Group Header is not repeating when exported to pdf in 2008 r2

Hi
i have a typical scenario here , when i am trying to repeat my group header it is working fine in report viewer but when i exported to pdf it is not repeating. yea it is working fine in excel.
could some one help me in this as i tried various ways but couldn't able to figure it out
PS: i am using 2008r2
if this is the issue in 2008r2 , did it got fixed in any new version please suggest.
thanks
sharath

Hi sharath,
Based on my understanding, the group header doesn’t repeat when you export report to PDF file.
In Reporting Service, the RepeatOnNewPage property has effect on static row members only and where KeepWithGroup is not None. If value for KeepWithGroup is None, the group header will not appear in a new page. As we tested in our environment, we set FixedData
as True, KeepWithGroup as After and RepeatOnNewPage as True, the group header repeat in second page when export to PDF file. Please refer to screenshot below:
So in your scenario, please check if you have set KeepWithGroup as After. Then export to PDF again to check if group header can repeat in multiple pages. If issue persists, please provide some detail information about your report design. If possible, please
provide some screenshots about your results before and after perform PDF render.
Reference:
Display Headers and Footers with a Group (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu

Similar Messages

Header Record not repeated when detail records span to more than a page

In RTF template,
1. I have a for-each with code of
<?for-each@section:G_HEADER?>
2. Under 'for-each', I have the header record is defined in a 1 table row.
The row property for this table is set to 'Repeat as header row at the top of each page'
3. Under this I have another table with fields for LINES data with its own 'for-each' code <?for-each:G_LINES?>
4. Followed by end for the above two 'for-each'
However, when I generate the PDF output from Preview, when the lines data spans to more than one page, the header record is not repeating on the subsequent pages. Anyone has any ideas how to fix this
My XML Publisher version is 10.1.3.4.1 Build 130. I have a sample data and the template, but not sure if I can upload here.

user6098416 ,
I am also facing the same Problem as yours.
My Template layout is as follows:
<?for-each:G_HEADER?>
Header table
<?for-each:G_DTL1?>
detail table --> (<?for-each:G_DTL2?> Detail Fields <?end for-each?> )
<?end for-each?>   --> End for each for G_DTL1
<?end for-each?>   --> End for each for G_HEADERMy problem is Header Table is not repeating on each page when detail Table data goes beyound one page.
I tried the following but its not working:
<?template:header?>
Header table
<?end template?>
<?for-each:G_HEADER?>
<?call@inlines:header?>
<?for-each:G_DTL1?>
detail table --> (<?for-each:G_DTL2?> Detail Fields <?end for-each?> )
<?end for-each?>   --> End for each for G_DTL1
<?end for-each?>   --> End for each for G_HEADERI am not sure whats wrong here.
Thanks
Sandeep

Hyperlinks do not work when exporting to PDF (Crystal and Visual Cut)

I have a question about Crystal Reports XI Release 2 and Visual Cut 11. I create reports in Crystal and export them using Visual Cut. Some reports contain hyperlinks to files on a network drive. However, the links only work while in Crystal. The PDF files that are printed through Visual Cut display the links, but they are not clickable. How can this issue be fixed?
In case it helps, the links also work when I export reports from Crystal to HTML, Word, and Excel, but not when I export to Acrobat. I believe it is a problem with tagging/accessibilityfeatures. So is there a setting/formula in Crystal or Visual Cut that would allow the exported PDF files to be accessible?

While Crystal exports to pdf indeed lose hyperlink functionality (both in Crystal as well as in Visual CUT), Visual CUT allows you to use Crystal formulas (acting as hidden Tags) to create hyperlinks in the resulting pdf file. Another option supported by Visual CUT it to automatically detect file references in the pdf text and turn them into hyperlinks. Contact MilletSoftware for more detail.
Edited by: Ido Millet on Oct 27, 2010 5:11 PM

Header is not complete when replying

When i write a reply i get a header from the previous email that looks something like this:
On Aug 31, 2009, at 6:00 AM, "John Smitch" <[email protected]> wrote:
But what i really want is something like this:
-----Original Message-----
From: John Smith
Sent: Monday, August 31, 2009 6:01 AM
To: Chris Tucker; Joe Conor
Subject: Re: Sales Review
Is there any way to change this?

