send material/Goods to the customer and that notification will be sent to the company.
If say, out of 10 PO items, Vendor has send only 5 quantity to the customer and we have to bill the customer for only 5 quantities so once the billing is generated it will refer to the invoice quantity of the MIRO
Hope it is clear,
regards,
santosh

SAP CIN - Propose values during bill of entry.

Dear Friends,
We have implemented the process for imported goods procurement and as standard process, we create bill of entry before GR. There are many line items in PO and each item having 7-8 duties, also the exchange rate might be different at the time of PO creation and at the time of bill of entry creation, Is there any way that the system can propose the amount and quantity from PO or any exit where we can recalculate the duty conditions according to new exchange rate and propose in MIRO?
Thank you,
Best Regards,
Soumya

Hi, If you search SDN you will get lot of thread regarding Imports Scenarion of India which is very complicated & tiresome for users, Now about your query if you want fix rates as per PO, then you can select the Fix indicator in PO next to exchange rate at header, which will of no use.
Normally at the time of MIRO we have to book the 7 custom duties in INR & not in foreign currency & that also based on the BOE which you will get from customs, Now based on this MIRO values your GRN values will be updated, for payment of foreign Vendor system will take the exchange rate maintained in OB08 as per the present rate maintained by Finance & accordingly it will hit your Exchange rate gain or loss accounts,
There is no exit for your requirement, but you can develop a program which may help you for your requirement which also you can search in the forum itself.
You can refer below link for some logic for development, check if it helps you,
[MIRO Z development|CustoMS MIRO duty value;

Senario maping for sending goods for replacement

Hi All,
We have a senario to be mapped in SAP MM. We are into aircraft maintenence business.
All our air craft are insured from tip to tail. If any of the part the aircraft shows any problem then it will be send to the OEM and shall be replaced by them free of cost.
Only we have to pay the customs duty and the freight amount. How to map the complete tracking of sending the material to vendor and getting the replaced material and booking the custom value for that material.
Regards,
Mohar

You can create purchase order(161 movement) with returns tick to return defective part.
Do goods receipt(MIGO,161 movement).
Create import & freight condition types(M/06) & link it in pricing procedure (M/08).
Configure for purchasing & vendor schema settings.
Add another line item in same p.o for material replaced in same p.o with negligible price to enable
maintaining customs & freight values in respective condition type.
When BOE arrives maintain customs rate in condition types of purchase order.
Do custom invoice by capturing customs rates.
Do goods receipt based on custom MIRO.

Cross Company code invoices.

Hi All,
I want to creat a Cross Company code PO based invoices in MIRO.
I have created 2 PO's with the same vendor and differenct company codes.
But in MIRO it is taking only one PO to invoice.
I am not aware of cross company code settings.
Can any one plz provides steps to create the Cross Company code PO Based invoice in MIRO.
Thanks,
Moderator message: not directly related to ABAP development, please look at the appropriate functional forum.
Edited by: Thomas Zloch on Nov 2, 2010 5:56 PM

Hi,
Please contact to your MM consultant. Thanks

SES reversal and related issue

Hello,
ECC 6.0. Here is my situation. Please help!
-We have a service PO for $1000. (Commitment $1000 was created)
-We did a service entry sheet for $1000. (Commitment for $1000 was reduced.)
-GR document got created automatically for $1000.
-Did invoice for $500.
Now i wanted to reverse everything---since i wanted to enter the SES for $500.
-Therefore, i reversed invoice.
-Then i went in and reversed service entry sheet for the entire amount ($1000)
-The GR document got reversed for just $500.WHY?
I need the entire $1000 to be eliminated from the GR document so that i can start from the beginning.
Please assist!!!
Trey

Hi Trey,
You are right, now im getting your results!
The reason is because of Gr Based IV. When you use GR based IV for services, and then you put partial amount in MIRO, the accounting entries get screwed up.
For example,
After Acceptance,
Debit Expense   1000
     Credit GR/IR       1000
Invoice Receipt,
Debit GR/IR        1000
      Credit Vendor     500
      Credit Expense   500
Now cancel Invoice Receipt,
Debit Vendor       500
        Credit GR/IR     500
If you count the math, the reversal didnt reverse everything properly, therefore its giving you the wrong account balance. In this case, theres still a balance:
Debit   GR/IR       500
         Credit Expense 500
This is why when you cancel acceptance, it is only reversing 500, because system assumes that you have done invoice for the other half.. well thats what i think.
To fix the issue, please go to vendor master (XK02) --> purchasing view, then tick on Service Based Inv. Ver.
By doing this, whenever you create Service PO, the Service Based Inv. will be automatically checked.
Difference when you check on Service Based Inv, during MIRO screen you can actually see the breakdown service lines. Without it, it will only appear as 1 line in MIRO eventhough you have 10 service lines.
Another thing, when you perform MIRO transaction with partial, please distribute the price and quantity proportionately.
E.g. if service is 10$ for 1 HR
and invoice is actually 5,
so in MIRO make it 5$ and 0.5 HR. (This is if you are expecting the balance service to be performed later).
If no services are to be performed later, reverse GR and then make the new GR = Inv.
Hope this helps.

