GT780DX FPS Drops for 10 seconds - power also drops for same time

Hi,
I was wondering if anyone has had a similar issue to the one i'm experiencing.
I can be playing a game at 100fps no problems then it cuts down to 20fps for anywhere between 8-15 seconds. At first I thought it might be a heat issue or perhaps a throttling issue attached to heat. Eventually having installed throttlestop and logging some data I discovered that my power was dropping down to that of battery power at random intervals.
Do you think this might be the PSU cord thing itself or an error internal to the system?
Thanks for any help

Quote from: sotla on 20-November-12, 01:33:57
Hi,
I was wondering if anyone has had a similar issue to the one i'm experiencing.
I can be playing a game at 100fps no problems then it cuts down to 20fps for anywhere between 8-15 seconds. At first I thought it might be a heat issue or perhaps a throttling issue attached to heat. Eventually having installed throttlestop and logging some data I discovered that my power was dropping down to that of battery power at random intervals.
Do you think this might be the PSU cord thing itself or an error internal to the system?
Thanks for any help
First, I would do a few things....
1. While playing a game, monitor the GPU temperature (MSI Afterburner works well). Is it getting up above 80 degrees C? If so, you have a problem....
2. While playing a game, monitor the CPU temperature. Is it getting up above 80 degrees C? If so, you might have a problem....
3. If the above 2 are not getting too hot, then you might really have a problem with the power adapter. I'm not sure how you would really monitor that, aside from watching the Windows icon to see if the battery is discharging or charging. If that's the case, a new adapter would most likely fix the issue.

Similar Messages

My iphone 4 locked up for several hours. i then tried to reset by holding down the home button and power button at the same time for 10 seconds and then the home button for 10 seconds. it is now completely black. what do i do? couldnt restore it in iTunes

My iphone 4 locked up for several hours. i then tried to reset by holding down the home button and power button at the same time for 10 seconds and then the home button for 10 seconds. it is now completely black. what do i do? couldnt restore it in iTunes. Has anyone had this problem? Help!

Same thing happened to me today. I wasn't even using the phone for the past 6 hours and suddenly I can't connect to the internet, none of my internet apps would work - nothing. I tried to call AT&T from the iphone and it locked up - couldn't turn it off, change to the home screen - nada - brick.
Did the Home/Power button thing and that worked but this I've only had this phone for about 4 weeks and it's locked up more times than my 3GS did the whole two years I had it! Ridiculous

I am having mac book air 2012model i had installed mavericks and use it, i long press command and power button at a same time and i saw the command prompt, from that i had formated the total hard disk. how to i want to install the OS again ?

I am having mac book air 2012model i had installed mavericks and use it, i long press command and power button at a same time and i saw the command prompt, from that i had formated the total hard disk. how to i want to install the OS again ?
i tryed with download mavericks but finally its saying a error message like cant conect to istore like that its saying and every thing is clear like internet and other stuf i tryed with 3times no progress same error pls help.. i bought this lap for my bro with his apple id only we use it now he got a new mac book pro so he gave to me so i formated and use it i use my apple id is that problem come because of changing apple id ? pls eplain

Firstly, what is the source of the 10.6.4 disc? Is it the original installation disc for your MacBook, or one 'borrowed' from another computer?
It isn't the retail version, because that's 10.6.3.
Assuming it's the correct disc (i.e. the one that shipped with your Mac), you need to boot from it again.
OK the language page.
From the installer screen, ignore the continue button, go to the menu bar and choose Disk Utility from the Utilities menu.
In DU, select your internal drive in the sidebar (the top item with the makers name and serial no.).
Run Repair Disk. If that comes up as disk OK, click the partition tab. Select the partiton from the drop-down above the graphic; 1 partiton is all you need.
Go to the options button and ensure that the partition scheme is GUID and the file system to Mac OS Extended (Journalled). Name the partiton (usually Macintosh HD), click Apply.
When the Macintosh HD volume appears below the drive name, quit DU and see if you can then install.
If the screen after the language screen doesn't show the menu bar, it may be necessary to use another Mac to do the job with the MB in Firewire Target Disc Mode. If it won't boot in TDM, or the MB doesn't have FireWire then it's getting very difficult.

