Graphs based on detail records

Post Author: roncon
CA Forum: Charts and Graphs
I am using CR XI R2. I have a report that I need to create Horizontal Percent Bar Charts. My data comes from 27 statements that have 4 answers each. I need to create a chart for each statment showing the percentages of each answer in the chart.
I can create a report based on one statement with the correct chart in the Report Header section. The query is pulling that one question though. What I need is to have a chart for each question in the same report but I understand I can't insert a chart in the details section.
How do I go about doing this?
Any help would be greatly appreciated.
Ron

Post Author: archjw
CA Forum: Charts and Graphs
I'm having the same problem.I thought that by moving the graphs into a sub report, then placing that sub report into the Details section, it would repeat. This has worked for me before with Cross-Tabs, but it didn't with the graphs.

Similar Messages

Best way to create detail records based on data in the master record..

Hi,
I am using 11gr1p1 and ADF stack.
I have a master detail relation between 2 records. I have EO and entity associations. I want to create a number detail records based on the data on the master record.
For example
I have a Stay Record which has begin and end date I need to create the DailyStay Record for each day for the range of begin and end date of StayRecord.
Where should I do this? In EO implementation or in VO implementation.?
Thanks

Where should I do this? In EO implementation or in VO implementation.?If your child record should in no case be created without those default values, then EO.
Otherwise, to increase reusability of your EO, then in the VO over the view link (i.e. other VO's would still be able to use your EO without having the child VO created with these defaults).
This way your ViewObjects can also be used in a context where you don't want to copy from the masterFrank, If there's another UI flow that is so drastically different that it does not want things defaulted, then it probably needs a different VO altogether (on the same underlying EO though)

Restrict the detail record based on the record indicator

Hi, i have a master detail form
when i query the form at header block it shows all the headers say
header block
header, line num, desc
1, 1, pen
1 ,2, rubber
1 ,3, sketchpen
line block
line num, sub item ,cost
1 ,1.1, 50
1 ,1.2, 60
2 ,2.1, 70
2, 2.2, 5
it shows the output in this way
i want to restrict the line level block (say if my cursor is at record indicating row 1 in header) then in line level it should show
lines pertaining to line num 1 and header 1 --eg pen records
if my cursor is at line num 2 in header block, in line level block it should show only line num 2 details ie rubber details, how can i restrict this.
Thanks,

Define the relation between header and detail
join condition : header.line_num = detail.line_num
delete record behaviour : non-isolated
prevent masterless operations : Yes
after this if you navigate, the detail records will automatically gets queried accordingly.
Regards
Dora

How to print blank records after the detail records in a masterdetail report

Hi,
Developing a report for time and attendance record. In this report I am printing all the employees in a department, limiting the no. of records per page to 10.
I need to insert blank lines at the end of all of the detail records in a page that has less than 10 employee records so that the no. of records displayed on a page can always be 10(these blank lines will facilitate the management to note down the temporary employees who worked for the department but are not part of the department).
I am using a tabular form with group above layout.
The report layout is as follows:
Department : FINANCE & ADMINISTRATION
Employee Name | Employee Number |
1 Jim | 1234 | _________________
2 John | 5678 |__________________
3 blank
4 blank
5
6
7
8
9
10 balnk
Supervisor's Sign:______________________
Note: the no. of blank lines should be inserted dynamically based on the no. of emp. records being printed on the page.
Any help is greatly appreciated.
Thanks in advance.
Kavita.

