Groupwise not send mails to external users

Hello everyone.
I did a clean install of SBE with eDirectory, iManager, and Groupwise. Just when the installation can send emails to a user outside the domain (external user), but after restarting the mail server does not come to any external users, but if I receive them.

Originally Posted by amoron
Hello everyone.
I did a clean install of SBE with eDirectory, iManager, and Groupwise. Just when the installation can send emails to a user outside the domain (external user), but after restarting the mail server does not come to any external users, but if I receive them.
Did you setup internet addressing? Currently you have to manually setup internet addressing in Console One when setting up groupwise8 (see the docs for a how-to, its very easy). Without internet addressing, you'll be able to send emails to internal users, but not to external users, which seems to be the problem you are having.
Just FYI, this internet addressing problem is being addressed in the next patch, which is currently in testing.
-Hart

Similar Messages

Not send mail for external domains

Hi,
I have installed OCS 10g(10.1.2) in linux. All components ok, but i not send mail for external domain.
Att,
Mesti

I remember in version 9.0.2 that i configure in SMTP_OUTBOUND the IP of DNS external to send mail for other domains.
Mesti

Outlook does not send mail to extern domains

It says that "[550] 5.7.1 Rcpt command failed: Mail denied due to site's policy".
Web Access Client at the same time send mail to outside without any problems.
Outlook connector and Collaboration Suite ver. - 10.1.2.
Where is problem?

you should change the next value in smtp inbound
Enable Routing Control : active
allow message relay : true
allow message relay domain : *
flag process: -l
Recipient Rewriting Rules: $*@your host target smtp,$1@your domain target smtp,
example:
$*@mail.sinux.com.pe,$[email protected],
you should change the next value in smtp outbound
rele smtp : ip of your source mail or relay :port smtp
flag process: -l
Atte.
Yuri Garcia S.

Postfix will not send mail to external

Hi there!
I have a problem with postfix: i cannot send any mail to an external domain.
the message always appears in the mail queue with an MX-Lookup-Error
some information about the system:
The server has 2 NIC's :
eth0 : ip via dhcpcd from router, connects to the internal network
eth1 : ip via dhcpcd from router, the hot wire to the internet
i can reach any known (by me) mailserver via telnet on port 25 as normal user
i can ping every ip/tcp/whateveryouwant as normal user
but no mai delivery to any external mail server.
So what can be the problem?
Has anyone an idea?

ok, the postfix is running now for some weeks.
I'd solved the problem by reading and learning the postfix-configuration.
There's also a nice book (in german only) that has helped :
"Das Postfix-Buch" written by Per Heinlein.
It's written in a funny style, spiced up with real-live situations.
syl querdenker

Send email to external user using fm 'SO_NEW_DOCUMENT_ATT_SEND_API1'

Hi friends,
I wrote this code to send mail to external user from sap.
It did not work properly can anyone help me to send email to extenal user.
The return code after executing the function module is 2.
DATA: OBJPACK LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE.
DATA: OBJHEAD LIKE SOLISTI1   OCCURS 1 WITH HEADER LINE.
DATA: OBJBIN LIKE SOLISTI1   OCCURS 10 WITH HEADER LINE.
DATA: OBJTXT LIKE SOLISTI1   OCCURS 10 WITH HEADER LINE.
DATA: RECLIST LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE.
DATA: DOC_CHNG LIKE SODOCCHGI1.
DATA: TAB_LINES LIKE SY-TABIX.
Creating the document to be sent
DOC_CHNG-OBJ_NAME = 'OFFER'.
DOC_CHNG-OBJ_DESCR = 'abcd'.
OBJTXT = 'aaaaaaaaaaa:'.
APPEND OBJTXT.
OBJTXT = 'bbbbbbbbbb'.
APPEND OBJTXT.
OBJTXT = 'ccccccccccccc.'.
APPEND OBJTXT.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
RECLIST-RECEIVER = mail address.
RECLIST-REC_TYPE = 'U'.
RECLIST-COM_TYPE = 'INT'.
RECLIST-NOTIF_DEL = 'X'.
RECLIST-NOIF_NDEL = 'X'.
APPEND RECLIST.
Creating the entry for the compressed document
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM   = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM   = TAB_LINES.
OBJPACK-DOC_TYPE   = 'RAW'.
APPEND OBJPACK.
Creating the document attachment
(Assume the data in OBJBIN are given in BMP format)
OBJBIN = ' \O/ '. APPEND OBJBIN.
OBJBIN = '     '. APPEND OBJBIN.
OBJBIN = ' / \ '. APPEND OBJBIN.
DESCRIBE TABLE OBJBIN LINES TAB_LINES.
OBJHEAD = 'picasso.bmp'. APPEND OBJHEAD.
Creating the entry for the compressed attachment
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM   = 1.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM   = TAB_LINES.
OBJPACK-DOC_TYPE   = 'BMP'.
OBJPACK-OBJ_NAME   = 'ATTACHMENT'.
OBJPACK-OBJ_DESCR = 'Reproduction object 138'.
OBJPACK-DOC_SIZE   = TAB_LINES * 255.
APPEND OBJPACK..
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
     EXPORTING
          DOCUMENT_DATA = DOC_CHNG
          PUT_IN_OUTBOX = 'X'
          COMMIT_WORK   = 'X'
     TABLES
          PACKING_LIST = OBJPACK
          OBJECT_HEADER = OBJHEAD
         CONTENTS_BIN = OBJBIN
           CONTENTS_TXT = OBJTXT
           RECEIVERS     = RECLIST
      EXCEPTIONS
           TOO_MANY_RECEIVERS = 1
           DOCUMENT_NOT_SENT = 2
           OPERATION_NO_AUTHORIZATION = 4
           OTHERS = 99.
IF SY-SUBRC NE 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Hi,
Check in SCOT t-code whether it has been properly configred to send the mails
Regards,
siva chalasani.

