Grand Total Not working on Materialized view based table ??

Hi all,
I have a complex report report by using sum and decode function. I precalculated my requirment in database and then create a materialized view based on my sql statement. I import this view in physical and BM model and its results very fine and efficient. But the problem create when I implement Grand Total on my report in table view it did'nt work means (Grand Total is not working on this MV based table) Any idea why ??
any reply would by higly appriciated.
Regards

Hi Zishan,
Check the Aggregation Rule and set it to sum in the table view.
That is go to the "edit formula" tab of the column for which you want grand total and set that to sum.
Hope this will help.
Thanks
Ashok

Similar Messages

Subtotal / Grand total not working

I am new to OBIEE & I could not get a simple 'Total By' or 'Grand Total' in Answers, Table view. The default aggregation rule in Administrator is selected as 'Sum'. When I click on the 'E' summation icon, nothing happens. What am I missing?
Thanks,
Dinesh.

OK. I figured out what was wrong. I did not put the logical schema in a star schema approach (dimensions & facts). Once I did that, the sub-totals & grand totals started working.
But I am greatly disappointed by this limitation. I just have a copy of my transactional database & I do not want to do star schema data modelling so that I can quickly start reporting. Is there any work-around for this?
Thanks,
Dinesh.

Dependencies (references) tab not working for materialized views.

I am using SQL Developer version 1.2.0 Build 29.98. I also had this problem with version 1.1.
I have created some materialized_views that are used by assorted packages, some of which are in other schema than the one that owns the materialized_view. When I select the specific materialized_view, then click on the 'Dependencies' tab, two displays appear. the first, 'Dependencies' is populated. The second 'References' is not. When I click on 'Refresh', nothing happens. I wrote my own query to see if there was a problem with the underlying data. The query shows me that the linkage data is there, linked to the TABLE object created to support the materialized_view object.
SELECT
i.owner AS input_owner,
i.object_name AS input_name,
i.object_id AS input_id,
o.owner,
o.object_name,
o.object_id,
o.TIMESTAMP,
o.status
FROM dba_objects i
INNER JOIN
public_dependency p
ON (referenced_object_id = i.object_id)
INNER JOIN
dba_objects o
ON (p.object_id = o.object_id)
WHERE i.owner = :owner
AND i.object_name = :object_name

We finally got Office Web Apps installed and now the Most Popular is working. Of course that means only when the documents are viewed in the Office Web App are they recorded for the Most Popular report. We've done some testing and opening the
file directly in the desktop application, or even editing the file directly in the desktop application are never recorded. My one disclaimer with this is we are using Office 2010, I'm curious if Office 2013 perhaps records views and edits using the desktop
application?
Luckily the latest OWA patch now allows PDF's to open in the Word Office App as well, so those views are recorded. If you have any non office or non PDF in the library, views will not be recorded for these items unfortunately.
I can't believe how this isn't documented anywhere.
Nick Hurst

How to create materialized view based on a synonym

Hi all,
I am trying to create simple materialized view based on a synonym and that synonym is pointing a view in other database (using dblink). I am getting table or view not found error . I am able to select synonym if i use select but not in materialized view. Please help me.
Thanks,

The best way to do this is to create a materialzed view based on the underlying code of the original view. If you don't have this handy, issue the following in sqlplus:
select text
from user_views
where view_name = 'NAME_OF_VIEW'
You can then cut and paste the sql statement into your create materialized view statement.
Please note, you will probable have to set the long parameter to a higher value to reveal the complete statement for example:
SQL> set long 2048

Adobe Edge Animate CC 2014.1 is totally not working. It stop working after 5min. Sometimes is stops the operating system.

Adobe Edge Animate CC 2014.1 is totally not working. It stop working after 5min. Sometimes is stops the operating system. On on mac OS X Yosemite. macbook pro i7 2013.
I reinstalled it not helping.
Message was edited by: Daniel Boguszewski

UPDATE
i have ulpaded 2 animation ( one normal and one Responsive ) in 2 different server here the link
www.eclipseadv.com/maliRP/maliRP.html
Untitled
via SAFARI or CHROME on MAC all OK
but via IPAD ( SAFARI, CHROME and MERCURY) i didn't see the video, just the animation of the BUTTON and the link if i click on it (not in Mercury), like in the content viewer.

Infopath systemuser() method is not working in infopath view @extrant site .

We have a sharepoint webapplication with infopath views .We have controlled the switch view with authenticating login use id .It is working perfectly in intranet.
When we are publishing the site to internet using public ip @ that time initially infopath forms were not opening so i have used Alternate access mapping and published the infopath forms in ip instead of server name .
Now infopath forms are getting opened but system user() rule is not working and infopath edit forms are not working .Even list view web part with assigned to filtration is also not working .
I am stuck on the issue since Monday . Please suggest how to make it possible . it is very urgent.
We want our customer to access using ad authentication.

