Guestnet -no authentication requested after a user reboots
On our guest wireless, at times when a user shuts down their laptop
and powers back up they are not asked to re-authenticate.
The only security is a login and password then the user is tunneled
to our 440 in our DMZ then out the internet pipe.
My question is if the user shuts the laptop off then starts it back up
shouldn't they be prompted for the user login and password?
I assume you are talking about webauth.
You don't want your user to re-webauth every time they roam, right?
So when your client shuts down its laptop, unless it told the AP it was disassociating, then the WLC still think he is a connected client.
When they reboot and connect again, as far as we're concerned the client just "roamed" somewhere else.....
The bottom line is that the Idle Timeout is what cleans up an entry that is no longer associated. By default this is 5 minutes (TYPO earlier), so if you reboot in less than 5 minutes, you'll get connected and stay authenticated. At which point, the total session timeout is the next authentication period..
So long story short, if you want a reboot to cause clients to fully authenticate again with webauth, you're going to either find a way to tell the client to disassociate properly... or you're going to have to drop your idle timeout to a number that will expire while a client is rebooting....
Make sense?
Similar Messages
-
SOAP URL requires authentication even after enclosing user and pw
Hi,
Currently i have generated a SOAP url and had provided it to the source system owners. All they say is that when they enter the URL in the Internet Explorer, it asked for the username and password again even after adding it to the URL. Also when they integrated it to their application, it throwed an error "Transport error: 401 Error: Unauthorized"
The URL i shared is in the below format,
https://<HostName>:<Port>/XISOAPAdapter/MessageServlet?channel=:<BusinessSystem>:<CommunicationChannel>&nosoap=true&sap-user=<username>&sap-password=<password>
Please help me if i am missing something in this.Hi,
In fact, what Mark mentioned is true. Let me throw some more light to it. You can only include the username and password in the SOAP call to PI if you post the SOAP message directly to the Integration Engine, without using sender SOAP adapter. This approach was described by Stefan Grube in his blog here:
Using the SOAP inbound channel of the Integration Engine
As a result, you would have to use a different URL to post your calls:
http://hostname:port/sap/xi/engine?type=entry&version=3.0&Sender.Service=<service>&Interface=<namespace>^<service_interface>&sap-user=<>user&sap-password=<password>
Alternatively (and this is how I would personally do it), you can include the username and password in the HTTP header attributes, as I described here:
A closer look at SOAP Sender authentication
Thanks to that, you do use the sender SOAP adapter, and achieve some more security thanks to not providing the user name and password in the URL.
Hope this helps,
Greg -
Not Authorized HTTP Error 401. The requested resource requires user authentication.
Hi All,
I have MDS web application on one server and MDS DB on another, both in same domain .
MDS web application is created as new website on same IIS with SharePoint and have their own port assign
In IIS Windows Authentication is added and enabled.
Users do have function permission and module enabled.
MDS is accessible only on server where web application is.
When it is accessed from any computer within domain error is
Not Authorized
HTTP Error 401. The requested resource requires user authentication.
Can anyone offer any suggestions?
Thanks
ZorkoHi Zorko,
The issue may happen in case:
1. The Master Data Service(MDS) web application is running under a domain user account
2. You didn't register a Service Principal Name(SPN) for the account
3. You are using fully qualified domain name(FQDN) or host name to access the MDS
4. You are able to access the MDS by IP address(http://<ip address>)
If I am right, it is because of the browser choose to use Kerberos authentication to connect to the MDS.
So then, to fix the issue, please:
Register SPN for the application pool account. Enable the delegation.
Or, please force the web site to use NTLM authentication only.
For more information, please see:
How to use SPNs when you configure Web applications that are hosted on Internet Information Services:
http://support.microsoft.com/kb/929650
Forcing NTLM Authentication (IIS 6.0):
http://www.microsoft.com/technet/prodtechnol/WindowsServer2003/Library/IIS/7258232a-5e16-4a83-b76e-11e07c3f2615.mspx?mfr=true
Thanks,
Jinchun Chen
Jinchun Chen(JC)
TechNet Community Support -
User authentication error after a successful authentication
Hi,
I have configured OAM 10g (10.1.4.3).It uses AD as the Directory server and OHS 11g (11.1.1.6) as the web server.
Created a policy domain with the resouce URL /test.Created an authentication scheme which has the plugins: credential_mapping, validatepassword and a custom plugin which is a ".dll" file.
So when i browse the URL http://IP:7777/test (Resource URL in policy domain), it redirects me to "/public/login.html" page which is the login page and resides in the web server. The login page consists of 3 fields: username, password and security code. This performs a 2 factor authentication. The first factor "username + password" is validated against AD, the second factor (username + security code) is validated against RADIUS, the custom plugin takes care of this.
When the user is redirected to "/public/login.html", i can see the cookies "obFormLoginCookie" and "ObssoCookie" in the browser (mozilla). These 2 cookies are present even before the user authentication.
