Grid Installation for standalone server
Past few days I’ve been installing oracle 11g r2 Grid infrastructure (standalone ) 32 bit on vmware workstation. The installation process finished successfully and root.sh is launched, the following error appears:
“Failure with signal 11 from command: /u01/app/11.2.0/grid/bin/crsctl pin css -n linux1-m
Creating local-only OCR (/u01/app/11.2.0/grid/bin/crsctl pin css -n linux1-m) ... failed"
I have no idea about this error...
help would be appreciated in this!!!!!!!!!!
“Failure with signal 11 from commandOperating System (OS) error - Therefore OS change will be required to correct it.
Oracle is victim; not culprit.
Installing Oracle & RAC can be a challenge for some folks who refuse to Read The Fine Manual.
Including VM into the environment complicates the challenges even more so.
Good Luck!
Similar Messages
-
Blog Post: Grid Infrastructure installation for Standalone
I hope This document should be useful for who trying to install Grid infrastructure for Standalone server..., Expect comments Also.Read it Enjoy it.
http://mohamedazar.wordpress.com/2010/11/29/grid-infrastructure-installation-guide-for-standalone-server/Please check this metalink note:
OHASD Failed to Start: Inappropriate ioctl for device (Doc ID 1069182.1) -
How to install oracle 11gR2 Grid Infrastructure for standalond server
Hi Experts,
we do not want to install ASM. under this condition, does any expert install oracle 11gR2 Grid Infrastructure for standalone server in Linux 5 at file system?
Please share tip and experiences of installed oracle 11gR2 as single instance include install oracle 11gR2 Grid Infrastructure for standalone server in Linux 5. no one node RAC configuration.
If we do not install 11gR2 Grid Infrastructure for standalone server . which function will be lost? restat server only?
Thanks
JimGrid Infrastructure automatically uses Oracle Restart as default if you're installing Standalone. You can turn this off using crsctl ('disable has', I believe).
According to the inference in the install docs (http://download.oracle.com/docs/cd/E11882_01/install.112/e16763/oraclerestart.htm#CIHCBGCC), you can install 11gR2 without Grid Infrastructure, but you lose ASM and Restart. -
Oracle Grid Infrastructure 11g R2 for standalone server
hi experts
can you tell me how to install linux and Oracle Grid Infrastructure 11g R2 for standalone server.i need to create two diskgroup as well
please send me step by step document if you have
thanksuser1175505 wrote:
hi experts
can you tell me how to install linux and Oracle Grid Infrastructure 11g R2 for standalone server.i need to create two diskgroup as well
please send me step by step document if you have
thanksIt's all documented here http://download.oracle.com/docs/cd/E11882_01/install.112/e17212/toc.htm
Cheers -
Grid on a standalone server Cluster daemons not starting during server boot
Hi!I have installed Oracle Grid on a standalone server and setup Oracle db 11.2.0.2 on Oracle Linux 6.2 64 bit server.When I reoot the server and run crs_stat -t,several daemons havent started thus the ASM and db instances are also down as below
Name Type Target State Host
ora.DATA.dg ora....up.type OFFLINE OFFLINE
ora.FRADG.dg ora....up.type OFFLINE OFFLINE
ora....ER.lsnr ora....er.type ONLINE ONLINE amldb01dc
ora.amldb.db ora....se.type OFFLINE OFFLINE
ora.asm ora.asm.type OFFLINE OFFLINE
ora.cssd ora.cssd.type ONLINE OFFLINE
ora.diskmon ora....on.type ONLINE OFFLINE
ora.evmd ora.evm.type ONLINE ONLINE amldb01dc
ora.ons ora.ons.type OFFLINE OFFLINE
I am forced to manually start the daemons via command crsctl start resource -all then I manually start the ASM and db instances.
Yet when I run the commands
crsctl config has
CRS-4622: Oracle High Availability Services autostart is enabled.
crsctl check has
CRS-4638: Oracle High Availability Services is online.
Thus I would assume the daemons would start automatically during boot.
How can I resolve this?crstcl check crs seems not to be applicable to single instance but for RAC,since I have a single instance db,the output of the command is as below
crsctl check crs
Parse error:
'crs' is an invalid argument
Brief usage:
crsctl check has
Check status of OHAS.
There is no crsd.log in path /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/crsd.The output of crs_stat -t is already posted in initial post and output of entire alert log is as below
2012-07-03 16:18:35.975
[client(8182)]CRS-2101:The OLR was formatted using version 3.
2012-07-03 16:18:36.471
[client(8218)]CRS-1001:The OCR was formatted using version 3.
[client(8293)]CRS-10001:CRS-6021: No msg for has:crs-6021 [l][unlimited]
[client(8294)]CRS-10001:CRS-6021: No msg for has:crs-6021 [n][65536]
2012-07-03 16:18:42.528
[ohasd(8291)]CRS-2112:The OLR service started on node amldb01dc.
2012-07-03 16:18:42.538
[ohasd(8291)]CRS-1301:Oracle High Availability Service started on node amldb01dc.
2012-07-03 16:18:51.271
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(8465)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:1:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-03 16:18:52.299
[evmd(8479)]CRS-1401:EVMD started on node amldb01dc.
[client(8520)]CRS-10001:03-Jul-12 16:18 ACFS-9459: ADVM/ACFS is not supported on this OS version: 'error: file /etc/SuSE-release: No such file or directory
[client(8889)]CRS-10001:03-Jul-12 16:19 ACFS-9459: ADVM/ACFS is not supported on this OS version: 'error: file /etc/SuSE-release: No such file or directory
2012-07-03 16:19:22.600
[cssd(9014)]CRS-1713:CSSD daemon is started in local-only mode
2012-07-03 16:19:31.128
[cssd(9014)]CRS-1601:CSSD Reconfiguration complete. Active nodes are amldb01dc .