Concurrent timers are not getting invoked for same timer inf

Do weblogic has some parameter in weblogic deployment descriptor like numAlarmThreads="5" minThreads="1" maxThreads="10" etc
becoz I am facing one problem relating to timer service in EJB
Problem Scope: Concurrent timers are not getting invoked for same timer info (Serializable object containing the details of timer).
Details : I am implementing EJB timer 2.1 and when ejbTimeOut execution of one timer exceeds the interval time, next timeout doesn’t happens till the execution of first ejbTimeOut completes . Ideally the timers should behave in the manner that on every interval the ejbTimeOut should occur no matter the previous timeout is completed or not
for example : consider there is timer T whose timeout occurs every minute, and on every timeout it calls process P, so on every minute ideally container should give call to process P irrespective of the previous status of P (call is complete or not). In our case next call to process P is not happening after timeout also since it is waiting for previous call to P to get completed

You should also cross-post this in the WebLogic EJB forum:
WebLogic Server - EJB

Concurrent timers are not getting invoked for same timer info (Serializable

Problem Scope: Concurrent timers are not getting invoked for same timer info (Serializable object containing the details of timer).
Details : I am implementing EJB timer 2.1 and when ejbTimeOut execution of one timer exceeds the interval time, next timeout doesnt happens till the execution of first ejbTimeOut completes . Ideally the timers should behave in the manner that on every interval the ejbTimeOut should occur no matter the previous timeout is completed or not
for example : consider there is timer T whose timeout occurs every minute, and on every timeout it calls process P, so on every minute ideally container should give call to process P irrespective of the previous status of P (call is complete or not). In our case next call to process P is not happening after timeout also since it is waiting for previous call to P to get completed

You should also cross-post this in the WebLogic EJB forum:
WebLogic Server - EJB

Concurrent timers are not getting invoked for same timer info

Problem Scope: Concurrent timers are not getting invoked for same timer info (Serializable object containing the details of timer).
Details : I am implementing EJB timer 2.1 and when ejbTimeOut execution of one timer exceeds the interval time, next timeout doesn’t happens till the execution of first ejbTimeOut completes . Ideally the timers should behave in the manner that on every interval the ejbTimeOut should occur no matter the previous timeout is completed or not
for example : consider there is timer T whose timeout occurs every minute, and on every timeout it calls process P, so on every minute ideally container should give call to process P irrespective of the previous status of P (call is complete or not). In our case next call to process P is not happening after timeout also since it is waiting for previous call to P to get completed

You should also cross-post this in the WebLogic EJB forum:
WebLogic Server - EJB

I came home and attempted to power on my iPad2. I can see the backlight but nothing on the screen. When I try to reset by pushing the off button and the power button at the same time I can sometimes see the characters briefly but the screen has lines and

I came home and attempted to power on my iPad2. I can see the backlight but nothing on the screen. When I try to reset by pushing the off button and the power button at the same time I can sometimes see the characters briefly but the screen has lines. Can someone tell me if there is anything else I can do before a trip to the repair shop?
Will

If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

The display on my iPod is extra large and I am have no idea why. I tried the HOME button and the power button at the same time but that doesn't work. I can't even enter my code to unlock it because I cannot scroll the HUGE display! Any ideas??

The display on my iPod Touch is HUGE and I have no idea why. I tried the HOME button and power button at the same time.....no help. I cannot enter my unlock code because I can't scroll without entering a wrong number! HELP!!

Using three fingers, double-tap the screen.
http://support.apple.com/kb/TS3129

I-phone shuts off, I have to hold the home and power button at the same time to get the icon to show up. Then have to hold the home button. I'm restoring my phone multiple times a day just to get it to work. help!

i-phone shuts off, I have to hold the home and power button at the same time to get the icon to show up. Then have to hold the home button. I'm restoring my phone multiple times a day just to get it to work. help!

Are you restoring as new?

Internet, but not local, service always drops at same time each day. HELP!