User authentication works fine and user is redirected to a page which says "Authentication successful". This page doesn't have a logout button, you just have to close the page and login again.
The next time when the user browses the URL "http://IP:7777/test (resource URL in Policy domain), it ideally has to redirect to "/public/login.html" where you have the form, but it throws an error saying "Not Found.The requested URL /test isn't found". But when i directly access the login page "/public/login.html", it would give you the login page and when i enter the credentials, this time it says "Not Found.The requested URL /access/dummy.cgi isn't found.
/access/dummy.cgi" is the action URL present in the login page, the same is present in the authentication schemes.
But when i clear the cookies, and login again, this time the authentication would be successful. So, i will always have to clear the cookies and login, which i think isn't feasible. Is the above mentioned error message expected? I just Couldn't understand the behaviour of these cookies in this context.
Any ideas/suggestions would be really helpful to me.
Thanks.
Edited by: 886322 on Apr 12, 2012 4:11 AMTry to disable authorization and see if this error stops
-
We have a SharePoint Enterprise 2013 system at RTM level. We've installed Workflow Manager 1.0 by following the steps at
http://technet.microsoft.com/en-us/library/jj658588.aspx. For the final step of Validating the Installation we created a simple list-level workflow and verified that the workflow
is invoked successfully. This is working successfully, but only for a single user. If other users in the same site collection try to invoke the workflow on this same list we get the ULS Log Error:
Claims Authentication af3zp Unexpected STS Call Claims Saml: Problem getting output claims identity. Exception: 'Microsoft.SharePoint.SPException: The specified user or domain group was not found. --->
System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
followed by:
Failed to issue new security token. Exception: Microsoft.SharePoint.SPException: The specified user or domain group was not found. ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
(as details below).
All accounts that are attempting to use the Test Workflow (both working and non-working user accounts) are valid AD accounts and are included in the User Profile Sync that runs nightly. All have Contribute or Design permission level (and for testing,
Full Control).
What could cause the Claims Authentication to fail when certain users attempt to launch the workflow?
Thank you for your response.
Jim Mac.
08/29/2013 10:22:51.94 w3wp.exe (0x2020) 0x26D8 SharePoint Foundation
Claims Authentication af3zp Unexpected STS Call Claims Saml: Problem getting output claims identity. Exception: 'Microsoft.SharePoint.SPException: The specified user or domain group was
not found. ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType,
Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity,
SPClaim loginClaim) --- End of inner exception stack trace --- at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdent... 94aa5c2d-fa45-9b83-b203-a92b20102583
08/29/2013 10:22:51.94* w3wp.exe (0x2020) 0x26D8 SharePoint Foundation
Claims Authentication af3zp Unexpected ...ity, SPClaim loginClaim) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String
encodedIdentityClaimSuffix) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.CreateTokenCacheReferenceFromTokenSignature(SPRequestInfo requestInfo, IClaimsIdentity identity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentTokenCacheReferenceClaim(SPRequestInfo
requestInfo, IClaimsIdentity identity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentOutputIdentityForRequest(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetOutputClaimsIdentity(IClaimsPrincipal
principal, RequestSecurityToken request, Scope scope)'. 94aa5c2d-fa45-9b83-b203-a92b20102583
08/29/2013 10:22:51.94 w3wp.exe (0x2020) 0x26D8 SharePoint Foundation
Claims Authentication fo1t Monitorable STS Call: Failed to issue new security token. Exception: Microsoft.SharePoint.SPException: The specified user or domain group was not found. --->
System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
at System.Security.Principal.NTAccount.Translate(Type targetType) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim)
--- End of inner exception stack trace --- at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim logi... 94aa5c2d-fa45-9b83-b203-a92b20102583
08/29/2013 10:22:51.94* w3wp.exe (0x2020) 0x26D8 SharePoint Foundation
Claims Authentication fo1t Monitorable ...nClaim) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedIdentityClaimSuffix)
at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.CreateTokenCacheReferenceFromTokenSignature(SPRequestInfo requestInfo, IClaimsIdentity identity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentTokenCacheReferenceClaim(SPRequestInfo
requestInfo, IClaimsIdentity identity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentOutputIdentityForRequest(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetOutputClaimsIdentity(IClaimsPrincipal
principal, RequestSecurityToken request, Scope scope) at Microsoft.IdentityModel.Securi... 94aa5c2d-fa45-9b83-b203-a92b20102583
08/29/2013 10:22:51.94* w3wp.exe (0x2020) 0x26D8 SharePoint Foundation
Claims Authentication fo1t Monitorable ...tyTokenService.SecurityTokenService.Issue(IClaimsPrincipal principal, RequestSecurityToken request) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.Issue(IClaimsPrincipal
principal, RequestSecurityToken request) 94aa5c2d-fa45-9b83-b203-a92b20102583Hi Aries,
I am facing issue with work flow where Workflow goes to Suspend mode.
I am facing an issue with SP2013 Custom Workflow developed using Visual Studio 2012.
Objective of the Custom workflow: User fills the form and submit, list get updated and workflow will initiate and go for the process.