[client(10038)]CRS-10001:03-Jul-12 16:25 ACFS-9459: ADVM/ACFS is not supported on this OS version: 'error: file /etc/SuSE-release: No such file or directory
2012-07-03 16:34:13.791
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(8465)]CRS-5010:Update of configuration file "/u01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/oratab.bak.amldb01dc" failed: details at "(:CLSN00011:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-03 16:37:39.674
[ohasd(8291)]CRS-2765:Resource 'ora.DATA.dg' has failed on server 'amldb01dc'.
2012-07-03 16:37:43.636
[ohasd(8291)]CRS-2767:Resource state recovery not attempted for 'ora.asm' as its target state is OFFLINE
2012-07-03 16:38:06.905
[cssd(9014)]CRS-1603:CSSD on node amldb01dc shutdown by user.
2012-07-03 16:38:07.006
[cssd(9014)]CRS-1660:The CSS daemon shutdown has completed
2012-07-03 16:38:10.118
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(8465)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-03 16:42:09.578
[ohasd(4827)]CRS-2112:The OLR service started on node amldb01dc.
2012-07-03 16:42:09.649
[ohasd(4827)]CRS-1301:Oracle High Availability Service started on node amldb01dc.
2012-07-03 16:42:10.437
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:2:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-03 16:42:10.667
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-03 16:42:40.463
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5818:Aborted command 'check for resource: ora.DATA.dg amldb01dc 1' for resource 'ora.DATA.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-03 16:42:40.464
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5818:Aborted command 'check for resource: ora.FRADG.dg amldb01dc 1' for resource 'ora.FRADG.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-03 16:42:54.641
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5046)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:4:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-03 16:42:55.675
[evmd(5060)]CRS-1401:EVMD started on node amldb01dc.
2012-07-03 16:54:35.840
[cssd(5256)]CRS-1713:CSSD daemon is started in local-only mode
2012-07-03 16:54:44.396
[cssd(5256)]CRS-1601:CSSD Reconfiguration complete. Active nodes are amldb01dc .
2012-07-03 16:54:56.832
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5046)]CRS-5010:Update of configuration file "/u01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/oratab.bak.amldb01dc" failed: details at "(:CLSN00011:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:03:53.530
[ohasd(4827)]CRS-2767:Resource state recovery not attempted for 'ora.asm' as its target state is OFFLINE
2012-07-04 10:04:02.701
[cssd(5256)]CRS-1603:CSSD on node amldb01dc shutdown by user.
2012-07-04 10:04:02.809
[cssd(5256)]CRS-1660:The CSS daemon shutdown has completed
2012-07-04 10:04:03.008
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5046)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:07:48.492
[ohasd(4698)]CRS-2112:The OLR service started on node amldb01dc.
2012-07-04 10:07:48.534
[ohasd(4698)]CRS-1301:Oracle High Availability Service started on node amldb01dc.
2012-07-04 10:07:49.059
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4946)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:1:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:07:49.192
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4946)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:08:19.085
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4946)]CRS-5818:Aborted command 'check for resource: ora.DATA.dg amldb01dc 1' for resource 'ora.DATA.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:08:19.093
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4946)]CRS-5818:Aborted command 'check for resource: ora.FRADG.dg amldb01dc 1' for resource 'ora.FRADG.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:08:33.278
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5053)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:4:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:08:34.319
[evmd(5069)]CRS-1401:EVMD started on node amldb01dc.
2012-07-04 10:27:13.716
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5053)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:30:57.260
[ohasd(4619)]CRS-2112:The OLR service started on node amldb01dc.
2012-07-04 10:30:57.280
[ohasd(4619)]CRS-1301:Oracle High Availability Service started on node amldb01dc.
2012-07-04 10:30:57.660
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:1:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:30:57.784
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:31:27.685
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5818:Aborted command 'check for resource: ora.FRADG.dg amldb01dc 1' for resource 'ora.FRADG.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:31:27.685
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5818:Aborted command 'check for resource: ora.DATA.dg amldb01dc 1' for resource 'ora.DATA.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:31:41.868
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5168)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:4:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:31:42.916
[evmd(5184)]CRS-1401:EVMD started on node amldb01dc.
2012-07-04 10:39:17.166
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5168)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:43:01.219
[ohasd(4575)]CRS-2112:The OLR service started on node amldb01dc.
2012-07-04 10:43:01.240
[ohasd(4575)]CRS-1301:Oracle High Availability Service started on node amldb01dc.
2012-07-04 10:43:01.643
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4971)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:1:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:43:01.781
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4971)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:43:31.680
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4971)]CRS-5818:Aborted command 'check for resource: ora.FRADG.dg amldb01dc 1' for resource 'ora.FRADG.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:43:31.680
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4971)]CRS-5818:Aborted command 'check for resource: ora.DATA.dg amldb01dc 1' for resource 'ora.DATA.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:43:45.864
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5120)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:4:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:43:46.915
[evmd(5136)]CRS-1401:EVMD started on node amldb01dc. -
Offline installer for Lion Server? Can it be done?
Hi guys,
/rant
Before I get to the topic of this post let me state, the claimed download size for Lion Server is WAAAAAY off the +14MB they say it is. I have reinstalled it few times now and this time around I monitored the download and it came in at the +200MB mark!!! Sure, maybe the initial installer is only 14MB but it pulls down another +200MB when setting it up. Why is this not mentioned on the App Store page? Surely we should be told about such a large additional download.
/end rant
Can anyone tell me if its possible to make an offline installer for Lion Server, in the same way that it can be done for the Lion client?
I have been tinkering with it a lot and have had to reinstall a few times and would prefer to not have to download 200MB everytime I screw something up, if it can be avoided.
