OEPE installation for production server

Does Oracle Enterprise Pack for Eclipse (OEPE) is required for WebLogic server installation (SOA 11g) for production environment ?
Or this is needed only when you need to develop some some SOA stuff ..

I got the answer that this is needed for OSB 11g.

Similar Messages

Offline installer for Lion Server? Can it be done?

Hi guys,
/rant
Before I get to the topic of this post let me state, the claimed download size for Lion Server is WAAAAAY off the +14MB they say it is. I have reinstalled it few times now and this time around I monitored the download and it came in at the +200MB mark!!! Sure, maybe the initial installer is only 14MB but it pulls down another +200MB when setting it up. Why is this not mentioned on the App Store page? Surely we should be told about such a large additional download.
/end rant
Can anyone tell me if its possible to make an offline installer for Lion Server, in the same way that it can be done for the Lion client?
I have been tinkering with it a lot and have had to reinstall a few times and would prefer to not have to download 200MB everytime I screw something up, if it can be avoided.
Thanks in advance.

Hi defecta,
i have the same problem. I had to install a new server with lion at the cusomers site in a heavy military bunker below earth and no internet around. I was allowed to bring the server up to surface and give it internet with a myfi. As you can imagine it took some hours to download on a bad mobile connection out in the woods. I do know i have to install that server from scratch after it has been tested.
Have you or anyone else been able to capture the download? Is there a place to get an offline install package, a DVD or Stick. Sadly its to late now to image that server after fresh install.

R12 Installation in production server

Hi
I want to install R12 in production server. Client has bought Financial, Procurement, Inventory, Order Management & HCM (Human Capital Management). During Installation there is one option to select the product.
Anyone would suggest me, which checkboxes should I select to installation and implement above mentioned modules successfully. Or you have any reference metalink documentation please let me inform.
It will very helpful for me.
Best regards,
Makshud

Hi,
Please refer to [Oracle Applications Installation Guide: Using Rapid Install |http://download.oracle.com/docs/cd/B40089_09/current/acrobat/120oaig.pdf], Page 2-11. If you missed licensing any product during the installation you can do it later after the installation (via OAM).
Regards,
Hussein

EnterpriseOne Client Installation (for production)

Hi,
I would like to install EnterpriseOne Client on my desktop for production support (like changing menus, deploying packages). I have already ran setup from the shared folder of E812 (from deployment server) to install client on my desktop for development.
Can someone please guide me how can I install production client on my desktop, I am afraid not interfere the production installation of deployment server. I just need the client on my desktop so that I can connect to E1 production and change the menus (I need to add some tasks under existing menus in production).
Thanks
Muhammad

You have not yet clearly stated why you require a client, or what the client OS is
For Win 32, see Oracle Database 11g Release 2 for Microsoft Windows (32-bit)
For Win 64, see Oracle Database 11g Release 2 for Microsoft Windows (x64)
Also, Instant Client could be an option - Instant Client Downloads

Check Points for production server

Hi
We are planning to update patch level of production server and Our SRM server is looking into this server. In this regards, I would like to know what are the check points in Production server after Patching up?
I want to know the main areas which may get affected due to Patch-up.
Regards

Hi,
Pls keep go thru the new features that were introduced thru this patch level. Make note of the Bugs SAP has fixed with this service pack.
Keeping in view of the features and bug fixed keep track of the areas that you need to keep track of.
Its is also important to check for below things.
1. Master Data - Materials, Vendors and Users.
2. Transactional Data - SC's, PR's,PO's Confirmations, Invoices.
3. Workflow.
Regards,
Satya

Hardware specs for production server

Could anyone with operational experience provide some feedback on optimal
configurations for a production box running Weblogic App Server 5.1 ?
thanks,
raj

