Growing file import and refresh issues

1) With files generated by our own MOV/op1a writers, we get different results with different wappers, different OS platforms and versions, and different storage filesystems, both using CC 7.1 and CS6.05
Quicktime files on the Mac, OS 10.7.5 to a Samba share: refresh will only work by putting Premiere into the background then bringing it to the foreground to force the update.
Quicktime files (any codec) on a win7 PC writing to an NTFS share: we get sporadic updates, although in about 98% of sessions, the file will update once or twice after import and then never again during that particular CC/CS6 session. Exiting the program, reopening it and loading the project again will update the duration. After closing the file, the duration updates instantly in both CC/CS6
-- For Quicktime files, it seems like some sort of cache file is written that does not get updatedand premiere looks at this instead of polling the current state of the file.
op1a XDCAM - on PC at least we get a sharing violation when attempting to open, much as in this discussion on the Adobe Community Premiere site: http://forums.adobe.com/message/4746601
op1a AVC-I not tested yet.
2) With Adobe Media Encoder CC doing the writing, we get no joy whatsoever. Only tested on win7/NTFS share
op1a XDCAM on import CS6/CC returns "file is open in another program" error.
op1a AVC-I on import CS6/CC returns "file is open in another program" error.
Quicktime (any codec) file import error or crash.
All types import correctly after the files are closed.
-- seems that the AME openfile() handle type is write-only, so Premiere can't open it for reading.
So...I guess my first question is, what growing file source has this feature been tested with, on which OS and storage filesystems?
There is virtually zero documentation and what little exists is very unspecific or contradictory...

Ken,
There are numerous posts on this subject. Currently LR treats same name, different extension files as sidecars of each other. Check out the numeroues RAW + JPG posts for example.
Import your files into different folders and then move them into the folder you want for now.
Hopefully this behaviour will be changed in the forthcoming 1.1 release mentioned by Jeff Schewe et al.

Similar Messages

Mac os 10.9.5--elements 10--go to file import and my scanner isn't listed

mac os 10.9.5--elements 10--go to file>import and scanner not gown

The members of the Photoshop Elements forum can best answer and followup on your question.
Gene

File/Import and Page Layout not working anymore

I have a question about old software: FrameMaker 6.0 on a Mac. (While Adobe encouraged me to purchase this in 2001 for the chemistry textbook I am writing, I had invested to much to abandon it when Adobe abandoned the Mac version a few years later.)
I have imported dozens of images files into the 750 page book and FrameMaker has accepted both tif and jpg formats. The way I did it was to create an anchored frame in the textbook, click on it, and then File>Import and select the image file and then choose whether I wanted it to be referenced or actually in the text. All of this worked fine... until a couple of days ago.
Problems
1. I no longer get Import as an option under File and
2. FrameMaker no longer recognizes tif and jpg files under "All Readable Documents" when I do File>Open. I have to click on Show All Files to see them.
As a result I am unable to import any tif or jpg files into the FrameMaker textbook.
What's curious is that I have 6.0 installed on both a G4 and a PowerBook and this problem has occurred on both at the same time.
3. And I just discovered that when I do Format/Page Layout the half a dozen or so custom formats that I had are no longer listed.
So what has caused this loss of memory for Framemaker that it can no longer do what it has done for me for years. (I am somewhat sympathetic to it's memory loss myself as a 78 year old user.)
The G4 has been unplugged recently but in the past it has been unplugged for a week or so and there were no problems.
Fred Tabbutt