Issue: After the deployment of WF, for first time when user is filling the form and submit, list is getting updated. But the Workflow Goes to "Suspend" mode. (
This Custom Workflow has a configuration file where we are providing other details including ID of Impersonator (farm is running under Claim Based Authentication).
Work flow works fine once when the Impersonator initiate the workflow (Fill the form and submit for approval) and everything works fine after that.
Following steps are already performed
1.Make sure User profile synchronization is started.
2.Make sure the user is not the SharePoint system user.
3.Make sure the user by whom you are logged is available in User Profile list.
4.Step full synchronization of User Profile Application.
From the ULS logs it seems the user's security token from the STS service and User profile service is not being issued.
Appreciate any thoughts or solution.
Following are the log files.
<-------------------------------Information taken from "http://YYYY.XXXXX.com/sites/xxxx/_layouts/15/wrkstat.aspx" where it is showing workflow status as "Suspend"------->
http://yyyy.XXXX.com/sites/xxxx/_vti_bin/client.svc/sp.utilities.utility.ResolvePrincipalInCurrentcontext(input=@ParamUser,scopes='15',sources='15',inputIsEmailOnly='false',addToUserInfoList='False')?%40ParamUser='i%3A0%23.w%7CXXXXX%5Csps_biscomdev'
Correlation Id: f5bd8793-a53c-2127-bfb1-70bc172425e8 Instance Id: 14a985a0-60c8-42db-a42c-c752190b8106
RequestorId: f5bd8793-a53c-2127-0000-000000000000. Details: RequestorId: f5bd8793-a53c-2127-0000-000000000000. Details: An unhandled exception occurred during the execution of the workflow instance. Exception details: System.ApplicationException: HTTP 401
{"error_description":"The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug>
configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs."} {"x-ms-diagnostics":["3001000;reason=\"There
has been an error authenticating the request.\";category=\"invalid_client\""],"SPRequestGuid":["f5bd8793-a53c-2127-8654-672758a68234"],"request-id":["f5bd8793-a53c-2127-8654-672758a68234"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"SPRequestDuration":["34"],"SPIisLatency":["0"],"Server":["Microsoft-IIS\/7.5"],"WWW-Authenticate":["Bearer
realm=\"b14e1e0f-257f-42ec-a92d-377479e0ec8d\",client_id=\"00000003-0000-0ff1-ce00-000000000000\",trusted_issuers=\"00000005-0000-0000-c000-000000000000@*,[email protected]79e0ec8d\"","NTLM"],"X-Powered-By":["ASP.NET"],"MicrosoftSharePointTeamServices":["15.0.0.4420"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Date":["Fri, 10 Apr 2015 19:48:07 GMT"]} at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance
instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
ULS Log
04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation Authentication Authorization agb9s Medium OAuth request. IsAuthenticated=False, UserIdentityName=, ClaimsCount=0 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation Runtime ajd6k Verbose Value for isAnonymousAllowed is : False f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation Runtime ajd6l Verbose Value for checkAuthenticationCookie is : True f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly)). Execution Time=18.7574119057031 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.73 PowerShell.exe (0x29BC) 0x2B9C SharePoint Foundation General narq Verbose Releasing SPRequest with allocation Id {AF89E1D7-C47F-467B-8FD4-D7DC768820EE}
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly)). Parent No
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Application Authentication Pipeline). Parent Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Claims Authentication ah25l Medium SPJsonWebSecurityBaseTokenHandler: ValidateActorIsSelfIssuer! Issuer '00000005-0000-0000-c000-000000000000' is not self
issuer. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Getting Site Subscription Id). Parent [S2S] Getting token from STS and setting Thread Identity f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Getting Site Subscription Id). Execution Time=0.341314329055788 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Reading token from Cache using token signature). Parent [S2S] Getting token from STS and setting Thread
Identity f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.76 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General ajji6 High Unable to write SPDistributedCache call usage entry. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.76 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Reading token from Cache using token signature). Execution Time=7.5931438213516 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.76 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Application Authentication ajwpx Medium SPApplicationAuthenticationModule: Failed to build cache key for user f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.76 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Topology aeayb Medium SecurityTokenServiceSendRequest: RemoteAddress: 'http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc' Channel:
'Microsoft.IdentityModel.Protocols.WSTrust.IWSTrustChannelContract' Action: 'http://docs.oasis-open.org/ws-sx/ws-trust/200512/RST/Issue' MessageId: 'urn:uuid:fd5eba94-c39d-4667-89bd-089411c87f09' f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.77 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Topology aeax9 Medium SecurityTokenServiceReceiveRequest: LocalAddress: 'http://c1vspwfe01.vitas.com:32843/SecurityTokenServiceApplication/securitytoken.svc'
Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://docs.oasis-open.org/ws-sx/ws-trust/200512/RST/Issue' MessageId: 'urn:uuid:fd5eba94-c39d-4667-89bd-089411c87f09' f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.77 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (ExecuteSecurityTokenServiceOperationServer). Parent No f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Claims Authentication ah25l Medium SPJsonWebSecurityBaseTokenHandler: ValidateActorIsSelfIssuer! Issuer '00000005-0000-0000-c000-000000000000' is not self
issuer. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General narq Verbose Releasing SPRequest with allocation Id {F17590DF-49D9-439D-86BC-5AE6416BB765} f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8b Verbose Looking up site
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General narq Verbose Releasing SPRequest with allocation Id {3847D5A4-15C6-4AF9-B062-E22BB555DF4F} f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Portal Server User Profiles ae0s1 High Identity claims mapped to '0' user profiles. Claims: [nameid: '', nii: 'windows', upn: '', smtp: '', sip: ''], User Profiles: f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Portal Server User Profiles ae0sr Unexpected UserProfileException caught.. Exception Microsoft.Office.Server.Security.UserProfileNoUserFoundException: 3001002;reason=The
incoming identity is not mapped to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetSingleUserProfileFromClaimsList(UserProfileManager
upManager, IEnumerable`1 identityClaims) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.<>c__DisplayClass2.<GetMappedIdentityClaim>b__0() is thrown. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Portal Server User Profiles ae0su High The set of claims could not be mapped to a single user identity. Exception 3001002;reason=The incoming identity is not mapped
to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. has occured. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Claims Authentication ae0tc High The registered mappered failed to resolve to one identity claim. Exception: Microsoft.Office.Server.Security.UserProfileNoUserFoundException:
3001002;reason=The incoming identity is not mapped to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetSingleUserProfileFromClaimsList(UserProfileManager
upManager, IEnumerable`1 identityClaims) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.<>c__DisplayClass2.<GetMappedIdentityClaim>b__0() at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated
secureCode) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetMappedIdentityClaim(Uri context, IEnumerable`1 identityClaims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetClaimFromExternalMapper(Uri
contextUri, List`1 claims) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Claims Authentication af3zp Unexpected STS Call Claims Saml: Problem getting output claims identity. Exception: 'Microsoft.Office.Server.Security.UserProfileNoUserFoundException:
3001002;reason=The incoming identity is not mapped to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetSingleUserProfileFromClaimsList(UserProfileManager
upManager, IEnumerable`1 identityClaims) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.<>c__DisplayClass2.<GetMappedIdentityClaim>b__0() at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated
secureCode) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetMappedIdentityClaim(Uri context, IEnumerable`1 identityClaims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetClaimFromExternalMapper(Uri
contextUri, List`1 claims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.ResolveUserIdentityClaim(Uri contextUri, ClaimCollection inputClaims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetIdentityClaim(Uri
contextUri, ClaimCollection inputClaims, SPCallingIdentityType callerType) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetLogonIdentityClaim(SPRequestInfo requestInfo, IClaimsIdentity inputIdentity, IClaimsIdentity
outputIdentity, SPCallingIdentityType callerType) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.EnsureSharePointClaims(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity, SPCallingIdentityType callerType)
at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentOutputIdentityForRequest(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetOutputClaimsIdentity(IClaimsPrincipal
principal, RequestSecurityToken request, Scope scope)'. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Claims Authentication fo1t Monitorable STS Call: Failed to issue new security token. Exception: Microsoft.Office.Server.Security.UserProfileNoUserFoundException:
3001002;reason=The incoming identity is not mapped to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetSingleUserProfileFromClaimsList(UserProfileManager
upManager, IEnumerable`1 identityClaims) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.<>c__DisplayClass2.<GetMappedIdentityClaim>b__0() at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated
secureCode) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetMappedIdentityClaim(Uri context, IEnumerable`1 identityClaims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetClaimFromExternalMapper(Uri
contextUri, List`1 claims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.ResolveUserIdentityClaim(Uri contextUri, ClaimCollection inputClaims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetIdentityClaim(Uri
contextUri, ClaimCollection inputClaims, SPCallingIdentityType callerType) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetLogonIdentityClaim(SPRequestInfo requestInfo, IClaimsIdentity inputIdentity, IClaimsIdentity
outputIdentity, SPCallingIdentityType callerType) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.EnsureSharePointClaims(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity, SPCallingIdentityType callerType)
