Graphic resizing function has changed, now crops the image, why?

I must have, without knowing it, changed some setting. Until now whenever I bring in graphic, like a png or jpg, I can resize it by using the selection tool (arrow) and at one corner of the image I click, hold down shift/command (Mac) and then reduce or enlarge the size proportionally. What has changed is that now the image does not respond like that but rather the same maneuver crops the image in the sense that, like using a mask function, the image does not change size but the border of it changes and part of the image left non-visible. I assume there is a setting I don't know that does this but so far have not been able to figure it out. Does anyone know?
Any answer appreciated as very frustrating.
Thanks,
— Richard

Yes, I see the difference. I tried the sequence you suggested and is working, but also had gone back and forth on the menu choices before doing this and it seemed to change things as well, so not sure what did it. Appreciate your help. Will follow up if problem not fixed.
— Richard

Similar Messages

ColdFusion 11: allowedextforinclude functionality has changed. But the docs haven't been

G'day:
I am reposting this from my blog ("ColdFusion 11: allowedextforinclude functionality has changed. But the docs haven't been") at the suggestion of Adobe support:
@dacCfml@ColdFusionCan you post your queries athttp://t.co/8UF4uCajTCfor all cfclient and mobile queries.— Anit Kumar Panda (@anitkumar85)April 29, 2014
This particular question is not regarding <cfclient>, hence posting it on the regular forum, not on the mobile-specific one as Anit suggested. I have edited this in places to remove language that will be deemed inappropriate by the censors here. Changes I have made are in [square brackets]. The forums software here has broken some of the styling, but so be it.
G'day:
Remember this one: "ColdFusion 11: preventing files from being included? [WTH], Adobe?". I can confirm this verymoderatelyslightly contentious feature has been changed in ColdFusion 11, but the docs have not been updated to reflect the change.
The issue is summarised thus (from the article linked-to above):
[...]out of the box ColdFusion 11 will only allow the inclusion of CFML and HTML files. Why? They cite "for security reasons". Here's a quote (posted in the bugtracker, originally from the pre-release forums):
"Vamseekrishna Manneboina: Yes, this was done as part of a security measure. You can now only include CFM/CFML files by default. You can specify additional extensions via a property called allowedextforinclude in neo-runtime.xml. By default, HTM and HTML file extensions are already added to this list/property, thereby allowing for inclusion of HTM and HTML files too by default."
OK, I disagree there's merit in this, some others agree, others disagree. But... so be it. I actually thought - if I was in a charitable mood - that the people that were "for" this change made a reasonable case for its inclusion, so - whilst not agreeing with them - I was content to just shrug and go "yeah, oh well".
Now this feature is still in the docs: "New in ColdFusion 11 - Restrictions", but this is not the way it now works. Initially I thought it had been removed completely (and I am now in the midst of retooling this article from saying that... as I only worked out what was going on 2/3rds of the way through writing it).
I did a secure install the other day, and one of the first things I tested was this:
 <cfset message = "before"> <cfoutput> #message# <cfinclude template="code.inc"> <cfset message = "after"> #message# </cfoutput>
 <cfset message="within"> <cfoutput> #message# </cfoutput>
And this all runs fine, as one would expect:
before
within
after
Next I checked neo-runtime.xml to see if the settings had been augmented to switch this off by default: but I'm buggered if I can see any reference to it anywhere.
So I then checked ColdFusion Administrator to see if there was any hint of it there, as this was one of the things Adobe said they were going to do in their solution to this. And there it is:
So by default now, anything is allowed. I figured I must have missed the setting in neo-runtime.xml, so changed the setting to "FOOBAR" so I could easily spot it, and there it is down @ /wddxPacket/data/array/*[16]/var[@name="compileextforinclude"] in neo-runtime.xml:
<var name="compileextforinclude"> <string>FOOBAR</string> </var>
And - having changed it back to something sensible: CFM, then the feature now "works":
before
#message#
after
However this is probably a worse security hole than the one they were trying to fix! It looks OK when looking at the render in the browser, but look at the actual raw mark-up:
before <cfset message="within"> <cfoutput> #message# </cfoutput> after 
We have unparsed CFML source code sent to the browser. This is awful. What if someone switches this on, and doesn't spot one of their old includes which has less-than-trivial CFML in it? It's now publicly accessible. Adobe have created a feature which has the possibility to leak source code to the outside world. How is that a security feature?
Also interesting is that with the super-secure profile installed, this is still off by default? I would have thought it'd be on in this case?
I still don't think this feature has been implemented properly, and it all still points even more to the fact the Adobe ColdFusion bods don't really know what they're doing.
Anyway, I'll nudge Adobe to at least get the docs sorted out.
Time for work (3min ago)...
Adam

