Graceful failure - maximum server capacity reached

Hello,
We are doing Infrastructure design and planning.
We have a requirement for graceful failure in case the maximum capacity of the server is reahed.
For e.g. server is built for x number of concurrent users.
when x+1th user accesses the system, instead of system just behaving slow and not responding, we want it to redirect users to a web page or show a message saying please try after some time.
What is the best way to handle this requirement?
Can we use one of the web profile error pages for this purpose?
When the infrastructure doesn't support, is there an error generated? Or can we set it up to generate it?
Thanks,
Ekta

Hi,
From the Error message its clear your application is not able to allocate a new connection from the database .
You can increase the connection pool size by navugating to
Data Source==> AgileContentPool data source ===>connection pool and check the value of
1.initial capacity
2.Maximum capacity.
You can increase these capaciy and check .
Consult your DBA before increasing the capacity .
Hope it helps

Similar Messages

What happens when max job limit of few RAS server is reached?

Hi, I would like to know what happens when max job limit of server is reached. I know that we need to increase the job limit but my question is a bit different.
We have 7 RAS per servers. I got this message "The maximum report processing jobs limit configured by your system administrator has been reached" on 4 RAS servers but not all 7. I am tracking servers using PIDs on WIndows server 2003.
Does this means this is a warning that Job limit of 75 (in our case) has reached for 4 servers and for remaining 3 servers its still not reached. This means 3 servers are still able to handle more report request as they have not reached their max limit.
OR
This message means all of the servers have reached to their max limit and there is no more request which can be taken.
We are doing 3000 users performance testing on 21 RAS servers.
We are on BOXI R2 SP3 on IIS and opening crystal reports using .NET SDK.
Thanks,

This is same as my other question so I am closing this too. We have set limit as unlimited and during peak load we had almost balanced reports on all RAS.

Setting Maximum Server memory online

Hi,
We have found that the maximum server memory set in our SQL Server 2008 R2 production server is the default 21GB where as the physical memory in our server is only 12GB. Hence I am planning to reconfigure it 9GB. My question is that ,can I reset
the max server memory online in the production server with the following command-:
sp_configure 'show advanced options', 1;
GO
RECONFIGURE;
GO
sp_configure 'max server memory', 9216;
GO
RECONFIGURE;
GO
Could any body advice. Thanking in advance,
Binny

Hi Latheesh,
I had requested the ideal value to be set for "MINIMUM SERVER MEMORY" whose default is no 0. Should I change it?
Thanks,
Binny.
Sorry, I was talking about MAX SERVER MEMORY. Requested to change MIN SERVER MEMORY? Do you have something else running in the server apart from SQL Server? If its only SQL Server with a single instance, you can leave as default.
Read the below Excerpt from MSDN
Ref: http://technet.microsoft.com/en-us/library/ms178067.aspx
The min
server memory server configuration option can be used to ensure that SQL Server does not release memory below
the configured minimum server memory once that threshold is reached. This configuration option can be set to a specific value based on the size and activity of your SQL Server. If you choose to set this value, set it to some reasonable value
to ensure that the operating system does not request too much memory from SQL Server, which can affect SQL Server performance.

Has anyone had difficulty with maximum storage capacity after updating their iOS to the newest version?

Ever since I updated my iphone 5 and my ipad I've gotten the message that I've reached maximum storage capacity. Is it the update or what's going on? Also, when you are in itunes, what is the "other" under capacity? That's so vague!

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414

Error Running Forms: Failure of server APACHE bridge

Hi Everyone,
I have this problem on windows 7 64-bit... installation went fine without any errors.
Forms was working fine, i was able to run test form, and a form that i created, and both were running properly..
suddenly, while testing a new form module, it didn't work, and its showing :
Failure of server APACHE bridge:
No backend server available for connection: timed out after 10 seconds or idempotent set to OFF. I stopped and started the wls_forms and it didn't solve the problem..
i couldn't get to a solution anywhere, is it a problem with weblogic configuration? but how was it working well at the begining... if weblogic services are not starting, then what's the fix for that?
Help would be appreciated...
Thanks..

No, but as said you installed components (the HTTP Server) you wouldn't need for development. Did you start WLS_FORMS?
In any case the latest version of forms would be 11.1.2 where the installation process for a development machine is much easier.
You'd need
- wls1035_generic.jar and a 64bit java runtime
- the 64bit version of forms 11.1.2: http://download.oracle.com/otn/nt/middleware/11g/111200/ofm_frmrpts_win_11.1.2.0.0_64_disk1_1of1.zip
of course you can install the 32bit version of forms too on your 64bit machine.
then during installation just check "development mode", and you get a development installation like you got with iDS 10.1.2 with one weblogic instance instead of 3 and all the components you won't need (like webcache or the http server) won't be installed.
cheers

HP Officejet Pro 8500 A910 Scan to email failure Error Server Failure Try again Later message

HP Officejet Pro 8500 A910n ( CM758A ) Scan to email failure Error Server Failure Try again Later message
Ran HP Print & Scan Doctor - finds no problems. When sending a scanned document to the user email it has " Error Server Failure Try again Later " message . Can run test to the scanner without any errors. Tried to reset the printer - same result.
Any help would be much apreciated. AHuber