Your solution works when I am not limiting the no. of records per page for a department to 10 records and when I want to print blanks lines for the depts that has fewer than 10 employees in it.
Exactly in my report I have several dept's that has more than 10 emp's. In such cases I'll be printing first 10 in one page and the rest in the next page. Now I want to dynamically print the blank lines in the second page depending on the no. of emp's on that page. I tried to acheive this by using a CS column that reset's at page level but, REPORTS is not letting me use CS column that reset's at page level in a format trigger. I also tried to copy the CS value into a parameter and or to a Place holder column and did not help.
Any more work around ideas to acheive this?? please help.
Thanks alot
Kavita.
Hi
Create a column called Serial_No in ur emloyee query like this
select 1 , empno ,ename from emp;
Create a summary column on the serial column with the function SUM
and resetting it to Page
Display the column in the report by using the text color as white
so it doesn't display in the report
I think this should help u i believe
Sri
Hi,
Developing a report for time and attendance record. In this report I am printing all the employees in a department, limiting the no. of records per page to 10.
I need to insert blank lines at the end of all of the detail records in a page that has less than 10 employee records so that the no. of records displayed on a page can always be 10(these blank lines will facilitate the management to note down the temporary employees who worked for the department but are not part of the department).
I am using a tabular form with group above layout.
The report layout is as follows:
Department : FINANCE & ADMINISTRATION
Employee Name | Employee Number |
1 Jim | 1234 | _________________
2 John | 5678 |__________________
3 blank
4 blank
5
6
7
8
9
10 balnk
Supervisor's Sign:______________________
Note: the no. of blank lines should be inserted dynamically based on the no. of emp. records being printed on the page.
Any help is greatly appreciated.
Thanks in advance.
Kavita.

How to put detail records in fixed formÉ

Hi,
I am trying to build a crystal report based on an existing printed form. The form includes elements that look like the following:
Activity
Hot Oiler - 4 mbtu     7mbtu
Pressure Pumping - 5K   10K   15K
Travel - 5K   10K   15K
Standby - 5K   10K   15K
Each Activity also has a quantity, a rate, and a total (quantity * rate) associated with it.
The user used to circle the applicable value on the paper form (for example, if it was a 4 mbtu hot oiler vs. a 7 mbtu hot oiler).
In the application and database the user will enter line items in the work order that specify if it is a Hot Oiler 4 mbtu or a Hot Oiler 7mbtu. Similarly, the user will create a record that is either Pressure Pumping 5k or Pressure Pumping 10K or Pressure Pumping 15K. And so on.
The application is capturing all of this information. I want the crystal report to still display each of these elements as they are laid out on the current paper form however because these are detailed records I do not know how to place them in the report properly. If we take the first line in the form, I created the formula:
+if {field_tickets_has_resources.resources_id} in [150, 151] then
"Hot Oiler - " & "4 mbtu" else
if {field_tickets_has_resources.resources_id} = 163 then
"Hot Oiler - " & "7 mbtu" else
"Hot Oiler - "+
I created another formula for the second line in the form:
+if {field_tickets_has_resources.resource_roles_id} = 15 then
"Pressure Pumping - 5K" else
if {field_tickets_has_resources.resource_roles_id} = 18 then
"Pressure Pumping - 10K" else
if {field_tickets_has_resources.resource_roles_id} in [22, 24] then
"Pressure Pumping - 15K" else
"Pressure Pumping -"+
And so on. However, I cannot place each of these formula beside each other in a details line because it places the values horizontally rather than vertically in the report. I cannot place these in a header because they are actually detailed records.
I hope this makes sense. Any help, as always, is appreciated!
Mark

Hi Mark,
I recommend a similar apporach but the first formula will be created so we can group the records by the Activity type. For example all the Hot Oilers then Pressure Pumping, etc.
We group on this formula then a second formula will build a list of the quantities.
One final formula in the Group Footer will display everything on a single line. We can then hide the Group Header and Detail section because we only want to see one line per actvity type.
Create a group on this formula:
@ActivityGroup
If {field_tickets_has_resources.resources_id} <> 0 Then
   "Hot Oiler"
Else If {field_tickets_has_resources.resource_roles_id} <> 0 Then
         "Pressure Pumping";
This formula will define and reinitialize a string variable for each group. This goes into the Group Header and can be suppressed.
@Initialize
WhilePrintingRecords;
StringVar myQuantity := "";
This formula goes into the Detail section. Based on your first formula I'm guessing the Activity Type is based on which field is populated. I assume only one field per record can have a value that isn't 0.
@Quantity
WhilePrintingRecords;
StringVar myQuantity;
If {field_tickets_has_resources.resources_id} <> 0 Then
   (Select {field_tickets_has_resources.resources_id}
      Case 150 :myQuantity := myQuantity & "4 mbtu "
      Case 151 :myQuantity := myQuantity & "4 mbtu "
      Case 163 :myQuantity := myQuantity & "7 mbtu ";)
Else If {field_tickets_has_resources.resource_roles_id} <> 0 Then
   (Select {field_tickets_has_resources.resource_roles_id}
      Case 15   :myQuantity := myQuantity & "5K "
      Case 18   :myQuantity := myQuantity & "10 "
      Case 22   :myQuantity := myQuantity & "15K "
      Case 24   :myQuantity := myQuantity & "15K ";)
This formula goes into the Group Footer and builds your string.
@Display
WhilePrintingRecords;
StringVar myQuantity;
{@ActivityGroup} & "-" & myQuantity;
All the sections except for the Group Footer can be formatted to hide.
Hope this helps,
Brian