There is a capacity guide, please contact BEA sales to get a copy.
Cheers - Wei
Raj Rajagopalan <[email protected]> wrote in message
news:[email protected]..
Yes I looked at this link but don't see the type of information I'mlooking
for.
My best guess for an optimal hardware platform at this point is the
following:
Intel box with 256 mb RAM, 10 GB disk with a 800 MHz processor.
Would appreciate any feedback on whether I'm over or under the target fora
production box running WLS.
thanks,
raj
Wei Guan <[email protected]> wrote in message
news:[email protected]..
http://www.weblogic.com/docs51/admindocs/tuning.html
Cheers - Wei
Raj Rajagopalan <[email protected]> wrote in message
news:39bd4d99$[email protected]..
Could you give me a link ?
I see minimum reqts but what I'm looking for is an optimal
configuration
for
a production server. Clearly a maximal config with more of everythingwould
work but I'm hoping to have an intelligent idea of where the 90/10
rule
would apply.
thanks for your help,
raj
Michael Girdley <[email protected]> wrote in message
news:39b70b95$[email protected]..
I suggest checking out the tuning guide located in our
documentation.
>>>>
Thanks,
Michael
Michael Girdley
BEA Systems Inc
"rr" <[email protected]> wrote in message
news:39b6a57b$[email protected]..
btw this will be running whatever is the latest version of
Solaris.
>>>>>
thanks
rr <[email protected]> wrote in message
news:[email protected]..
Could anyone with operational experience provide some feedback
on
optimal
configurations for a production box running Weblogic App Server
5.1
thanks,
raj

Minimum Solaris installation for Directory Server

Hello,
i want to set up a new Solaris installation for Sun ONE directory server.
But i don't want to install always the "entire distribution" and then turn off all services. I want to keep the solaris os installation as small as possible. Has anybody tried this before and can report some experiences? Is the "reduced network" cluster the right way to go or better the "core" cluster? Does anybody have a list of the packages which must be installed after a minimal solaris installation for the ds to work?
Thanks a lot,
af_inet

Since you original question is "minimum requirement
at the SERVER", I would say that X is not really
needed at the server end if you use installer text
mode CLI (command is "./installer -nodisplay")
instead of installer graphical mode (GUI). However,
to fix uninstall/reinstall issue, X is needed as the
"prodreg" which is used to uninstall packages is a X
program, without text mode option.This is correct.
It is not a must to run ./startconsole (X program)
LOCALLY so as to perform DS admin functions as you
could always run SUN ONE Console REMOTELY from any
remote host (Windows or UNIX/Linux) with just the
console binaries installed. (for large data centre
env. the LDAP server is usually locked in server room
away from your desk and you tend to use remote admin
console).This is correct too. I think it's a matter of taste if i want to install console on the DS itself or on a separate host. As long as i have only one DS i will leave it on the machine itself. But you are right, this is not a must. So i should have asked my question more precicely :-)
Thank you very much,
Chris

Oracle 9i Client Installation for Windows Server 2003

Hello All,
How do I install the 9i client on Win Server 2003? I can't find any instructions...
Is it just download the 2 files and install in that order?
http://www.oracle.com/technology/software/products/oracle9i/htdocs/win2k3soft.html
Thanks!
Message was edited by:
user517416

Have you read the doc linked on the page which you gave ?
http://download-uk.oracle.com/docs/html/B10924_01/toc.htm
Moreover, you have the documentation installation guide for Windows :
http://download-west.oracle.com/docs/html/A95493_01/toc.htm
Nicolas.

Oracle Installation for Production Environment.

Hi All,
We need to install Oracle in our production environment.
But since there is no DBA in our project, we need to do it by ourself.
I was just wondering what all steps and cautions I need to take to install it.
I was told just double click on Setup.exe :-) and that would suffice.
I am pretty sure its not that easy, atleast for a production environment.
We might need to set some params, may be.
We are at present using Oracle 10g Rel 1.
Any help/suggestion would be highly appreciated.
Thanks in Advance,
Tanuja

Well, it does more complicate than a double click of setup.exe, especially for a production database.
It's not only about the installation, also think about how do you want to create your database, the storage configuration, database configuration, and backup/recover strategy etc.
For installation, make sure you follow Oracle installation guide,
http://download.oracle.com/docs/html/B10130_02/toc.htm
And there are many other document here
http://www.oracle.com/pls/db10g/portal.portal_demo3?selected=1

Minimum installation for client server.

