Grid and Precision by decimal on V & H Transform
hi,
fantastic this new Lens Corrections on Camara Raw 6.1!
I would like to see grid for precion on architecture photography, and from 0 to 1 on vertical and horizontal most of the time need a decimal precision.
On Photoshop this decimal precion 0,1;0,2:... miss too.
Cromatic Aberration not so perfect as Nikon Capture NX2.
On Camera Profile why still "Camera D2X mode..." and not "Camera D3X mode..."?
Many Thanks to all on Adobe Team and Forum People.
Armenio Teixeira
There is a grid, available for use in the Lens Correction panel. Go to the flyout menu and choose "Show Grid." (Or press the V key.)
For your D2X/D3X question:
http://labs.adobe.com/wiki/index.php/DNG_Profiles:FAQ#WhyD2X
Similar Messages
-
Format and precision and rounding?
I have a vi I have attached and it is giving me fits. I am trying to create a number generator which will automatically figure out the number of turns I need to turn. I have plugged in default numbers for testing purposes. My results appear to be true, but it is not stopping the loop and confirming my result. Does labview not take into account the format and precision in its calculations. I have set the two points I am comparing to 2 decimal places, but it still does not stop the loop. It appears to be correct when probed, but then it just keeps on trucking. I guess I need to round to 1 decimal place. Any help with this is greatly appreciated.
Attachments:
CounterTest.vi 57 KBYes, the numbers are not equal at higher resolution, set the control/indicators to show e.g. 20 digits of precision.
You need to e.g. check if the absolute difference is less than a suitable threshold.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
CounterTestModified1.vi 59 KB -
ALV Grid and return to selection screen
Hello
I have an ALV Grid and when I push a buttom that I program appears another ALV Grid. In this second ALV I try to program different buttoms. When I program the BACK buttom I want to go to selection screen.
I try with CALL SELECTION SCREEN but when I stay in selection screen and push the execute buttom the ALV that I see is the second, not the first. It seems that we don't catch the news selections.
I put rs_selfied-refresh = 'X' after the CALL SELECTION SCREEN but is wrong again.
What can I do????Hello Silvia
There is a simple trick to return from the second ALV list directly back to the selection screen:
*& Report ZUS_SDN_REUSE_ALV_GRID_DISPLAY
REPORT zus_sdn_reuse_alv_grid_display.
TYPE-POOLS: slis.
DATA:
gt_t001 TYPE STANDARD TABLE OF t001,
gt_knb1 TYPE STANDARD TABLE OF knb1.
DATA:
gs_fcat TYPE slis_fieldcat_alv,
gt_fcat_t001 TYPE slis_t_fieldcat_alv,
gt_fcat_knb1 TYPE slis_t_fieldcat_alv.
PARAMETERS:
p_bukrs TYPE bukrs DEFAULT '1000'.
START-OF-SELECTION.
SELECT * FROM t001 INTO TABLE gt_t001.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
* I_PROGRAM_NAME =
* I_INTERNAL_TABNAME =
i_structure_name = 'T001'
* I_CLIENT_NEVER_DISPLAY = 'X'
* I_INCLNAME =
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE =
CHANGING
ct_fieldcat = gt_fcat_t001
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
i_callback_program = syst-cprog
i_callback_pf_status_set = 'ALV_SET_PF_STATUS'
i_callback_user_command = 'ALV_USER_COMMAND'
* I_CALLBACK_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME = ' '
* I_BACKGROUND_ID = ' '
* I_GRID_TITLE =
* I_GRID_SETTINGS =
* IS_LAYOUT =
it_fieldcat = gt_fcat_t001
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = gt_t001
* EXCEPTIONS
* PROGRAM_ERROR = 1
* OTHERS = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
END-OF-SELECTION.
*& Form set_pf_status
* text
* -->RT_EXTAB text
FORM alv_set_pf_status USING rt_extab TYPE slis_t_extab.
* NOTE: identical to STANDARD_FULLSCREEN with additional button
* for detail list ('DETAILLIST')
SET PF-STATUS 'STANDARD_FULLSCREEN'.
ENDFORM. "set_pf_status
*& Form alv_user_command
* text
* -->R_UCOMM text
* -->RS_SELFIELDtext
FORM alv_user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
CASE r_ucomm.
* Display detail list: all customers for selected company code
WHEN 'DETAILLIST'.
IF ( rs_selfield-fieldname = 'BUKRS' ).
SELECT * FROM knb1 INTO TABLE gt_knb1
WHERE bukrs = rs_selfield-value.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
i_callback_program = syst-cprog
i_callback_pf_status_set = 'ALV_SET_PF_STATUS'
i_callback_user_command = 'ALV_USER_COMMAND'
* I_CALLBACK_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
i_structure_name = 'KNB1'
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = gt_knb1
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
<b>* NOTE: when the program logic returns from the 2nd ALV list
* and exit = 'X' then the program leaves the
* 1st ALV list, too, and returns to the selection screen.</b>
rs_selfield-exit = 'X'.