Hi Adam,
Regarding "What if someone switches this on, and doesn't spot one of their old includes which has less-than-trivial CFML in it?", yeah I agree that'd be a problem. Hmm, maybe both this.allowedextforinclude *and* this.compileextforinclude should've been supported (instead of replacing the former w/ the latter as was done)? Example:
this.compileextforinclude="cfm,cfml,inc";
this.allowedextforinclude="cfm,cfml,inc,txt";
That way an exception could be thrown if cf|included file's extension wasn't in the this.allowedextforinclude list.
Perhaps the above could be shortened to:
this.compileextforinclude="cfm,cfml,inc";
this.allowedextforinclude="txt";//implicitly includes * from this.compileextforinclude (since -compile- implies -allowed-)
Dunno if that'd be confusing.
Anyhow, just some thoughts..
Thanks!,
-Aaron

In the new iOS-7 Safari, has the "reader" function been changed to eliminate the option to modify font size (and hence to modify the number of words per line), or is it just that I can't find how to do that?

In the new iOS-7 Safari, has the "reader" function been changed to eliminate the option to modify font size (and hence to modify the number of words per line), or is it just that I can't find how to do that?

iOS 7
Seperate text size modification is no longer available in Safari Reafer.
Use Settings.
Settings >General > Text Size

Something is wrong with the cropping. It won't let me crop the picture. Usually the arrow would appear so I can drag it to crop the image but now the little hand appear and does not change to the arrow.

I cannot use my crop function in editing. The little hand would not change to the arrow hence cannot drag to crop the image. It just happened today.

Lets start with details - what version of iPhoto and of the OS?
anything else that might help figure this out?
LN

HAs anybody noticed how the MAc Book Pro Login button function has changed with OSX 10.9?

Has anybody noticed how the Mac Book Pro login button function has changed with OSX 10.9?

No one in this forum will... this is the Mac Pro forum

Do I need to export multiple sizes for all standard print sizes? i.e.Say I crop the image in LR to 6'5" x 9' to fit within an 11" x 14" (overall) mat of a framed print.. Now let's say I want to reprint that same image in a 12" x 16" size ... to fit within

Do I need to export multiple sizes for all standard print sizes? i.e.Say I crop the image in LR to 6'5" x 9' to fit within an 11" x 14" (overall) mat of a framed print.. Now let's say I want to reprint that same image in a 12" x 16" size ... to fit within a mat of with overall size of 20" x 24"? Or will the 1st export be "locked" at 6.5" X 9" (proportionately)?

So, for the first one Export it cropped to 6.5 x 9 - and in the Export Dialog box there is a capability to rename the file for exported output - which would allow you to add something like the crop or intention to the base name of the file. e.g. for _IMG0846.nef - setup the output filename to _IMG0846-65x9 for 11x14.jpg and output it at, say 300 or 360 dpi. So, it has a unique name and purpose in your output folder.
For best results, now, re-crop the picture in LR - just open the crop [R] dialog again, reframe the image to the new ratio, 12x16 and Export again - with an adjustment to the filename. e.g. _IMG0846-12x16 for 20x24.jpg
So, now you have two clearly identified image files in your output area and you can provide those to whomever is printing for you, etc. Discard them when you're done since you always have the original to return to to re-frame again as necessary.
This way you get output sharpening and resolution (in pixels) optimized for your output print size. Maybe not super important for smallish prints-but more important for larger ones. Output at 100 quality.