at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentOutputIdentityForRequest(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetOutputClaimsIdentity(IClaimsPrincipal
principal, RequestSecurityToken request, Scope scope) at Microsoft.IdentityModel.SecurityTokenService.SecurityTokenService.Issue(IClaimsPrincipal principal, RequestSecurityToken request) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.Issue(IClaimsPrincipal
principal, RequestSecurityToken request) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (ExecuteSecurityTokenServiceOperationServer). Execution Time=17.1551132895382 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Claims Authentication fsq7 High SPSecurityContext: Request for security token failed with exception: System.ServiceModel.FaultException: The server was
unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in
order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs. at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.ReadResponse(Message
response) at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst, RequestSecurityTokenResponse& rstr) at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken
rst) at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context, Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo, SPRequestSecurityTokenProperties properties) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Claims Authentication 8306 Critical An exception occurred when trying to issue security token: The server was unable to process the request due to an internal
error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to
the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Application Authentication Pipeline). Execution Time=52.3525336320678 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Application Authentication ajezs High SPApplicationAuthenticationModule: Error authenticating request, Error details { Header: {0}, Body: {1} }. Available
parameters: 3001000;reason="There has been an error authenticating the request.";category="invalid_client" {"error_description":"The server was unable to process the request due to an internal error. For more information
about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as
per the Microsoft .NET Framework SDK documentation and inspect the server trace logs."} . f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 8nca Medium Application error when access /sites/testrpa2/_vti_bin/client.svc, Error=The server was unable to process the request due to an internal
error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to
the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs. at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.ReadResponse(Message response) at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken
rst, RequestSecurityTokenResponse& rstr) at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst) at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context,
Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo, SPRequestSecurityTokenProperties properties) at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForApplicationAuthentication(Uri context,
SecurityToken onBehalfOf) at Microsoft.SharePoint.IdentityModel.SPApplicationAuthenticationModule.<>c__DisplayClass4.<GetLocallyIssuedToken>b__3() at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated
secureCode) at Microsoft.SharePoint.IdentityModel.SPApplicationAuthenticationModule.ConstructIClaimsPrincipalAndSetThreadIdentity(HttpApplication httpApplication, HttpContext httpContext, SPFederationAuthenticationModule fam)
at Microsoft.SharePoint.IdentityModel.SPApplicationAuthenticationModule.AuthenticateRequest(Object sender, EventArgs e) at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly)). Execution Time=62.2890618779761 f5bd8793-a53c-2127-8485-418c67f110f6
Regards
Sakti -
NPS: Event 6274 - Network Policy Server discarded the request for a user
Intermittently I will get desktop (wired) and laptop (wireless) computers experiencing issues with NPS (they drop off the network).
Some computers are affected more than others, although they are identical hardware and based on a standard image.
In the event log of the NPS servers I can see the following messages:
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 2/05/2014 8:47:58 a.m.
Event ID: 6274
Task Category: Network Policy Server
Level: Information
Keywords: Audit Failure
User: N/A
Computer: NT147.domain.local
Description:
Network Policy Server discarded the request for a user.Contact the Network Policy Server administrator for more information.User:
Security ID: NULL SID
Account Name: host/DPC0387.domain.local
Account Domain: DOMAIN
Fully Qualified Account Name: DOMAIN\DPC0387$Client Machine:
Security ID: NULL SID
Account Name: -
Fully Qualified Account Name: -
OS-Version: -
Called Station Identifier: 3c-xx-xx-xx-xx-xx
Calling Station Identifier: 00-xx-xx-xx-xx-xxNAS:
NAS IPv4 Address: 10.nnn.nnn.nnn
NAS IPv6 Address: -
NAS Identifier: ND246
NAS Port-Type: Ethernet
NAS Port: 71RADIUS Client:
Client Friendly Name: Network Device Management Subnet
Client IP Address: 10.nnn.nnn.nnnAuthentication Details:
Connection Request Policy Name: NAP 802.1X (Wired)
Network Policy Name: -
Authentication Provider: Windows
Authentication Server: NT147.domain.local
Authentication Type: -
EAP Type: -
Account Session Identifier: 384F322E317838316564303034313030306230666632
Reason Code: 1
Reason: An internal error occurred. Check the system event log for additional information.
How do I debug when an internal error occurs but there is nothing in the system event log? Where else can I look?
