Group by result in query
how can i see the group by result in a query means show result also in groups i hope u guys understand wat i meann
Mushy wrote:
how can i see the group by result in a query means show result also in groups i hope u guys understand wat i meannJust select the GROUP BY columns. Not sure what you are exactly looking for. Lets say you have a table of employee and you want count of employee on each department you can do this
SELECT deptno, count(*) FROM emp GROUP BY deptnoHere i have selected deptno and grouped by deptno.
Is this what you are looking for?
Similar Messages
-
"group by" resulting in 'invalid number' error
Hi,
I have following query:
SELECT from_locn from appwms.PROD_TRKG_TRAN ptt
join
(select locn_id,locn_brcd from appwms.locn_hdr where locn_brcd like '60-001-%') locn on locn.locn_id=ptt.from_locn
where ptt.TRAN_TYPE = 500
This runs fine and displays results as below:
FROM_LOCN
0000317
0000319
0000319
0000319
0000319
Now, adding a group clause results in error:
SELECT from_locn from appwms.PROD_TRKG_TRAN ptt
join
(select locn_id,locn_brcd from appwms.locn_hdr where locn_brcd like '60-001-%') locn on locn.locn_id=ptt.from_locn
where ptt.TRAN_TYPE = 500
group by from_locn
ORA-01722: invalid number
01722. 00000 - "invalid number"
*Cause:
*Action:
Kindly let me know what I am missing hereHi,
I don't see any obvious mistakes.
Whenever you have a problem, post enough so that the people who want to help you can re-create the problem and test their ideas. Include a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.Make sure the error occurs with the sample data you post.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002 -
Group by clause using query builder
Hi,
I have some event pages (pages created using a template called event) which are tagged with event types and I have 5 event types in total. In the event listing page, i want to show the events grouped by event types.
Is there a facility in query builder to use "group by" which returns be results in different buckets?
Is thats not the case, i have to run 1 query per event type which means i have to run 5 queries. (or i get the event type as facets -> get the buckets -> get the predicate for each bucket -> run one query per bucket which again is nothing buket one query per event type). I dont want to do that.
Hence using the query builder or any other form of querying, is there a way to group the results?
Regards,
yadhuPerfect... thats answers the query...
Basically the summary is I cannot use aggregate functions like group by. Once i get the search results, i can either use facets, get the bucket predicates and drill down the search OR get all the results, do look up on property (using Node.getProperty) of each node in the result and build my UI based on mere coding. Am I right? -
Oracle.apps.xdo.XDOException: Group G_EMP has incorrect Query Source : Q1
All,
I am trying to create some reports using XML data Template in BI publisher. But when I just create a simple data template, I keep getting the error message as mentioned below.
[111907_101025922][][STATEMENT] Template parsing completed...
[111907_101026625][][STATEMENT] Start process Data
[111907_101026625][][STATEMENT] Process Data ...
[111907_101026625][][STATEMENT] Writing Data ...
[111907_101026625][][EVENT] Data Generation Completed...
[111907_101026625][][EVENT] Total Data Generation Time 1.0 seconds
[111907_102628031][][STATEMENT] Setting data definition:Sample_Data_Template type:oracle.apps.xdo.servlet.data.bind.AdvancedQueryBoundValue11
[111907_102629516][][STATEMENT] Logger.init(): *** DEBUG MODE IS ON. ***
[111907_102629516][][STATEMENT] Logger.init(): LogDir=C:\Program Files\Java\jdk1.5.0_13\xmldebug
[111907_102629516][][STATEMENT] Template parsing started...
[111907_102629516][][STATEMENT] Data Template ......
[111907_102629516][][STATEMENT] oracle.xml.parser.v2.XMLDocument@1ab4586
[111907_102629516][][STATEMENT] Inside dataQueryParser...
[111907_102629516][][STATEMENT] Inside dataStructureParser...