ENDIF.
WHEN OTHERS.
ENDCASE.
ENDFORM. "alv_user_command
Regards
Uwe -
ALV GRID and Integrated ITS 7 (SAP GUI for HTML) - dissapears on reload
Hi All,
We have a custom report that uses an ALV grid to display information to the user. Within this grid, there are fields that are display only and fields that are editable. Also, the grid is wider than the screen's width. It works fine in ECC. It also worked fine when we were using ITS 6.4.
We have recently upgraded to ITS 7. Now when we run the report using a Transaction iView (in EP 7) or the Webgui service (SAP GUI for HTML), if a field that is editable has focus when an event is triggered that reloads the grid, the screen becomes blank. So, you can click the Save button and the screen goes blank, also, there are date fields in the grid and if you choose a new date, the grid reloads and the screen becomes blank.
We have found that when the screen is blank, you can use the "Page Up" button on your keyboard and the last few columns of the grid will appear. As if the entire grid has moved off-screen to the left.
If you click onto a non-editable field and refresh or save, the grid returns to its normal state.
We are on Basis Patch level 15.
Does anyone have any ideas on how to fix this?
Also, does anyone know of a standard SAP transaction we can call from the Webgui that would have a similar setup...with an ALV grid containing editable and non-editable fields? We would like to rule out any errors in the report itself. Since it worked before we upgraded and it works fine in ECC. This would be a really big help too.
Thank you so much!
-KevinHi,
Thanks Raymond, I have seen Note 314568. I could not get the second link to work but I have looked at just about every Note in reference to Integrated ITS 7 and Tables or ALV Grids and there are very many, so it would appear that SAP has had a hard time with implementing this control, but I have not seen any instance that matches the problem we are having.
Unfortunately, SAP will not investigate this unless we can provide a standard Transaction that exhibits the same behavior.
If anyone knows of a standard SAP Transaction that displays an ALV Grid that is wider than the screen (requiring a horizontal scroll bar) and with editable and non-editable fields, that would be fantastic. If we can test against that, then we would know for sure if this is a problem with ITS / SAP GUI for HTML, or if there is an issue with this specific report.
Thanks!
-Kevin -
How do I get my lightroom pictures (thumbnails, grid and loupe) back?
I have lightroom 4.2 and have been using it for about two months on a Windows 7 64 bit system. Last Friday ALL pictures - the thumbnails, and the pictures in the grid and the loupe views disappeared and were replaced by grey rectangles. See screen shot:
I have tried using backup catalogs and other possible fixes but nothing has worked. Today I uninstalled Lightroom, moved the remaining Lightroom files - catalog, backups, etc. - and reinstalled Lightroom. I then created a new catalog. But once again all I get are grey rectangles rather than previews. As can be seen, the catalog contains the information about the photos. I just can't see them. And that is pretty crucial in a photo editing program!
I'm stumped and need some help, please.
VerdunboyMany thanks to jim01403. I had managed to have the the pictures
reappear after doing many things including making some changes to the monitor's settings. Until I read the post from jim01403, I did not know how I had retieved those pictures. Now I believe that resetting the monitor profile is what corrected my problem. I've saved the location of the instructions for resetting the monior profile to an sRGB standard.
Again, many thanks.
Verdunboy1 -
Import number fields with scale and precision
When i import data to create a new table, how do i specify the scale and precision when importing ? ...or do i have to create the table manually and then import to an existing table?
The Data Workshop wizard allows you to specify the scale and precision for numeric columns.
-
How to make my own grid and perform a "snap to grid" effect?
Hi! I am a newbie in flash and I am trying to create a puzzle like game (a chinese puzzle game called tangram). I am wondering what kind of functions should I use to create a "triangular" grid i.e. something similar to this ? http://img40.imageshack.us/img40/2259/triangulargrid.jpg. What should I do to make the movie clips to perform the "snap to grid" effect to this grid?I have tried to draw my own grid and used the "cacheAsBitmap" function to implent it, however it doesnt seems to be working. Is there any suggestions or tutorials to this problem? Thank you very much.
Well, the project you are taking is not a simple one. It requires quite an experience with AS3. It is not a few lines of code but an understanding of Flash display list model and how objects can interact. In addition, there is no a single solution but rather wide array of possible approaches depending on use case.
To illustrate, the code below draws a mesh that replicates the image in your first post. Do you think that this is enough from the standpoint of your AS3 knowledge to get you started?