Hi there,
At first this was laughable but now it's becoming a real pain. For the past three weeks, sometime between 4 and 6 AM my router or modem drops the internet connection, but leaves the local only service in place. After a simple reboot with the router everything is back to normal. I am wondering what could be causing this? It's always at the same time. This doesn't happen at all during the day. The router does not indicate a problem with anything, since it can still generate local service, just not internet.
We did recently upgrade to the high speed internet up to 7000 instead of 2000. It's been happening since then. We're using a Westell 2200 modem (have had for years, it seems) and an Apple Airport Extreme for a router.
Any ideas would be appreciated. I am not sure how to get the numbers that were spoken of. I do have a phone plugged into another jack, but that's it. Have the inside wire maintenence plan if need be.
Thank you!
---Sarita

I had the same arrangement and Verizon sent a new 6100 modem/router for the higher speed service. The old modem did quite well but could not maintain the higher speed sync. I was advised by Verizon, when I upgraded to the higher turbo speed, that a new modem would be needed. I received one for no charge. I was surprised that the old unit performed as well as it did considering it was not designed for the higher speed. I suggest you call Verizon and request a new unit. I am in MA also.

How to find the moving average for perticular time step for same time series

Hello everyone,
I am new in labview and I have one issue. I have a huge text file with the different pressure value of different ports.
I make the VI in which first I read the text file and identify the perticular port column. In that column there are 32768 pressure value.
Time Num Port 101 Port 102 Port 103...... Port 532
0 1
0.001 2
50 32768
And this all reading takes in 50 sec and I have to split this readings in 4.5 sec... in every 4.5 sec there are 2969 values...
Now please go throw the attched VI... i am able to find the mean value with the 12 time step of 2969 value...
Now I want to do is, to find again the mean value of 2969 values(2970 to 5938) with time step of 12 and so on until 32768... so it happens 11 times in series...
So can anyone modify my VI??
Thank you,
Solved!
Go to Solution.
Attachments:
Moving average.vi ‏18 KB

please go through the attched VI
I made some correction in that.Now I am able to find the mean value for first 2969 rows with the overlapping time step of 12.
It means I am able to find the mean value from 1-12,2-13,3-14 ... 2958-2969...
but now the problem starts, I want to calculate the mean value of next 2969 rows which is 2970 to 5938 with the time step of 12...
So please modify my VI.. I stuck with the serious problem...
I have 32768 rows and have a partition of 2969 rows so the loop has to be repeat for 11 times.
hope you understand the prob
Thank you
Attachments:
Moving average.vi ‏19 KB

IPhone 4s looks shut down all the time.especially when the 3g is on.in the forums its said to push the use button and the power button at the same time.the people calling me cannot reach at my phone.what should i do ?

my phone looks like offline all the time.its all about me to notice that its offline.then i have to push the main button and the power button together to open it.then the apple sign comes on the screen and the phone turns online.but i cannot receive the information of who called me at the time that my iphone 4s turned offline by itself.i cannot receive messages at all.what can i do now ? i sent the phone to the service and they just told me that they installed the current version.but i guess nothing happened.its doing the same thing again.i cannot use my iphone.
From Turkiye.

I've tried all those.But nothing works.The phone seems to be shut down.But it is not.When i get it out of my pocket, for example to call someone, i touch to main button but nothing happens.I solve it by pushing the power button and the main button together just for a couple of seconds, as its said so in the forums.
also, people told me that they were calling me, my phone was ringing but i didnt answer?...i checked it for millions of times, it seems to be shut down, but its normally not.then i push the buttons together and the apple sign comes on the screen.it searches for the network.and it works.
but i do not see any calls, texts anything.but for the others, they say my phone seems to be workin.
I thought it was 'cause of the 3G is switched on but when I turn 3G off, it does the same thing.it seems to be offline all the time.

Connection dropping. Same time every day. Packet B...

Hi there, I am at the end of my tether trying to get assistance through the BT phone number. Here is the background.
I had a 2nd line added to my property in September 2013 to be a dedicated broadband line, no other phone ports were created other than the master socket. The BT Home Hub is connected to this master socket and I connect to it via WiFi upstairs. No telephone is used on the socket. The router is the small black one with the 3 blue lights that you see on the advert.
The connection has been fantastic up until 12th February when I reported Fault ref : VOL051-**********
At the moment that Fault ref has a graphic showing Broadband Problem at Location (1) BT Retail Servers.
I'm from an IT background and feel I understand a lot of what goes on, any questions, just ask me.
I am a Sports Trader and have dedicated software that has a Ping graphic, this means that at all times I can see that I have a stable connection (or not).
Overview : At 9:30pm every other day, my connection becomes unstable, the ping graphic flashes red showing that some pings to the server are taking in excess of 1000 milli seconds, when they are normally around 60ms.
Over the next 5 minutes, everything grinds to a halt.
I then moan for the next hour rebooting, restarting until things settle down to normal around 10:30pm.
During this hour, there are times where my router can't connect to broadband, there are other times where it claims its connected but the speed is akin to an old dialup.
I have disconnected anything wireless around the house over the last month, nothing is solving the problem.
I've looked in the Event Logs and I am convinced there is something far wrong internally. I will paste this below.
I also ran a tracert to google.co.uk during the problem time tonight, it took forever and I will also paste this below.
I had been out tonight so returned home and tried to start working at 22:07, my wife had been on the connection from a different laptop earlier.