Jeeva,
Did you create this form in InfoPath itself or you are modifying a list into InfoPath?
The first screenshot shows you have selected Total "is not equal to" Jan+Feb….
You can simply add Total field with “TextBox” and double click on it and select default value button.
Once it will open up a pop up select “fx” button in value and insert all fields like, Jan, Feb…and then put a “+” sign in between
This will auto populate value once you enter it into any of the month filed.
Also it you have copied fields for several month in InfoPath it won’t work. You have to insert each field separately
Let us know your results
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful.

Cascading Dynamic Parameters Do Not Work In Crystal Viewer 2008?

I have generated a report with Crystal Reports 2008 that uses a dynamic cascading parameter. I work in waste management and the report I create in Crystal is used as a "template" with the tonnages collected from all of our customers. Our less technically minded employees can then open this report with Crystal Reports Viewer 2008, use the drop down menus to select only the customer they need a report for and then export this to PDF for delivery.
The report as designed works perfectly in Crystal Reports, but the parameter does not work in Crystal Viewer.
Some of our customers have more than one physical location that we service. The cascading dynamic parameter in my report allows you to select the customer name, and then it only shows the locations linked to that customer, so the end user can select only the relevant location(s) for the report. The cascading parameter is dynamic and allows multiple selections, and is linked to a Saved Data formula. The report is saved with the data.
When the report is opened in Viewer, one of two things happens. If the report is saved in Crystal Reports and a specific customer/location is selected, then ONLY those selected customer/locations are available in the Viewer. If ALL the customers/locations are selected in Crystal Reports and saved, then in the Viewer they are all available, but selecting one customer does NOT narrow down the locations (i.e. it does not "cascade") and instead ALL of the locations are available even if they do not apply to the customer.
If I use a single dynamic parameter and select ALL of the customers (for example), then when this is opened in Crystal Viewer all of the customers are available from the parameters drop down and the report works fine. As soon as this is tried with a cascading parameter however, Crystal Viewer falls down.
Does anyone know of a workaround to this or if there is something I am doing wrong?

I am using the free Crystal Report 2008 Viewer along with designing reports with Crytal Reports ver 12.3. With a test file from SAP called "Interactive Parameters", the parameter feature works to refresh the report. The parameters that are supplied in the sample report work with Viewer. They show up under the parameter list in the parameter side panel in Viewer and are available to make record selections. When I add a parameter to the sample report in Crystal 2008 and then view the report in Viewer, my parameters are unavalable for record selection while the original parameters remain available. Futher, my parameters are displayed under a section called "Current Data Set" in the Parameter side panel, while the selectable parameters are displayed under the "Parameter" section in the parameter side panel. There must be a setting that is treating the parameters I create differently form the parameters created in the original sample report. Any help would be appreciated.

Input textbox not working in Fullscreen view

Hi,
I've created one form application in flash, i have fillup the form(inputbox) in normal view, its working fine. but it's not work in fullscreen view,
Please let me know how do enter the text in input textbox in fullscreen mode.
Note: input textbox not work in fullscreen mode.
Thanks
Suresh

Hello,
I think your problem is very similiar to a problem that I had been suffering from a few days ago.
I think that the below code should solve your problem:
stage.scaleMode = StageScaleMode.NO_BORDER;
Chinmaya

Create Materialized View based on Results from LDAP Query

Hi -- I'm trying to create a materialized view based on results from an LDAP query. Unfortunately, it looks like a materialized view can't be created based on a stored procedure, which is where the LDAP results are obtained (using nested loops).
Does anyone have any idea how to do this without first kicking off a stored procedure that populates a temp table which would be used to create the materialized view? I'm trying to minimize the steps that the DBA's will need to go through when refreshing this new view.
Thanks,
~Christine

Can you give us more details about the stored procedure you're calling. It will help to know what parameters are involved and what data types they are.
Off the top of my head though it looks like, at the very least, you would need a stored function that calls the stored procedure. I don't think there is any way to call stored procedures from CREATE ... commands. If you're going to create a stored function anyway ... well, you might as well just create a procedure that inserts values into a regular table instead of fussing with functions and materialized views. You'll probably want to schedule your new procedure to run periodically since it sounds like you'll need the values refreshed from time to time.

I installed firefox 10 - it was offered on startup. I absolutely does not work with a cloud based program I use (corecon) and I want to GO BACK TO FIREFOX 9. how do i do this?

firefox 10 ABSOLUTELY does not work with a cloud based program, Corecon. I want to UNINSTALL firefox 10 and GO BACK TO FIREFOX 9 . How do I do this? This is a subscription service, you may not be able to try it. v9 works fine.

http://support.mozilla.com/en-US/kb/Installing+a+previous+version+of+Firefox
http://www.mozilla.com/en-US/firefox/

Adobe Staff Please Read - Tab Key Not Working in InDesign HTML5 based panel

Tab Key Not Working in InDesign HTML5 based panel
Instead of changing focus to next entry field when the tab key is pressed it hides the panel instead.
UI Nightmare.