This code needs Flash 10:
var side:Number = 400;
var s:Sprite = new Sprite();
var g:Graphics = s.graphics;
g.lineStyle(3);
//g.beginFill(0xFF8000);
g.drawTriangles(
Vector.<Number>([ 0, 0, side * .5, 0, side, 0,
side * .25, side * .25, side * .75, side * .25,
0, side * .5, side * .5, side * .5, side, side * .5,
side * .25, side * .75, side * .75, side * .75,
0, side, side * .5, side, side, side
Vector.<int>([
0, 1, 3,
1, 2, 4,
0, 3, 5,
1, 3, 6,
5, 3, 6,
1, 2, 4,
1, 4, 6,
2, 4, 7,
6, 4, 7,
5, 6, 8,
5, 8, 10,
6, 8, 11,
10, 8, 11,
6, 7, 9,
6, 9, 11,
7, 9, 12,
9, 11, 12
addChild(s); -
Help me in alv grid and form printing
hi experts,
my requirement is
i have a check box in the selection screen for batch processing.
if i tick the check box, the data which is in the t_output table should be displayed in alv grid and
in turn if i select one row in alv o/p and double click on it the entire data shold be displayed in the form.
if 2 rows are selected in alv and double clicked on it then data in the two rows is dispalyed in the form.
points are rewarded .
thanks in advance.Hi,
Check the following link:
http://sapdev.co.uk/reporting/alv/alvgrid_rowsel.htm
Regards,
bhaskar -
Grid and objects at angle from the artboard
Hi there...
My issue is that the grid, and any shapes (such as a simple rectangle) are at a slight angle to the artboard - see the picture to see what I mean...
The artboard has horizontal and vertical sides but the grid is off at an angle. And as you can see, the white rectangle that I created is in line with the grid, which is out of line with the artboard.
I'm sure there is a simple explanation but I can't find any reference to this in my web searches...
Any assistance would be greatly appreciated!
Thanks a lot...Hi there...
My issue is that the grid, and any shapes (such as a simple rectangle) are at a slight angle to the artboard - see the picture to see what I mean...
The artboard has horizontal and vertical sides but the grid is off at an angle. And as you can see, the white rectangle that I created is in line with the grid, which is out of line with the artboard.
I'm sure there is a simple explanation but I can't find any reference to this in my web searches...
Any assistance would be greatly appreciated!
Thanks a lot... -
ALV REPORT: read selected checkbox in alv grid and process the pushbutton
my requirement is to check some rows from alv grid and the press the pushbutton. Thereby following things should process:
select all checked rows into an itab and call the transaction code CJ01 for all
entries......
I am finding the problem that when I select the checkbox....the internal table doesnt recognize the boxes as checked ones......
thanks in advance...
Kartikey Singh,Data: ref1 type ref to cl_gui_alv_grid.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
E_GRID = ref1.
call method ref1->check_changed_data.
loop at t_output where Flag = 'X'.
if t_output-VKUEGRU is initial.
message e000 with text-110.
endif.
endloop. -
Chart, axis and customize grid and labels
Hi!
I created simple LineChart. Chart is dynamic. It changes when
I choose something from ComboBox.
I want to customize vertical axis (mx:verticalAxis) to show
grid and label for: 0,1,2,3,4...etc.
Now I have:
<mx:verticalAxis>
<mx:LinearAxis interval="1" minimum="0"/>
</mx:verticalAxis>
But It doesn't work. Sometimes I see grid/labels in: 0,3,6
and sometimes 0,2,4,6 !! My maximum is changing but I think it
doesn't matter. I want to show label/grid for each integer number.
How to set it?
Thanks for help! :)
newmanHi,
Yes you can do this....you need to increase Top value for xtitle in cordalayout.cxml at this location OracleBI\web\app\res\s_oracle10\chartsupport.
Totaly we had five types in this LEFT LEGEND WITH TITLES ,RIGHT LEGEND WITH TITLES ,TOP LEGEND WITH TITLES,BOTTOM LEGEND WITH TITLES,NO LEGEND WITH TITLES.
So based on the type of view you used in you chart,change x and y axis titles,title and legends top,left,width,height as per your need.
I think you used BOTTOM LEGEND WITH TITLES,as per you requirement you need to increase xtitle-top value in order to increase size between x-axis and label.
**Restart Presentation and BI Server*
Thanks,
Srikanth
http://bintelligencegroup.wordpress.com/ -
How to print space as thousand seperator and comma as decimal seperator
Hi All,
I have requirement where I need to print the amounts with space as thousand seperator and comma as decimal seperator.
I have a field wrshb which is of type mhnd-wrshb. currently I am printing this. In the adobe layout I have declared this coloumn as Decimal field.
Now in the output it is printing as comma as thousand seperator and dot as decimal seperator.
For example ,currently the value is printing as 32,811.41
but I want the amount as 32 811,41
I have declared the variable as char16, using write statement in the interface I moved the value from currency field to char field.
Then in debugging i checked the value comes as 32,811.41 and it goes to dump with teh reason-cannot interpret as a number.
Can anyone help me in fixing this?
Thanks and Regards,
Karthik Ganti.Hi Adam,
As per initial requirement, I have set the format such that the amount is printing in below format as required.
