Graphic Equalizer problem on my SB Audigy Advanced

I cannot reactivate my graphic equalizer. The enabling is no longer there.

ayasystems,
Did you contact Customer Support.... If you're referring to this forum, then I'll have to point you towards the red announcement at the top of each board, this forum is for user interaction, not for support.
What you're experiencing is normal, the sound you're getting through is only a stereo signal, so it'll play over the front speakers.
Cat

Similar Messages

Windows 7 can use Graphic Equalizer? (Audigy Value)

Hi, i'm new user?
now i use sound blaster audigy value but driver in cd driver not support windows 7 (Bluescreen)
and i want to use graphic equalizer, please help me?
Message Edited by materialise on 03-28-2009 05:03 [email protected]

Maybe you have installed all this stuff in wrong installations order. I have installed Win7 32 bit on friends Satellite A500 following this installations order:
-Win7
-chipset driver
-storage manager
-display driver
-sound driver
-modem driver
-supervisor utility
-infrared
-patches
-configfree
-VAP
-toshiba hardware setup
-HDMI control
-WLAN driver
Added Vista stuff:
-Toshiba assist - work properly
-Card reader - installed properly
-Webcam driver for A500 - tested with Skype - works properly.
-Synaptics driver
Everything works perfectly including hardware setup. I don't know maybe you should install Win7 again following this installations order.
By the way: hardware setup was shown in control panel in WXP but since Vista not anymore. So I asked you this question because I know for sure it is not in control panel anymore.
Since Vista Toshiba packed all tools and utilities overview in Toshiba Assist.

Graphic equalizer crashing after driver upgr

Hi.
Upgraded the drivers today using software autoupdate, for some reason the graphic equalizer stopped working.
Booted into safemode removed all drivers and reinstalled them from the cd and the equalizer was working.
Used software autoupdate and updated to the latest driver and the equalizer stopped working AGAIN.
Took a look in windows logbook and found this.
Felaktigt program cteq.exe, version .5..0, felaktig modul equda.eqc, version ..3.0, felaktig adress 0x0000ee9.
Not sure what the correct words are but translated into english its something like.
wrong program cteq.exe, version .5..0, wrong module equda.eqc,versin ..3.0, wrong adress 0.0000ee9
Windows xp with all recent upgrades.
Audigy2?
?So what is the problem and can it be solved?
Regards.

If you need the graphic equalizer you need to roll back to the latest working driver for the Audigy 2: http://danielkawakami.blogspot.com/
For installing the unofficial driver pack you don't need the official Audigy2 install cd, since the unofficial pack already includes the applications such as the graphic equalizer, EAX console, surround mixer etc.; if you need all the applications that are only available with the official Audigy 2 install disc you should install the drivers and applications from the disc and update the driver to the mentioned version of 2.09.006 (9 oct 2006); my experience is that this older driver for the Audigy series causes less problems than the official newer beta drivers.
Good luck!
Message Edited by CTman on -07-2008 :8 PM

No Graphic equalizer in Windows 7

Hello, you can either call me Rich or RDFmx3, which ever you like. This is my first post and I'm a old fart?so don't
be too hard on me,
First off I di check to see if my question had been asked before but like most places there is way too many pages to
try and look through so here it goes.
I have a older SB Audigy2 card and now that I'm using Win7 instead of XP I now no longer have a graphic equalizer to alter the sound for my games, "I'm used to haveing each game set up?a certaint way". I've tried a new driver but the equalizer doesn't seem to come with it.......or work, which ever. I'd buy a new card if I hadn't just bought a new Wheel so money is a little tight right now.
Well there it is, has anyone else had this problem and found a fix?
Later Ya'all

I can't remember if I got controls back using this driver (I havent used my Audigy 2 for years now) but it's worth a try. http://forums.creative.com/showthread.php?t=698949
You just need to google for a download link, it seems the NSA shut down all upload/download servers for whatever reason (not specific to this file).

