Grid size [VI Editor Options] property

Hello Quick question about VI programmatic Editing, specifically the [Editor Options] section.
I have not been able to find the property/method for the block diagram/ front panel 'editor grid size'. In the UI the setting is found on this page:
When working with old code, the first thing I do is up these values to the x86 limit (4095) so I only see the origin X,Y lines and not the fine scale grid*. This afternoon I am looking for a way to Mass Edit a .llb or folder of .VIs with VI editor properties/methods but [A] could not find them myself and [B] Could not find anything online about them.
NOTE: This post will be managed, I will post any solutions I find in this section, or after 1 week post what else I tried before giving up.
* Why don't I just disable the grid? The origin Lines are very useful for my current project, the grid is not.

Did nothing come up when you were forced to search the forum for this feature? Because not so long ago I posted the same question. Turns out I was your XKCD, just not from 2003.
http://forums.ni.com/t5/LabVIEW/Scripting-Style-Control-Grid-Size/td-p/3122727
It got no traction so I think someone needs to make an idea exchange idea. If you make it I'll vote for it...if I make it will you vote for it?
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Similar Messages

Scripting Style Control Grid Size

Is there scripting functions, to allow me to edit a VI's alignment grid size, and control style for creating controls/indicators? These setting are saved in each VI under the VI Properties, under the Editor Options. I looked around and couldn't find them. Thanks.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Cross linking with THIS and looking forward to the Idea Exchange post.

Grid size for Curves in PhotoShop CS

I want to get back to the default grid size for Curves in PhotoShop CS. I accidentally changed it to a much smaller grid (100 squares) from its default grid size which I think was 16 squares. I don 't know what I did to change it, but I'd sure like to unchange it.

Option-click on the grid.

Tools- FP Grid Default panel grid size (pixels) does nothing

Hi all,
LV 2013 SP1
I want to set up FP grid of 5 x 5 pixels.
When I go to LV Tools -> Options FP Grid Default panel grid size (pixels) and change to 5 pixels it does nothing.
The FP still uses 12 sq pixel grid even when I restart LV.
Does this happen to others? Am I doing something wrong?
Thanks.
Solved!
Go to Solution.

Hi battler,
what happens when you open a new VI after changing the grid settings?
Those changes do not apply to old VIs as is written in the LabVIEW help here!
Read the LabVIEW help also here…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How to find the size and resolution option in the aspect ratio drop down menu for the crop tool

while looking through certain tutorials on the new crop system i came across many that referenced the above mentioned size and resolution option in the access ratio drop down menu. They all mention a dialog box which then appears which looks really useful, however my version doesnt have this option. any help would be appreciated.

Trevor.Dennis wrote:
John, are there already differences? I thought 13.1 was mainly about retina display support, but I guess there would also be other fixes released while they were at it.
Yes, definitely already differences. I sympathize with Photoshop instructors (online and offline).
The headline change was Retina support but that was also made available to non-Cloud versions.
Other Cloud-only changes in 13.1 are listed here
http://helpx.adobe.com/photoshop/using/whats-new.html
http://psd.tutsplus.com/articles/news/cs6_1/
Non-Cloud CS6 users have been very vocal and disgruntled about some of these changes.

How i can set size of editor at runtime?

dear all,
How i can set size of editor at runtime?
The size of editor is good when I run form on windowX but so small on web . why? have any body call tell me how i can do?
thank for advance

Hi there,
You can use the builtin EDIT_TEXTITEM.
You can pass x-pos, y-pos, width and height as parameters to that.
Hope this helps

Editor option is not opening for table object

Hi Experts,
I have installed OWB 11.1 on my table machine. The strange thing what i found out that, the 'open editor 'option of Table is not opening for oracle module in the design centre.for other object (Like mapping ..etc) 'Open Editor' option is working fine.I have an project where there are frequent changes in the table structure , but as the open editor option is not working fine. i have to totally re-import mordified table . Do anyone having any idea how to slove this problem.
Regards
Ani

Hi,
Are you by any chance trying to run OWB on a 64 bit client? I have seen similar problems to what you are describing when trying to run OWB on 64 bit Windows. If this is the case you should try to use a 32 bit client machine
Regards
Roald

Design option missing for Fluid Grid layouts (was:In dreamweaver CC, I created a new fluid grid page, but the options to edit the page...)