Backend query to configure do not send mail

Hi,
We need to configure workflow notification mailer in production instance: The plan of action is as follows:
Change the mail_status to 'SENT' for all mails which are in queue.
Update the personalised status for all users to 'DO NOT SEND MAIL'
Select few users and set status to 'MAIL TYPE HTML' so that these users will be able to receive mails.
Configure workflow mailer.
Test the mailing service.
Now in above plan we need to find out backend query to update this status from backend for changing status to 'DO NOT SEND MAIL' as there are 200's of users. and manually would be time consuming.
Can you please guide.
Regards,

Hi,
Please see these docs.
How To Set Email Style Preference For All Users At Once? [ID 578574.1]
How To Update 'Notification Style/Email Style' Under The Notification Preference For All The Users Globally .? [ID 564713.1]
How to mass change Mail Preferences for FND USERS [ID 451929.1]
Thanks,
Hussein

Sending mail to external mailid from user exit EXIT_SAPLEBNF_005

Hai ALL,
iam facing problem with sending mail to external id from user exit exit_saplebnf_005 , this user exit for ROLE Determination of releasing of PO .
in this user exit i passed a user name for this role from one z table.
through workflow the mails are send to workplace of resposible person maintained in ztable.
now user requirement is they want some intimation in their outlook for they got mail in workplace .
can anybody help me.
Thanks .
sushmita.k

they can either define automatic forwarding in their SAP office to external e-mail OR they can set their external e-mail as preferred method of communication and they should receive mail to their external mailbox assuming that sending to external mail is supported in your system (check with BASIS folks).

Can not send mail from PR Workflow to the approver

Dear all,
I have issues about send mail from PR Workflow to the approver.
Now when user create PR and the corresponding user can receive the workflow items in SBWP.
But no email from the user to approver.
If I assign authorization SAP_ALL to the user that create PR. The approver can recieve the workflow item PR in SBWP and email to their mail
Can you tell me about the authorization that can allow the user to send the workflow item PR in SBWP and email to the approver?
Now user can send mail to external and internal mail and I also configured the mail server in SCOT and can successfully send a mail to users in SO01 by manually creating a message.
Now the approver not receive any email but can receive a workflow item in SBWP
Regards,
Pannee

Dear all,
Thank you for all suppport, Now I can solve issues.
Regards,
Pannee

Bursting Program not sending mails

Bursting Program is not sending mails , we have checked everything and looking good , not generating logs.
XML Publisher: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XDOBURSTREP module: XML Publisher Report Bursting Program
+---------------------------------------------------------------------------+
Current system time is 14-JAN-2014 07:50:56
+---------------------------------------------------------------------------+
XML/BI Publisher Version : 5.6.3
Request ID: 101436869
All Parameters: Dummy for Data Security=Y:ReportRequestID=101245852:DebugFlag=Y
Report Req ID: 101245852
Debug Flag: Y
Updating request description
Updated description
Retrieving XML request information
Node Name:RPC5150
Preparing parameters
null output =/u000/oracle/PTCCON/apps/apps_st/appl/xdo/12.0.0/out/ESCM1/EM185082.101436869
inputfilename =/u000/oracle/PTCCON/apps/apps_st/appl/ncr_custom/ncrx/12.0.0/out/ESCM1/EM185082.101245852
Data XML File:/u000/oracle/PTCCON/apps/apps_st/appl/ncr_custom/ncrx/12.0.0/out/ESCM1/EM185082.101245852
Set Bursting parameters..
Temp. Directory:/tmp
[011414_075107900][][STATEMENT] Oracle XML Parser version ::: Oracle XML Developers Kit 10.1.3.130 - Production
[011414_075107910][][STATEMENT] setOAProperties called..
Bursting propertes.....
{user-variable:cp:territory=US, user-variable:cp:ReportRequestID=101245852, user-variable:cp:language=en, user-variable:cp:responsibility=51687, user-variable.OA_MEDIA=http://ESPROD.daytonoh.ncr.com:8008/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=Y, user-variable:cp:parent_request_id=101245852, user-variable:cp:locale=en-US, user-variable:cp:user=EM185082, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=101436869, user-variable:cp:org_id=152, user-variable:cp:reportdescription=NCR_MFS_ACKNWLG_PDF_REP, user-variable:cp:Dummy for Data Security=Y}
Start bursting process..
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 14-JAN-2014 07:51:08
+---------------------------------------------------------------------------+