Auto-populate fields in Custom Object Based on Another Record

Hello,
I am hoping to auto-populate a few default values in a new Custom Object record based on an associated Lead record. The layout is this:
I use the Lead record to take care of most of the information in the sales stages until the product is sold. The Lead record has fields to record information for a one product sale. The sales person can then use the Custom Object (called 'GX Additional Product') (which shows up in the Related Information section of the Lead record) to add additional items to a sales order request. Many of the fields in the GX Additional Product (custom object) record are identical to fields already filled out in the Lead record.
What I would like to do, is when a new GX Additional Product (custom object) is added to the Lead record, those identical fields already filled out in the Lead record, by default, populate the corresponding fields in the new GX Additional Product (custom object) record.
Is this possible? Is this something that can be done with JoinFieldValues? If so, I've had a bit of confusion trying to set up a JoinFieldValues expression.
If you have any information to share that would be helpful, that would be greatly appreciated! THANKS!

Hi,
You can use JoinFieldValue to Custom Objects from other entities, cause you will have other objects' ID recorded inside the CO's, when you open a new detail record associated with the parent. Make sure your custom object is showing as a detail section (N:1) into lead´s main page. Try with one field first, using the exact syntax provided at samples listed at product documentation.
regards,
Flavio Amorim
Brazil
www.triscal.com.br

Creating Graph based on runtime conditions

Hi,
Right now i am able to create Graphs based on Views. But my requirement is that, if i click on certain component, i should be able to crate another graph at runtime which will display information based on the Clicked Component of original graph.
Any help will be appreciated.
Thanks

Hi,
I think the options are
- create a second graph and hide it at runtime
- create the graph on the fly in a managed bean, wich is quite a bit of code to write, that is justified if the "generated" graph is different (e.g. different model data) for each master selection.
The first approach should be doable by detecting the selected information on the master graph and the query the detail iterator accordingly + displaying it.
The second approach is a deep dive into the graph model APIs because you will have to code this all manually. Note that we don't have documentation for this approach yet
Frank

Master-Detail Relation- Detail records not displaying

Hi All,
I am working forms(10g) customization for an oracle applications. our requirement is to develop a new window(screen) which should display all the related child records for the master record in the main form on a button press.
i have developed a new database block based on a vew and provided the relation with master block, and done the required customization.
But, when i run the form, and clicked on button, it is giving an error
FRM-40350 Query caused no records to be retrieved.below is the code that i have written on button click
BEGIN
          IF event = 'WHEN-BUTTON-PRESSED'
          THEN
          SHOW_VIEW('XXSCP_GBL_CUST_PEGGING_CON');
          SHOW_VIEW('XXSCP_GBL_CUST_PEGGING_STK');
          app_window.set_window_position('XXSCP_GBL_CUST_PEGGING_WIN',
                                         'CASCADE',
                                         'XXSCP_GBL_EXCEP_DETAILS_WIN');
      SET_BLOCK_PROPERTY('XXSCP_GBL_EXP_DETAIL_V',NEXT_NAVIGATION_BLOCK,'XXSCP_GBL_CUST_PEG_V');
      GO_BLOCK('XXSCP_GBL_CUST_PEG_V');
     -- fnd_message.DEBUG('before execute');
      EXECUTE_QUERY;
      :parameter.p_excep_detail := 'FALSE';
          ELSE
               NULL;
          END IF;
          EXCEPTION
               WHEN OTHERS
               THEN
               fnd_message.DEBUG('other error at button press'||SQLERRM);
          --     NULL;
END;I am able to query records in my view from database, but not working when i run the form.
ANy suggestion will be helpful.
Thanks in advance,
pavan