Locale---Italian.
Space as thousand seperator and comma as decimal seperator.
for example 1 234,45
As some of the Currencies will not have decimals, now users would like to print amount without decimals. For example in my case amount printing in KRW ( Korean currency ) is also similar to the above format which is wrong.
for example Now amount is printing as 55 000,00. But actually it should be 550 000. Similarly for JPY currency also, as it doesnot haves decimals ( checked in TCURX table ).
I have written some logic in the interface. below is the logic.
WRITE:
wa_mhnd1-wrshb to wa_item-wrshb CURRENCY WA_ITEM-WAERS.
*READ TABLE lt_tcurx INTO lwa_tcurx WITH KEY currkey = wa_item-waers BINARY SEARCH.
IF sy-subrc = 0.
IF lwa_tcurx-currdec = '0'.
REPLACE ',' WITH SPACE INTO WA_ITEM-WRSHB.
REPLACE ',' WITH SPACE INTO WA_ITEM-WRSHB.
else.
REPLACE ',' WITH SPACE INTO WA_ITEM-WRSHB.
REPLACE ALL OCCURRENCES OF '.' in wa_item-wrshb WITH ','.
endif.
ENDIF.
a. when the write statement gets executed amount will be in ,. ( 1,234.45 )format. Then my logic gets executed correctly. In this company code is CH10 ( EUR ) and KR10.
b. But sometimes after the write statement gets executed amount will be in ., format ( 1.234.45 ). In this case my logic works, but gives the wrong value. In this case company code is VN10 ( EUR )
In both the cases currency is EUR.
Will the decimal format change accordingly based on the company code code currency.Can you please tell me why write statement behaved differently.
Do I need to change any locale in the adobe form, or any other logic to be written in interface. ? I am trying it out from long time, but not able to fix it.
Can you please help me how to achieve this ?
Thanks and Regards,
Karthik Ganti. -
RAC database cannot be connected after Grid and RAC DB have been installed
Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 VMs (main VM rac1 and slave VM rac2) with Oracle Linux 5.6
according to the website http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
Grid and RAC database have been installed successfully for both VMs rac1 and rac2. I am using the slave VM rac2 to test Grid and RAC database.
I have run the commands as below:
[ora11g@rac2 bin]$ pwd
/u01/app/grid/bin
[ora11g@rac2 bin]$ ./crsctl status resource
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4000: Command Status failed, or completed with errors.
[ora11g@rac2 bin]$ ./srvctl config database -d racdb
PRCD-1027 : Failed to retrieve database racdb
PRCR-1070 : Failed to check if resource ora.racdb.db is registered
Cannot communicate with crsd
[ora11g@rac2 bin]$ ./sqlplus SYS/SYS
SQL*Plus: Release 11.2.0.1.0 Production on Sat Mar 10 14:07:07 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
Enter user-name: SYS
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
Enter user-name: SYSTEM
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
SP2-0157: unable to CONNECT to ORACLE after 3 attempts, exiting SQL*Plus
[ora11g@rac2 /]$ /u02/11g_db/ora11g/racdb/sqldeveloper/sqldeveloper.sh
In its GUI, the inputs are below:
Connection: C1
Username: SYS
PWD: SYS
Role: SYSDBA
Connection Type: Basic
Hostname: rac2.localdomain
Port: 1521
SID: racdb2
Test: failed. Network Adapter could not establish connection.
Browser url: https://rac2.localdomain:1158/em
Its output: cannot connect to the server at https://rac2.localdomain:1158/em
As we see the outputs for commands above, Grid is running at the beginning but now is not running. SQLPLUS and SQLdeveloper cannot connect with database. Browser url cannot connect to the console https://rac2.localdomain:1158/em.
My question is:
Do any folks understand how to solve the above 4 problems ?