I’m using editable text fields. When I hit tab nothing happens. Focus stays on current text field.
Mike Baugh • Creative
Director, Digital Production
+1 240-662-4442 office
+1 410-807-1633 mobile
[email protected]<mailto:[email protected]>
agency.discovery.com<http://agency.discovery.com/>

Site not working again in Chrome based browser

For the last few days I've noticed that this site is not working fully for Chrome based browsers. Reading the site is fie but clicking the Submit button to post an answer is not working! Any one else experiencing the same problem. Having to switch to IE
just to post this question!
The English Bob

I am using Chrome and have no problems.
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

How to create materialized view based on a view?

Hi,
I hope this is not very far fetched idea.
I have a very complex view and I would like to replicate it 'in place' that is I would like to make a materialized view that is based on this view complex view. I would like to use this materialized view (i.e table) to query data instead of using the original view, since it takes Oracle some 10-15 seconds to execute my query on the original view and I am not allowed to create indexes on most of the tables that are included in the original view.
Can this be done?
Best regards,
Tamas Szecsy

The best way to do this is to create a materialzed view based on the underlying code of the original view. If you don't have this handy, issue the following in sqlplus:
select text
from user_views
where view_name = 'NAME_OF_VIEW'
You can then cut and paste the sql statement into your create materialized view statement.
Please note, you will probable have to set the long parameter to a higher value to reveal the complete statement for example:
SQL> set long 2048

MDX not working in Power View on sharepoint 2013

I have this MDX statement below that should be able to dynamically give me a % of total for any dimension. IN power View (sharepoint 2013)
I am getting an error. It works in Excel and works in the AS browser but will not seem to work in power view. Any ideas on how to rewrite it so that it may work. I am surprised I cannot find anything on this online about this issue.
When you highlight the "#ERROR!" in Power view it gives a long description of
"The Axis Function was indirectly referenced from the context of a statement other than SELECT. Evaluations of Expressions involving this function succeed only
when indirectly triggered by a SELECT statement".
CREATEMEMBERCURRENTCUBE.MEASURES.[Percent
of Total] AS
//Used to get % from total
IIF([Measures].[Total Count] = 0,
NULL,
IIF(isempty( ([Measures].[Total Count],
Axis(1)(0)(Axis(1)(0).Count-
1).Dimension.CurrentMember.Parent
)), 1,
[Measures].[Total Count] / ([Measures].[Total Count],
Axis(1)(0)(
Axis(1)(0).Count-
1 ).Dimension.CurrentMember.Parent))),
FORMAT_STRING="#,##0.00
%;-#,##0.00 %";

Hey Mike, Thank you very much for the answer. Just need a little more help please???
I have added two separate MDX statements that should get the individual % for these two separate dimensions.
1. First does it look correct from what your saying individually. Would you write it different?
2. Next can you show me the MDX that would combine them into 1 measure. Once I can see how these two get combined into 1 measure I should be able to do this for the rest of the dimensions.
3. Will Power View ever allow Axis function? Just seems strange that it works in Excel Pivot but not in Power View.
WITH MEMBER [Measures].[Percent] AS
Case
// Test to avoid division by zero.
When IsEmpty ([Measures].[Total Count]) Then Null
// Test for current coordinate being on the (All) member.
When [Status].[Status Name].CurrentMember.Level Is [Status].[Status Name].[(All)] Then 1
Else ( [Status].[Status Name].CurrentMember, [Measures].[Total Count] )
/ ( [Status].[Status Name].CurrentMember.Parent, [Measures].[Total Count] )
End
, FORMAT_STRING ="#,##0.00 %;-#,##0.00 %"
SELECT
{ [Measures].[Total Count],[Measures].[Percent] } ON COLUMNS,
{ [Status].[Status Name].[Status Name]} ON ROWS
FROM [Report]
WITH MEMBER [Measures].[Percent2] AS
Case
// Test to avoid division by zero.
When IsEmpty ([Measures].[Total Count]) Then Null
// Test for current coordinate being on the (All) member.
When [Order Placed Date].[Order Placed Date].CurrentMember.Level Is [Order Placed Date].[Order Placed Date].[(All)] Then 1
Else ( [Order Placed Date].[Order Placed Date].CurrentMember, [Measures].[Total Count] )
/ ( [Order Placed Date].[Order Placed Date].CurrentMember.Parent, [Measures].[Total Count] )
End
, FORMAT_STRING ="#,##0.00 %;-#,##0.00 %"
SELECT
{ [Measures].[Total Count],[Measures].[Percent2] } ON COLUMNS,
{ [Order Placed Date].[Order Placed Date].[Order Placed Year]} ON ROWS
FROM [Report]

Grand Total not displaying correctly on Column level security.

Hi All,
I have implemented the Column level security for three columns. But in dashboard report. The grand total is not displaying correctly. The grand total values are still displayed for the hidden columns.
Is there any work around for this.
The sample how my report looks like after column level security is.
ColumnA Metric1 Metric2 Metrics3(to be hidden)
A 100 200
B 150 100
GrandTotal 250 300 400( this includes the value of A = 300, B = 100).
Regards,
Bhavik

Any pointers please.

Grand Total Not working on Materialized view based table ??

Similar Messages

Maybe you are looking for