GR for Purchase order and GI for prod. order simultaneously

Hi Guys,
My client current has an external system, which does both GR for puchase order and GI for Prod. order at the same time. He is now migrating into SAP and he wants the same functionality. Do you have any idea how to do this.
For eg., Pick list(CO27) will pick and issue the components to production order, if the component is in inventory. if it is not there, it will give error.
Can we add, if material is not there, it should do GR and GI. is it possible with any customer exit in CO27?
Thanks
Srini

Hi,
In KANBAN, we have the possibility to do the GR (Goods Invard) if th container is Full and GI (to the production Order) if the Container is Empty.
It's just a thaught..
Regards,
Siva

Similar Messages

Report for Planned vs Purchase Order(Qty and rate)

Hi
I have the following issue. My client is raising Purchasing requisition and Purchase Orders in Me51N and ME21n respectively. The Project Structure is used only to plan the quantities and rates whereas no PR is released from it. But the components are attached. Now if i make use of the code CN52N, i am getting the planned quantity and unit rate for the planned value whereas no Purchase requisition number or purchase order number is updated in it.
My requirement is that both planned quantity, rate along with Purchase order quantity and rate should be available in a report.
1. Is there any setting that we can make so that the details are updated in cn52N (or)
2. is there any other report with those details (or)
3. Should that be achived only through ABAP.
Please suggest.
Raghav

There are a few reports that you can use to display STO requisitions and orders, by supplying plant, material, or MD04 like was mentioned.
The only thing that you don't have in a report is the link to the production order. In SAP in a MTS situation there's no fixed link (pegging) between the requirement (STO) and the supply (prod Ord).
You can view the pegging dynamically, for example in MD04.
Edited by: Mario Adler on Oct 27, 2011 12:13 PM

Report for Purchase orders and deliveries

Hi all,
Is there any report in SAP that gives me the list of purchase orders and the deliveries associated with those PO's.
Please advise.
Thanks in advance
Sruthi

Hi,
What kind of delivery are you looking for ??
If it's inbound delivery, use VL06I tcode & for outbound, try VL06O
Thanks & Best Regards,
Devendra Gaware
PS - Reward if found useful.

Open order quantity for "PurRqs" and Purchase Order"

Hi,
In one of my report I have to display the "Open Quantity" for 'PurRqs' I am using logic as follows:
Input the "Pur Req" and its "Item Number" in table EBAN in the fields EBAN- BANFN and EBAN- BNFPO and fetch the value of fields EBAN- MENGE and EBAN- BSMNG. Do the subtraction EBAN- MENGE minus EBAN- BSMNG and consider the value after subtraction as open quantity.
But in display 'Purchase' order in the tab "Quantities/Dates, there is field with "Open Quantity", my question is if this "Open Quantity" update in any table-fields? or is ther any 'Functional Module" to get this 'open quantity' directly? so that I can avoid the logic of subtraction.
Same question is for "Purchase Order", is ther any table-field or 'functional moduel' where I can get open PO quantity insteed of using tanle EKET and fields MENGE/WEMNG

Hi
What ever logic you are useing is right and go ahead with this and the same logic is for also Scheduling agreement.

Queries for Open Sales Order Lines and Open Purchase Order Lines

Experts,
Forgive me if these have been addressed elsewhere but I can't find them. I'd like to create two queries to use as Alerts as follows:
1. Query of open lines in Sales Orders that are more than two weeks old
2. Query of open lines in Purchase Orders that are more than 2 days old
Thanks in advance for your help.
Steve

Hi Steve,
A couple of query templates you can use for your alerts are as follows:
Purchase Orders
SELECT T0.\[DocNum\], T0.\[DocDate\], T0.\[DocDueDate\], T0.\[CardCode\], T0.\[CardName\], T1.\[ItemCode\], T1.\[Dscription\], T1.\[Quantity\], T1.\[OpenQty\], T1.\[Price\] FROM OPOR T0 INNER JOIN POR1 T1 ON T0.DocEntry = T1.DocEntry WHERE T0.\[DocDueDate\] < (getdate() -2) AND T1.\[LineStatus\] = 'O'
Sales Orders
SELECT T0.\[DocNum\], T0.\[DocDate\], T0.\[DocDueDate\], T0.\[CardCode\], T0.\[CardName\], T1.\[ItemCode\], T1.\[Dscription\], T1.\[Quantity\], T1.\[OpenQty\], T1.\[Price\] FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry WHERE T0.\[DocDueDate\] < (getdate() -14) AND T1.\[LineStatus\] = 'O'
You can change the SELECT section to remove some of the columns or add extra columns if need be. Once your happy with the query you can attach it to an alert and set the frequency.
Regards,
Adrian