AUDIGY ADVANCED

Hi, I have recently bought a dell inspiron 9400 and it had an option in the programe menu to upgrade my current adio to sound blaster audigy advanced mb. so i did it and paid for it. at the end there was a message saying " you sound blaster audigy advanced mb has been successfully activated. run the downloaded MBsetup.exe". I have been searching all day for this file in my hadr disk, but I could'nt find it. can anybody please please help me in this. I dont know from where to get this file now. I tried Creative but there is no option to download this file again. My audio is "sigmatel HD" though.

Hi Sanjee, I had the same problem. I have been in touch with the Creative helpdesk but they seem quite useless. This is the text of the reply I have had so far: Dear Chris,
Appreciate your reply to Creative Email Technical Support.
As regards to your enquiry, I do understand that you are having issue
with your Audigy Advanced Motherboard.
However, you may like to try downloading the base drivers for the sound
from the motherboard/mainboard manufacturer and ensure that the sound
output is working.
Next, you may like to download and install mbsetup.exe from the
motherboard/mainboard manufacturer. After which, you may like to try
entering the activation key.
Should you have any issue with the activation key, would you mind
providing me the below information, so that I could address them
accordingly:
The customer's full name :
- Telephone number :
- Email address :
- Model number of the Dell Dimension computer which contains the
motherboard :
- Dell Service Tag :
(located standardly on the front of the computer underneath the door
which covers the front-port microphone and headphone jacks)
- Original Activation Code :
- Symptom (has this been reinstalled four times? Are there system
crashes which have caused reinstallations repeatedly?) :
- Reason for requesting the Activation Key# :
- Any other comments that you feel is necessary :
Note that the activation key could only be entered 3 times and the
format of the activation key is CT0 (C, T and a digit zero) not CTO.
I hope that I was able to help you with this information to resolve the
issue and will look forward to your response. Thank you.
Do email back on the status concerning the issue, so that we can assist
you further.
If you still require assistance, please reply to this email with any
previous correspondence to ensure the quickest and most accurate
service.
Best Regards,
**name removed**
Technical Support
Creative Labs Americas
Gi'ven the experience of the person who installed mbsetup.exe and re-installed then got no sound I am inclined to leave things as they are and ask for a refund.Message Edited by Dale-CL on 03-02-2007 0:45 AM

Audigy Advanced MB not installing on W7

' I updated to Windows 7 64-bit from 32-bit Vista on my Dell XPS m530, which came with Creative Sound Blaster Audigy Advanced MB. My Sigmatel drivers are installed correctly, but when I try to install Audigy, I get the error "Audio drivers not found, please install audio drivers before running this setup program." Is the software not compatible with Windows 7 yet, is Creative and Dell holding back, or what's the deal?
Any help would be greatly appreciated.

I have the exact same problem.
I'm running an XPS 420, and just upgraded to 64bit Windows 7 today as a Christmas gift.
I have Audigy Advacned MB, and it also says that I don't have my sound drivers installed. Its been working with Vista 32bit'sall along. ?I just moused over my volume control and it says its installed and working fine.
Really want a fix for this from Creative, or someone else. I just want to be able to use my sound card.
::EDIT::
I tried reinstalling my 64bit sound drivers, and it still doesn't work.

Graphics rendering problem in web dynpro

Hi all,
I have a problem using BusinessGraphics in my web dynpro application. I got the "Graphics Rendering Problem". Reading some foruns, Ive read in some thread that I have to have 5 files under my igs/conf folder of SAP installation, but I have only 2 (gwfchart.tpl and xmlchart.tpl).
One proposed solution is to apply one patch to my igs server.
My question is....
- How do I dowload the patches ? From where ? I couldnt find a download link.
Thanks in advance,

Hi,
the corresponding note for the IgsUrl paramter mentioned by Rich is <a href="http://service.sap.com/sap/support/notes/704604">704604</a>.
I think you should check this first before you upgrade your IGS installation. Note <a href="http://service.sap.com/sap/support/notes/931900">931900</a> shows you how to find out the IGS patchlevel. Then you see if your IGS is running (correct) and maybe an upgrade is needed also.
Regards
Matthias

Using the itunes graphic equalizer with my ipod nano

I read in the ipod nano manual that it is possible to use the graphic eq in itunes for my ipod nano. You have to switch off the equalizer on the ipod in the 'playback' section which I did. Then the manual says that you can assign tracks to the graphic eq on itunes. Unfortunately it doesnt say exactly how to do that. I dont like the eq presets on the ipod nano and would like to use the graphic equalizer on itunes to eq all of the songs on my ipod nano. Does anyone know how to do this. Please help as this problem has taken over my life!!