Hello there! Welcome to the forums @TheShadow42 ,
I read about the scan to email issue you are having and I will gladly try to help you! I would suggest checking your scan to email settings from the EWS, and perhaps run the scan to email wizard again. You should also see a scan and test option in the setup.
Here is a link to the User Manual, that has quite a bit of great info. Check out page 62 for the scan to email information.
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Failure of server APACHE bridge::No backend server available for connection

All,
I have an env: Browser -> OHS -> WLS(Apex Listener) -> Oracle DB.
If any SQL run for more than 5 mins, i get the below error.
Failure of server APACHE bridge:
No backend server available for connection: timed out after 10 seconds or idempotent set to OFF or method not idempotent.The only error i get is from the OHS's log
[2013-04-03T06:45:57.2946-05:00] [OHS] [ERROR:32] [] [core.c] [host_id: aa050] [host_addr: 121.146.60.102] [tid: 1260554560] [user: oracle] [ecid: 004qNDJn1du7m3KaETn3ES0004Ll00001T] [rid: 0] [VirtualHost: my.team.com:443] ap_proxy: trying POST /pls/apex/wwv_flow.show at backend host 127.0.0.1/7003; got exception 'Backend Server not responding'; state: reading status line or response headers from WLS (wrote? Y read? N); not failing over because method not idempotent, referer: https://my.team.com/pls/apex/f?p=4500:1003:16571271664493::NO:::Is there a timeout variable other than the below in WLS?
Session Timeout (in seconds): 3600 .
TIA,
JJ

Regardless of the version, this is not exactly a "Forms" failure. This is an issue between OHS and WLS. Basically it means that OHS (via mod_wl_ohs) was unable to communicate with WLS_FORMS (or whichever managed server you are trying to access). Most often this means the managed server is not running or not responding. If you believe it is running and is responsive (test by hitting it directly) then the problem is probably related to your installation. Generally, if you have not properly configured your networking before you installed WLS and FMw, then this can occur. For example, on Windows machine which do not have static IP addresses, the Installation Guide instructs you to install the Windows loopback adapter and configure it. If you did not do this, OHS likely will not be able to contact WLS_FORMS.
You can test what I have described above by attempting to access WLS_FORMS directly. For example:
http://yourHost:9001/forms/frmservlet
If that works, the issue is probably related to a net config issue.
If you have access to MyOracle Support, refer to these notes:
<blockquote><li>Failure Of Server APACHE Bridge After Running Report From Forms 11gR2 on Windows 64-bit platform (Doc ID 1457845.1)
<li>Oracle Fusion Middleware 11g - Troubleshooting the Error "Failure of server APACHE bridge" (Doc ID 1304095.1)</blockquote>
The product Documentation Library can be found here:
http://docs.oracle.com/cd/E24269_01/index.htm

Is there a maximum RAM capacity for a Macbook Pro 13 inch Mid 2009?

My questions is essentially, is there a maximum RAM capacity for a Macbook Pro 13 inch Mid 2009? I'm aware there are two RAM slots in my machine, but in past experiences with other laptops/desktop computers (not Apple) there was a default maximum which couldn't be overidden despite how much RAM was inserted.

You can upgrade up to 8GB using 2 x 4GB 204-pin PC3-8500 (1066 MHz) DDR3 modules. That's the maximum (unlike 2011 and later models which Apple tells you can only hold 8GB but can actually run 16GB).
If you do order RAM, order from a Mac memory specialist - Crucial, OWC, Corsair, etc.
Good luck,
Clinton

Set maximum server memory by using sql scripts

Dear all
How to set maximum server memory by using sql scripts in sql server 2014? Thx a lot
Best regards,
Wallace

You can use
sys.Sp_Configure to set max server memory
Here are some recommendation for Max Server memory based on RAM size
GB
MB
Recommended Setting
Command
16
16384
14745
EXEC sys.sp_configure 'max server memory (MB)', '14745'; RECONFIGURE;
32
32768
29491
EXEC sys.sp_configure 'max server memory (MB)', '29491'; RECONFIGURE;
64
65536
58982
EXEC sys.sp_configure 'max server memory (MB)', '58982'; RECONFIGURE;
128
131072
117964
EXEC sys.sp_configure 'max server memory (MB)', '117964'; RECONFIGURE;
256
262144
235929
EXEC sys.sp_configure 'max server memory (MB)', '235929'; RECONFIGURE;
512
524288
471859
EXEC sys.sp_configure 'max server memory (MB)', '471859'; RECONFIGURE;
1024
1048576
943718
EXEC sys.sp_configure 'max server memory (MB)', '943718'; RECONFIGURE;
2048
2097152
1887436
EXEC sys.sp_configure 'max server memory (MB)', '1887436'; RECONFIGURE;
4096
4194304
3774873
EXEC sys.sp_configure'max server memory (MB)', '3774873'; RECONFIGURE;
Hope this will help
Glad to help! Please remember to accept the answer if you found it helpful. It will be useful for future readers having same issue.