Duplicate post -- Re: Master-Detail Relation- Detail records not displaying

XML 1header and n detail records

Hi All,
AM new to XML Files generation.
I need a procedure which satisfies my business requirement
My business requirement is
we need to generate XML target files based on customer number.and item number. The out put file should contain Customer details in header and detail record should contain all the items ,quantity which belong to that customer.
For example if there are 4 customer's and each customer has 2 items under them then the XML files should be like
<Header>
customer number1
</Header>
<Detail>
Item 1
</Detail>
<Detail>
Item 2
</Detail>
In the above format i need to generate 4 XML files as i have 4 customers.
Could you please help me in writing a stored procedure for this requirement.
Thank you very much for your help in advance.
Regards,
Snigdha.
Edited by: user8595010 on Aug 3, 2012 1:40 AM

This will certainly not give what you expect :
xmlelement("Header", interface_type, partner_id, transfer_date, bix_customer_code, h_bix_article_num, uom, quantity_sold, batch_number),I'd use this instead (give the proper aliasing for XMLForest items, if necessary) :
FOR r IN (
select bix_customer_code
         xmlserialize(document
           xmlelement("RecordType",
             xmlelement("Header",
               xmlforest( interface_type
                        , partner_id
                        , transfer_date
                        , bix_customer_code
                        , h_bix_article_num
                        , uom
                        , quantity_sold
                        , batch_number )
             xmlagg(
               xmlelement("detail",
                 xmlforest( item_type
                          , l_bix_article_num
                          , batch_number
                          , usable_until
                          , total_quantity
                          , qc_status
                          , manufacturing_date
                          , expiry_date
                          , xml_version )
           as clob
         ) as xmldoc
from agg_apo_stock
group by interface_type
         , partner_id
         , transfer_date
         , bix_customer_code
         , h_bix_article_num
         , uom
         , quantity_sold
         , batch_number
LOOP
dbms_xslprocessor.clob2file(
    '<?xml version="1.0" encoding="UTF-8"?>' || r.xmldoc
, 'MYDIR'
, 'BIX_CUSTOMER_'||r.bix_customer_code||'.xml'
, nls_charset_id('AL32UTF8')
END LOOP;
Question 2 :
in the procedure the files are stored in 'MYDIR' , could you please let me know where can we see the XML Files?MYDIR is an Oracle directory object pointing to a physical location.
If you're the one who created it, you should know where it points.
If not, query DBA_DIRECTORIES dictionary view.

Master - Detail -- How to Hide page if no detail records

I'm hoping to be able to hide a page if no detail records exist for the master query.
My master query:
"Company" and "account" and balances for each account
(balances carry forward from previous months)
Detail Query:
transactions for each account for a month
-- Linked to the master by "account-id"
The master query is grouped into 2 parts:
a) Company
b) account and balance
Sometimes an account won't have any transactions during the month (especially if the report is run at the beginning of the month)
If I create a "summary" count field in the "account" group based on the transactions, then I can hide (not print) the "account" frame.
But I can't figure out how to do this for the "company" frame.
I'm probably missing something simple (or maybe not)
Any suggestions?
Thanks,
Eric

So basically you are showing each account on a separate page?
Move the objects shown in Company repeating frame to the account repeating frame. In this case company repeating frame will be blank. And your already created format trigger to hide account frame will work for both (company+account). So whenever any account is zero, it will hide all objects within the frame. Parent frame doesn’t contain any objects, it would not show the parent frame for that account. Make sure vertically elasticity of the frame is variable.
Hope this helps.

It is possible to generate the graphs based on policy that we set?

As i found that the Cisco Service Control Application Reporter only have the template graphs like top ten bandwidth user, can we generate the graph based on the policy that we defined on the subscriber policies?

The picture you see is simply a photograph of the original UltraSPARC T2 chip. You may be able to generate a layout of your own, but it will probably be different from ours.
Sun released only the Source RTL (Register Transfer Level) code, and synthesis scripts for the processor. To generate a complete layout, you would need to:
1. Synthesize all control blocks for the chip.
2. Manually lay out all custom RAMs, and datapaths.
3. Perform top-level floor-planning
4. Do detailed place and route on control blocks
5. Place & route the top-level chip.
It's a lot of work and involves lots of expensive CAD tools.
formalGuy