[111907_102629516][][STATEMENT] Group ...report
[111907_102629516][][EXCEPTION] oracle.apps.xdo.XDOException: Group G_EMP has incorrect Query Source : Q1
at oracle.apps.xdo.dataengine.DataTemplateParser.groupParser(Unknown Source)
at oracle.apps.xdo.dataengine.DataTemplateParser.groupParser(Unknown Source)
at oracle.apps.xdo.dataengine.DataTemplateParser.dataStructureParser(Unknown Source)
at oracle.apps.xdo.dataengine.DataTemplateParser.templateParser(Unknown Source)
at oracle.apps.xdo.dataengine.XMLPGEN.setDataTemplate(Unknown Source)
at oracle.apps.xdo.dataengine.DataProcessor.setDataTemplate(Unknown Source)
at oracle.apps.xdo.servlet.data.bind.AdvancedQueryBoundValue11.callDataProcessor(AdvancedQueryBoundValue11.java:117)
at oracle.apps.xdo.servlet.data.bind.AdvancedQueryBoundValue11.getValue(AdvancedQueryBoundValue11.java:101)
at oracle.apps.xdo.servlet.ReportContextImplV11.getReportXMLData(ReportContextImplV11.java:389)
at oracle.apps.xdo.servlet.CoreProcessor.process(CoreProcessor.java:132)
at oracle.apps.xdo.servlet.CoreProcessor.generateDocument(CoreProcessor.java:62)
at oracle.apps.xdo.servlet.ReportImpl.renderBodyHTTP(ReportImpl.java:638)
at oracle.apps.xdo.servlet.ReportImpl.renderReportBodyHTTP(ReportImpl.java:237)
at oracle.apps.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:279)
at oracle.apps.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:266)
at oracle.apps.xdo.servlet.XDOServlet.doGet(XDOServlet.java:199)
at oracle.apps.xdo.servlet.XDOServlet.doPost(XDOServlet.java:222)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.apps.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:65)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Could any one of you please help me out :)
Thanks,Hi King,
Find below the data template I am using. I have defined a Q1 in my data template. Let me know where I am going wrong.
Thanks,
Ram
<dataTemplate name="Emp" dataSourceRef="EBS">
<dataQuery>
<sqlstatment name="Q1" dataSourceRef="EBS">
<![CDATA[ SELECT empno, empname FROM APPS.EMP ]]>
</sqlstatment>
</dataQuery>
<dataStructure>
<group name="G_EMP" source="Q1">
<element name="empno" value="empno"/>
<element name="empname" value="empname"/>
</group>
</dataStructure>
</dataTemplate> -
Inconsistent SDO_RELATE results when querying 2.5D data
Oracle 11.1.0.7 with Patch 8343061 on Windows Server 2003 32bit.
I'm getting inconsistent results from SDO_RELATE results when querying 2.5D data. Some geometries I expect to be OVERLAPBDYDISJOINT, are not always being returned by SDO_RELATE when using the OVERLAPBDYDISJOINT mask. It seems that the order of the tables makes a difference to the result.
Here's a table with one 2.5D geometry and a 2D index:
CREATE TABLE TEST1 (
ID NUMBER PRIMARY KEY,
GEOMETRY SDO_GEOMETRY);
INSERT INTO TEST1 (id, geometry) VALUES (
1,
SDO_GEOMETRY(3002, 2157, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1), SDO_ORDINATE_ARRAY(561695.935, 834005.726, 25.865,
561696.229, 834005.955, 25.867, 561686.278, 834015.727, 26.088, 561685.179, 834019.771, 26.226, 561680.716, 834022.389, 26.226,
561674.434, 834025.125, 26.171, 561671.963, 834032.137, 25.667, 561670.832, 834037.185, 25.619, 561667.946, 834042.976, 25.84,
561666.717, 834047.218, 26.171, 561664.229, 834051.781, 26.778, 561660.041, 834055.935, 26.64, 561657.514, 834061.742, 26.53,
561658.59, 834067.116, 27.882, 561657.67, 834070.739, 28.821, 561653.028, 834073.777, 29.042, 561653.234, 834078.769, 28.379,
561658.336, 834080.105, 29.511, 561664.582, 834079.468, 31.94, 561669.257, 834075.821, 33.707, 561672.716, 834074.456, 33.707,