adiabatic wrote:
I have a question about old software: FrameMaker 6.0 on a Mac. (While Adobe encouraged me to purchase this in 2001 for the chemistry textbook I am writing, I had invested to much to abandon it when Adobe abandoned the Mac version a few years later.)
I have imported dozens of images files into the 750 page book and FrameMaker has accepted both tif and jpg formats. The way I did it was to create an anchored frame in the textbook, click on it, and then File>Import and select the image file and then choose whether I wanted it to be referenced or actually in the text. All of this worked fine... until a couple of days ago.
Problems
1. I no longer get Import as an option under File and
2. FrameMaker no longer recognizes tif and jpg files under "All Readable Documents" when I do File>Open. I have to click on Show All Files to see them.
As a result I am unable to import any tif or jpg files into the FrameMaker textbook.
What's curious is that I have 6.0 installed on both a G4 and a PowerBook and this problem has occurred on both at the same time.
3. And I just discovered that when I do Format/Page Layout the half a dozen or so custom formats that I had are no longer listed.
So what has caused this loss of memory for Framemaker that it can no longer do what it has done for me for years. (I am somewhat sympathetic to it's memory loss myself as a 78 year old user.)
The G4 has been unplugged recently but in the past it has been unplugged for a week or so and there were no problems.
Fred Tabbutt
I don't know if read-only files are recognized by FrameMaker to the point where it will dim commands that need to write to the files.
It's always a good idea on Mac to repair permissions with Disk Utility - make sure you have good backups, just in case.
Have you tried saving a file that can't import as MIF, then opening the MIF version to restore the file, and perhaps lose any corruption in it? This is called the "MIF Wash."
I think the latest Mac OS that FrameMaker can work with is system 9, or the Classic simulator that runs on the OS X release called Tiger. I'm sure you'd know if you changed operating systems in this period. Classic won't run on Intel Macs.
I have no other clues about what might cause this, except the general thought that something has changed on your systems or in the files you're working with. Does the problem persist in a brand-new file you create on your local drive? If you're working with FM files on a network, have you tried the process with files on your local computer drive? Have you quit FrameMaker and restarted your Macs? Any change? If you have a cloned bootable backup of your stuff from before the problem arose, you might want to try cloning your problematic drive to a new bootable backup, then restoring the known good clone, to see if it works.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

File-import and there's no printer listed to scan from

I want to scan an image from my Canon MG5220 printer's scanner directly into Photoshop CS5 (recently got new computer and printer). Before I've always been able to go into Photoshop, select File>Import and i see the printer there. However this time I don't.
In system preferences i have selected that printer as the default scanner.
I have also installed the printer on my computer with its CD.
Any ideas?

Did you install the optional TWAIN plugin? If not, go download and install it. (but remember that it was made optional because so many TWAIN drivers crash)
And your scanner driver may be limited to 32 bit addressing mode. Try launching Photoshop in 32 bit mode.

WIndow scrolling and refresh issues.

I am having problems with intermittent window scrolling and refreshing. I noticed it first in Safari but I have confirmed it is happening in other applications as well. Typically I have no problems with window scrolling and refreshing. At times however, it becomes sluggish. For instance, I will be reading a web page and attempt to scroll down and the there will be a delay of approximately one or two seconds before the window updates. This occurs whether I am using the keyboard, trackpad or mouse to scroll. There is no video tearing or graphics artifacts, just a delay followed by an updated window. During this time, moving windows also results in a delay of one or two seconds. Again, there is no tearing or artifacts, the window just appears in it's new positioning seconds later. This unfortunately makes the system near unusable as I can not accurately scroll or position. The problem occurs whether or not I have a significant number of applications and the CPU and memory usage is not abnormal. Restarting solves the problem temporarily but it still returns. Oddly, activating show desktop or show all windows via Expose eliminates the problem for some time as well until it returns later. My system is up to date with 10.5.6.
Seems like a problem with WindowServer. Has anyone seen this before or have any suggestions?

Did you ever get an answer to your window scrolling issue. My new PowerMac seems to always have this issue now. (I just moved to the Intel platform from the G4.) Thanks for any help you can give.

Media Encoder Hangs on File Import and Playback

Media Encode Hangs on launch (extremely slow not normal). When I drag and drop a file it hangs or using file import it hangs. Encodes that should only take a few minutes are listed as 1 hour.
I use media encoder all the time it does not perform like this! Anyone else experiencing these problems?
Thanks,
System Info
Z800 8 core 12Gig Memory Nividia FX5800 Adobe CC Suite lastest updates. (Media Encoder 7.2)

Still experiencing unexpected behaviour when drag and droping files into project window. I have draged the same file sometimes it loads instantly other times it takes as much as 3 minutes to load. The file size is 354 mb. No other programs are running. Anyone have similar behaviour?

Tags, no longer displaying file names and other issues

I upgraded to Mavericks, MacBook Air.
I need help sorting out what is going on with Tags.
I have a screen shot, but uploading it to this post is another problem I have run into with Mavericks. I click on the camera icon, click on upload file, and then I get a list of greyed out files, and am unable to select any of them. Very unmac like.
Back to the tag issue. The tags are listed in the open finder window. Most of the tags I have created, when selected, will display all the files with that tag, and show the file name or icon.
BUT, one of my tags, which has over a thousand files, will not display the file names. What is shown are a list of blank icons, and no file names. The preview for each file still shows as it should when a file is selected, and the file name is listed in the preview.
A picture is worth a thousand words, so I really wish I could have uploaded the screen shot!
In addition, some of the files, e.g. a .pdf file, will show no icon, no file name, no file size, but will open when double clicked and dispaly the file name and a greyed out addition to the file name "-Locked". Much weirdness.
Tags have not been working well for me. I have used colours extensively in the past for organization and now it seems to be a huge problem converting to tags. What a painful transition from Mountain Lion!