Function to change status of the STS (Status and Tracking System)

Hi experts,
do you know a way to execute a function that changes status in the STS hierarchy?
We have a web interface with a BPS layout in it, and want to change the status of the STS according to the legal entity that has been changed as soon as a user clicks on a button.
Do you know a way (function or sth else) to do that?
Any hint will be greatly appreciated!
Thanks in advance,
Thomas

Have a look to these badis: CRM_ORDER_AUTH_CHECK (for authorization purposes), and CRM_ORDER_SAVE (To check the changes at save).

Can I crop the image in the canvas

Can I crop the image from the canvas area so I could make several windows to add some video clips or do I have to just reduce the size of the image and make the composite of the videos. i want to make vertical, rectangle and square composite of several video clips.

The Time Remap (simulating the corresponding function in FCP) can do basically 2 things:
a. apply keyframing to the speed of the clip: you can start a clip with speed = 0% (like a freeze frame) and gradually speed up the clip to its end at 100% (standard speed); or viceversa; or start at 100%, slow down to 0% in the middle and back up to 100% at the end. You can apply just any speed variation by keyframing the Speed control.
b. force the clip to play a frame in a time different than in the original clip; for example you want to have some action originally at time 2secs in sync with a drum roll occurring at frame 2,5secs: just keyframe that action frame at 2,5secs. Then the video clip before 2secs will slow down to meet the drum roll at 2,5secs and then speedup to go back in sync at the end of the clip.
A few notes:
- only video is affected, not audio (different from FCE Speed command)
- the clip length does not change
- to see the result in the canvas always render: what you see in the viewer is not the final result.
- instructions on its use are in the download page - if they are not clear let me know.
As a suggestion you can read Ken Stone's Time Remap up to Time Remap in timeline excluded. It describes this function as implemented in FCP4, but its principles (and some details) are the same as in my filter.
Let me know...
Piero

How can I create side bars without cropping the image?

I want to create side bars because I am projecting in an vertical panel, but if I crop the image them I only get the middle part of it.
How can I create side bars in an way that I can still move the image inside?

On a Video Track directly above the clip(s) you want to have behind the side bars, place a clip of Color (or whatever you want to use for your sidebars).
Now go to the Effects Tab > Matte >Mask Shape and drag the Mask Shape filter to the Color clip you have placed on the timeline.
Double click on the clip to open it in the viewer, and click on the Filters Tab.
Click Invert Box, and adjust the shape to get the side bars you want.
And now the clip(s) that are beneath this effect will have the side bars and be independent of it, so that you can move them around.
MtD

Do all the "themes" automatically crop the image?

I tried all six themes - and all six of them crop the image in one way or another.
is there any way to avoid this? is there a theme or something I can do to show the entire image on the slide show?
thanks!
WF

What aspect (size) ratio are your photos? Most of the themes, books, etc. are designed to a 4:3 aspect ratio as that's usually what most digital cameras create. You also have to set the display aspect ratio to 4:3 to avoid cutting off any of the photos (see bottom of screenshot below):
Click to view full size
The one theme that does not work is Sliding Panels as it uses frames that are not 4:3.