Master-details records

Hi Everybody,
i have a requirement to show master detail records.to show data i have 3 tables
they are 1) Flat_Master(flat_id,flat_desc,pic)
2)Flat_Detail(flat_id,flat_face_id,flat_loc)
3)face_tab(face_id,face_desc)
in my jsf page i displayed flat_master as master records and flat_detail as detail records
here flat_detail is updatable.so for flat_face_id i created a lov choice list based on face_tab table(ADF BC level).
so when master record i changed, my choice list is not getting changed amd even when page load also for the first record also it is not selecting..
How can i set this choice list value programatically based on master records?
Any ideas can you please share with me?
thanks
KM.
Edited by: Mr. Murali on Sep 13, 2011 3:21 AM

pls provide me the detailed view.,
what ur trying to say and wat s ur use case?

Eliminate top and bottom 20% of detail records

Post Author: optikconnex
CA Forum: General
I have two groups, Group1 is by PartNum and Group2 is by WorkCenter. I also have 1 detail section. I want to only show/select the middle 60% of records, or to reword that I want to eliminate the top 20% and bottom 20% of the detail records. How do I do this? I have tried using the Nth Largest and Nth Smallest and even Pth Percentile functions but I just don't seem to know how to use them correctly since I need this done at the detail level and not group level.
Thanks

Post Author: kcheeb
CA Forum: Crystal Reports
You could try hiding the records based on your formula but I suspect that'll throw your group totals off.
You might be best off using SQL to do that for you. Most of the major databases have Datamart type functions you can use.

What is the proper way to record line numbers in Master/Detail records?

Guys and Gals,
Been thinking about this for awhile, but thought it best to ask the people who really know what they are doing.
What is the proper way to record & show line numbers in a Master / Detail record set?
For example, take Master/Detail relationship Orders and OrderItems. Orders has a column Document_Number and OrderItems has Document_Number, Line_Number. Line_Number should contain the row number 1,2,3,4 ... etc. for each row in a document.
Should I ...
<ol><li>Add a sequence and a trigger in the database? The FusionOrderDemo does this, but then the sequence never "resets" and I've got row numbers that keep incrementing. So one document has rows 4,5,6 and the next document has 7,8,9 when they should both have 1,2,3.</li>
<li>Programmatically take care of the row numbers? This seems like I'm asking for trouble. Anytime an insert or delete operation gets done, I'll have to iterate through rows and re-assign row numbers.</li>
<li>Is there a way to assign row numbers in a table iterator (or data collection?) to an entity?</li></ol>
Any suggestions would be appreciated. It's looking like #2 is my only option, but if anyone knows different I'd love the input.
Will

Thank you both guys.
As John said, I believe I'm looking for a gap-free sequence per master record.
The line number of the OrderItems table is the second half of the primary key. The first half of the primary key (DocumentNumber) is the foreign key to the Orders table.
Think of it like line items on an order or invoice. For example, if you were talking to someone on the phone concerning an invoice, you might say, "The pricing for line item #3 is incorrect." In this case, it's good to have a common reference. Or imagine a Microsoft Excel spreadsheet with no row numbers displayed! You'd never get anywhere if you had to explain something over the phone.
If this is tricky to perform, I take it using a sequence and trigger such as the Fusion Order Demo is the best way to approach the challenge for simplicity's sake?
Will