Here's the packet trace that matches the event log entry above:
No. Time Source Destination Protocol Length Time from request Info
1 0.000000 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Identity
2 2.470423 Universa_xx:xx:xx Nearest EAPOL 60 Start
3 2.472870 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Identity
4 2.539416 Universa_xx:xx:xx Nearest EAP 60 Response, Identity
5 2.544206 Universa_xx:xx:xx Nearest EAPOL 60 Start
6 2.548804 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Identity
7 2.550050 Universa_xx:xx:xx Nearest EAP 60 Response, Identity
8 2.552597 10.switch 10.NPS_Server RADIUS 254 Access-Request(1) (id=249, l=208)
9 2.556043 10.NPS_Server 10.switch RADIUS 136 0.003446000 Access-Challenge(11) (id=249, l=90)
10 2.565876 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Protected EAP (EAP-PEAP)
11 2.569472 10.switch 10.NPS_Server RADIUS 254 Access-Request(1) (id=250, l=208)
12 2.572566 10.NPS_Server 10.switch RADIUS 136 0.003094000 Access-Challenge(11) (id=250, l=90)
13 2.580254 Universa_xx:xx:xx Nearest TLSv1 123 Client Hello
14 2.586544 10.switch 10.NPS_Server RADIUS 361 Access-Request(1) (id=251, l=315)
15 4.564841 Universa_xx:xx:xx Nearest EAPOL 60 Start
16 4.568530 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Identity
17 4.569876 Universa_xx:xx:xx Nearest EAP 60 Response, Identity
18 4.582263 10.switch 10.NPS_Server RADIUS 254 Access-Request(1) (id=252, l=208)
19 4.586006 10.NPS_Server 10.switch RADIUS 136 0.003743000 Access-Challenge(11) (id=252, l=90)
20 4.591896 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Protected EAP (EAP-PEAP)
21 4.592692 Universa_xx:xx:xx Nearest TLSv1 123 Client Hello
22 4.599634 10.switch 10.NPS_Server RADIUS 361 Access-Request(1) (id=253, l=315)
23 4.600887 10.NPS_Server 10.switch IPv4 1518 Fragmented IP protocol (proto=UDP 17, off=0, ID=07db)
24 4.609920 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 1514 Server Hello, Certificate, Certificate Request, Server Hello Done
25 4.610516 Universa_xx:xx:xx Nearest EAP 60 Response, Protected EAP (EAP-PEAP)
26 4.617407 10.switch 10.NPS_Server RADIUS 262 Access-Request(1) (id=254, l=216)
27 4.618352 10.NPS_Server 10.switch RADIUS 288 0.000945000 Access-Challenge(11) (id=254, l=242)
28 4.623650 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 176 Server Hello, Certificate, Certificate Request, Server Hello Done
29 4.643316 Universa_xx:xx:xx Nearest TLSv1 361 Certificate, Client Key Exchange, Change Cipher Spec, Encrypted Handshake Message
30 4.649607 10.switch 10.NPS_Server RADIUS 601 Access-Request(1) (id=255, l=555)
31 4.656950 10.NPS_Server 10.switch RADIUS 199 0.007343000 Access-Challenge(11) (id=255, l=153)
32 4.662734 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 87 Change Cipher Spec, Encrypted Handshake Message
33 4.681106 Universa_xx:xx:xx Nearest EAP 60 Response, Protected EAP (EAP-PEAP)
34 4.788536 10.switch 10.NPS_Server RADIUS 262 Access-Request(1) (id=2, l=216)
35 4.789735 10.NPS_Server 10.switch RADIUS 173 0.001199000 Access-Challenge(11) (id=2, l=127)
36 4.795723 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 61 Application Data
37 4.796372 Universa_xx:xx:xx Nearest TLSv1 93 Application Data
38 4.802368 10.switch 10.NPS_Server RADIUS 331 Access-Request(1) (id=3, l=285)
39 4.803363 10.NPS_Server 10.switch RADIUS 189 0.000995000 Access-Challenge(11) (id=3, l=143)
40 4.808905 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 77 Application Data
41 4.809501 Universa_xx:xx:xx Nearest TLSv1 77 Application Data
42 4.817342 10.switch 10.NPS_Server RADIUS 315 Access-Request(1) (id=4, l=269)
43 4.822986 10.NPS_Server 10.switch RADIUS 189 0.005644000 Access-Challenge(11) (id=4, l=143)
44 4.828973 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 77 Application Data
45 4.833318 Universa_xx:xx:xx Nearest TLSv1 829 Application Data
46 4.840610 10.switch 10.NPS_Server RADIUS 1073 Access-Request(1) (id=5, l=1027)
47 4.845946 10.NPS_Server 10.switch RADIUS 189 0.005336000 Access-Challenge(11) (id=5, l=143)
48 4.850938 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 77 Application Data
49 4.907924 Universa_xx:xx:xx Nearest TLSv1 141 Application Data
50 4.913390 10.switch 10.NPS_Server RADIUS 379 Access-Request(1) (id=6, l=333)
51 4.917535 10.NPS_Server 10.switch RADIUS 221 0.004145000 Access-Challenge(11) (id=6, l=175)
52 4.922877 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 109 Application Data
53 4.923472 Universa_xx:xx:xx Nearest TLSv1 61 Application Data
54 4.930319 10.switch 10.NPS_Server RADIUS 299 Access-Request(1) (id=7, l=253)
55 4.937348 10.NPS_Server 10.switch RADIUS 381 0.007029000 Access-Challenge(11) (id=7, l=335)
56 4.942543 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 269 Application Data
57 4.944791 Universa_xx:xx:xx Nearest TLSv1 125 Application Data
58 4.951408 10.switch 10.NPS_Server RADIUS 363 Access-Request(1) (id=8, l=317)
59 4.954022 10.NPS_Server 10.switch RADIUS 355 0.002614000 Access-Accept(2) (id=8, l=309)
60 4.981482 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Success
61 32.590347 10.switch 10.NPS_Server RADIUS 361 Access-Request(1) (id=251, l=315)
62 62.592420 10.switch 10.NPS_Server RADIUS 361 Access-Request(1) (id=251, l=315)
63 92.595043 10.switch 10.NPS_Backup_Server RADIUS 361 Access-Request(1) (id=9, l=315)
64 122.597856 10.switch 10.NPS_Backup_Server RADIUS 361 Access-Request(1) (id=9, l=315)
65 152.600618 10.switch 10.NPS_Backup_Server RADIUS 361 Access-Request(1) (id=9, l=315)A belated thanks for your reply.