Thanks.Folks,
Hello. Thanks a lot for replying. The last 50 lines of the file "ocssd.log" is as below:
[ora11g@rac1 cssd]$ pwd
/u01/app/grid/log/rac1/cssd
[ora11g@rac1 cssd]$ ls
cssdOUT.log ocssd.log ocssd.trc
[ora11g@rac1 cssd]$ cat ocssd.log
2012-03-08 21:13:54.415: [ CLSF][1150617920]Destroying CLSF context
2012-03-08 21:13:55.418: [ CLSF][1150617920]Allocated CLSF context
2012-03-08 21:13:55.418: [ SKGFD][1150617920]Handle 0x7105660 from lib :ASM:/opt/oracle/extapi/64/asm/orcl/1/libasm.so: for disk :ORCL:ASMDISK1:
2012-03-08 21:13:55.418: [ CLSF][1150617920]Opened hdl:0x710d800 for dev:ORCL:ASMDISK1:
2012-03-08 21:13:55.470: [ CLSF][1150617920]Closing handle:0x710d800
2012-03-08 21:13:55.470: [ SKGFD][1150617920]Lib :ASM:/opt/oracle/extapi/64/asm/orcl/1/libasm.so: closing handle 0x7105660 for disk :ORCL:ASMDISK1:
2012-03-08 21:13:55.470: [ CLSF][1150617920]Destroying CLSF context
2012-03-08 21:13:56.472: [ CSSD][1685425920]clssnmlfmtlease: uniqueness 1331259161, gipc addr nm_rac-scan#192.168.137.35#36456
2012-03-08 21:13:56.608: [ CSSD][1685425920]clssnmvStatusBlkInit: myinfo nodename rac1, uniqueness 0
2012-03-08 21:13:56.697: [ CSSD][1685425920]clssnmvStatusBlkInit: myinfo nodename rac1, uniqueness 0
2012-03-08 21:13:56.754: [ CSSD][1685425920]clssnmvStatusBlkInit: myinfo nodename rac1, uniqueness 0
2012-03-08 21:13:57.425: [ CSSD][1685425920]clssnmlgetslot:lease acquisition for node rac1/slot 1 completed in 19380 msecs
2012-03-08 21:13:57.559: [ CSSD][1685425920]clssnmvDHBValidateNCopy: node 1, , has a disk HB, but no network HB, DHB has rcfg 226426240, wrtcnt, 89443, LATS 4294905400, lastSeqNo 89443, uniqueness 0, timestamp 1331258081/38436564
2012-03-08 21:13:57.559: [ CSSD][1685425920]clssnmvDHBValidateNCopy: node 2, , has a disk HB, but no network HB, DHB has rcfg 226426240, wrtcnt, 80216, LATS 4294905400, lastSeqNo 80216, uniqueness 1331259094, timestamp 1331259236/4294905820
2012-03-08 21:13:57.860: [ CSSD][1685425920]clssnmvDHBValidateNCopy: node 1, rac1, has a disk HB, but no network HB, DHB has rcfg 226426240, wrtcnt, 89444, LATS 4294905700, lastSeqNo 89444, uniqueness 0, timestamp 1331258081/38436564
2012-03-08 21:13:57.860: [ CSSD][1685425920]clssnmvDHBValidateNCopy: node 2, rac2, has a disk HB, but no network HB, DHB has rcfg 226426240, wrtcnt, 80217, LATS 4294905700, lastSeqNo 80217, uniqueness 1331259094, timestamp 1331259237/4294906920
2012-03-08 21:13:58.049: [ CSSD][1685425920]clssnmvDHBValidate2012-03-10 12:07:08.298: [ CSSD][471957248]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331399227
2012-03-10 12:07:08.300: [ CSSD][471957248]clssscmain: Environment is production
2012-03-10 12:07:08.300: [ CSSD][471957248]clssscmain: Core file size limit extended
2012-03-10 12:07:08.518: [ CSSD][471957248]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
2012-03-10 12:07:08.518: [ CSSD][471957248]clssscSetPrivEnv: IPMI device not installed on this node
2012-03-10 12:07:08.519: [ CSSD][471957248]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
2012-03-10 12:07:09.675: [ CSSD][471957248]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
2012-03-10 12:07:09.675: [ CSSD][471957248]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
2012-03-10 12:07:09.675: [ CSSD][471957248]clssscmain: Running as user ora11g
[ clsdmt][1088276800]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
2012-03-10 12:07:09.821: [ clsdmt][1088276800]PID for the Process [5971], connkey 4
2012-03-10 12:07:09.822: [ CSSD][471957248]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
2012-03-10 12:07:09.823: [ CSSD][471957248]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
2012-03-10 12:07:09.847: [ CSSD][471957248]clssscmain: initgminfo done
2012-03-10 12:07:09.971: [ CSSD][1098766656]clssgmclientlsnr: Spawned
2012-03-10 12:07:09.971: [ CSSD][1098766656]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
2012-03-10 12:07:09.971: [ CSSD][1098766656]clssgmEvtInformation: reqtype (13) req (0xadd7b20)
2012-03-10 12:07:09.971: [ CSSD][1098766656]clssnmQueueNotification: type (13) 0xadd7b20
2012-03-10 12:07:09.973: [ CSSD][1098766656]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
2012-03-10 12:07:09.975: [ CSSD][1098766656]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=903cec19-00000000-5971))
2012-03-10 12:07:09.975: [ GPnP][471957248]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
2012-03-10 12:07:09.975: [ GPnP][471957248]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0xade1aa0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e1fdf67e-e0b9ca68-5971))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e0b9ca68-e1fdf67e-5976))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x1758, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: slos op : mkdir
2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: slos loc : authprep6
2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A2370613
2012-03-10 12:07:10.045: [GIPCXCPT][1098766656]gipcmodMuxTransferAccept: internal accept request failed endp 0xade0740 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=903cec19-00000000-5971))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
2012-03-10 12:07:10.045: [ GIPCMUX][1098766656]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0xade0740 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=903cec19-00000000-5971))', remoteAddr '', numPend 02012-03-10 12:21:34.610: [ CSSD][4216872704]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331400094
2012-03-10 12:21:34.612: [ CSSD][4216872704]clssscmain: Environment is production
2012-03-10 12:21:34.612: [ CSSD][4216872704]clssscmain: Core file size limit extended
2012-03-10 12:21:34.675: [ CSSD][4216872704]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
2012-03-10 12:21:34.675: [ CSSD][4216872704]clssscSetPrivEnv: IPMI device not installed on this node