Thanks in advance.Hi defecta,
i have the same problem. I had to install a new server with lion at the cusomers site in a heavy military bunker below earth and no internet around. I was allowed to bring the server up to surface and give it internet with a myfi. As you can imagine it took some hours to download on a bad mobile connection out in the woods. I do know i have to install that server from scratch after it has been tested.
Have you or anyone else been able to capture the download? Is there a place to get an offline install package, a DVD or Stick. Sadly its to late now to image that server after fresh install. -
11.2.0.2 Grid Installation for a Standalone Server FAILED!
OS: OEL-5.5 x86_64 (kernel-2.6.18-194.17.4.0.1.el5, glibc-2.5-49.el5_5.7)
Product: Oracle 11gR2 (11.2.0.2.0) x86_64 for Linux
Hi,
I was trying to perform a clean and full 11.2.0.2 installation for a Standalone Server (Single database + ASM + Restart), but unlike 11.2.0.1, this standalone patch, shipped as set of full installation files, has serious flaws mainly due to insane installation and configuration scripts. My environment is as follows:
ORACLE_BASE=/opt/oracle
ORACLE_HOME=/opt/oracle/product/11.2.0/db_1
GRID_HOME=/opt/oracle/product/11.2.0/grid
all owned by oracle:dba. ASMLib was configured with four 256 GB partitions on four physical disks.
1. During grid installation the Prepare, Copy files, Link binaries, Setup files, Execute Root Scripts (root.sh), Update Inventory, Oracle Net Configuration Assistant all succeeded, but ASM Configuration Assistant FAILED and installation couldn't continue. That was because root.sh script (and inside it calling scripts) changed the ownership of ORACLE_BASE and GRID_HOME to root:dba, so that admin and diag directories creations in ORACLE_BASE were not permitted. After fixing that manually as root (immediately after executing root.sh), the installation continues and succeeds.
2. During installation of Client software the error message window appears stating that cannot find the /opt/oracle/product/11.2.0/db_1/oui/bin/runInstaller.var file. By pressing the Continue button the installation continues ignoring this.
3. If Oracle Scheduler Agent is selected for installation during Client software installation, the Oracle Enterprise Manager 11g Database Control Release 11.2.0.2.0 cannot start (https problem - cannot establish connection). To fix this, I had to deinstall Client software and install it again without Oracle Scheduler Agent.
4. The Performance window in Enterprise Manager 11g Database Control Release 11.2.0.2.0 cannot display any graph ("Initializing" and "Transferring data from localhost..." never end).
Are those issues known issues? If they are, why did Oracle ship that standalone patch without testing it before? Given that prior release (11.2.0.1) was free of any errors above, it is really beyond me to figure out this negligence.
NJAre those issues known issues? Have you created service request ? That would be much better to be sure about the workaround you found.
Nicolas. -
Oracle Install Based on ASM for Standalone Server
I am trying to install Oracle 11g R2 on a standalone server. I will use the ASM and create database on it. The following is my installation plans:
PLAN A
1) Use asmlib/oracleasm to prepare the disk for ASM
2) Install Grid Infrastructure with ASM installed (using OUI)
3) Install Oracle software. During the installation process, create a database based on the ASM created in earlier process.
</br></br>
PLAN B
1) Install Oracle software without creating a database
2) Use asmlib/oracleasm to prepare the disk for ASM
3) Install Grid Infrastructure with ASM installed (using OUI)
4) Create database based on the ASM created in earlier process (using OUI)
Please verify if I am on the right track? If so, which plan is better?
Thanks
ScottGo for Plan A.
you can build it without PSU as well.
however PSU not available on any free site ,to download it you need oracle metalink access which come when you purchase oracle software.
Also note:-Patch Set 11.2.0.3 for Linux, Solaris, Windows, AIX and HP-UX Itanium is now available on support.oracle.com. Note: it is a full installation (you do not need to download 11.2.0.1 first).
Please close the thread if you feel you have the answer and keep the Oracle forum clean.
https://forums.oracle.com/forums/ann.jspa?annID=885 -
OEPE installation for production server
Does Oracle Enterprise Pack for Eclipse (OEPE) is required for WebLogic server installation (SOA 11g) for production environment ?
Or this is needed only when you need to develop some some SOA stuff ..I got the answer that this is needed for OSB 11g.
-
Minimum Solaris installation for Directory Server
Hello,
i want to set up a new Solaris installation for Sun ONE directory server.
But i don't want to install always the "entire distribution" and then turn off all services. I want to keep the solaris os installation as small as possible. Has anybody tried this before and can report some experiences? Is the "reduced network" cluster the right way to go or better the "core" cluster? Does anybody have a list of the packages which must be installed after a minimal solaris installation for the ds to work?
Thanks a lot,
af_inetSince you original question is "minimum requirement
at the SERVER", I would say that X is not really
needed at the server end if you use installer text
mode CLI (command is "./installer -nodisplay")
instead of installer graphical mode (GUI). However,
to fix uninstall/reinstall issue, X is needed as the
"prodreg" which is used to uninstall packages is a X
program, without text mode option.This is correct.
It is not a must to run ./startconsole (X program)
LOCALLY so as to perform DS admin functions as you
could always run SUN ONE Console REMOTELY from any
remote host (Windows or UNIX/Linux) with just the
console binaries installed. (for large data centre
env. the LDAP server is usually locked in server room
away from your desk and you tend to use remote admin
console).This is correct too. I think it's a matter of taste if i want to install console on the DS itself or on a separate host. As long as i have only one DS i will leave it on the machine itself. But you are right, this is not a must. So i should have asked my question more precicely :-)
Thank you very much,
Chris -
Install Oracle Grid Infrastructure 11g R2 for standalone server
just installing locally for my awareness
which linux is better
red hat linux 5 or oracle linux
actually i heard oracle linux have packages rpm in built?
suggest me which o/s is better and suggest me any better link than below to do the task
How to Install Oracle 11g on Linux with ASM - Oracle Database.htm
http://oracledatabase.wikidot.com/startdocshowtoinstalloracle11glinuxasm
http://www.thegeekstuff.com/2008/10/oracle-11g-step-by-step-installation-guide-with-screenshots/
your suggestion ..................problems we face when we are installing please let me know
thankshttp://download.oracle.com/docs/cd/E11882_01/install.112/e17212/toc.htm
Oracle Linux 5 + http://public-yum.oracle.com/ -
Asmca hangs during grid installation on windows server 2008 r2 x64
Hi all,
searched the web, but did not found a solution to this right now.