Our environment doesn't have NPS accounting configured so that was easy to rule out.
The mid-day drop outs have stopped after I added "set protocols dot1x authenticator no-mac-table-binding" to our Juniper switches (which prevents mac address aging from clearing the active dot1x client session).
I believe the above error message occurs because the RADIUS session ID is rejected / ignored because of some quirks in the RADIUS standard. At the start of a dot1x authentication request a RADIUS session ID is created. For whatever reason the
RADIUS/NAP server stops responding and the Juniper switch fails over to the backup RADIUS/NAP server configured. The session ID is kept (per RADIUS standard) but the backup RADIUS/NAP server doesn't know about the session, so this event: "Network
Policy Server discarded the request for a user." occurs.
It would be nice to see a clearer error message "Invalid RADIUS session" or similar.
There is a Microsoft guide on how to set up RADIUS/NAP servers in a highly available configuration - something to do with RADIUS proxy servers.
It would be even nicer to see some kind of RADIUS session synchronisation between NAP servers... if it doesn't already exist?
I am having the same exact issue you posted on here except I have Extreme Network switches. Some of my computers, various hardware, will randomly not authenticate during re-authentication. The switch says that it failed to contact the NPS server so then it
switches to my backup server. The client has a random time on how long it waits to authenticate so sometimes I end up having the disable/re-enable the port they are connected to so that the session is started again. I see that you basically removed the option
to force clients to re-authenticate Any downfall disabling that?. Any idea why the NPS server is no longer responding? Are you using Windows Server 2012? -
XP SP3 Never Responds to Migration Assistant Authentication Request
I've been using Macs for years and years and PCs for years and years before that. My parents have hung onto their XP machines as long as they (and I) could stand and it's now time to move them over to Mac. I remember the very painful days I spent migrating my Windows Outlook email and address book over to the Mac and swore I'd never go through that again. So when I heard Lion would have a Windows Migration Assistant that works with Outlook, I was nearly ecstatic. That was some days ago now and I now wish I'd just done the migration the old painful way because I'd be done by now.
I have two systems running Lion, one brand new Mini that came pre-installed with Lion and one brand new 17" MBP that came loaded with Snow Leopard but was immediately upgraded to Lion using the App store. I also have two Dell desktops running XP Pro SP3 that's fully up to date with Windows Update. I have exactly the same experience with Migration Assistant on both pairs of machines:
I download and installed Migration Assistant for Windows
I connect the Mac and the PC via an Ethernet cable
Both computers acknowledge that there's ethernet present.
The Mac can actually browse the XP machine's hard drive.
I run Migration Assistant on the Mac and take it up to the point that it's looking on the network for a computer to connect to.
I run Migration Assistant on the XP machine
The Mac now sees the XP machine in Migration Assistant
I select the XP machine and continue to the authentication step
The Mac spits out an authentication code
The XP machine appears to be waiting to hear from the Mac
Everybody waits for everyone else
Two hours go by
Nothing ever happens.
So, I tried a few things:
I rebooted everybody and that changed nothing.
I tried it over and over for two days and that changed nothing.
I tried reversing the order of steps 3 & 4 above, no difference in the outcome.
I tried connecting the two computers via USB, but they never saw each other.
I called Apple tech support. The first guy reviewed the steps with me and suggested very nicely that I call Microsoft (LOL). I asked him to escalate the case and he sent me to someone else who did actually seem to know what he was talking about. That person said I should give the XP machine up to 20 minutes to notice the authentication request from the Mac. That's why step 10 is in there above.
So if anyone has any suggestions, please let me know.Same issue here.
I want to migrate from a Windows XP SP3 too, but just to see if it depends on the operating system, I also tryed to migrate from another laptop with Windows 7 Pro and it fails in the same way.
Under a temp directory in Windows there's a SystemMigration.log with some details that may be useful to the support service. When the migration assistant starts on Windows it logs several activities related to user data scanning:
mercoledì 27 luglio 2011 13.33.39: The working directory is C:\Programmi\File comuni\Apple\Windows Migration Assistant
mercoledì 27 luglio 2011 13.33.39: The current OS version is Microsoft Windows NT 5.1.2600 Service Pack 3
mercoledì 27 luglio 2011 13.33.39: The current MA version is 1.0.0.32
mercoledì 27 luglio 2011 13.33.42: Bonjour version is 1180500
mercoledì 27 luglio 2011 13.33.42: SlingShot: Pipe name is: honPC_xqjjzcpxst
mercoledì 27 luglio 2011 13.33.42: SMBonjour: Published honPC_xqjjzcpxst on 10505
mercoledì 27 luglio 2011 13.33.43: Adding users...