561676.875, 834077.262, 33.735, 561675.868, 834081.55, 33.707, 561673.131, 834087.641, 33.679, 561672.208, 834093.502, 33.238,
561668.578, 834100.894, 33.735, 561666.013, 834106.399, 33.679, 561661.408, 834111.23, 33.514, 561654.854, 834117.181, 33.486,
561651.695, 834122.292, 33.569, 561649.112, 834128.847, 33.431, 561645.982, 834134.786, 33.293, 561642.485, 834141.235, 33.072,
561642.138, 834150.085, 33.293, 561646.072, 834159.721, 36.578, 561647.274, 834165.532, 37.02, 561646.359, 834170.867, 37.02,
561645.42, 834175.485, 36.799, 561642.44, 834180.977, 36.826, 561638.677, 834185.419, 36.771, 561636.693, 834194.824, 37.158,
561635.462, 834202.105, 37.241, 561631.998, 834208.745, 37.268, 561628.871, 834213.994, 37.241, 561627.554, 834220.393, 37.82,
561625.79, 834226.697, 39.532, 561620.561, 834236.494, 39.891, 561619.265, 834249.687, 39.697, 561619.883, 834260.02, 41.326,
561620.977, 834264.399, 43.093, 561622.557, 834270.723, 43.452, 561622.172, 834276.978, 43.452, 561621.347, 834285.541, 43.479,
561622.214, 834292.055, 43.645, 561619.718, 834302.583, 43.755, 561616.762, 834316.47, 43.755, 561608.842, 834328.241, 43.7,
561606.346, 834334.93, 43.7, 561605.27, 834341.929, 43.7, 561603.925, 834350.648, 43.728, 561602.462, 834358.405, 43.838,
561599.552, 834366.629, 44.031, 561594.551, 834374.291, 43.396, 561590.644, 834383.986, 43.065, 561588.48, 834392.21, 44.942,
561586.923, 834397.32, 46.737, 561584.608, 834402.898, 49.299, 561581.389, 834410.194, 50.077, 561580.437, 834419.49, 51.907,
561580.438, 834427.63, 53.127, 561582.245, 834433.389, 55.791, 561586.664, 834433.397, 57.503, 561593.88, 834433.608, 57.475,
561596.305,834439.653, 57.42, 561591.804, 834445.862, 57.309, 561589.097, 834447.689, 57.014)));
SELECT sdo_geom.validate_geometry_with_context(geometry, 0.0005) FROM TEST1;
DELETE FROM user_sdo_geom_metadata WHERE table_name = 'TEST1' AND column_name = 'GEOMETRY';
INSERT INTO user_sdo_geom_metadata VALUES ('TEST1','GEOMETRY',
MDSYS.SDO_DIM_ARRAY(
MDSYS.SDO_DIM_ELEMENT('X',400000,750000,0.0005),
MDSYS.SDO_DIM_ELEMENT('Y',500000,1000000,0.0005),
MDSYS.SDO_DIM_ELEMENT('Z',-10000,10000,0.0005)
), 2157);
DROP INDEX TEST1_SPIND;
CREATE INDEX TEST1_SPIND ON TEST1(GEOMETRY) INDEXTYPE IS MDSYS.SPATIAL_INDEX PARAMETERS ('layer_gtype=line sdo_indx_dims=2');And here's another table with a 2D geometry and a 2D index:
CREATE TABLE TEST2 (
ID NUMBER PRIMARY KEY,
GEOMETRY SDO_GEOMETRY);
INSERT INTO TEST2 (id, geometry) VALUES (
1,
SDO_GEOMETRY(2002, 2157, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1), SDO_ORDINATE_ARRAY(561816.516, 834055.581, 561819.504, 834057.173,
561817.942, 834060.818, 561810.044, 834078.997, 561805.576, 834087.634, 561801.572, 834094.299, 561798.558, 834100.467,
561796.254, 834107.637, 561793.754, 834115.605, 561794.049, 834123.694, 561793.698, 834130.518, 561792.905, 834138.883,
561787.867, 834145.772, 561782.544, 834150.548, 561777.707, 834156.53, 561773.945, 834161.32, 561771.061, 834166.957,
561768.155, 834173.131, 561764.735, 834178.744, 561759.603, 834187.782, 561756.146, 834195.493, 561753.416, 834198.821,
561754.141, 834205.691, 561756.768, 834209.681, 561757.217, 834216.701, 561753.086, 834232.46, 561744.371, 834254.589,
561740.936, 834263.001, 561737.198, 834272.208, 561732.231, 834284.915, 561730.52, 834297.01, 561728.339, 834310.053,
561727.825, 834328.069, 561730.461, 834342.992, 561729.808, 834367.948, 561730.216, 834396.988, 561732.273, 834419.047,
561732.783, 834424.668, 561731.647, 834432.212, 561731.872, 834439.436, 561731.39, 834449.269, 561732.041, 834462.813,
561733.583, 834471.926, 561733.229, 834485.049, 561730.868, 834498.462, 561726.379, 834512.59, 561725.776, 834528.932,