The Grid Infrastructure installation (11.2.0.2) hangs every time i tried the installation (Basic, Advanced) on a two node configuration. Had the same issue with 11.2.0.1.
Environment:
- W2K8 Server EE x64, all patches installed
- FC Storage attached
- UAC disabled
- Firewall diabled
- Prereqs implemented as recommended by RAC Assurance Team
- Using Domain-User (Member of the local Administrator Group) for installation
- Public-IPs and SCAN-IPs in DNS has been configured
- GNS and IMPI not used
Used diskpart to create extended partition and logical partition as described in the manuals. Stamped GRID-disk using asmtoolg.
Whatever I tried, asmca seems to hang while creating the diskgroup for OCR/Voting ...
... maybe someone out there has an idea what may cause this?
Some logs that explain the problem:
cluvfy
C:\install\11.2.0.2\grid>runcluvfy.bat stage -pre crsinst -n BKO-dbqc01,BKO-dbqc
02 -verbose
Vorpr³fungen f³r Cluster-Services-Setup werden ausgef³hrt.
Knotenzugõnglichkeit wird gepr³ft...
Pr³fung: Knotenzugõnglichkeit von Knoten "BKO-dbqc01"
Zielknoten Zugõnglich?
BKO-dbqc02 ja
BKO-dbqc01 ja
Ergebnis: Pr³fung auf Knotenzugõnglichkeit von Knoten "BKO-dbqc01" erfolgreich
Benutzerõquivalenz wird ³berpr³ft...
Pr³fung: Benutzerõquivalenz f³r Benutzer "sup-bko-him"
Knotenname Kommentar
BKO-dbqc02 erfolgreich
BKO-dbqc01 erfolgreich
Ergebnis: Pr³fung auf Benutzerõquivalenz erfolgreich f³r Benutzer "sup-bko-him"
Knotenkonnektivitõt wird gepr³ft...
Schnittstelleninformationen f³r Knoten "BKO-dbqc02"
Name IP-Adresse Subnet Gateway Standard-Gateway HW-Adre
sse MTU
PublicLAN 10.0.145.35 10.0.144.0 On-link UNKNOWN D4:85
:64:C8:A3:FA 1500
PrivateLAN 192.168.123.4 192.168.123.0 On-link UNKNOWN D4:8
5:64:C8:A3:FE 1500
Schnittstelleninformationen f³r Knoten "BKO-dbqc01"
Name IP-Adresse Subnet Gateway Standard-Gateway HW-Adre
sse MTU
PublicLAN 10.0.145.32 10.0.144.0 On-link UNKNOWN D4:85
:64:C9:28:3E 1500
PrivateLAN 192.168.123.2 192.168.123.0 On-link UNKNOWN D4:8
5:64:C9:28:42 1500
Pr³fung: Knotenkonnektivitõt von Subnet "10.0.144.0"
Quelle Ziel Angemeldet?
BKO-dbqc02[10.0.145.35] BKO-dbqc01[10.0.145.32] ja
Ergebnis: Pr³fung auf Knotenkonnektivitõt f³r Subnet "10.0.144.0" mit Knoten BKO
-dbqc02,BKO-dbqc01 erfolgreich
Pr³fung: TCP-Konnektivitõt von Subnet "10.0.144.0"
Quelle Ziel Angemeldet?
BKO-dbqc01:10.0.145.32 BKO-dbqc02:10.0.145.35 erfolgreich
Ergebnis: Pr³fung der TCP-Konnektivitõt f³r Subnet "10.0.144.0" erfolgreich
Pr³fung: Knotenkonnektivitõt von Subnet "192.168.123.0"
Quelle Ziel Angemeldet?
BKO-dbqc02[192.168.123.4] BKO-dbqc01[192.168.123.2] ja
Ergebnis: Pr³fung auf Knotenkonnektivitõt f³r Subnet "192.168.123.0" mit Knoten
BKO-dbqc02,BKO-dbqc01 erfolgreich
Pr³fung: TCP-Konnektivitõt von Subnet "192.168.123.0"
Quelle Ziel Angemeldet?