22:55:12, 03 Mar.
(89315.170000) Admin login successful by 192.168.1.66 on HTTP
22:36:59, 03 Mar.
IN: BLOCK [16] Remote administration (ICMP type 8 code 0 217.32.142.102->86.130.199.115 on ppp0)
22:35:41, 03 Mar.
(88143.730000) CWMP: session completed successfully
22:35:41, 03 Mar.
(88143.290000) CWMP: HTTP authentication success from https://pbthdm.bt.mo
22:35:38, 03 Mar.
(88140.730000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
22:35:38, 03 Mar.
(88140.720000) CWMP: Session start now. Event code(s): '6 CONNECTION REQUEST,4 VALUE CHANGE'
22:35:36, 03 Mar.
(88138.380000) CWMP: Initializing transaction for event code 6 CONNECTION REQUEST
22:32:41, 03 Mar.
(87963.890000) Admin login successful by 192.168.1.66 on HTTP
22:32:03, 03 Mar.
(87925.220000) Lease for IP 192.168.1.66 renewed by host Ross (MAC c0:d9:62:04:0c:f4). Lease duration: 1440 min
22:32:03, 03 Mar.
(87925.220000) Device connected: Hostname: Ross IP: 192.168.1.66 MAC: c0:d9:62:04:0c:f4 Lease time: 1440 min. Link rate: 72.2 Mbps
22:32:03, 03 Mar.
(87925.210000) Lease requested
22:32:01, 03 Mar.
ath0: STA c0:d9:62:04:0c:f4 IEEE 802.11: Client associated
22:32:01, 03 Mar.
(87923.760000) Device disconnected: Hostname: Ross IP: 192.168.1.66 MAC: c0:d9:62:04:0c:f4
****** CONNECTION STARTS WORKING AND BTWHOLESALE SPEEDTEST PAGE LOADED ABOUT NOW *****
22:29:47, 03 Mar.
(87790.180000) CWMP: session completed successfully
22:29:45, 03 Mar.
(87787.920000) CWMP: HTTP authentication success from https://pbthdm.bt.mo
22:29:11, 03 Mar.
(87753.240000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
22:29:11, 03 Mar.
(87753.230000) CWMP: Session start now. Event code(s): '6 CONNECTION REQUEST,4 VALUE CHANGE'
22:29:07, 03 Mar.
(87749.540000) CWMP: Initializing transaction for event code 6 CONNECTION REQUEST
22:27:16, 03 Mar.
IN: BLOCK [5] Fragmented packet (TCP 173.194.34.159->86.130.199.115 fragment_offset=0)
22:26:18, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:50063->193.113.8.194:80 on ppp0)
22:26:18, 03 Mar.
BLOCKED 1 more packets (because of First packet is Invalid)
22:26:17, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:50063->193.113.8.194:80 on ppp0)
22:25:21, 03 Mar.
IN: BLOCK [5] Fragmented packet (TCP 173.194.34.159->86.130.199.115 fragment_offset=0)
22:25:03, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49968->46.19.168.101:443 on ppp0)
22:25:02, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49969->46.19.168.101:443 on ppp0)
22:25:00, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49964->46.19.168.101:443 on ppp0)
22:24:51, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:50027->46.19.168.101:443 on ppp0)
22:24:18, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49968->46.19.168.101:443 on ppp0)
22:24:17, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49969->46.19.168.101:443 on ppp0)
22:24:15, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49964->46.19.168.101:443 on ppp0)
22:24:08, 03 Mar.
IN: BLOCK [5] Fragmented packet (TCP 173.194.34.159->86.130.199.115 fragment_offset=0)
22:24:06, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:50027->46.19.168.101:443 on ppp0)
22:23:33, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49968->46.19.168.101:443 on ppp0)
22:23:32, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49969->46.19.168.101:443 on ppp0)
22:23:30, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49964->46.19.168.101:443 on ppp0)
22:23:21, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:50027->46.19.168.101:443 on ppp0)
22:23:04, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:50017->46.19.168.101:443 on ppp0)
22:22:50, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:50018->66.235.133.62:443 on ppp0)