2012-03-10 12:21:34.676: [ CSSD][4216872704]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
2012-03-10 12:21:34.770: [ CSSD][4216872704]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
2012-03-10 12:21:34.770: [ CSSD][4216872704]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
2012-03-10 12:21:34.771: [ CSSD][4216872704]clssscmain: Running as user ora11g
[ clsdmt][1123064128]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
2012-03-10 12:21:37.926: [ clsdmt][1123064128]PID for the Process [6687], connkey 4
2012-03-10 12:21:38.276: [ CSSD][4216872704]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
2012-03-10 12:21:38.276: [ CSSD][4216872704]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
2012-03-10 12:21:39.171: [ CSSD][4216872704]clssscmain: initgminfo done
2012-03-10 12:21:42.815: [ CSSD][1144043840]clssgmclientlsnr: Spawned
2012-03-10 12:21:42.815: [ CSSD][1144043840]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
2012-03-10 12:21:42.815: [ CSSD][1144043840]clssgmEvtInformation: reqtype (13) req (0x1a5a7160)
2012-03-10 12:21:42.815: [ CSSD][1144043840]clssnmQueueNotification: type (13) 0x1a5a7160
2012-03-10 12:21:42.822: [ CSSD][1144043840]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
2012-03-10 12:21:42.872: [ CSSD][1144043840]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=45c3536d-00000000-6687))
2012-03-10 12:21:42.873: [ GPnP][4216872704]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
2012-03-10 12:21:42.873: [ GPnP][4216872704]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0x1a5b10e0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=c53aa194-7b930898-6687))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=7b930898-c53aa194-5928))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x1728, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: slos op : mkdir
2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: slos loc : authprep6
2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A3702366
2012-03-10 12:21:43.201: [GIPCXCPT][1144043840]gipcmodMuxTransferAccept: internal accept request failed endp 0x1a5afd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=45c3536d-00000000-6687))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
2012-03-10 12:21:43.201: [ GIPCMUX][1144043840]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0x1a5afd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=45c3536d-00000000-6687))', remot2012-03-11 11:17:15.417: [ CSSD][1249378048]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331479035
2012-03-11 11:17:15.418: [ CSSD][1249378048]clssscmain: Environment is production
2012-03-11 11:17:15.418: [ CSSD][1249378048]clssscmain: Core file size limit extended
2012-03-11 11:17:15.797: [ CSSD][1249378048]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
2012-03-11 11:17:15.797: [ CSSD][1249378048]clssscSetPrivEnv: IPMI device not installed on this node
2012-03-11 11:17:15.798: [ CSSD][1249378048]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
2012-03-11 11:17:17.472: [ CSSD][1249378048]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
2012-03-11 11:17:17.472: [ CSSD][1249378048]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
2012-03-11 11:17:17.473: [ CSSD][1249378048]clssscmain: Running as user ora11g
[ clsdmt][1098090816]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
2012-03-11 11:17:17.517: [ clsdmt][1098090816]PID for the Process [5960], connkey 4
2012-03-11 11:17:17.573: [ CSSD][1249378048]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
2012-03-11 11:17:17.574: [ CSSD][1249378048]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
2012-03-11 11:17:17.586: [ CSSD][1249378048]clssscmain: initgminfo done
2012-03-11 11:17:17.617: [ CSSD][1141242176]clssgmclientlsnr: Spawned
2012-03-11 11:17:17.617: [ CSSD][1141242176]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
2012-03-11 11:17:17.617: [ CSSD][1141242176]clssgmEvtInformation: reqtype (13) req (0x129d5160)
2012-03-11 11:17:17.617: [ CSSD][1141242176]clssnmQueueNotification: type (13) 0x129d5160
2012-03-11 11:17:17.619: [ CSSD][1141242176]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
2012-03-11 11:17:17.621: [ CSSD][1141242176]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=38fc0b43-00000000-5960))
2012-03-11 11:17:17.621: [ GPnP][1249378048]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
2012-03-11 11:17:17.621: [ GPnP][1249378048]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0x129df0e0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=22574215-7bcb9bab-5960))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=7bcb9bab-22574215-5919))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x171f, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: slos op : mkdir
2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: slos loc : authprep6
2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A2554722
2012-03-11 11:17:18.168: [GIPCXCPT][1141242176]gipcmodMuxTransferAccept: internal accept request failed endp 0x129ddd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=38fc0b43-00000000-5960))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
2012-03-11 11:17:18.168: [ GIPCMUX][1141242176]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0x129ddd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=38fc0b43-00000000-5960))', remot2012-03-11 13:50:45.588: [ CSSD][1847344896]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331488245
2012-03-11 13:50:45.589: [ CSSD][1847344896]clssscmain: Environment is production
2012-03-11 13:50:45.589: [ CSSD][1847344896]clssscmain: Core file size limit extended
2012-03-11 13:50:45.812: [ CSSD][1847344896]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
2012-03-11 13:50:45.812: [ CSSD][1847344896]clssscSetPrivEnv: IPMI device not installed on this node