BKO-dbqc01:192.168.123.2 BKO-dbqc02:192.168.123.4 erfolgreich
Ergebnis: Pr³fung der TCP-Konnektivitõt f³r Subnet "192.168.123.0" erfolgreich
Folgende Schnittstellen wurden auf Subnet "10.0.144.0" gefunden, die f³r ein Pri
vate Interconnect in Frage kommen:
BKO-dbqc02 PublicLAN:10.0.145.35
BKO-dbqc01 PublicLAN:10.0.145.32
Folgende Schnittstellen wurden auf Subnet "192.168.123.0" gefunden, die f³r ein
Private Interconnect in Frage kommen:
BKO-dbqc02 PrivateLAN:192.168.123.4
BKO-dbqc01 PrivateLAN:192.168.123.2
WARNING:
Es konnte keine geeignete Schnittstellengruppe f³r VIPs gefunden werden
Ergebnis: Pr³fung auf Knotenkonnektivitõt erfolgreich
Pr³fen: Gesamter Speicher
Knotenname Verf³gbar Erforderlich Kommentar
BKO-dbqc02 7,99GB (8378164.0KB) 922MB (944128.0KB) erfolgreich
BKO-dbqc01 7,99GB (8378164.0KB) 922MB (944128.0KB) erfolgreich
Ergebnis: Gesamter Speicher ▄berpr³fung erfolgreich
Pr³fen: Verf³gbarer Speicher
Knotenname Verf³gbar Erforderlich Kommentar
BKO-dbqc02 6,6797GB (7004176.0KB) 50MB (51200.0KB) erfolgreich
BKO-dbqc01 5,7739GB (6054412.0KB) 50MB (51200.0KB) erfolgreich
Ergebnis: Verf³gbarer Speicher ▄berpr³fung erfolgreich
Pr³fen: Swap-Bereich
Knotenname Verf³gbar Erforderlich Kommentar
BKO-dbqc02 15,9783GB (1.6754428E7KB) 7,99GB (8378164.0KB) erfolgreich
BKO-dbqc01 15,9783GB (1.6754428E7KB) 7,99GB (8378164.0KB) erfolgreich
Ergebnis: Swap-Bereich ▄berpr³fung erfolgreich
Pr³fen: Freier Datentrõgerspeicher f³r "BKO-dbqc02:C:\Windows\temp"
Pfad Knotenname Mount Point Verf³gbar Erforderlich Komm
entar
C:\Windows\temp BKO-dbqc02 C 105,3048GB 1GB erfo
lgreich
Ergebnis: Freier Datentrõgerspeicher ▄berpr³fung erfolgreich f³r "BKO-dbqc02:C:\
Windows\temp"
Pr³fen: Freier Datentrõgerspeicher f³r "BKO-dbqc01:C:\Windows\temp"
Pfad Knotenname Mount Point Verf³gbar Erforderlich Komm
entar
C:\Windows\temp BKO-dbqc01 C 91,5306GB 1GB erfo
lgreich
Ergebnis: Freier Datentrõgerspeicher ▄berpr³fung erfolgreich f³r "BKO-dbqc01:C:\
Windows\temp"
Pr³fen: Systemarchitektur
Knotenname Verf³gbar Erforderlich Kommentar
BKO-dbqc02 64-bit 64-bit erfolgreich
BKO-dbqc01 64-bit 64-bit erfolgreich
Ergebnis: Systemarchitektur ▄berpr³fung erfolgreich
Lõnge des Wertes der Umgebungsvariable "PATH" wird gepr³ft
Pr³fung: Lõnge des Wertes der Umgebungsvariable "PATH"
Knotenname Festgelegt? Maximale Lõnge Aktuelle Lõnge Kommentar
BKO-dbqc02 ja 1023 136 erfolgreich
BKO-dbqc01 ja 1023 189 erfolgreich
Ergebnis: Pr³fung auf Lõnge des Wertes der Umgebungsvariable "PATH" erfolgreich.
Pr³fung auf Media Sensing-Status von TCP/IP
Knotenname Aktiviert? Kommentar
BKO-dbqc02 nein erfolgreich
BKO-dbqc01 nein erfolgreich
Ergebnis: Pr³fung auf Media Sensing-Status von TCP/IP erfolgreich
Uhrensynchronisationspr³fungen mit dem Network Time Protocol (NTP) werden gestar
tet...
Es wird gepr³ft, ob Daemon aktiv ist...
Pr³fung: Aktiv f³r "W32Time"
Knotenname Wird ausgef³hrt?
BKO-dbqc02 ja
BKO-dbqc01 ja
Ergebnis: Aktivitõtspr³fung erfolgreich f³r "W32Time"
Pr³fung, ob der NTP-Daemon oder -Service aktiv ist, war auf allen Knoten erfolgr
eich
Ergebnis: Uhrensynchronisationspr³fung mit Network Time Protocol (NTP) erfolgrei
ch
Es wird gepr³ft, ob der aktuelle Benutzer ein Domain-Benutzer ist ...
Es wird gepr³ft, ob Benutzer "sup-bko-him" ein Domain-Benutzer ist
Ergebnis: Benutzer "sup-bko-him" ist Bestandteil der Domain "EUROPE"
Pr³fen: Zeitzonenkonsistenz
Ergebnis: Zeitzonenkonsistenz ▄berpr³fung erfolgreich
Pr³fung auf Status des Features zur automatischen Bereitstellung
Knotenname Aktiviert? Kommentar
BKO-dbqc02 ja erfolgreich
BKO-dbqc01 ja erfolgreich
Ergebnis: Pr³fung auf Status des Features zur automatischen Bereitstellung erfol
greich
Vorpr³fung f³r Cluster-Services-Setup war erfolgreich.
C:\install\11.2.0.2\grid>
* All tests were successful, sorry for the german :-) *
rootcrs log
... cutted ...