I was troubleshooting my own issue noted above and tried to send the attachments via gmail's web interface (bypassing Apple Mail). This time, gmail provided an error message stating that the file contained a virus.
Since it was a zip of several Word docs, I saved them as PDFs and then rezipped, and Apple Mail sent them off like a champ.
Evidently, Mail does not have a method for relaying the precise nature of the error message that gmail sends (in this case that the attachment had what gmail thought was a virus). This would be a prime area for some software developers to tackle on a future version of Mail.
By the way, the files almost certainly do not contain viruses; they are extremely old Word Docs that have been on my successive Mac hard drives for at least 9 years. Too old a format for gmail to recognize?
Hope this helps someone who may be having the same trouble.

How to send mails to external maild like yahoo

I am using 'SO_NEW_DOCUMENT_ATT_SEND_API1'
funtion module to send mails to internal office mail ids and working correctly .
Not the requirement changed . I need to send mail to external mail id like
per at the rateyahoo dot com also.
What can I do to send mail to external mailids like yahoo.
Do I need to use flag some thing ?
THANSK IN ADVANCE.

Hi,
Hi,
It is posible to send the mail to external address usign the above FM . But some configurations have to be maitnaied in SCOT Tcode for INT (Internet) ->SMTP protocal. we need to give the Mail Host and Mail Port all this information is usually done by the BASIS. Please approach them for these settings and try again with the FM. Here we have to configure it to Yahoo so that we can send the mail.
Regards
Lekha

Mail will not send mail, only receive.

I have spent the majority of today re-installing OS X and all necessary updates, music, data after the death of a hard drive. Luckily everything went perfectly, except for the same problem I had with Mail even before the 1st hard drive died. Mail will not send mail, only receive.
All efforts time out and give me this message: "The connection to the server mail.earthlink.net on port 25 timed out"
Mail used to send messages, but stopped suddenly in 2004 and has yet to start again. Any idea guys?! I can't figure it out, under Account settings I have necessary fields filled in: Outgoing Mail Server (SMTP) is set to "mail.earthlink.net", Server Port is set to 25, and Authentication drop menu is set to None.
Any help would be greatly appreciated.
--DANIEL

This is NOT a problem with Mail or OS X. This is an incorrect settings problem - garbage in = garbage out and this information is certainly available at Earthlink's website and Earthlink also provides technical support.
Earthlink has an authenticated SMTP server they changed to long ago.
SMTP Server: smtpauth.earthlink.net
Server Port: 587 but 25 should work if you are using Earthlink as your internet service provider for connecting to the internet.
Use SSL: Off or not selected.
Authentication: MD5 Challenge-Response
User Name: Your ENTIRE Earthlink email address.
Password: The account's password - the same password used to check the incoming mail server for new messages.

Problem while sending mail to external mail ids

Hi All,
while trying to send mail to external mail ids through some custom program, i'm facing an error as "recipient not in address management".
Can anyone giude me why this is occuring and actually what is this Address management?
Thanks & Regards,
Anil.

Hi,
Check this sample code..
http://www.sapdevelopment.co.uk/reporting/email/email_mbody.htm
* Add the recipients email address
clear it_receivers.
refresh it_receivers.
 it_receivers-receiver = p_email.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
append it_receivers.
what Fm you are using..?are you specifying like above for e-mail address..
Regards
vijay