561727.488, 834555.23, 561729.357, 834577.873, 561731.05, 834595.931, 561731.163, 834611.928, 561734.057, 834637.031,
561732.67, 834636.4, 561725.401, 834633.796, 561721.039, 834632.493, 561718.777, 834632.167, 561710.437, 834632.888,
561647.929, 834636.658, 561644.963, 834630.085, 561632.796, 834629.813, 561625.553, 834627.647, 561620.473, 834626.711,
561608.718, 834624.94, 561599.935, 834619.684, 561596.67, 834613.843, 561594.27, 834607.774, 561592.513, 834601.752,
561591.349, 834593.899, 561597.265, 834584.888, 561595.956, 834571.479, 561595.075, 834556.196, 561593.997, 834539.68,
561594.316, 834528.071, 561595.261, 834516.44, 561595.538, 834504.804, 561597.227, 834497.417, 561599.3, 834490.416,
561601.265, 834482.61, 561605.126, 834475.502, 561599.232, 834473.683, 561593.076, 834471.379, 561599.154, 834451.112,
561589.097, 834447.689, 561591.804, 834445.862, 561596.305, 834439.653, 561593.88, 834433.608, 561582.245, 834433.389,
561580.438, 834427.63, 561580.437, 834419.49, 561581.389, 834410.194, 561584.608, 834402.898, 561586.923, 834397.32,
561588.48, 834392.21, 561590.644, 834383.986, 561594.551, 834374.291, 561599.552, 834366.629, 561602.462, 834358.405,
561603.925, 834350.648, 561605.27, 834341.929, 561606.346, 834334.93, 561608.842, 834328.241, 561616.762, 834316.47,
561619.718, 834302.583, 561622.214, 834292.055, 561621.347, 834285.541, 561622.172, 834276.978, 561622.557, 834270.723,
561620.977, 834264.399, 561619.883, 834260.02, 561619.265, 834249.687, 561620.561, 834236.494, 561625.79, 834226.697,
561627.554, 834220.393, 561628.871, 834213.994, 561631.998, 834208.745, 561635.462, 834202.105, 561636.693, 834194.824,
561638.677, 834185.419, 561642.44, 834180.977, 561645.42, 834175.485, 561646.359, 834170.867, 561647.274, 834165.532,
561646.072, 834159.721, 561642.138, 834150.085, 561642.485, 834141.235, 561645.982, 834134.786, 561649.112, 834128.847,
561651.695, 834122.292, 561654.854, 834117.181, 561661.408, 834111.23, 561666.013, 834106.399, 561668.578, 834100.894,
561672.208, 834093.502,561673.131, 834087.641, 561675.868, 834081.55, 561676.875, 834077.262, 561672.716, 834074.456,
561669.257, 834075.821, 561664.582, 834079.468, 561658.336, 834080.105, 561653.234, 834078.769, 561653.028, 834073.777,
561657.67, 834070.739, 561658.59, 834067.116, 561657.514, 834061.742, 561660.041, 834055.935, 561664.229, 834051.781,
561666.717, 834047.218, 561667.946, 834042.976, 561670.832, 834037.185, 561671.963, 834032.137, 561674.434, 834025.125,
561680.716, 834022.389, 561685.179, 834019.771, 561686.278, 834015.727, 561696.229, 834005.955, 561695.935, 834005.726,
561677.805, 833994.91, 561683.163, 833985.817, 561703.01, 833949.434, 561725.891, 833961.856, 561744.35, 833971.197,
561768.396, 833983.86, 561777.842, 833988.883, 561798.333, 833999.743, 561797.243, 834005.725, 561783.574, 834040.515,
561798.127, 834046.391, 561807.001, 834050.509, 561816.516, 834055.581)));
SELECT sdo_geom.validate_geometry_with_context(geometry, 0.0005) FROM TEST2;
DELETE FROM user_sdo_geom_metadata WHERE table_name = 'TEST2' AND column_name = 'GEOMETRY';
INSERT INTO user_sdo_geom_metadata VALUES ('TEST2','GEOMETRY',
MDSYS.SDO_DIM_ARRAY(
MDSYS.SDO_DIM_ELEMENT('X',400000,750000,0.0005),
MDSYS.SDO_DIM_ELEMENT('Y',500000,1000000,0.0005)
), 2157);
DROP INDEX TEST2_SPIND;
CREATE INDEX TEST2_SPIND ON TEST2(GEOMETRY) INDEXTYPE IS MDSYS.SPATIAL_INDEX PARAMETERS ('layer_gtype=line sdo_indx_dims=2');Now if I check how these two geometries relate to each other, the answer is OVERLAPBDYDISJOINT, which makes sense when inspecting the geometries.