2010-12-22 21:21:01: Executing cmd: C:\grid\bin\crsctl check css
2010-12-22 21:21:01: Command output:
CRS-4529: Cluster Synchronization Services ist online
End Command output2010-12-22 21:21:01: CRS-2672: Versuch, "ora.mdnsd" auf "bko-dbqc01" zu starten
2010-12-22 21:21:01: CRS-2676: Starten von "ora.mdnsd" auf "bko-dbqc01" erfolgreich
2010-12-22 21:21:01: CRS-2672: Versuch, "ora.gpnpd" auf "bko-dbqc01" zu starten
2010-12-22 21:21:01: CRS-2676: Starten von "ora.gpnpd" auf "bko-dbqc01" erfolgreich
2010-12-22 21:21:01: CRS-2672: Versuch, "ora.cssdmonitor" auf "bko-dbqc01" zu starten
2010-12-22 21:21:01: CRS-2672: Versuch, "ora.gipcd" auf "bko-dbqc01" zu starten
2010-12-22 21:21:01: CRS-2676: Starten von "ora.gipcd" auf "bko-dbqc01" erfolgreich
2010-12-22 21:21:01: CRS-2676: Starten von "ora.cssdmonitor" auf "bko-dbqc01" erfolgreich
2010-12-22 21:21:01: CRS-2672: Versuch, "ora.cssd" auf "bko-dbqc01" zu starten
2010-12-22 21:21:01: CRS-2676: Starten von "ora.cssd" auf "bko-dbqc01" erfolgreich
2010-12-22 21:21:01: Querying for existing CSS voting disks
2010-12-22 21:21:01: Performing initial configuration for cluster
2010-12-22 21:21:01: Executing cmd: C:\grid\bin\crsctl start resource ora.ctssd -init
2010-12-22 21:21:04: Command output:
CRS-2672: Versuch, "ora.ctssd" auf "bko-dbqc01" zu starten
CRS-2676: Starten von "ora.ctssd" auf "bko-dbqc01" erfolgreich
End Command output2010-12-22 21:21:04: Start of resource "ora.ctssd" Succeeded
2010-12-22 21:21:04: Configuring ASM via ASMCA
2010-12-22 21:21:05: Executing as europe\sup-bko-him: C:\grid\bin\asmca -silent -diskGroupName GRID -diskList '\\.\ORCLDISKGRID0' -redundancy EXTERNAL -configureLocalASM
2010-12-22 21:21:05: Running as user europe\sup-bko-him: C:\grid\bin\asmca -silent -diskGroupName GRID -diskList '\\.\ORCLDISKGRID0' -redundancy EXTERNAL -configureLocalASM
2010-12-22 21:21:05: s_run_as_user: Running C:\grid\bin\asmca -silent -diskGroupName GRID -diskList '\\.\ORCLDISKGRID0' -redundancy EXTERNAL -configureLocalASM
2010-12-22 21:21:05: Executing C:\grid\bin\asmca -silent -diskGroupName GRID -diskList '\\.\ORCLDISKGRID0' -redundancy EXTERNAL -configureLocalASM
2010-12-22 21:21:05: Executing cmd: C:\grid\bin\asmca -silent -diskGroupName GRID -diskList '\\.\ORCLDISKGRID0' -redundancy EXTERNAL -configureLocalASM
*^^ hangs here*
asmca log:
... cutted ...
[Finalizer] [ 2010-12-22 21:21:15.070 CET ] [ClusterUtil.finalize:102] ClusterUtil: finalized called for oracle.ops.mgmt.has.ClusterUtil@68814013
[main] [ 2010-12-22 21:21:15.128 CET ] [OracleHome.getVersion:953] Current Version From Inventory: null
[main] [ 2010-12-22 21:21:15.129 CET ] [OracleHome.getVersion:960] using sqlplus: C:\grid\bin\sqlplus.exe
[main] [ 2010-12-22 21:21:15.174 CET ] [OracleHome.getVersion:1001] C:\grid\bin\sqlplus.exe Banner:
SQL*Plus: Release 11.2.0.2.0 Production
[main] [ 2010-12-22 21:21:15.174 CET ] [OracleHome.getVersion:1019] Current version from sqlplus: 11.2.0.2.0
[main] [ 2010-12-22 21:21:15.175 CET ] [OracleHome.getVersion:885] OracleHome.getVersion called. Current Version: 11.2.0.2.0
[main] [ 2010-12-22 21:21:15.175 CET ] [OracleHome.getVersion:953] Current Version From Inventory: 11.2.0.2.0
[main] [ 2010-12-22 21:21:15.175 CET ] [OracleHome.getVersion:885] OracleHome.getVersion called. Current Version: 11.2.0.2.0
[main] [ 2010-12-22 21:21:15.176 CET ] [OracleHome.getVersion:953] Current Version From Inventory: 11.2.0.2.0
[main] [ 2010-12-22 21:21:15.176 CET ] [SQLPlusEngine.getCmmdParams:222] m_home 11.2.0.2.0
[main] [ 2010-12-22 21:21:15.176 CET ] [SQLPlusEngine.getCmmdParams:223] version > 112 true
[main] [ 2010-12-22 21:21:15.177 CET ] [SQLEngine.getEnvParams:552] Default NLS_LANG: GERMAN_GERMANY.AL32UTF8
[main] [ 2010-12-22 21:21:15.177 CET ] [SQLEngine.getEnvParams:562] NLS_LANG: GERMAN_GERMANY.AL32UTF8
[main] [ 2010-12-22 21:21:15.178 CET ] [SQLEngine.initialize:322] Execing SQLPLUS/SVRMGR process...
[main] [ 2010-12-22 21:21:15.180 CET ] [SQLEngine.initialize:359] m_bReaderStarted: false
[main] [ 2010-12-22 21:21:15.180 CET ] [SQLEngine.initialize:363] Starting Reader Thread...