HTTP GET Failure 500 = Server Error

Can HTTP GET all kinds of files from a SunOne server, ascii and binary, large and small, but always get failure 500 = Server Error when attempting to HTTP GET an EXE file. Absolutely positively can download binary image files (C4) that are significantly larger than some EXE files, so size is not the issue. What might trigger this error? Thanks.

Hi,
Pls don't forget to reward points and close the question if you find the answers useful.
Eddy
PS.
Put yourself on the SDN world map (http://sdn.idizaai.be/sdn_world/sdn_world.html) and earn 25 points.
Spread the wor(l)d!

Se51 - maximum element size reached

Hi
I've a screen and i need to upper size of window, but appears msg "maximum element size reached".
I try seek in forum but i didn't find an answer.
Can somebody tell me how i change the maximum size ?
Thanks

Check this thread :
Re: Selection-screen problem only when in SE80

9iR2 OLAP Reporting Server Capacity Question

9iR2 OLAP Reporting Server Capacity Question
We are running Oracle 9iR2 with OLAP.
OS - RHEL3 AS
SERVERS - Dell Poweredge 6600's
cpu 4 x 2.4ghz
24GB RAM
1.5 TB space
Our AWs are typically 30GB in size. My question is, what is my capacity of jdbc thin client user sessions per box? I haven't been able to find much documentation on scalability with large AWs and a large user base. We will need to host reports for 6000 users moving to 16000 by next year.
We will be switching to 2x 1.6ghz 64bit opteron boxes this year sometime as well.

9iR2 OLAP Reporting Server Capacity Question
We are running Oracle 9iR2 with OLAP.
OS - RHEL3 AS
SERVERS - Dell Poweredge 6600's
cpu 4 x 2.4ghz
24GB RAM
1.5 TB space
Our AWs are typically 30GB in size. My question is, what is my capacity of jdbc thin client user sessions per box? I haven't been able to find much documentation on scalability with large AWs and a large user base. We will need to host reports for 6000 users moving to 16000 by next year.
We will be switching to 2x 1.6ghz 64bit opteron boxes this year sometime as well.

Precalculation SAP Server Capacity before deploy Roll Out Project

Hello Experts,
Kindly any one share your great experience to help our requirement.
We are planning to implement new business scenarios and new client in existing Production server.
Before deploy new business functionalists, what are factors need to consider in existing Production server.
How to precalculate SAP server capacity to adopt new functionality, how affect workload, performance, memory..etc..
Kindly any one the list of factors.. and some standard document.
Regards,
Karthik

Hi Karthik,
First find out the 'capacity' of your current server hardware. Ask the HW provider for the SAPS number of the machines, or look it up on SAP's benchmark sides http://service.sap.com/benchmarks
Then monitor the current usage of your servers to find out how many SAPS you need for the existing functions, and how much headroom you have left.
And for the new functions, look whether some sizing guideline exists (http://service.sap.com/sizing) or if a sizing for the new application is implemented in the quicksizer tool.
With that, it should be a simple a + b = c type calculation.
Best Regards, Randolf

FSCT (File Server Capacity Tool)

I have following questions.
1) Do we have Report on WINDOWS Server 2012 and Windows Server 2012 R2?
2) What kind of Hardware FC Storage Array are used as part of the testing (WIN2K8 R2)?
3) Apart from predefined scenarios, Is there a way I can write customer scenarios and hook this to the tool?
thanks, Your help is highly appreciated.
Sathya

Hi,
As this issue is related to File Server Capacity Tool, I recommend posting it in the following forum. You could get better answers from there.
http://social.technet.microsoft.com/Forums/en-US/home?forum=fsct
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

CUP 8.6.4 Calendar Presence integration - Authentication failure on server

Hi,
i have the following error from Presence Engine logs:
14:56:03.112 |system.pe.pa.owa.backend 1243662 ERROR -->EWSCalendarInfo::initiateRecovery: [email protected] POST 3 Authentication failure on server; Could not authenticate to server: ignoring empty Negotiate continuation, rejected Basic challenge
In Presence the Exchange SSL Connection/Certificate Verification is Ok. Where is the problem? Any suggestions?
Regards
Jason

I have now checked the Exchange logs:
From a working device which is unsing same impersonate account:
2012-09-05 00:00:04 192.168.100.10 POST /ews/exchange.asmx - 443 DOMAIN\Impersonateuser 192.168.50.34 ExchangeServicesClient/14.00.0650.007 200 0 0 234
And from Cisco Presence with the same impersonate account:
2012-09-05 15:01:12 192.168.100.10 POST /ews/exchange.asmx - 443 - 192.168.90.100 - 401 1 2148074242 39
It seems cisco cup could not use the impersonate user account, its missing. But i have tried different formats in CUPs gateway options:
DOMAIN\Impersonateuser
DOMAIN.LOCAL\Impersonate-user
Impersonate-user@domain
Impersonate-user
Any suggestions?
Jason

Graceful failure - maximum server capacity reached

Similar Messages

Maybe you are looking for