Hi, in dreamweaver CC, I created a new fluid grid page, but the options to edit the page are limited to code / split / live. The design optin is missing and I need it to move around the fluid grid to position my elements that I have created.
Thanks

Hi Raymi,
Like Ben suggested, you can vote for the feature using the link provided. From what I understand, the product team is collecting feedback on the limitations of Live View for FG layouts and improving experience on that front. It would help if you could provide a list of limitations with the current workflow.
Thanks,
Preran

Finder Window Sizes and View Options

In an earlier message under Mac OS X Panther it was recommended that I post a new message in the AppleScript forum.
I'm looking for a way to automate the repetitive task of resizing Finder windows and resetting view options. For example resetting a hundred folders to the same window size and screen position with the same view options. This requires manually adjusting each window one by one.
A solution could be an AppleScript that would automate this task.
The following is the earlier message:
http://discussions.apple.com/message.jspa?messageID=1283081#1283081
I mistakenly deleted all the preference files for the Finder window options on my 17 inch PowerBook (.DS_Store Files).
This has returned all Finder windows to default settings for window sizes and view options.
I use custom widow sizes for all my folders that nicely fit the 17 inch screen on my PowerBook, leaving enough desktop space on the right for the hard drive icons and the Dock that I always keep vertical on the right.
I have a 12 inch PowerBook as well. And it has it's own custom window size that fits it's much smaller screen. It has always been a complaint of mine to have to manually reset windows whenever I needed to transfer folders with Bluetooth file exchange.
Resetting Finder window sizes and view option has always been a time consuming problem. Now to have to do it over again for hundreds of windows is a huge task that is way to manual.
The Finder is customizable. There must be a way to set the options for one window and be able to use those adjustments for other windows without having to re adjust each setting manually.
There was an application called Finder Window Manager. Maybe someone knows of another application that can do this of task or another way around this issue.
Photoscene
Powerbook G4 17 inch Mac OS X (10.4.3) Tiger/Panther

Photoscene,
I think if you repost this to the AppleScript link, someone there will have a solution for you (in the form of an applescript that you can run)...
http://discussions.apple.com/forum.jspa?forumID=724
Give it a shot (I'm not clever enough to give you a good script yet, but someone there will be!)
Bob

Change grid size together with the paths sticking to it

Hi! This is my first question in the Adobe forums!
I have made a simple score in my own music notation with the help of the grid in AI CS7. However, I set the wrong page size and now I have to everything over again. My question is: Can I fit thwe whole thing on an art board with a smaller size along with the grid? I want to keep everything but the size of the art board. So how do I change the grid ALONG with the objects and lines that are "stuck" to it? I hope my question is clear. Let me know if it isnt and I will clarify.

I think I fixed it. I will try later today to set the grid size the same as the width of the page and subdivide it this way. It would solve it if I could SET the artboard width to be anything: 1cm, 30cm, 100000 cm without changing the size of it.
-Joakim
Den 9. juni 2014 kl. 23:47 skrev Jacob Bugge <[email protected]>:
change grid size together with the paths sticking to it
created by Jacob Bugge in Illustrator - View the full discussion
Joakim,
As mentioned, the grid is a rather fluid thing, if it is the one I presume so you cannot rely on it for alignment and the like.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6445830#6445830
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Illustrator by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

How to export/ import Abap editor options?

Hi all!
I tried to copy my editor options (yellow button in the right corner of the editor's textedit) to another gui-Installation. I copied the \document and setting\user\SapWorkDir\ab4_data-Folder to the other terminal, but the setting are not used by the editor.
Where is my fault? Is there any any export/ import-function that i have missed?
Thx,
Adrian

Hi,
that's weird. I checked it on my laptop and I can see all keyboard settings in file keymap.xml. Whenever I change soome keyboard shortcut then this file is modified. So it should be working. Btw the folder ab4_data is also under Program files/SAP/FrontEnd/SAPGui. So maybe SAPGui is using the default profile from there.
Cheers

Hello, we are interested in more information on the Image Size Fit To option in phototshop. For example, if we open a 46x25 inch 120 dpi image and choose Fit to 4x6" does all of the resolution remain? Any links to tutorials in this area are appreciate

Hello, we are interested in more information on the Image Size > Fit To option in phototshop. For example, if we open a 46x25 inch 120 dpi image and choose Fit to 4x6" does all of the resolution remain? Any links to tutorials in this area are appreciated.

Let's look at the first thing: Aspect Ratio 46W x 25H does not fit 6W x 4H exactly. You get 6W x 3.621H If we preserve Landscape Orientation and Aspect Ratio. If I set H to 4, W will be 7.36 inches, clipping your picture.
You'll have to decide on how to clip off that 1.36 inches so your picture can be 4 x 6 in order to solve that problem.
Notice I set Resample off. Throwing out pixels is destructive editing. So what I am doing is "Scaling", changing the Print Size without touch the pixels. Notice how high the resolution goes up.
To Resample or not will be your decision. I hope I answered your questions properly. Let me know otherwise.
Gene

LrBinding.andAllKeys and LrBinding.orAllKeys - with optional property-table param (optObject): anybody ever got that to work?