[main] [ 2010-12-22 21:21:15.226 CET ] [UsmcaLogger.logExit:123] Exiting oracle.sysman.assistants.usmca.backend.USMInstance Method : createSQLEngine
[main] [ 2010-12-22 21:21:15.227 CET ] [OracleHome.getVersion:885] OracleHome.getVersion called. Current Version: null
[main] [ 2010-12-22 21:21:15.229 CET ] [InventoryUtil.getOUIInvSession:347] setting OUI READ level to ACCESSLEVEL_READ_LOCKLESS
[main] [ 2010-12-22 21:21:15.229 CET ] [OracleHome.getVersion:904] Homeinfo C:\grid,1
[main] [ 2010-12-22 21:21:15.318 CET ] [OracleHome.getVersion:953] Current Version From Inventory: null
[main] [ 2010-12-22 21:21:15.318 CET ] [OracleHome.getVersion:960] using sqlplus: C:\grid\bin\sqlplus.exe
[main] [ 2010-12-22 21:21:15.369 CET ] [OracleHome.getVersion:1001] C:\grid\bin\sqlplus.exe Banner:
SQL*Plus: Release 11.2.0.2.0 Production
[main] [ 2010-12-22 21:21:15.369 CET ] [OracleHome.getVersion:1019] Current version from sqlplus: 11.2.0.2.0
[main] [ 2010-12-22 21:21:15.370 CET ] [UsmcaLogger.logInfo:142] Role SYSASM
[main] [ 2010-12-22 21:21:15.370 CET ] [UsmcaLogger.logInfo:142] OS Auth true
[main] [ 2010-12-22 21:21:15.777 CET ] [SQLEngine.done:2167] Done called
[main] [ 2010-12-22 21:21:15.778 CET ] [UsmcaLogger.logException:172] SEVERE:method oracle.sysman.assistants.usmca.backend.USMInstance:configureLocalASM
[main] [ 2010-12-22 21:21:15.778 CET ] [UsmcaLogger.logException:173] ORA-01034: ORACLE not available
[main] [ 2010-12-22 21:21:15.779 CET ] [UsmcaLogger.logException:174] oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-01034: ORACLE not available
oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1655)
oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeQuery(SQLEngine.java:828)
oracle.sysman.assistants.usmca.backend.USMInstance.configureLocalASM(USMInstance.java:3003)
oracle.sysman.assistants.usmca.service.UsmcaService.configureLocalASM(UsmcaService.java:1049)
oracle.sysman.assistants.usmca.model.UsmcaModel.performConfigureLocalASM(UsmcaModel.java:926)
oracle.sysman.assistants.usmca.model.UsmcaModel.performOperation(UsmcaModel.java:779)
oracle.sysman.assistants.usmca.Usmca.execute(Usmca.java:174)
oracle.sysman.assistants.usmca.Usmca.main(Usmca.java:369)
[main] [ 2010-12-22 21:21:15.779 CET ] [UsmcaLogger.logEntry:114] Entering oracle.sysman.assistants.usmca.backend.USMInstance Method : createSQLEngine
[main] [ 2010-12-22 21:21:15.779 CET ] [SQLEngine.done:2167] Done called
[main] [ 2010-12-22 21:21:15.780 CET ] [OracleHome.getVersion:885] OracleHome.getVersion called. Current Version: null
[main] [ 2010-12-22 21:21:15.782 CET ] [InventoryUtil.getOUIInvSession:347] setting OUI READ level to ACCESSLEVEL_READ_LOCKLESS
[main] [ 2010-12-22 21:21:15.783 CET ] [OracleHome.getVersion:904] Homeinfo C:\grid,1
[main] [ 2010-12-22 21:21:15.874 CET ] [OracleHome.getVersion:953] Current Version From Inventory: null
[main] [ 2010-12-22 21:21:15.874 CET ] [OracleHome.getVersion:960] using sqlplus: C:\grid\bin\sqlplus.exe
[main] [ 2010-12-22 21:21:15.926 CET ] [OracleHome.getVersion:1001] C:\grid\bin\sqlplus.exe Banner:
SQL*Plus: Release 11.2.0.2.0 Production
[main] [ 2010-12-22 21:21:15.926 CET ] [OracleHome.getVersion:1019] Current version from sqlplus: 11.2.0.2.0
[main] [ 2010-12-22 21:21:15.926 CET ] [OracleHome.getVersion:885] OracleHome.getVersion called. Current Version: 11.2.0.2.0
[main] [ 2010-12-22 21:21:15.927 CET ] [OracleHome.getVersion:953] Current Version From Inventory: 11.2.0.2.0
[main] [ 2010-12-22 21:21:15.927 CET ] [OracleHome.getVersion:885] OracleHome.getVersion called. Current Version: 11.2.0.2.0
[main] [ 2010-12-22 21:21:15.927 CET ] [OracleHome.getVersion:953] Current Version From Inventory: 11.2.0.2.0
[main] [ 2010-12-22 21:21:15.928 CET ] [SQLPlusEngine.getCmmdParams:222] m_home 11.2.0.2.0
[main] [ 2010-12-22 21:21:15.928 CET ] [SQLPlusEngine.getCmmdParams:223] version > 112 true
[main] [ 2010-12-22 21:21:15.928 CET ] [SQLEngine.getEnvParams:552] Default NLS_LANG: GERMAN_GERMANY.AL32UTF8
[main] [ 2010-12-22 21:21:15.929 CET ] [SQLEngine.getEnvParams:562] NLS_LANG: GERMAN_GERMANY.AL32UTF8
[main] [ 2010-12-22 21:21:15.929 CET ] [SQLEngine.initialize:322] Execing SQLPLUS/SVRMGR process...
[main] [ 2010-12-22 21:21:15.931 CET ] [SQLEngine.initialize:359] m_bReaderStarted: false
[main] [ 2010-12-22 21:21:15.932 CET ] [SQLEngine.initialize:363] Starting Reader Thread...