With the backup completed, I followed your suggestion:
"Go to your Finder "Go" menu hold the option key and choose Library. Then go to Preferences folder and trash these files:
com.apple.finder.plist
com.apple.sidebarlists.plist
Then, restart, or log out and in again."
The smart folders disappeared. The original Tags named by colour are back on the list of Tags, and the problems remain unchanged.
In the Tags I created for my file collection, call it the LotsOfFiles folder, there are no file names listed, none.
However, when I changed the permissions on every file in the LotsOfFiles folder to Staff-Read & Write, then I was able to change, add, and delete Tags from the files. Also, once the permissions were changed the file names appeared, after five minutes... so I edited this entry when I discovered the change.
The files in LotsOfFiles have been collected since 1995, and have been saved to many computers and many backup systems. They also have been used, saved, changed etc. in operating systems dating back to OS7, and almost every operating system up to 10.9. They also are being used on different computers right now, one running OS 10.3.9. one running 10.7, and one running 10.9. The computers all have different admin logins and info.
But I still can't upload files to this forum!

Let's all contact Apple about CD imports and burning issues

While reading through the posts here, it appears that there are alot of us with issues dealing with iTunes and CD imports and CD burning. Even using Quicktime 7.1.3, I still cannot even play a CD track. I can use other applications to import music, but the bottom line is that iTunes should let us import CD tracks. It doesn't. If you are having problems with these slow CD imports, or CD burning with iTunes 7, then we all need to contact Apple. I suggest that instead of trying to find a workaround, lets all get Apple to correct their iTunes application. When you open iTunes, click on iTunes in the toolbar across the top of your monitor and scroll down to the line "Provide iTunes feedback" Fill out the questions and describe exactly what CD import/burning issues that you are having. We will not hear back from Apple individualy, but if we all start letting them know directly that there is an issue, maybe they will get the message and fix these problems. We all appear to be passionate about Apple and iTunes. Lets get these problems resolved. Okay?

I am having no problems. I did with my Ti667 when the optical drive died.
I am onto the latest version of iTunes and can report no problems for me.
Oppp......... my iTS country changes and I changed back and my account is in good order.
MJ

File size, importing and tagging issues in making form accessible

Hello:
I'm needing to import a Word document into either Adobe Pro X or LiveCycle ES2 v9, while making the form accessible to screen readers. The problem is that the source Word document is 405kb and is a 17 page application form with various sections that were created by using complex tables that contain checkboxes and text and no use of Styles.
I've since been trying to tag the document myself, but, it looks like all of the content then needs to be tagged for the screen readers to pick up (tried running Read Out Loud, and the non-tagged info was not read), but not 100% certain. Also, it may increase the file size. Only on page 1 and its alread 900kb with tagging.
I tried importing the Word source document into LiveCycle and received a 1073741819 error and it would not import. \
If anyone has any insight on how I might import a complex Word form into Adobe Pro X or LiveCycle, tag it for screen readers, and keep the file size accessible, I would appreciate it.

You can apply at text within Acrobat Pro. In the Tags pane, right click the applicable tag and select Properties. You will see the Alternate Text field on the Tag tab of the Object Properties. There may be other, possibly better solutions such as marking the special characters as artifacts, and applying OCR to the text-as-image - hard to say without seeing a sample document.
Read Out Loud is not the best tool for checking accessibility, by the way. With 900+ documents to deal with, you might want to try using a screen-reader-emulator such as the one built into the free PDF Accessibility Checker (PAC) 1.3 (http://www.access-for-all.ch/en/pdf-lab/pdf-accessibility-checker-pac/dl132.html)
Hope this helps.
a 'C' student

PLS-00753: malformed or corrupted wrapped unit; Import and Export issues

I'm new to oracle, please help me with below...
After a full import as follows:
imp username/password FILE=dump_file.dmp log=logFile.log ignore=y full=y &
I face two issues and they are:
1. I find that a partitioned table is missing. Verifying with the other team(who did the export), i found that they gave a full export. Hence shouldn't all objects of the user be exported?
What could be the reason for it?
2. Also there is package which is wrapped, and compiling it gives me this error-
PLS-00753: malformed or corrupted wrapped unit
How do i find the reason behind and rectify the same?
M using Oracle 10g.
Thanks in advance....
Edited by: Shruthi PR on Aug 31, 2012 12:08 AM