Hi sharath,
Based on my understanding, the group header doesn’t repeat when you export report to PDF file.
In Reporting Service, the RepeatOnNewPage property has effect on static row members only and where KeepWithGroup is not None. If value for KeepWithGroup is None, the group header will not appear in a new page. As we tested in our environment, we set FixedData
as True, KeepWithGroup as After and RepeatOnNewPage as True, the group header repeat in second page when export to PDF file. Please refer to screenshot below:
So in your scenario, please check if you have set KeepWithGroup as After. Then export to PDF again to check if group header can repeat in multiple pages. If issue persists, please provide some detail information about your report design. If possible, please
provide some screenshots about your results before and after perform PDF render.
Reference:
Display Headers and Footers with a Group (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu

Table Header in freezed pane when exporting SSRS report to Excel

Hi,
I want table Header in freezed pane when exporting SSRS report to Excel.
Can I have the table header of tablix be present in freezed pane of excel.
Thanks,
Vivek Singh

Hi Vivek,
Please refer the following thread.
may be u get the answer.
How to freeze header pane in SSRS
Regards
msbilearning

I have a problem. When exporting from PDF to PPTX error "unable to process the document in the module Save As file is not created." What to do?

I have a problem. When exporting from PDF to PPTX error "unable to process the document in the module Save As file is not created." What to do?
Windows 7 64
PC

everything works on a laptop (

When exporting to PDF, the pictures are not the same size I "placed" them

I am "placing" pics that are 653 x 983 pixels, 300 DPI, using CS4. However, my issue is when exporting to PDF, the PDF doesn't look like the same size I "placed" the pic until I blow it up to about 350%. I do not have a printer set up to my computer so I can't do the print/pdf option. Am I doing something wrong here? I can't figure it out. Your help is appreciated. Thanks!

Well, right when I open the PDF, it's just way too small, imagine it being the size of a business card. I have to keep zooming in until it gets to the size I originally intended it to be. When I create a new document am I suppose to make it the same size as the picture?

Why does IBA not include the table of contents when exporting to PDF?

Why does IBA not include the table of contents when exporting in PDF? I can seee the TOC in iBooks Author but when I want to see what it looks like in a regular PDF, the TOC does not show up.

Strange question you ask here. Not sure why that is relevant to "why" IBA won't publish a table of contents in a PDF.
But since eyou asked, it's simple, I want to author some books in IBA and also see what they look like - completed - in PDF. Again, any suggestions as to a work around so I don't have to cut and paste back into Pages?

Audio and video do not sync when exporting

the audio and video content do not sync when exporting to media browser or quicktime.. at times the audio is delayed, or ahead of the video

Wow, I was just about to post something similar. I've tried 4 different times, wasted a few dvds, and tried various ways of outputting to solve this...nothing. Here's my situation;
• I have a series of stills, with music underneath...kind of like a slide show.
• That ends, both music and visual, and I go to a black screen/slug that is :22, to give some breathing room before the video that follows. Also, the audio track fades out at the end of the stills...it does not continue into the slug.
• After the :22 of black, I fade into a video. HOWEVER, everytime I've done that, the AUDIO portion of that video is starting while there's still black on screen, then when the video comes in, it's way behind.
I've adjust the audio to now end before the slug, thinking that was somehow making iMovie go wonky. Didn't work. I've wasted a few dvds before I got smart and started checking before burning. And still, everytime, that section is not syncing, but, i syncs in iMovie, where I made the video.
This is HUGELY frustrating.

Error in character spacing when exporting to pdf from word 07

I am having trouble with exporting to pdf from MS Word 07. The character spacing throughout the document is wacky. This also happens when exporting to pdf from a GIS program.
Any help?

I use the term export because that is how it is done in the GIS software that I use - ArcMap 10.
In MS Word I access Adobe Acrobat Pro 9 through the print menu. I am using Windows 7.
I do not always have this trouble, but it started yesterday on a 30 page word doc and then after that, it started on an ArcMap doc.
As for embedding fonts, when I check the Word doc as you suggested, i see many different fonts listed. Some are embedded, some embedded subset, some are not embedded at all. I use styles to manage font types and heading levels. There is nothing fancy about it - all Times New Roman.