[main] [ 2010-12-22 21:21:15.982 CET ] [UsmcaLogger.logExit:123] Exiting oracle.sysman.assistants.usmca.backend.USMInstance Method : createSQLEngine
[main] [ 2010-12-22 21:21:15.983 CET ] [OracleHome.getVersion:885] OracleHome.getVersion called. Current Version: null
[main] [ 2010-12-22 21:21:15.985 CET ] [InventoryUtil.getOUIInvSession:347] setting OUI READ level to ACCESSLEVEL_READ_LOCKLESS
[main] [ 2010-12-22 21:21:15.986 CET ] [OracleHome.getVersion:904] Homeinfo C:\grid,1
[main] [ 2010-12-22 21:21:16.079 CET ] [OracleHome.getVersion:953] Current Version From Inventory: null
[main] [ 2010-12-22 21:21:16.079 CET ] [OracleHome.getVersion:960] using sqlplus: C:\grid\bin\sqlplus.exe
[main] [ 2010-12-22 21:21:16.132 CET ] [OracleHome.getVersion:1001] C:\grid\bin\sqlplus.exe Banner:
SQL*Plus: Release 11.2.0.2.0 Production
[main] [ 2010-12-22 21:21:16.133 CET ] [OracleHome.getVersion:1019] Current version from sqlplus: 11.2.0.2.0
[main] [ 2010-12-22 21:21:16.133 CET ] [UsmcaLogger.logInfo:142] Role SYSASM
[main] [ 2010-12-22 21:21:16.133 CET ] [UsmcaLogger.logInfo:142] OS Auth true
*^^no further entries here, so hangs, too*hmm, it is getting more misterious:
if i enable DTrace on the asmca-commandline (-DTRACING.ENABLED=true -DTRACING.LEVEL=2), asmca works ... -
Oracle 9i Client Installation for Windows Server 2003
Hello All,
How do I install the 9i client on Win Server 2003? I can't find any instructions...
Is it just download the 2 files and install in that order?
http://www.oracle.com/technology/software/products/oracle9i/htdocs/win2k3soft.html
Thanks!
Message was edited by:
user517416Have you read the doc linked on the page which you gave ?
http://download-uk.oracle.com/docs/html/B10924_01/toc.htm
Moreover, you have the documentation installation guide for Windows :
http://download-west.oracle.com/docs/html/A95493_01/toc.htm
Nicolas. -
Minimum installation for client server.
What are the minimum Oracle8 installations on the client and
server to establish a connection using TCP/IP protocol?
Thanks in advance.
nullHi Mac4lfe: If you want to SYNCH between the Mac and the ATV, then any G3 will do, just expect the synching to be slow. If you want to STREAM from the Mac to ATV, then a G3 will do for music but not for video. If you want to stream video, a G4 will do, but you will get a lot of beachballs when you do anything on iTunes and sometimes the streaming will fail. I suggest you get the cheapest Intel Mac, you will have a much better experience when streaming. Lastly, remember you will need a screen for the Mini, there will always be warnings, error messages, updates, etc in iTunes that you need a screen, mouse and keyboard for. Very lastly, you can just get the ATV and buy music, TV shows, Movies and rent movies without a Mac. 160GP shall be enough. I have 40 movies, 20 full TV seasons and 6000 songs and am just over 400GB.
-
Oracle 11gr2 database installation using ASM on standalone Server.
Hello Guys,
Environment is as below:
Oracle 11gr2
ASM
Enterprise Linux Server release 5.5 (Carthage)
I never did oracle 11gr2 installation using ASM and I need to install Oracle software on standalone server and then create database 11g Release 2.
I have following doubts:
1. Do we need to install Grid infrastructure software for standalone server as well ?
2. Does Grid Infrastructure software comes separately or alongwith DB software ?
3.Is Grid software same for RAC and standalone server setup ?
4.Do we need to create user Grid for installation of Grid for standalone server as well ?
can anyone give me full steps from scratch ?
Regards,
Edited by: LazyDBA11g on Apr 10, 2011 12:44 AM
Edited by: LazyDBA11g on Apr 10, 2011 12:47 AMHello sb,
Please find below the output of desired commands:
[oracle@yyy ~]$ id
uid=54321(oracle) gid=54321(oinstall) groups=54321(oinstall),54322(dba)
[oracle@yyy ~]$ env | sort
_=/bin/env
G_BROKEN_FILENAMES=1
HISTSIZE=1000
HOME=/home/oracle
HOSTNAME=yyy.in
INPUTRC=/etc/inputrc
LANG=en_US.UTF-8
LD_LIBRARY_PATH=:/u01/app/oracle/product/11.2.0/db_1/lib
LESSOPEN=|/usr/bin/lesspipe.sh %s
LOGNAME=oracle
LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;0 1:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.b tm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31: *.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:* .bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;3 5:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
MAIL=/var/spool/mail/oracle
ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1
PATH=/u01/app/oracle/product/11.2.0/db_1/bin:/usr/kerberos/bin:/usr/local/bin:/b in:/usr/bin:/home/oracle/bin
PWD=/home/oracle
SHELL=/bin/bash
SHLVL=1
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
SSH_CLIENT=172.20.1.139 4320 22
SSH_CONNECTION=172.20.1.139 4320 172.20.1.11 22
SSH_TTY=/dev/pts/1
TERM=xterm
USER=oracle
Regards,
Maybe you are looking for
-
I want to change the "Record Result" property of a step on the fly. I thought I could use the function TS_SetValPropertyBoolean for this. As a lookup string I used "Runstate.Sequence.Main[i].RecordResult" but this caused a run-time error. I found tha
-
I did as this article described. The download was going smoothly until I got this error message "Click OK or enter alternate path to folder in installation package containing the file itunes.msi" Where can I get "itunes.msi" ??
-
The CFINPUT TYPE=DATEFIELD does not want to accept the date from the database
I got a weird problem which I guess can be just a way to explain to the server how to interpret the value. I am using ColdFusion 8 with SQL 2005 Express. In my table, the field is a DATETIME field and shows the date with time (eg. 2007-07-23 00:00:00
-
Specail stock indicator 'O'.
Dear All, Can we add specail stock indicator O to mvt. type 281.We have arequirement wherein we will provide stock to vendor (NO FI entry).He will use it as per his requirement on site & tehn return the remaining to us.For the qty which he uses, we w
-
Advice for scanning my entire life's images
I am beginning the huge task of scanning the thousands of photos that are my entire life's collection. Disc space is important, but I also want to make sure that I scan the images at a high enough resolution that I will not be upset at the standard I