Send mail to multiple users in outlook through workflow

Hello Experts,
I have a requirement where I have to fetch all the email ID (abc@companycom) under support team in an org unit and send mail to these multiple email ids when a support message ticket is created in transaction CRMD_ORDER.The BO for this is bus2000116.Now I have created a ZBO with supertype as bus2000116 and a custom method where I am fetching the email Ids.I have also created an EXPORT MULTILINE parameter (EMAIL_ID) for this method of type ADR6-SMTP_ADDR.I have tested this ZBO and it is correctly fetching all the email ID in this parameter.
Now in my workflow builder,I have created a Activity type and here I have created a custom task calling my ZBO and custom method of fetching email id.I have also created a container(EMAIL_ID) for this task of type ADR6-SMTP_ADDR.Here I have binded the task(fetch email step) to workflow.In the Agents I have given &&EMAIL_ID&& in expression as this is the container.
After this step I have added the mail step and in the reciepient type I have given G organizational object and expression as &EMAIL_ID&.Here I have added a standard task(TS45308726) with BOR as (SELFITEM and method as SENDTASKDESCRIPTION)for sending mail to these multiple ids to outlook.
I have activated the builder and tested it.In the log I can see,the event has been triggerred,workflow is started,but workflow status is set to error.The step fetch mail is getting executed correcttly with 4 email ids in the container.and the third step send mail is also failed.giving error as "Work item 000000066700: Object 000000066700 method SENDTASKDESCRIPTION cannot be executed".
Kindly give your valuable suggestions to rectify this issue.In SBWP i could see the workflow started but mails are not reaching my outlook.Your solution will be highly appreciated.
Thanks & Regds
vlp

Hello Everyone,
I have another issue.My workflow when directly executed sends mail to all users very quickly.All steps gets executed very quickly.This I could see through the workflow log and SOST and SCOT.But when I try to trigger the workflow through my transaction CRMD_ORDER(i have given proper BO and event) it is taking hours and still in Inprocess status.Infact its not even going to the first step(fetch email ids).
I am totally confused on this behaviour.Kindly provide your ultimate solutions and I am very thankful for giving such good solutions to all my queries.
Regds
VLP

Failed to send mail to external domain via portal

Hi Gurus,
By following the configuraion instructions in SAP library - Collaboration - Groupware - Installing and Configuring E-Mail Connectivity, I managed to send mail to recipients who reside in same domain e.g. [email protected] via portal.
However, I failed to send mail to external domain e.g. [email protected]. I got the following error message:
The mail could not be sent to the specified recipients com.sap.ip.collaboration.gw.impl.transport.javamail.exception.MailSendException: The mail could not be sent to the specified recipients
 at com.sap.ip.collaboration.gw.impl.transport.javamail.JavaMailTransport.sendMail(JavaMailTransport.java:183)
--------- exception is chained. Original exception ------------
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
 javax.mail.SendFailedException: 553 sorry, that domain isn't in my list of allowed rcpthosts (#5.7.1)
 at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:804)
 at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:320)
Please help.
Thanks alot.

Hi Ajey,
Thanks for your reply. I had tried your suggestion but same problem occurred with same error output.
Actually, I encounterred this error message before in my Microsoft Outlook, where System Admin returned me a mail saying that, my mail was undeliverable with the same error message. But this can be solved by applying the Internet Email Account Setting - Outgoing Server - My outgoing server (SMTP) require authentication.
So I am wondering,
1) This problem is caused by SMTP server?
2) Is there any workaround (like the Outlook Setting) I can configure in Portal?
Do you have any idea?
Thanks,
HauChee

ALERT---ALERT since upgrading to last version 1/2 hour ago I can NOT send mail-ALERT ---

HI,
I upgraded to the latest version half an hour ago. My TB is in French. Since then I can NOT send mail. A window appears with the mention " adjunction of // ajonction de" and the blue bar keeps going up to 10 minute. After 10 min i decided to abort, restart TB, make another testmail but same problem.
Please act quickly

Hello,
Certain Thunderbird problems can be solved by peforming a ''Clean Reinstall''. This means you remove Thunderbird's Program Files then reinstall Thunderbird. Please follow these steps:
#Download the latest version of Thunderbird from http://www.mozilla.org/en-US/thunderbird/ and save the setup file to your computer.
#After the download is complete, close all Thunderbird windows (Click Exit/Quit from the menu button on the right).
#*'''Windows:'''
#** C:\Program Files\Mozilla Thunderbird\
#** C:\Program Files (x86)\Mozilla Thunderbird\
#*'''Mac:''' Delete Thunderbird from the Applications folder.
#*'''Linux:''' If you installed Thunderbird with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Thunderbird on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/en-US/thunderbird/ Thunderbird Download Page], simply remove the folder ''thunderbird'' in your home directory.
#Now, go ahead and reinstall Thunderbird:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to open Thunderbird after clicking the Finish button.
WARNING: Do not run Thunderbird's uninstaller or use a third party remover as part of this process, because that could permanently delete your Thunderbird data, including but not limited to, extensions,emails, personal settings and saved passwords. These cannot be recovered unless they have been backed up to an external device!
Please report back to see if this helped you!
Thank you.

Groupwise not send mails to external users

Similar Messages

Maybe you are looking for