SQL> SELECT
2 sdo_geom.relate(t1.geometry, 'determine', t2.geometry, 0.0005) relate_1_to_2,
3 sdo_geom.relate(t2.geometry, 'determine', t1.geometry, 0.0005) relate_2_to_1
4 FROM test2 t2, test1 t1
5 WHERE t1.id = t2.id;
RELATE_1_TO_2 RELATE_2_TO_1
OVERLAPBDYDISJOINT OVERLAPBDYDISJOINT
1 row selected.So, I'd expect this query to return something...
SELECT /*+ ORDERED */ t1.id, t2.id, sdo_geom.relate(t1.geometry, 'determine', t2.geometry, 0.0005) relate
FROM test2 t2, test1 t1
WHERE sdo_relate(t1.geometry, t2.geometry, 'mask=overlapbdydisjoint') = 'TRUE'
AND t1.id = 1
AND t2.id = 1;Nada. And this...
SELECT /*+ ORDERED */ t1.id, t2.id, sdo_geom.relate(t1.geometry, 'determine', t2.geometry, 0.0005) relate
FROM test1 t1, test2 t2
WHERE sdo_relate(t2.geometry, t1.geometry, 'mask=overlapbdydisjoint') = 'TRUE'
AND t1.id = 1
AND t2.id = 1;Nada.
And this...
SQL> SELECT /*+ ORDERED */ t1.id, t2.id, sdo_geom.relate(t1.geometry, 'determine', t2.geometry, 0.0005) relate
2 FROM test2 t2, test1 t1
3 WHERE sdo_relate(t2.geometry, t1.geometry, 'mask=overlapbdydisjoint') = 'TRUE'
4 AND t1.id = 1
5 AND t2.id = 1;
ID ID RELATE
1 1 OVERLAPBDYDISJOINT
1 row selected.This version gives the right answer.
Can anyone explain this?Hi,-
I think you are running into these bugs 7158518 and 7710726.
Could you please request the patch for the bugs so that they are published on Metalink
if they dont exist there?
Please let us know if these fix your problem.
Best regards
baris -
Re:User group,info set and Query combination table
Hi,
I would like to know the combination table of User group,info set and Query.
Can any body please respond to my question?
Regards,
Suresh Kumar.Hi,
Check the tables starting with AQG*.
Reward points if useful.
Regards,
Atish -
How to digit grouping in result grid?
Hello Community & SQL Dev team,
Asking on behalf of my workmate :)
===================
Does anyone know to enable digit grouping in result grid?
Display: 999,999,999
Instead off: 999999999
===================
YuryThanks Barry, the feature request has been submitted:
https://apex.oracle.com/pls/apex/f?p=43135:7:10812276646823::NO:RP,7:P7_ID:36181
Forum members: visit the link and vote for the feature if you would find it useful.
Cheers!
Marc -
Query Performance and Result Set Query/Sub-Query
Hi,
I have an infoset with as many as <b>15 joins</b> with different ODS and Master Data..<b>The ODS are quite huge with 20 million, 160 million records)...</b>Its taking a lot of time even for a few days and need to get atleast 3 months data in a reasonable amount of time....
Could anyone please tell me whether <b>Sub-Query or Result Set Query have to be written against the same InfoProvider</b> (Cube, Infoset, etc)...or they can be used in queries
on different infoprovider...
Please suggest...Thanks in Advance.
Regards
AnilHi Bhanu,
Needed some help defining the Precalculated Value Set as I wasnt succesful....
Please suggest answers if possible for the questions below
1) Can I use Filter Criteria for restricting the value set for the characteristic when I Define a Query on an ODS. When i tried this it gave me errors as below ..
"System error in program CL_RSR_REQUEST and form EXECUTE_VTABLE:COB_PRO_GET_ALWAYS.... Error when filling value set DELIVERY..
Job cancelled after system exception ERROR_MESSAGE"
2) Can I create a create a Value Set predefined on an Infoset - Not Succesful as Infoset have names such as "InfosetName_F000232" and cannot find the characteristic in Paramter Tab for Value Set in Reprting Agent.