22:22:48, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49968->46.19.168.101:443 on ppp0)
22:22:47, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49969->46.19.168.101:443 on ppp0)
22:22:45, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49964->46.19.168.101:443 on ppp0)
22:22:35, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:50027->46.19.168.101:443 on ppp0)
22:22:19, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:50017->46.19.168.101:443 on ppp0)
22:22:05, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:50018->66.235.133.62:443 on ppp0)
22:22:03, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49968->46.19.168.101:443 on ppp0)
22:22:02, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49969->46.19.168.101:443 on ppp0)
22:22:00, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49964->46.19.168.101:443 on ppp0)
22:21:40, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:50017->46.19.168.101:443 on ppp0)
22:21:29, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:50018->66.235.133.62:443 on ppp0)
22:21:19, 03 Mar.
BLOCKED 1 more packets (because of First packet is Invalid)
22:21:18, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49968->46.19.168.101:443 on ppp0)
22:21:17, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49969->46.19.168.101:443 on ppp0)
22:21:15, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49964->46.19.168.101:443 on ppp0)
22:21:00, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49968->46.19.168.101:443 on ppp0)
22:20:59, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49969->46.19.168.101:443 on ppp0)
22:20:58, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49964->46.19.168.101:443 on ppp0)
22:20:48, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:50011->46.19.168.101:443 on ppp0)
22:20:20, 03 Mar.
IN: BLOCK [5] Fragmented packet (TCP 173.194.34.151->86.130.199.115 fragment_offset=0)
22:19:38, 03 Mar.
IN: BLOCK [5] Fragmented packet (TCP 173.194.34.153->86.130.199.115 fragment_offset=0)
22:19:37, 03 Mar.
IN: BLOCK [5] Fragmented packet (IP 173.194.34.153->86.130.199.115 fragment_offset=1448)
22:18:09, 03 Mar.
(87091.420000) Admin login successful by 192.168.1.66 on HTTP
22:14:39, 03 Mar.
(86881.700000) Lease for IP 192.168.1.66 renewed by host Ross (MAC c0:d9:62:04:0c:f4). Lease duration: 1440 min
22:14:39, 03 Mar.
(86881.690000) Device connected: Hostname: Ross IP: 192.168.1.66 MAC: c0:d9:62:04:0c:f4 Lease time: 1440 min. Link rate: 130.0 Mbps
22:14:39, 03 Mar.
(86881.680000) Lease requested
22:14:39, 03 Mar.
ath0: STA c0:d9:62:04:0c:f4 IEEE 802.11: Client associated
22:14:39, 03 Mar.
ath0: STA c0:d9:62:04:0c:f4 IEEE 802.11: Client disassociated
22:12:30, 03 Mar.
BLOCKED 3 more packets (because of First packet is Invalid)
22:12:28, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:57381->90.216.129.135:8443 on ppp0)
22:12:26, 03 Mar.
BLOCKED 2 more packets (because of First packet is Invalid)
22:12:24, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:57378->90.216.129.135:8443 on ppp0)
22:12:24, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:57381->90.216.129.135:8443 on ppp0)
22:12:23, 03 Mar.
BLOCKED 2 more packets (because of First packet is Invalid)
22:12:22, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:57378->90.216.129.135:8443 on ppp0)
22:12:22, 03 Mar.
BLOCKED 3 more packets (because of First packet is Invalid)
22:12:21, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:57378->90.216.129.135:8443 on ppp0)
22:12:21, 03 Mar.
BLOCKED 11 more packets (because of First packet is Invalid)
22:12:20, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:57381->90.216.129.135:8443 on ppp0)
22:12:19, 03 Mar.