*I dont like the eq presets on the ipod nano and would like to use the graphic equalizer on itunes to eq all of the songs on my ipod nano*
Are you planning to create custom EQ settings in iTunes and expect them to transfer to the iPod? "The iPod does not use custom equalizer settings made in iTunes. You can't create custom equalizer settings on iPod, or transfer custom settings to iPod": iPod: About the Equalizer

IGS Graphics Rendering Problem

Hi experts,
I have the following problem with the igs:
I have 2 applications with business graphics technicaly the same.
Both worked fine with the same igsURL, but lately one of them is showing "Graphics Rendering Problem"
Can You tell me please where else can be the problem? The SAP IGS is running, and the URL is the same for both of my apps, obvious the problem is in the app but Idon`t have an idea where to look
Thanks in advance
Z.

Hi,
This problem can also be caused when proper values for
Series and category are not bound..
Make sure you filled the dataNode with values..
Regards
LN

[Python pygame] Graphic equalizer - keeping sound and video in sync

Hi!
I'm writing a graphic equalizer in python and I want to use pygame for the video and audio output.
The video display of the moving bars works great, now that I have a correct way to read samples and decode them.
The problem now is: they're way out of sync with the audio playing in the background!
At the moment my code, that draws the bars basically looks like this:
# loop as long as we can get slice of the audio file for the fft
for n_frame in range(0, len(framebuffer), fftframesz):
clock.tick_busy_loop(t_loop)
# t_loop was defined as fftframesz over total_frame_count
# which means in words: t_loop is the amount of FFTs per second - or the cycles of THIS loop
# grab the frames and perform the fft here
...numpy.fft.fft...
# set the new bar heights and draw them
for bar in bars:
bar.update()
# if playback has not started yet, make it so
if not pygame.mixer.get_busy():
musicfile.play()
The way I'm thinking, this should be enough to keep sound and video in sync. Because we know the time that one cycle should take at most,
we can set the clock to tick_busy_loop this time. This way we make sure that the video is not faster than the sound.
But to me it seems that is is the other way round, i.e. that the video is slower than the sound. I already did some timing, but to no avail.
Is there perhaps a more easy, more elegant way to make sure that image and audio are in sync?
Any help is greatly appreciated!
Last edited by n0stradamus (2012-10-01 18:36:53)

Thanks for your ideas. I assume you mean I should go with a $1200.00 final cut pro software. NOT.
Sure the video will be on myspace and youtube but wether they are noticed or not is not as important as self satisfaction. I can easily split scenes into equal time zones as I said. Then drag them into clips and back all using the same camcorder. Multiple cameras and angles would be nice but this can be done on a low budget and still look good. I guess my original questions were not answered. Is there a way to determine the length of a transition and shorten the clip by that amount. Or the length of a still shot and do the same. Or perhaps they have been answered and the answer is NO WAY, and I am just not hearing it.
I suppose reimporting a video would be great if I could use two timelines like in audio and then blank out what I don't want in the first. But I just don't think this is possible, or is it. I've been reading iMovie HD6 The Manual that should have been in the box. It's a help but doesn't take you from the beginning of a project to the final project. Exporting to imovie or idvd is not an issue. BTW I got the clips in sync as I said by leaving blank spots and placing effects over them. I could insert the proper length video in those spots but that can look silly without transitions. But then again so can transitions. This stuff is very fun and interesting and a great learning experience. If I stop now as you suggest then I am not pushing myself to the limit. But thanks for your reply.