You can do one more thing if they're not willing to give you export logs/responding slowly.
You can use the option show=y which will show the structure of the objects in the data dump. But remember this will take time; If your dump is very huge, you have to think twice before using this option.
If you don't have metalink access, see the snap here
+*<Moderator edit - deleted contents of MOS Doc - pl do NOT post contents of MOS Docs - this is a violation of your Support agreement>*+

Canon FS100 import and quality issues

I have a imac (lastest model) and imovie 11. I have a canon camcorder. Flash memory one. I movie cannot read the mod files form camcorder or if I make them mpg's they still cannot be read.
If I try to import them via usb into imovie there is alot of image degradation. If I do this on a windows computer, the image quality is perfect.
What can I do to fix this problem on a mac?
Michael Zwibel

see my posts in another thread on issue of S50 and RAW and iPhoto and Preview.
submit feedback via iPhoto to Apple and request support script...Apple messed up.

LCM Import and Export Issue

Hi
I am trying to migrate a HPS application. But while exporting it i am getting the below eroors in LCM log file.
Application artifact listing metadata contains duplicate resource information for /Objects/Application Model.
Empty Zip input stream. Data not available to save.
error /Objects/Application Model - Artifact Exporter: Failed to export artifact.com.hyperion.pmd.hps.lcm.artifactExporter.LCMArtifactExportException: Failed to get export Objects.
I tried doing it through Utility.sh after saving the migration definition but getting the same error.
Any Suggestions on this.
Thank You
Regards
Sandeep Kumar Upadhyay

Hi Kyle
In my case .. i am trying to export Scorecard app .. and scorecard has got only two artifacts.. i had tried exporting them individually too.. but same error.. what i am confused with is .. it is not giving any issues to me on my DEV env.. I do not know if there is some issue related to env setup... As of now.. i do not have any ideas on how to troubleshoot this.. Any ideas on this are welcomed.
Thank you
Regards
Sandeep Kumar Upadhyay

Import and Folder Issues

I've spent hours trying simply to consolidate some images into various folders. I'm trying to import a file with the extension .CRW into a folder and get the message that (same filename).psd already exists in the folder. Yes, it does, but I want them both. Why is that a problem?
Next, I want to move three files from one folder to another but I get the message that (filename).XMP already exists in the destination.
So I created a new folder and tried to move the files to that folder. Two of them moved, but the third one didn't. I've repeated this several times, but the remaining file just stays in the original folder.
I already started over with a fresh database once and lost many hours of work. I can't afford to do it again.
Please help!

Ken,
There are numerous posts on this subject. Currently LR treats same name, different extension files as sidecars of each other. Check out the numeroues RAW + JPG posts for example.
Import your files into different folders and then move them into the folder you want for now.
Hopefully this behaviour will be changed in the forthcoming 1.1 release mentioned by Jeff Schewe et al.

Binary file import and export in lab windows cvi

Hello,
I have some standard binary file format (.sie) that has been written in origin IDE. The sie type extension file format is a public format, but not defined by Origin. In origin IDE, i can be able to import these files and also be able to export it to excel as csv type. Now, i want to do the same thing in lab windows cvi. i need to import .sie type file and be able to read and export it to excel in lab windows cvi. Is this possible? Please help me to work on this project. Thanks in advance.
Regards,
Jayakumar.V

Reading and writing binary file is indeed possible in CVI, the problem normally lien in the definition of the file format you want to access.
I never found .SIE extension during my activity; a fast search on google returned this page with a link to the document explaining one file structure: it's a format dedicated to accounting so it's possibly not your case, but could they be your files?
Before finding the complete description of the file format you cannot think of any operation on the file itself, unless it is so self evident that you need little effort to access file content (this normally happens only on text files).
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Safari browser and refreshing issue.

Lets say I am on a forum page, I can refresh the page in two ways. Either I hit the refresh button on top or hit the bookmark page of the same page. This works on my old phone and the replacement, except for facebook issue.
On facebook, it did it this way before the replacement phone from Verizon and on the replacement it doesn't do it. I have to hit the refresh button on top, it doesn't refresh from the bookmark page. Also if I am on my feed, it automatically refreshes and goes to the top, sometimes. Is this a facebook issue or a certain setting. If it's just facebook, I don't really care but I don't want this issue on other Internet pages, kind of annoying.
Thanks, sorry for Grammar issue or if confusing question.

The bookmark button is not supposed to refresh it as of newer iOS operating systems

Growing file import and refresh issues

Similar Messages

Maybe you are looking for