(86742.030000) Lease for IP 192.168.1.66 renewed by host Ross (MAC c0:d9:62:04:0c:f4). Lease duration: 1440 min
22:12:19, 03 Mar.
(86742.030000) Device connected: Hostname: Ross IP: 192.168.1.66 MAC: c0:d9:62:04:0c:f4 Lease time: 1440 min. Link rate: 52.0 Mbps
22:12:19, 03 Mar.
(86742.020000) Lease requested
22:12:19, 03 Mar.
ath0: STA c0:d9:62:04:0c:f4 IEEE 802.11: Client associated
22:08:40, 03 Mar.
(86523.200000) Lease for IP 192.168.1.67 expired. MAC: 74:46:a0:6f:fd:98, host name: HP6FFD98
22:07:07, 03 Mar.
(86429.310000) CWMP: session completed successfully
22:07:06, 03 Mar.
(86428.990000) CWMP: HTTP authentication success from https://pbthdm.bt.mo
22:07:02, 03 Mar.
(86424.730000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
22:07:02, 03 Mar.
(86424.720000) CWMP: Session start now. Event code(s): '2 PERIODIC,4 VALUE CHANGE'
22:07:00, 03 Mar.
(86422.900000) CWMP: Initializing transaction for event code 2 PERIODIC
**** I RETURN HOME NOW AND TRY TO START WORKING. NO PAGES WILL LOAD PROPERLY, DIALUP CONNECTION IT FELT LIKE
21:52:42, 03 Mar.
IN: BLOCK [16] Remote administration (TCP 218.77.79.34:51447->86.130.199.115:22 on ppp0)
21:25:12, 03 Mar.
IN: BLOCK [16] Remote administration (TCP 182.52.130.95:33686->86.130.199.115:80 on ppp0)
21:08:40, 03 Mar.
(82921.200000) NTP synchronization success!
20:52:19, 03 Mar.
IN: BLOCK [16] Remote administration (TCP 198.20.70.114:4183->86.130.199.115:80 on ppp0)
20:43:52, 03 Mar.
(81432.600000) Device disconnected: Hostname: Nelson2011-PC IP: 192.168.1.64 MAC: 00:22:5f:35:f4:80
tracert google.co.uk
Tracing route to google.co.uk [173.194.34.151]
over a maximum of 30 hops:
1     4 ms     2 ms     2 ms BThomehub.home [192.168.1.254]
2    20 ms    20 ms    21 ms 217.32.142.102
3    29 ms    94 ms    21 ms 217.32.142.126
4    27 ms    27 ms    27 ms 212.140.206.2
5    27 ms    27 ms    27 ms 31.55.165.169
6    28 ms    29 ms    27 ms 31.55.165.107
7    27 ms    26 ms    27 ms acc1-10GigE-7-3-0.mr.21cn-ipp.bt.net [109.159.25
0.98]
8     *        *        *     Request timed out.
9    34 ms    33 ms    33 ms peer1-xe2-0-0.telehouse.ukcore.bt.net [109.159.2
54.100]
10    34 ms    33 ms    33 ms 195.99.126.105
11    36 ms    34 ms    34 ms 209.85.252.188
12    45 ms    36 ms    35 ms 209.85.253.115
13    36 ms    35 ms    36 ms lhr14s21-in-f23.1e100.net [173.194.34.151]
Trace complete.

My ipod touch has the "white screen of death" and the thing where you press the home and power button at the same time dosent work. How do i fix it?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Odd problem using mini display cord and power cord at the same time

When i connect my mbp to a monitor/tv while running on ac the macbook freezes totally. As soon as i plug in the power cord while running an external monitor the cpu usage goes crazy. Kernal task reporting 100.1 % cpu usage and also high cpu usage (powered, syslogd and configd). The only way to unfreeze the macbook is to unplug the power cord. When i do this the laptop runs perfectly fine again while connected to my monitor.
The odd thing is that it was running totally fine a few hours ago. but after waking up my mac its showing this issue.
Would love to get feedback.
Thanks

I use a KVM switch with a Dell monitor that has DVI and VGA inputs. I only route the K an M portions (keyboard and mouse) through the switch. The computers connect directly via VGA and DVI to the Monitor, and then I use the monitor's switch to make the video switch. Works fine. Don't worry about taxing the monitor.
I'd suggest buying the KVM switch from a vendor with easy return policies, since it can take a few tries to find a model you like.

GT780DX FPS Drops for 10 seconds - power also drops for same time

Similar Messages

Maybe you are looking for