Planned Order creation for Sales Order and Purchase Order

Hi
We have a following requirement.
In normal scenario when we have demand for material which was created by MD61 and in addition to that if there is Sales Order the 1st planned order gets revised.To better expalin this consider possible scenario
You create plan via MD61 for 200 qty .The system creates Planned Order for 200.
Now there is Sales Order for 150 peices.Then what happens is original Planed Order of 200 is changed to 50 and another planned order is created for 150 peices.The requirement is not summed.
Now in new scenario instead of Sales Order there is Intercompany Purchase Order of 150 peices.
Now the system is not changing original Planned Order of 200,but it created another planned order of 150.So now there are 2 Planned Orders of 150 and 200.
What I want to know is there any way wherein the system will reduce the original planned order (similar to Sales Order scenario)
Regards

Hi,
Use Strategy 52 in urs case.
PIR witll be created .
None convertable planned order will be created.
Once you get sales order for that material.
New planned order will be created which will consume PIR( planned order ).
Eg.
PIR 10.
Planned order 10 qty.
Sales oder 6
Planned order for SO 6 qty
Planned order through pir will become 4 qty.
Regards,
Vishal

Report for purchase requisition, purchase order and schedulling agreement.

Hi, thanks for your help.
I need a report or query just to view in one screen the related docs. as purchase requisition, purchase order and schedulling agreement.
I don´t know if there is a table or trx. with that information.
Is it possible to get that information via query ?
Thanks for your help.
Regards.

For PR and PO you can use ME5A
For PR and Scheduling agreements also you can use ME5A.

Cant able to see new value and old value for change in purchase order text

Hi all ,
I am not able to see changes done in material's purchase order text in material master. When i use tcode MM04 to see changes done material master it does not report new and old value for change if it is done in purchase order text of that material .
Thanks in advance ,
Shikha

Hi Shikha,
I'm not sure it works or not. But you can try SCU3 t.code and table DBTABLOG. May it can help you out.
I also faced this type of issue in Plant data and it get resolved.
Try and let me know...
Regards
Sunil Sisodia

Report to Purchase Orders with Good Receipt and pending for Invioce Receipt

Hello,
I'm looking a report bring me Purchase Orders with Goods Receipt and waiting for Invioce Verificacion (MIRO).
I appreciate any help.
Regards,
Hector

Hi,
ME2N - In selection screen, enter Selection parameters as
WE102 i.e. Goods receipt exists and in output screen put a filter on "Still to be invoiced (qty)" and "Still to be invoiced (val.)" as not equal to zero OR greater than Zero.
OR use RECHNUNG i.e. Open invoices and execute the report
OR Use MB5S - GR/IR Balances

Searching for a Project status = CLSD and open purchase orders?

Hi,
I am searching for a project status (Project Builder CJ20N) which allowed my to set a CLSD or a simillar status for settlement with open purchase orders.
This staus should allowed to process with open orders BUT not allowed to add new orders after setting this status.
Have somebody any idee? Or it is impossible?
Tahnk you in advanced for your Help.
Regards Baldy

Hi TV-kid,
while I was waiting for an answer I got to the same conclusion, so what you offers me is quite tempting actually.
I got a look to your website and it seems convincing. Still though, your case studies are in other business area, It's only a mater of good knowledge of File Maker.
I did download the test-drive last version of File Maker plus their samll Business Solution. I did read most of the documentation and the learning process would be too long to construct ourself a good crossed-data base.
I'd like to get in contact with you to look for a possible colaboration. to get private, I'd liketo do it through your contact link in your website .
To whom shall I write?
Thanks
Cheers
Cheers

How to find import and local purchase order for report

Dear Friends,
Please help me in coding this report, =below is the functional requirement.
1. To find the list of Import or Local Purchase Orders(purchase orders to be procured from another country).
2.Once the import purchase order is selected .The report sould display the PO number ,Currency , Value , po Date , Planned recipt date ,
BUy from vendor , ship from vendor , Origin Country, Destination country, and Status of the PO.
I am clear about the PO number Currency ,value and po date but could not get how do i fetch the details like:--Planned recipt date ,
BUy from vendor , ship from vendor , Origin Country, Destination country, and Status .
Your help is greatly appreciated.