3) How does the precalculated value Set variable help if I am not using any Filtering Criteria and is storing the List of all values for the Variable from the ODS which consists of 20 millio records.
Thanks for your help.
Kind Regards
Anil -
Query SQ02 : restriction lines result of query
Hi everybody,
I have prb with a query. I have created a query and infoset. I have join tables .. and I would like to add condition of clause 'where' to restrict the result of query depending on the dates. Those dates are not given in the selection screen but depends on the results of a one table included in infoset.
somebody has idea ?
Thanks.
MayaHi,
In the infoset you can write code to restrict the lines..
GO to the infoset in change mode..
click the extras button..
click the code tab..
choose the code section.."Records processing"
In that you will have the table structures available...use the check statement to filter the data..
Ex..
CHECK VBAK-ERDAT = SY-DATUM.
Thanks
Naren -
Group Policy Results wizard on Windows 8.1
I am using the Group Policy Management console on Windows 8.1. When I run the Group Policy Results wizard and target a computer running Windows Server 2003, I get the following error in the Details and Summary tabs: "An error occurred while generating
report: There are no more endpoints available from the endpoint mapper".
This only happens if I target a Server 2003 computer. If I target Windows XP (and up) or Server 2008 (and up), it works fine.
I tried running the wizard from a Server 2012 and a Server 2012 R2 computer and I receive the same error. If I run the wizard from other versions of Windows/GPMC, I can target those Server 2003 computers just fine.
Also, the GPRESULT tool works from Windows 8.1 when I target a Server 2003 computer.
Is Server 2003 no longer supported by the GP Results wizard or is something else messed up? Web searches for that error just come up with things relating to Active Directory replication, Windows firewall, or the RPC locator service.> "An error occurred while generating report: There are no more endpoints
> available from the endpoint mapper".
Are server and client in the same network? If not: Double check ALL
intermediate firewalls... I remember such a problem with a TMG between
server and client, but I don't know the exact resolution - another
member of the team reconfigured the TMG.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :)) -
Exporting result of query to another input query (Write Cube )?
Hello BI experts,
Is it possible to send a result of a read cube / query to be saved into other write cube / query ?
If yes , how to do ?
thx in advanceHello srini,
I am tring to update ODS from a query as per your suggestion.
But there is a Error
==========
Error in the definition of the analysis process: See long text
Node: Query 1
The technical field name KYF_0002 for field 4CKMVZCDCO7A6PK7FT0GB7WCV may only appear once per input or output structure
My quries is based on multiprovider and also has cell definition in it. Therefore i m not able to update result of query ods.
what should be done?
Thanks for your earlier siggestion. -
Saving result from query into CSV file
Hi folks,
in our application we're generating pages source using general packages (like htp, owa_util, ...). and in this part I'm a really beginner.
I want to modify source one of our page, I want to add functionality to enable save result from query (cursor) into CSV file, to enable user choose place where generated file will be created and also change file name.
I searched this forum and I found procedure, that could be useful:
procedure p_getcsv is
cursor cur is
select 'a1' col1, 'b1' col2, 'c1' col3 from dual
union select 'a2' col1, 'b2' col2, 'c2' col3 from dual
union select 'a3' col1, 'b3' col2, 'c3' col3 from dual;
begin
-- Set the MIME type
owa_util.mime_header( 'application/octet', FALSE );
-- Set the name of the file
htp.p('Content-Disposition: attachment; filename="test.csv"');
-- Close the HTTP Header
owa_util.http_header_close;
-- Loop through all rows in EMP
for x in cur
loop
-- Print out a portion of a row,
-- separated by commas and ended by a CR
htp.prn(x.col1||','|| x.col2||','||x.col3|| chr(13));
end loop;
end;What peace of code should I add to procedure that is generating web page to enable calling this procedure and whole saving process?
Can anybody help me with this?
Many thanks,
Tomas
Message was edited by:
TomeoHi Marc,
thanks for reply, problem is that I'm not using APEX application, I'm just generating web page code straight using oracle general packages.