What are the minimum Oracle8 installations on the client and
server to establish a connection using TCP/IP protocol?
Thanks in advance.
null

Hi Mac4lfe: If you want to SYNCH between the Mac and the ATV, then any G3 will do, just expect the synching to be slow. If you want to STREAM from the Mac to ATV, then a G3 will do for music but not for video. If you want to stream video, a G4 will do, but you will get a lot of beachballs when you do anything on iTunes and sometimes the streaming will fail. I suggest you get the cheapest Intel Mac, you will have a much better experience when streaming. Lastly, remember you will need a screen for the Mini, there will always be warnings, error messages, updates, etc in iTunes that you need a screen, mouse and keyboard for. Very lastly, you can just get the ATV and buy music, TV shows, Movies and rent movies without a Mac. 160GP shall be enough. I have 40 movies, 20 full TV seasons and 6000 songs and am just over 400GB.

Securing MySQL for production server.

Hello,
I am about to start to build a server running 10.5.3 to host a web site with a MySQL back end. Whilst doing this i will be learning about MySQL as i go along. The question i would like to ask though before i get started is What do i need to do initially to secure the MySL installation on a 10.5.3 Leopard Server?
Has Apple secured it as much as possible out of the box, apart form setting the root password or do i need to do further configuring to secure other areas.
PS. Is there such a tool that will check for any security vulnerabilities in your configuration before it goes live?
Thanks in advance for any help.

There are multiple attacks targeting Joomla presently active, based on what the botnets are aiming at the (non-Joomla) web sites I manage.
The web apps are the target here. Joomla, front and center. Yes, the attackers can want into the database, but they're going to try to gain that access through the very same applications that you have already authorized database access. Through your content management system (CMS). If Joomla can access and modify the database, then an attack based on SQL Injection or XSS can itself gain that same access.
Having the DB located local, remote or even on Mars (well, other than the latency) does not alter the security situation, as the target (Joomla) is authorized access into the database.
I don't prefer to connect Mac OS X Server (directly) to the web. For something like this, I use an out-board firewall, set to pass ports 80 and 443, and other specific ports as required, If you connect directly, you have to be much more careful with your management and installation. With Mac OS X Server behind a firewall, you can keep (most of) the port attacks blocked out at the firewall, and not directly on your server. If you install or reconfigure something that opens a port (whether you realize it or not) and you don't have an outboard firewall, that port can be accessed remotely.
I do use the Mac OS X Server firewall, in conjunction with the outboard firewall. I don't prefer to use the host firewall -- in isolation -- in an internet-facing server environment. And I keep that outboard firewall locked down.
One area of database security here involves getting recoverable copies off the host for use if the host becomes compromised. Periodically test the restores, too. And recognize you might have to drop back some number of snapshots, until you find a copy of your database and your web directories that isn't compromised.
Get on the Joomla security notification lists (the content management system I use offers those; haven't specifically checked Joomla), and do lock down your web server. Figure out who owns Joomla or other security updates, and figure out who owns archival processing and recovery, and figure out what you want to do if your server becomes compromised.
For the Apache configurations, you want to block access to all but specified directories, and you can want to block the .htaccess and other site-specific files. Access into your defaults, directory traversals, file specifications, etc., are typically blocked via conf directive or .htaccess. Joomla should have recommendations for this somewhere in its documentation. If not, other CMS pacakges have descriptions of locking down Apache, though various details of this process tend to be somewhat CMS-specific. (Check the [Drupal|http://drupal.org] site; I know that CMS has this sort of thing documented.)
You'll want to watch the attacks, too.
It usually takes me a half-hour or so to fully set up and test Apache, building from my templates and customizing those for the particular CMS install I'm working on. Way more than could be easily included here.