LrBinding.andAllKeys and LrBinding.orAllKeys - with optional property-table param (optObject): anybody ever got that to work?
If so, please share your secret.
I may have it figured out by the time you post, but so far it has never worked for me - bug? or am I not doing something right?

I guess this is a bug
Lightroom SDK 5: LrBinding.andAllKeys and orAllKeys in conjunction with optional bind-to object param - doesn't work, or…

Creating ASM after installing grid infrastructure software only option

OS environment is Solaris 10 sparc (64 bit) with suncluster 3.2. Oracle version is 11.2.0.3.0... ASM configuration also..
Grid binaries (i.e. GRID_HOME) will be placed in local disk on both the nodes. Oracle Binaries (ORACLE_HOME) also will be placed in local disk on both the nodes..Oracle database only will be placed in shared storage with ASM...
My doubt is If i select "install grid infrastructure software only" option, can i create separate ASM instance on each node by using "$GRID_HOME/dbs/initSID.ora" file of each node?
Is it possible to create two ASM instance in the clustered environment since Single instance Oracle ASM is not supported with Oracle 11g release 2 as per "Oracle® Solaris Cluster Data Service for Oracle Guide"?
Please tell me the suggestion if anyone knows........
Thanks & Regards
Ramesh M

Hi,
First of all "software only installation" only places the binaries onto the local disks. This software only binaries later have to be configured either for GI Standalone Server or GI for Cluster environment. It differs in the root.sh script to be called, and in the need to use config.sh to configure the cluster environment.
So by configuring standalone server GI later, you will only have a local ASM installation.
However you will not end up with a initSID.ora file for the ASM instance, since the spfile of the ASM instance will always be placed inside the first ASM diskgroup to be configured. (the same for GI cluster, as for GI SI).
Now creating clustered ASM and SI ASM => you can only create clustered ASM for nodes which participate in the same cluster. So if you configured both nodes with clustered GI, but did not tell them to be 1 cluster, but 2, then both ASM instances will be separate. Resulting in beeing ASM1 instance on both nodes, and not able to mount the same diskgroup (consistent of the same disks) on both servers at the same time. So in the end having 2 clusteres consisting of one node each, does not really differ much from the ASM point of view, other than having ASM1 as instance name instead of +ASM (in GI SI). The difference is in the cluster stack below ASM, which simply has more processes and requirement for the clustered GI version.
And last but not least, yes you can have separate ASM instances on 2 separate nodes. If they are not part of the same cluster, the ASM instances are independent.
They are not really single instances, since they know that they are RAC ASMs, however they do not communicate with other nodes. However you may only have one ASM instance on each host (either physical or virtual host, as you can have an ASM instance in each solaris container).
Hope that clarifies it.
Regards
Sebastian

Should I change the DOCTYPE in the Page Editor Options?

The Document Type Declaration I now have for my two sites is XHTML 1.0 Transitional. On the Authoring tab should I change this to HTML 5? Can this affect the pages I created several years ago with EW?
Also on the Defaults Fonts tab I see I have US/Western European (ISO). Should I change this to (UTF-8)? If I do that, should I also change to UTF-8 in the Site Settings?
I ask these questions because I see these settings in a new book I'm reading about Responsive Web Design. I haven't changed my sites for years and am way behind in my knowledge about how to do it.
One more question - I just read in a book published in 2007 that if I use the default UTF-8 bad things may happen. The author said that EW adds Byte Order Marks to the top of each page. She said that this may cause problems with some web servers and all
PHP pages.

The doctype setting affects new pages created; it does not change old pages. There is no need for you to change your old pages unless you want to / have a reason to.
The language character set under Default Fonts tells you which character set you are setting the Default fonts for, which determines what fonts EW uses in Code View, and in Design View if you haven't specified a font. [This doesn't tell you
what fonts a user will see on your site if you don't specify fonts.] This setting does not determine which character set your pages are actually using. (If you look at UTF-8, you'll see it also has default fonts.)
Site Settings is where you would change the charset if UTF-8 is not what it is currently is set to. (You'll see the encoding in the "Content-Type" meta tag in the page.) This affects new pages you create, not existing
pages.
A book from 2007 does not relate to the current EW4. Using byte order marks on normal pages isn't an issue. Make sure you have php pages unchecked for byte order marks in Page Editor Options. That should be the default setting for EW4.

Grid size [VI Editor Options] property

Similar Messages

Maybe you are looking for