But I found this solution (maybe some tunning will be good):
In page where I want to display Download i have
begin
htp.anchor2 (
curl => ... .p_getcsv'||'?term=2005&crn=123,
ctext => 'Download Class List'
HTP.br;
end;
...si I'm calling p_getcsv procedure:
procedure p_getcsv( term IN stvterm.stvterm_code%TYPE DEFAULT NULL,
crn IN sirasgn.sirasgn_crn%TYPE DEFAULT NULL) is
v_length NUMBER;
v_file_name VARCHAR2 (2000);
temp_blob blob;
line RAW(32767);
begin
DBMS_LOB.CREATETEMPORARY(temp_blob, TRUE);
FOR i IN 1..6 LOOP
line := UTL_RAW.CAST_TO_RAW(i||','||term||','||crn||',AAA,BBB,CCC'||chr(10));
DBMS_LOB.WRITEAPPEND(temp_blob, LENGTH(UTL_RAW.CAST_TO_VARCHAR2(line)), line);
END LOOP;
v_file_name := 'ClassList.csv';
v_length := DBMS_LOB.getlength (temp_blob);
-- set up HTTP header
-- use an NVL around the mime type and
-- if it is a null set it to application/octect
-- application/octect may launch a download window from windows
OWA_UTIL.mime_header (NVL ('csv', 'application/octet'), FALSE);
-- set the size so the browser knows how much to download
HTP.p ('Content-length: ' || v_length);
-- the filename will be used by the browser if the users does a save as
HTP.p ( 'Content-Disposition: attachment; filename="'
|| REPLACE (REPLACE (SUBSTR (v_file_name,
INSTR (v_file_name, '/') + 1
CHR (10),
NULL
CHR (13),
NULL
|| '"'
-- close the headers
OWA_UTIL.http_header_close;
-- download the BLOB
WPG_DOCLOAD.download_file (temp_blob);
-- release temporary blob
dbms_lob.freetemporary(temp_blob);
end;Regards,
Tomas -
WEBI Sample Result Set Query Property Question
Wnen I set the WEBI Sample Result Set query property my retrievals took longer than I thought they should especially with a limited result set. When I hit the View SQL button and look at SQL I notice that the following order by is added to the query:
Order by dbms_random.value
I copied the query and ran it against our Oracle database with and without the order by. Without the order by the query ran significantly faster. Is there any way to stop the order by from being generated when the Sample Result Set property is set?
Thanks,
BobThanks for your reply.
I tried to locate the parameter you mentioned in the parameters for my universe and did not find anything referencing not enforcing order bys. I checked the documentation and did not see anything there either. Please respond with the exact name of the parameter or if it is a custom parameter the settings you used to create it.
Thanks,
Bob -
Groups associated with each query
Hello Everyone,
We have multiple queries in our data model.
The Report Wizard requires to choose data for the layout by group name.
We are wondering how to check the names of the groups associated with each
query prior to entering the Report Wizard.
Thanks in advance,
S!G
Edited by: Sea!Gull on Feb 10, 2011 9:40 AMHappy St. Partick's Day, Abdetu, and all!
We used Wizard. So, we are wondering step by steps procedures.
Thank again, Abdetu
We wish to solve the issue on St. Partick's Day.
Happy St. Partick's Day!
Edited by: Sea!Gull on Mar 17, 2011 8:16 AM -
Hello
When i want to get Group policy Results for one Computer in Domain came out this error: (Environment win2k8 and win7)Hi Amir,
>>When i want to get Group policy Results for one Computer in Domain came out this error
Before going further, we can try to run command gpresult/h gpreport.html
with admin privileges on the computer to see if we can successfully collect group policy result.
Best regards,
Frank Shen
Maybe you are looking for
-
This is my mother's computer. It's an HP Pro something. It has Win 7 Pro and Firefox is up to date. I'm not sure when this started because she doesn't use it every day. We can't get to Google at all using Firefox. I even tried a new tab just now and
-
Account Help. Can't use Apple ID
Hello. I am in a complete shambles over my Apple ID account as such I can no longer login to the community using it and had to create this account just to ask for help. Ok so my main issue is I login using my normal ID that I use on everything and th
-
Regular expression not working for adobe forms
Hi, Iam using qtp for adobe forms and for some reason if i put in regular expression for apid value it doesn't recognise the object..there is nothing wrong with the regular expression as it is evaluated using regular expression evaluator in qtp 11.0.
-
I have created an ADT class Bus with all the methods necessary. A method in this class will be called in a method in another class 'Terminus'. This method(in 'Terminus') will filter records place of travel wise on any day listing the buses. But I see
-
ITune does not open after installing IE7
I have recently installed Internet Explorer 7 on my Window XP (with service pack 2). This causes me problem in opening iTune right now. After removing IE7, then restart the computer and reinstall iTune, I still cannot open iTune. Does anyone aware of