Driver for Audigy Advanced MB for windows 2

Hi,
Will really appreciate if some can provide me a link to download a driver for Audigy Advanced MB for windows 2000
I am novice in computers.
I had purchased a dell M330 system that came with pre-installed drivers loaded and windows vista.
With the system I got a CD.On the CD it is printed as Sound Blaster..... Audigy...Advanced MB.
I changed my OS to Windows 2000 server, now the problem is there is no sound. I tried to use the CD that came with the system, however, the message informs me that I need to install a sound driver. I don't know which sound card I have; but looking at CD I assumed to be Audigy Advanced MB integrated sound card.
I could not find the driver on the your creative website.
Can someone help me.
Thanks

Can someone pls help. Thanks

Creative SoundBlaster Audigy Advanced MB software activation probl

Hello!?I bought?a software named Creative SoundBlaster Audigy Advanced MB, when I ordered my notebook Inspiron 720 from DELL, on the 8th? of September, 2007. They provided a CD for the software, which I installed, and it worked. But then later that day (when I recieved the laptop), I formatted the hard-disk for the following reasons - ) It only had 2 partitions for the entire dri've, one of which was a recovery partition, and I wanted to create more.2) I wanted to remove MediaDirect.3) I wanted to remove bloatware that DELL gave me with it, ie, DELL Quickset, DELL Support, DELL this, DELL that, Norton AntiVirus etc.4) I wanted Vista installed by my way. After I had done everything I wanted, I started to re-install the Creative software, the same way like I did before. But this time, when it took me to the transaction page and asked me for the reason of re-installing this software, it said "The CD Key has expired."?I have tried 2 different browsers,?I have cleared my cache, I have penta-checked my CD-Key before each install and have done anything a Computer Software engineer (me) would do, with the help of the Internet as well. But my every effort went in vain. Then, I did something I didn't want to do, I contact DELL technical support. Their solutions ranged from installing the latest drivers (yes, drivers for a software), to removing and re-installing the latest Internet Explorer (yes, they asked me to REMOVE IE) to put the HARDWARE in some other machine. Quite clearly, the 4 support executi'ves I talked to there at DELL had no clue as to what is going on and what is the problem. Then, after a 2 hours chat with another one of them, I was told that they just provide the software, and it is Creative's duty to handle everything later and asked me to talk to you. The email support page do not have the option of support for this software, so I selected some other product but sent my problem.
It would be very nice to know if there exists a solution to this problem, and how should I approach it. It has only been 20 days since I bought this software. Thank you!

Finally, I got a reply from the email team, and they sought some further information, which I duly provided. Then, they provided me with a new CD Key. But here is the thing, they say after 3 times of re-installing the software, I will have to pay for it. What?Why would I pay for something which I bought, again and again? The whole world knows about Windows Vista, how incompatible it is with more than 80% of the software, and it will be the same till SP is released. I have since this Sunday gone have re-installed vista 4 times, once due to the fact that AHCI in the BIOS was not enabled by default, and I had to re-do the installation, then it was SATA drivers not presentonthe Vists disk, then the nVidia drivers had problem with Vista and it crippled it and won't go and then the Windows Media Player , quite clearly still not fully functionable, made my system bust. And I can say that it will happen again, so why do I have to pay some part of the software's price again? I am not using it on any other machine, and that is checked by it's CRC checker anyways, I am not using it for any business project, which shouldn't be a problem even if I did, as I own it. If any of you guys have an answer to this, please let me know.
Thank you, and have a very nice day all!

Graphic Equalizer in-ga

I have an Audigy 2 Value and I'm having trouble with my graphic equalizer. I turn it on and tune it the way I like, but when I start any of my games it resets to default, and sounds like crud. Does anyone know how to make it stay the way I set it's

Its A value card so good luck .

Graphic Equalizer probl

on my audigy 2 platinum, if i have the graphic equalizer turned on and i then run a game, the equalizer will turn off, and the sound will drop, and become muffled. How do i fix this?

I dont think the EQ would function during a game, would it's That give me something to mess around with later tonite
Go here C:\Program Files\Creative\MediaSource\Audio Device Selection and ensure your device is selected and not default.
Ill be back with my findings sometime later unless some one has the answer

Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

after a restart it works for a time, but always slow. I went to the Applestore this afternoon and the made a check and said it would be the logicboard and they would have to change it for CHF 600 and it would be ready in 10 - 15 days

Graphic Equalizer problem on my SB Audigy Advanced

Similar Messages

Maybe you are looking for