2012-03-11 13:50:45.813: [ CSSD][1847344896]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
2012-03-11 13:50:46.364: [ CSSD][1847344896]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
2012-03-11 13:50:46.364: [ CSSD][1847344896]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
2012-03-11 13:50:46.365: [ CSSD][1847344896]clssscmain: Running as user ora11g
[ clsdmt][1106819392]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
2012-03-11 13:50:46.512: [ clsdmt][1106819392]PID for the Process [5598], connkey 4
2012-03-11 13:50:46.518: [ CSSD][1847344896]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
2012-03-11 13:50:46.521: [ CSSD][1847344896]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
2012-03-11 13:50:46.548: [ CSSD][1847344896]clssscmain: initgminfo done
2012-03-11 13:50:46.611: [ CSSD][1090939200]clssgmclientlsnr: Spawned
2012-03-11 13:50:46.611: [ CSSD][1090939200]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
2012-03-11 13:50:46.611: [ CSSD][1090939200]clssgmEvtInformation: reqtype (13) req (0x196b6160)
2012-03-11 13:50:46.611: [ CSSD][1090939200]clssnmQueueNotification: type (13) 0x196b6160
2012-03-11 13:50:46.618: [ CSSD][1090939200]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
2012-03-11 13:50:46.621: [ CSSD][1090939200]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e5a0c08e-00000000-5598))
2012-03-11 13:50:46.621: [ GPnP][1847344896]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
2012-03-11 13:50:46.622: [ GPnP][1847344896]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0x196c00e0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=629302b2-9f0ad2aa-5598))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=9f0ad2aa-629302b2-5616))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x15f0, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: slos op : mkdir
2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: slos loc : authprep6
2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A8205079
2012-03-11 13:50:47.159: [GIPCXCPT][1090939200]gipcmodMuxTransferAccept: internal accept request failed endp 0x196bed80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e5a0c08e-00000000-5598))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
2012-03-11 13:50:47.159: [ GIPCMUX][1090939200]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0x196bed80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e5a0c08e-00000000-5598))', remot2012-03-11 14:15:32.370: [ CSSD][2372304640]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331489730
2012-03-11 14:15:32.383: [ CSSD][2372304640]clssscmain: Environment is production
2012-03-11 14:15:32.384: [ CSSD][2372304640]clssscmain: Core file size limit extended
2012-03-11 14:15:32.933: [ CSSD][2372304640]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
2012-03-11 14:15:32.933: [ CSSD][2372304640]clssscSetPrivEnv: IPMI device not installed on this node
2012-03-11 14:15:32.935: [ CSSD][2372304640]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
2012-03-11 14:15:48.413: [ CSSD][2372304640]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
2012-03-11 14:15:48.413: [ CSSD][2372304640]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
2012-03-11 14:15:48.421: [ CSSD][2372304640]clssscmain: Running as user ora11g
[ clsdmt][1119824192]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
2012-03-11 14:16:21.102: [ clsdmt][1119824192]PID for the Process [7155], connkey 4
2012-03-11 14:16:22.219: [ CSSD][2372304640]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
2012-03-11 14:16:22.221: [ CSSD][2372304640]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
2012-03-11 14:16:27.367: [ CSSD][2372304640]clssscmain: initgminfo done
2012-03-11 14:16:43.377: [ CSSD][1140803904]clssgmclientlsnr: Spawned
2012-03-11 14:16:43.378: [ CSSD][1140803904]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
2012-03-11 14:16:43.378: [ CSSD][1140803904]clssgmEvtInformation: reqtype (13) req (0x6964160)
2012-03-11 14:16:43.378: [ CSSD][1140803904]clssnmQueueNotification: type (13) 0x6964160
2012-03-11 14:16:43.389: [ CSSD][1140803904]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
2012-03-11 14:16:43.554: [ CSSD][1140803904]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=f8ea6223-00000000-7155))
2012-03-11 14:16:43.555: [ GPnP][2372304640]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
2012-03-11 14:16:43.555: [ GPnP][2372304640]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
2012-03-11 14:16:44.146: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0x696e0e0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=0448e4a3-ad06465f-7155))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=ad06465f-0448e4a3-7132))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x1bdc, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
2012-03-11 14:16:44.147: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: slos op : mkdir
2012-03-11 14:16:44.147: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
2012-03-11 14:16:44.147: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: slos loc : authprep6
2012-03-11 14:16:44.147: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A8989982
2012-03-11 14:16:44.147: [GIPCXCPT][1140803904]gipcmodMuxTransferAccept: internal accept request failed endp 0x696cd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=f8ea6223-00000000-7155))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
2012-03-11 14:16:44.147: [ GIPCMUX][1140803904]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0x696cd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=f8ea6223-00000000-7155))', remoteAddr[ora11g@rac1 cssd]$
My question is:
Could any folk find out the problem that Grid becomes not running after install RAC database ?