Which profile is used for PRODUCTION SERVER

Dear friends,
in Production client...
which profile is selected for client copy
LEE

Hi,
<a href="http://help.sap.com/saphelp_47x200/helpdata/en/69/c24c0f4ba111d189750000e8322d00/frameset.htm">Check here For more Information</a>
Regards
Umesh K

Grid Installation for standalone server

Past few days I’ve been installing oracle 11g r2 Grid infrastructure (standalone ) 32 bit on vmware workstation. The installation process finished successfully and root.sh is launched, the following error appears:
“Failure with signal 11 from command: /u01/app/11.2.0/grid/bin/crsctl pin css -n linux1-m
Creating local-only OCR (/u01/app/11.2.0/grid/bin/crsctl pin css -n linux1-m) ... failed"
I have no idea about this error...
help would be appreciated in this!!!!!!!!!!

“Failure with signal 11 from commandOperating System (OS) error - Therefore OS change will be required to correct it.
Oracle is victim; not culprit.
Installing Oracle & RAC can be a challenge for some folks who refuse to Read The Fine Manual.
Including VM into the environment complicates the challenges even more so.
Good Luck!

SSDT-BI for SQL Server 2014, Command line(silent unattendant automatic) installation script/steps

Hi,
I have downloaded SSDT-BI software and looking for commandline steps,config file for this.
http://www.microsoft.com/en-us/download/details.aspx?id=42313
Any one have Command line installations steps for SSDT-BI automatic(command line) installation for SQL Server 2014 with giving the files location,where to install.....etc, i mean config.xml.
I found below but not sure it will work or not. If any one have working correct command line script, please reply on this forum.
Looking for config.xml file, i searched online and did not find any where with clear config.xml file details.
--Found below from link and not sure it will work or not
http://blogs.technet.com/b/ilikesql_by_dandyman/archive/2013/03/10/how-to-automate-the-installation-of-sql-server-ssdt-office-2013-and-visual-studio-2012.aspx
setup.exe /ACTION=INSTALL /FEATURES=SSDTBI_VS2012 /Q /IACCEPTSQLSERVERLICENSETERMS /norestart
thanks in advance.

Hi SQLDBA321,
The SSDT-BI is automatically installed under xxx:\Program Files\Microsoft SQL Server\. Now matter in GUI or command line, we can't change the path. Because SSDT is a feature of SQL Server, not a feature of Visual Studio. It just use the Visual
Studio Shell. So SSDT will only be installed with SQL Server.
Reference:
Install SQL Server Data Tools - Business Intelligence for Visual Studio 2013
If you have any question, please feel free to ask.
Simon Hou
TechNet Community Support

Package files of Installation SBA for Lync Server 2013

Hi everyone,
It´s my first post and would like know where can found the files of installation for Lync Server 2013 SBA (Survivable Branch Appliance).
My appliance is a module SRE-910 with Router 2911
I contacted the microsoft and they said that the files are provided from cisco.
The Guide that I´m following is this:
http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=28555
Question posted in forum Microsoft:
http://social.technet.microsoft.com/Forums/en-US/lyncvoice/thread/81a0d1e2-39f2-45ad-9908-f4162e9d302f
Quote of Site Microsoft about software and Hardware requeriments to SBA:
"Required hardware and software is built into the Survivable Branch Appliance"
Someone can give a light ?
Thanks in advance!

http://blogs.technet.com/b/xdot509/archive/2012/10/24/installing-a-two-tier-pki-hierarchy-in-windows-server-2012-part-ii-installing-a-root-certification-authority-with-the-gui.aspx

OEPE installation for production server

Similar Messages

Maybe you are looking for