Photoshop Elements 9: fill edges after crop the image

Hello together,
I have generated a nice panorama with PSE9, after that PSE9 asks me to fill the edges. But the part which should be filled are quiete big, because of the deformation in the panorama. And I get always the message that I have not enough memory to fill the edges. So my idea was to crop the panorama and fill the edges after that, but i didn't find the option to fill the edges in the menu bar.
Can anybody tell me how to do that?
Greets
g0dj0e

Hi,
thanks for your answer, but this takes not the effect i want.
With the funktion "Edge Extension" the image will only be zoomed in/out.
Perhaps I haven't explained it exactly enough.
I have found a example with google:
http://pagrimes.com/wp-content/uploads/2010/04/Screen-shot-2010-04-30-at-9.25.55-PM.png
You can see, there is too much space wich would be filled. So I would crop the image to the area which I'm interessted. After I have croped it, I will fill automaticly the edges like I can do after I have generated a panorama.
I want to call the same funktion which is behind the question "Would you like to fill in the edges of your panorama?”.
I hope my request could be solved.
thanks and greets
g0dj0e

I am using Indesign cs5 version 7.0.4 with a mac OS X version 10.9.4. I am having an issue where the save and save as option disappears. I am exporting the file as .idml and then resaving to avoid losing work but has to import all the images which takes a

I am using Indesign cs5 version 7.0.4 with a mac OS X version 10.9.4. I am having an issue where the save and save as option disappears. I am exporting the file as .idml and then resaving to avoid losing work but has to import all the images which takes ages. Any help out there?

I believe there are a couple of similar threads about CC or CC2014 behaving this way that might give yo some hints, but CS5 is not supported on your OS and may not run properly regardless of what you do. An in-place OS upgrade or an attempt to migrate the application would both be major problems for ID, so if you did either of those things you'll want to uninstall, run the cleaner tool (CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3) and reinstall.

Version 30: I hit the bookmarks star & the search function has disappeared. Plus, the b/marks list covers part of the tab... can i get the search back?

FFox updated itself to version 30 -- most unfortunately as it happens. Until now, hitting the bookmarks star opened a window on the left with a search window on top & the list of bmarks following. The search window now has disappeared, and the bmarks list covers the actual page I am browsing...
Can I get the search function back? Maybe even put a stop to bmarks list maskign whatever I am browsing?
Alternatively, what other reputable browser can you recommend thereby ridding myself of this and any future destructive "improvements"?
Thank you

The sidebar icon is the icon between the history (clock) icon and the downloads (Down) arrow icon in this screenshot.

Color is cropping the image

I'm grading a short now, and I've stumbled across a problem I've never seen before.
Some of the footage is 720p while most of it is 1080p. No problem, I've done that before.
In one particular clip, I can see the whole image in the Geometry room, but the video viewer and output to monitor is being cut off or cropped. See linked images.
http://bildr.no/view/596822
http://bildr.no/view/596821
I have tried to go back to FCP and reset the basic motion, exported XML and reconformed in Color. Nothing changed.

Hey, sorry for not getting back to this thread. I found a solution for it.
But first things first. Actually, you're wrong. The red frame shows MORE than what you see in the viewer in the second image. You see her hand being cut off, there's no bag of peanuts in the frame? THAT was the problem. The video image did not show up right in the viewer nor output to monitor, and while panning around in the geometry room, I couldn't see more of the image like it's supposed to behave.
The clip had a 150% scale in the FCP timeline, but I didn't think that would affect anything - obviously it did.
The solution was to
- get into the timeline in FCP and bake the clip to a new file and replace with the new one.
I tried to export xml and reconform with the new clip with no go. So I brute forced it by..
- deleting the clip again
- export xml
- reconform in color
- back in FCP, add the baked clip again
- export xml and reconform
and that fixed the problem. Boy what a strange thing to do, but hey, it worked out in the end.

In Bridge CS6, my "Tools" tab is now missing the Image Processor option.

Hello!
Two glaring changes were made in my system all by itself. One is that in Bridge CS6, under the "Tools" tab, the "Image Processor" option is gone. All that's left is Batch Rename and Cache options. Does anyone know why this happened or how to restore this. Also, whenever I double click an image, it now goes directly to Photoshop as opposed to opening in Camera Raw first like it used to. All and any help is appeciated. Thank you!!!
Eric

Curt, thank you for your response. I did try that. I unchecked then
reselected all start up options and still nothing. Any other
suggestions?

Graphic resizing function has changed, now crops the image, why?

Similar Messages

Maybe you are looking for