Text wrapping when exporting to .pdf

I'm running Pages 5.2 on OSX 10.9.2. When exporting my document to .pdf, it does not retain it's text wrapping. When viewing the document in Pages, everything is where I put it. When viewing the document as a .pdf after exporting, some of the text will no longer be wrapped around some of the pictures. Which text no longer wraps around which picture changes every time I export, even without altering the document in any way. I have tried grouping the objects and the text together, which only seemed to cause more text to fail to wrap.

I'm using Acrobat X. I've attached a cap of the InDesign poster, and what I get when exporting to PDF -- I lose the title, and "Directed by..." (which is the same type size/color as the playwright). Also, I have overprint preview checked for automatic (and tried all the other settings, too).

When exporting to PDF fonts are replaced

I have had this happen several times when exporting to PDF from CS6 with no font errors, all the fonts have been changed in the PDF to another font. Not the default either, but just a different font altogether.
Has anyone heard of this or experienced this?

It is pretty easy to determine the fonts are wrong by visual inspection followed by the text edit tool in Acrobat X to confirm what font it is. The original fonts on this particular file were Gotham and they were replaced by Helvetica and our default missing font is Courier. I have found numerous threads with the same or similar problem dating back to September 2014 where they were blaming Indesign CC for the problem, with another person replying they had the same issue with CS6. Some of the advice given to them was to load the fonts locally rather than across a network to a server. The problem is not repeatable that is to say when you notice the issue with your PDF you open the file and export it again and the fonts are now correct with no changes to the file or the way you loaded the fonts. What is alarming is this is intermittent with no font warning while exporting or any further font warnings if the PDF is Normalized through Kodak Prinergy. It is like the postscript code is being written with a replacement font.
I have enclosed the thread I found and we are going to load fonts locally to see if this helps, if you have any other advice it would be greatly appreciated.
Ted
http://

Any way to reduce the resolution when exporting to .pdf

We are emailing reports. On some reports with a large number of jpegs we are hitting a size limitation. It would be helpful to reduce the resolution on the jpegs when exporting to .pdf. Any way that would be possible?

Hi,
Need more info-
VS version? or the developing application?
CR Version? Are you directly emailing your reports from CR designer?
Also once the image is fetched by the report, we can not make any changes in the image, as a work around you need to do required changes in the image before adding it to the reports, and as far as I know it is not possible through code, but we can wait for other responses though.
Sincerely,
Amit

Report Title and Text Area issue when exported to pdf using Viewer

Hi there,
We are using OracleBI Discoverer Version 10.1.2.55.26
We have reports that displays Report title containing the following
- Report Title
- Runt Date and Time
- Page No
And text area which displays 'Last Page'
Following properties are set at the worksheet level using page setup
Report Title --> 'Print on every Page'
Text Area --> 'Print on last page'
The report when exported to PDF using Discoverer plus works fine and displays report title and text area as defeined.
But when we try to export the same report to pdf from Discoverer viewer, it displays
- Report title on first page only.
- text area on all pages
All our users accesses report using discoverer viewer so we cannot open discoverer plus to them.
Is there a solution which will enable us to export the report in pdf using discoverer viewer and displays the same output as discoverer plus.
Please let me know... If you have any questions then please feel free to ask.
Thanks in advance for your help...
Manish

but when opened on other os x machines some text is colored differently than it should be
Well, if typographic objects are colour managed, the colour appearance is dependent on the source ICC profile that describes the colourants in the typographic objects and the destination ICC profile that describes the colours the display is able to form and the RBC colourant combinations that will form those colours.
In general, typographic objects should have special treatment, since the expectation is not that typographic objects should be colour managed, but that typographic objects should simple be set to the maximum density of dark. On a display, that is R=0 G=0 B=0 and on a seperations device (a lithographic press) that is C=0 M=0 Y=0 K=100.
If for some reason typographic objects are colour managed, and if the ICC profiles for the displays are off by half a mile or more in relation to the actual state of the display system, then the colours will not be the same. On the other hand, if those displays are calibrated and characterized, then the colourants will be converted to form the same colours on the displays.
/hh

Error when exporting a pdf in SAP

She sends me the error when exporting a pdf from the SAP system, this is the message:
X Object reference not set to an instance of an object.
I hope I can support.
Annex image

See your other thread.

Group Header is not repeating when exported to pdf in 2008 r2

Similar Messages

Maybe you are looking for