Thanks. -
Can i have same ORACLE_BASE directory location for Grid and RDBMS home ?
Grid Version:11.2.0.3
OS : RHEL 5.8
Can I have same ORACLE_BASE location for Grid (CRS) and RDBMS software Homes ?The OFA guideline for ORACLE_BASE is /u01/app/<owner>. If you are using the same owner for all software (let's call him "oracle") then a simple installation will have one base /u01/app/oracle. This base will be shared by all installations of Grid and RDBMS software. But, if you use two separate owners (let's call them grid and oracle) then you will have two separate ORACLE_BASE locations /u01/app/oracle and /u01/app/grid. I always use two separate owners, but I know many people who only use the oracle account and that is fine too.
Oracle allows every ORACLE_HOME to have a unique base. There is no requirement to install more than one ORACLE_HOME under a given ORACLE_BASE location. This is just an extension of what I said above, that the ORACLE_HOMEs for Grid and RDBMS can be stored under separate ORACLE_BASEs.
If you are using RAC then I strongly suggest you read chapter 1 of the Oracle Real Application Clusters Installation Guide. Read section "Overview of Oracle Base and Oracle Home Directories". The rules for ORACLE_BASE are as I noted above, but the rules for ORACLE_HOME change: the Grid ORACLE_HOME is not to be a sub-directory of the Grid ORACLE_BASE as it is when not using RAC. So, with RAC your directory structure might look more like this:
su -
umask 0022
mkdir -p /u01/app/oraInventory
# Grid Base
mkdir -p /u01/app/grid
# Grid Home
mkdir -p /u01/app/12.1.0.1/grid
# Oracle Base
mkdir -p /u01/app/oracle
# Oracle Home
mkdir -p /u01/app/oracle/product/12.1.0.1/db_1
# Ownership for all of the above...
chown grid:oinstall /u01/app/grid
chown grid:oinstall /u01/app/oraInventory
chown grid:oinstall /u01/app/12.1.0.1
chown grid:oinstall /u01/app/12.1.0.1/db_1
chown oracle:oinstall /u01/app/oracle
My examples show 12.1.0.1 but it's the same for 11.2.0.3.
There's no requirement to create the home directories prior to running the OUI. It can create them for you. I just shown these commands to help you understand the big picture.
The OUI will pop-up a warning if the Grid user's ORACLE_HOME is outside of his ORACLE_BASE as shown in the above mkdir commands, which is funny since it is the recommended setup in the Oracle RAC documentation. I submitted a bug report several years ago. To be consistent across all of my RAC and non-RAC servers I follow the more strict rules of RAC and use the mkdir commands shown above. -
Hi,
I am using LabVIEW to do some calculation. Since the number of digit of the input will affect my result so much, I want to fix the numeric control to 4 significant digits. When I right-click on the numeric control, there is an option to change the format and precision. Does anyone know can this function really change the precision of a number? Or this is only for display?
ThanksHI,
That formatting is only for display.
One way to do what you want is multiply your value by 10000 then round it to the nearest integer and then divide tha result by the same 10000.
Hope this helps,
Paulo
Maybe you are looking for
-
Strange error in JDeveloper 11.1.1.0 Technology Preview 4
I download starter workspace from http://www.oracle.com/technology/oramag/oracle/08-jul/o48frame.html A Home for Your Chrome and open in JDev 11g TP4 then go to Application Resources and change scott connection Oracle JDBC and test the connection I g
-
Iview Isolation Method property
Hi, The page contains 6 iviews, I created new iview and assigned to this page if refresh this iview complete page refreshing, I dont want this complete page refreshing only iview should refresh, for this reason I set isolation method property of ivi
-
Hello since this is my first post i am just going to say hello! I have a 8GB Iphone on the Rogers network in Canada and the 2.1 Update has done wonders to my phone i live kinda out in the sticks but am 5 minutes away from 3G Before i would get 2 to 3
-
I am having problems unlocking my iphone 5. I have received an email from my old provider confirming that the phone is being unlatched and I need to complete the process through itunes. I have backed up and restored but I have not received a message
-
Unable to sign in to e-print center
How do I sign in to the e-printer? It will not recognize my e-mail address.