Hi,
Buy from vendor is the real vendor who is supplying the items while Ship from vendor is the vendor who just arrange for the transport. This should be maintained in the pruchase order, just consult with your MM consultant to get where they are storing those details
Regards
Karthik D

Table for open Purchase order and pending invoices for vendors

Hi,
Are there any table to know open Purchase orders and pending invoices for vendors.
Quick response will be appreciated.
Thanks & Regards

hi,
Purchase Order:
S011:(PURCH: Purch. Group Statistics)
Statistics (SSOUR)
Version (VRSIO)
Month (SPMON)
Day (SPTAG)
Week (SPWOC)
Posting Period (SPBUP)
Purchasing Org (EKORG)
Purchasing Group (EKGRP)
Vendor No (LIFNR)
S012: (PURCHIS: Purchasing Statistics)
Statistics (SSOUR)
Version (VRSIO)
Month (SPMON)
Day (SPTAG)
Week (SPWOC)
Posting Period (SPBUP)
Purchasing Org (EKORG)
Purchasing Group (EKGRP)
Material No (MATNR)
Plant (WERKS)
Info Record Category (ESOKZ)
Material Group (MATKL)
Info Record (INFNR)
Country (LAND1)
EINE: (Purchasing Info Record: Purchasing
Organization Data)
Info Record (INFNR)
Purchasing Org (EKORG)
Info Record Type (ESOKZ)
Plant (WEKS)
EKET: (Delivery Schedules)
Purchasing Doc (EBELN)
Item (EBELP)
Delivery Schedule (ETENR)
EKPO: (Purchasing Document Item)
Purchasing Doc (EBELN)
Item (EBELP)
EKKN: (Account Assignment in Purchasing
Document)
Purchasing Doc (EBELN)
Item (EBELP)
Account Assignment (ZEKKN)
EKKO: (Purchasing Document Header)
Purchasing Doc (EBELN)
EORD: (Purchasing Source List)
Material No (MATNR)
Plant (WERKS)
Source List No (ZEORD)
thx,
Ganpat

Standard program for unbilled sales orders and purchase order items

Can anyone advice, is there any standard program which gives the unbilled sales order and purchase order items.

Hi,
Use the T.Code VA05/VA05n for list of all the sales order s which are open.
Take T.Code:VA05N
Select the option "Open Sales Orders".
Execute.
It will give you all the orders which are open.
The standard program for this is:"SD_SALES_ORDERS_VIEW".
The same you can also get by using the T.Code VF04.
In this if your scenario is "Order related",then select the option "Order related".
Else if it is "Delivery related",then select "Delivery-related".
Execute.
The standatd program for this is:"SDBILLDL".
T.Code:VF05/VF05n is for list of billing documents.
Regards,
Krishna.
Note:Pls search the forum.

When ordering enlarged photos from iPhoto, must I purchase them one at a time and pay a shipping fee for each and very one of them. Sort of a ripoff but I can't figure how to purchase many and pay one shipping fee.

When ordering enlarged photos from iPhoto, must I purchase them one at a time and pay a shipping fee for each and very one of them. Sort of a ripoff but I can't figure how to purchase many and pay one shipping fee.

You may have better luck posting in the iPhoto forum if no one on this forum is able to assist. I'm sure you are doing something wrong though.

Steps for free goods, purchase order and sales order

Hi all,
I am just starting to learn SAP and would appreciate it anyone can guide me along with navigation/steps for the below questions:
1) can we create free goods automatically when purchase order is generated?
2) Can we duplicate data from the purchase order to the inputs of sales order?
Thank you so much for your help!

Hi Experts,
I set Free Goods determination Inclusive Calculation Rule 1=Pro Rata and Cal Rule 2=Unit reference both are working fine.
When trying for cal Rule 3 it gives error message "The system determined free goods with quantity 0 for item 000010
Means for 10Ton of A product 10% means 2To are free. If I apply quantity in multiple of 10 i.e.10, 20 30 free goods are determined, delivery & billing is working well.
But if I apply 25Ton or 38ton, it is not even giving minimum discounts say for 25ton, it should give atleast 20ton equivalent fre goods. I checked in rounding rule OB90 where my company code3000 is giving 10 2 digit for USD currency. I set like this. When I checked pricing for condition type R100 it says requirement 055 not fulfilled. However I have maintained Req 055 & BaseType 28 in pricing procedure.
For cal rule 3 what else setting I should check.
Early reply with detail steps shall be highly appreciated.
Thanks

GR for Purchase order and GI for prod. order simultaneously

Similar Messages

Maybe you are looking for