Doubt about intercompany process

hello sd gurus
1) I have a doubt in intercompany scenario...we treat customer is an internal customer...so what does it mean and the sister comapny deliver the goods to parent company or customer directly....plz clarify my doubt....
2) in third party process sceanario...how the company knows the vendor has supplied this much of quantity....i know one thing that is miro and billing relevance is (F)....and is there any other answer for this question...if any answer plz let me know......
3) what ever i post the question u guys are saying the answers...so how can i make reward points to u....whats the process to give reward points...
Thanking you

Hi Ram,
1) In my view actually in third party process migo should not happen ....directly the vendor send goods to customer ...so by miro we can understand how much quantity he has sended....there is no migo.so how can we understand through migo...
A) We do MIGO in third party sale,it is a proof for deliverd goods to the customer.even we do MIGO,based on the MIRO quantity ordering company bill to the customer.
2) Internal customer:
A) For intercompany sales we take 1 example-
Ordering company-1000
Delivering company-2000
External customer-10050
Internal customer-1000 (Ordering company)
here external customer will raise the order to ordering company.the goods are delivered from the delivering company,but this delivering company will not bill to the external customer.so this delivering company(2000) has to bill ordering company(1000).here payer for delivering company is ordering company.so that we have to create a payer master record by the name of ordering company and it has to assign in intercompany sales menu path.
so that while creating intercompany the system automatically determines the payer master not external customer.
I hope you understood.
Thank you,

PO with mutiple vendors

Hi,
I have a typical scenario wherein the business imports a certain product through a PO having numerous different pricing conditions. This PO has a base price condition payable to the main material vendor and about 8 other conditions currently setup as delivery costs (not accruals) e.g. port fare, surveyor fees, etc. with each having a different vendor assigned to it on the PO. The total net price of this PO eventually forms the inventory cost of the product.
In std SAP if a delivery cost condition is not setup as an accrual it adds up to the final net price of the PO even though I need to pay that amount to a different vendor.
Now while I do my GR based IV using MIRO SAP pulls in the net price payable to main material vendor including the delivery costs under "Goods/service items" which is not what I want. I want the delivery costs to be split from this net price and should be payable to the other delivery cost condition vendor assigned in the PO. I donu2019t want to set these planned delivery cost conditions as accruals because these are actuals and price is finalized at the time of PO creation.
Can someone let me know of an option in std SAP to accomplish my requirement? Do I have to change my condition type or calculation schema setup?
thanks,
MM
Edited by: Commercial Neptune on Aug 26, 2009 9:33 PM

But i want to do GR based IV, shouldn't SAP allow GR based IV for a non-accrual based delivery cost condition?

Po with account assignment category 'X'

Hi,
I have an issue like I created PO based invoice using MIRO
In the PO account assignment category should be 'X'.
When I create invoice using MIRO ,when I enter PO numver in the invoice, then the item is in disable mode.I am not able to edit price or quantity in the invoice.
I have not ticked the option GR based in the PO also.
still it is acting as GR based.
Can any ne tell me why it is happening like this.
thanks in advance.

hi,
populate the values using Call transaction or batch input method by recording the overall flow of your transaction. It would be consistent and flow remains in your control.
For recording
goto SHDB->new recording-> transaction...
Thanks
Sharath

Difference between PR and PO

Hi all,
Am new to sap and am abaper.
Can anybody clear me the doubts
1. Differnce between Purchase requistion and purchase order.
2. What is BOM.
3. difference between transaction ME23n and ME23.
4. Purpose of MIGO and MIRO..
Thanks in advance,
Ramya

Dear Ramya,
I will answer one by one
1.PR is the request created by user dept. for a consumable matl. it can also be created automatically
Where PO is the legal doc which binds company and supplier, based on PO only he will supply matl and get payment.Po can be created wrto pr
2.Bill of matl ( BOM ) is the structure will tell us the details of child items reqd to create a final product, it is mainly used by purchasing , and shop floor and controlled by Engg. dept Toced is CS01/CS02?CS03
3.ME23 is used old tcode to display a PO where as ME23N is enjoy tcode started from SAPR/3 4.6 C onwards
ME23n is combination of all screens u of me23 u need to go one by one screen like ME23
4.MIGo is the evidance for the goods supplied by the supplier, and it will create matl. doc no and account docc. o based on configuration
MiRo is the TCode used to check and post the invoice supplied by the supplier,
Base for MIRo is PO/migo doc no
After miro FI people will run for payment based on payment term with supplier.
I hope u will clear with this , if u satified pl provide points or reply in case of wuery
guru

Gr based iv in miro

Similar Messages

Maybe you are looking for