Formula field, Detail records not getting updated

Hello seniors,
i need help on 2 issues;
first, Issue No. 1
i have master-detail form with the following tables;
POH                                  master record table
PH_NO                              pk
PH_PARTY
PH_FXRATE                       exchange rate
PH_PD_LOCAL_TOT           total of PD_LOCAL_AMT from details records
PH_PD_FOREIGN_TOT       total of PD_FOREIGN_AMT from details records
POD                      Detail records table
PD_PHNO              fk
PD_ITEM
PD_QTY
PD_PRICE
PD_LOCAL_AMT
PD_FOREIGN_AMT
M_PD_FOREIGN_AMT       Formula (PD_QTY * PD_PRICE)
M_PD_LOCAL_AMT           Formula (M_PD_FOREIGN_AMT/PH_FXRATE)
CTRL                 Control block
M_PH_PD_LOCAL_TOT           Summary-Sum-Table=POD, Field=M_PD_LOCAL_AMT
M_PH_PD_FOREIGN_TOT       Summary-Sum-Table=POD, Field=M_PD_FOREIGN_AMT
Triggers
POH Table
Pre-Insert   and   Pre-Update
:PH_PD_LOCAL_TOT := :M_PH_PD_LOCAL_TOT
:PH_PD_FOREIGN_TOT := :M_PH_PD_FOREIGN_TOT
POD Table
Pre-Insert   and   Pre-Update
:PD_LOCAL_AMT := :M_PD_FOREIGN_AMT
:PD_FOREIGN_AMT := :M_PD_LOCAL_AMTThe problem that i am facing is while i UPDATE a record.
whats happening is when the form is in Query mode and if i change a record, lets say
change the value of the field PH_FXRATE, then what happens is, on screen i get all Detail
record's M_PD_LOCAL_AMT Calculated & Updated, but the actual db field PD_LOCAL_AMT remains unchanged
in the database after i press F10 or Save button.
The update takes place for the POH table and form displays 1 Record updated.
whereas if i have for example 4 detail records, then form should update those as well and display finally
5 records updated is'nt it..?
In query mode,if i insert new or modify an existing record in the detail block, then at this point, form marks just
that particular record as CHANGED. Thus making changes at db level only for this particular record.
what i want is once i make changes to the field PH_FXRATE, then form should mark all detail records
as CHANGED and on saving, the PRE-UPDATE tigger of POD table should come in to force and the changes
in the values of M_PD_LOCAL_AMT in turn to the db field PD_LOCAL_AMT should get affected at db level.
i have also tried to put these assignments
:PD_LOCAL_AMT := :M_PD_FOREIGN_AMT
:PD_FOREIGN_AMT := :M_PD_LOCAL_AMT
at PRE-UPDATE of POH table, thinking that form might consider
all detail records, at this point. i noticed that it does it, but only picks
1 record (i guess just the first record always) and change a db level.
No. 2 Issue:
i have put a POST-FORM-COMMIT at form level for auditing the Total fields of POH table against the details records.
Declare
     M_LC_AMOUNT NUMBER(13,3);
              M_FC_AMOUNT NUMBER(13,3);
Begin
     SELECT SUM(PD_LOCAL_AMT) INTO M_LC_AMOUNT
     FROM POD
     WHERE PD_PHNO = :PD_PHNO;
     IF :PH_PD_LOCAL_TOT != M_LC_AMOUNT THEN
          :PH_PD_LOCAL_TOT := M_LC_AMOUNT;
     END IF;
     SELECT SUM(PD_LOCAL_AMT) INTO M_FC_AMOUNT
     FROM    POD
     WHERE PD_PHNO = :PD_PHNO;
     IF :PH_PD_FOREIGN_TOT != M_FC_AMOUNT THEN
          :PH_PD_FOREIGN_TOT := M_FC_AMOUNT;
     END IF;
End;i was testing and notice that in a query mode when all records are displayed.
if i go on changing values on records and save or save later keeping the form open,
form allows, but if 1 come back to a record which i may have changed and saved earlier, then it flashes Error;
"Records has been changed by another user, requery to ..."
i want to do an Audit before final db-Commit and keep the user free from this Error..
Please tell me first of all, is my approach for both of my issues,correct.?
if not, then please suggest what should be changed.
i'll highly appreciate for all your help. TYVM. Regards.

I did exactly as you suggested. It works well for new record insertion
but when i press F7 to query it, its flashes messages before displaying detail records
Field must be entered.
Mr. Andreas,
i have problem only when i change value of PH_FXRATE. It re-calculates on screen values for M_PD_LOCAL_AMT
(Formula M_PD_FOREIGN_AMT/PH_FXRATE)
i want the changed value of M_PD_LOCAL_AMT to be saved in the actual db-field PD_LOCAL_AMT.
for this i have PRE-UPDATE on POD Table
:PD_LOCAL_AMT := :M_PD_LOCAL_AMT
:PD_FOREIGN_AMT := :M_PD_FOREIGN_AMT
Which is doing that.It is not marking the detial record as CHANGED.
I tried giving the above assignments in the PRE-UPDATE on POH table.
It saves the changed value in the db-field, but not all detail records, if more than 1.
what you have suggested, will get me acheived what i am looking for..?

Graphs based on detail records

Similar Messages

Maybe you are looking for