mercoledì 27 luglio 2011 13.33.43: Adding administrator Administrator ()
mercoledì 27 luglio 2011 13.33.43: Adding administrator USER (C:\Documents and Settings\USER)
mercoledì 27 luglio 2011 13.33.43: Attempting fallback on ManagementObject exception: Non trovato
mercoledì 27 luglio 2011 13.33.43: WMI path: \\DANIELA\root\cimv2:Win32_SystemAccount.Domain="DANIELA",Name="INTERACTIVE"
mercoledì 27 luglio 2011 13.33.43: reg_reply: honPC_xqjjzcpxst: _smsling._tcp. on local. [0] 0000
mercoledì 27 luglio 2011 13.33.48: Failed to find SID for INTERACTIVE
mercoledì 27 luglio 2011 13.33.48: Attempting fallback on ManagementObject exception: Non trovato
mercoledì 27 luglio 2011 13.33.48: WMI path: \\DANIELA\root\cimv2:Win32_SystemAccount.Domain="DANIELA",Name="Authenticated Users"
mercoledì 27 luglio 2011 13.33.48: Failed to find SID for Authenticated Users
mercoledì 27 luglio 2011 13.33.48: Populating USER's FolderGrouping ( C:\Documents and Settings\USER\(album).Francesco.Renga-Orchestra.E.Voce.(by.@G@-AsTrA).2009 )
mercoledì 27 luglio 2011 13.33.48: Populating USER's FolderGrouping ( C:\Documents and Settings\USER\Graphisoft )
mercoledì 27 luglio 2011 13.33.48: Populating USER's FolderGrouping ( C:\Documents and Settings\USER\Mango )
Error messages come out when handshaking with Mac begin:
mercoledì 27 luglio 2011 13.36.18: *** CONTROL: Exception in ClientAuthorized:
System.IO.IOException: Authentication failed because the remote party has closed the transport stream.
at System.Net.Security.SslState.InternalEndProcessAuthentication(LazyAsyncResult lazyResult)
at System.Net.Security.SslState.EndProcessAuthentication(IAsyncResult result)
at System.Net.Security.SslStream.EndAuthenticateAsServer(IAsyncResult asyncResult)
at SMSlingShot.ServerSocket.ClientAuthorized(IAsyncResult result)
Last Win32 Error: 997
mercoledì 27 luglio 2011 13.36.18: SlingShot: returning to initial state
mercoledì 27 luglio 2011 13.36.18: SMBonjour: Published honPC_xqjjzcpxst on 10505
mercoledì 27 luglio 2011 13.36.18: reg_reply: honPC_xqjjzcpxst: _smsling._tcp. on local. [0] 0000
mercoledì 27 luglio 2011 13.36.20: *** CONTROL: Exception in ClientAuthorized:
System.IO.IOException: Authentication failed because the remote party has closed the transport stream.
at System.Net.Security.SslState.InternalEndProcessAuthentication(LazyAsyncResult lazyResult)
at System.Net.Security.SslState.EndProcessAuthentication(IAsyncResult result)
at System.Net.Security.SslStream.EndAuthenticateAsServer(IAsyncResult asyncResult)
at SMSlingShot.ServerSocket.ClientAuthorized(IAsyncResult result)
Last Win32 Error: 997
mercoledì 27 luglio 2011 13.36.20: SlingShot: returning to initial state
mercoledì 27 luglio 2011 13.36.20: SMBonjour: Published honPC_xqjjzcpxst on 10505
mercoledì 27 luglio 2011 13.36.20: reg_reply: honPC_xqjjzcpxst: _smsling._tcp. on local. [0] 0000
mercoledì 27 luglio 2011 13.36.22: *** CONTROL: Exception in ClientAuthorized:
The sequence continues over and over until Migration Assistant on the Mac is open trying to authenticate.
Hope someone could help. -
HI
we have a sharepoint farm and in domain controller server, this error is in event viewer
Log Name: System
Source: Microsoft-Windows-Kerberos-Key-Distribution-Center
Date: 9/15/2014 10:44:15 PM
Event ID: 11
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: XXXAPP01.xxxportal.com
Description:
The KDC encountered duplicate names while processing a Kerberos authentication request. The duplicate name is HTTP/XXXWFE01.xxxportal.com (of type DS_SERVICE_PRINCIPAL_NAME). This may result in authentication failures or downgrades to NTLM. In order to prevent
this from occuring remove the duplicate entries for HTTP/XXXWFE01.xxxportal.com in Active Directory.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kerberos-Key-Distribution-Center" Guid="{3FD9DA1A-5A54-46C5-9A26-9BD7C0685056}" EventSourceName="KDC" />
<EventID Qualifiers="49152">11</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-09-15T19:44:15.000000000Z" />
<EventRecordID>131824</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>XXXAPP01.xxxportal.com</Computer>
<Security />
</System>
<EventData>
<Data Name="Name">HTTP/XXXWFE01.xxxportal.com</Data>
<Data Name="Type">DS_SERVICE_PRINCIPAL_NAME</Data>
<Binary>
</Binary>
</EventData>
</Event>
adilHi adil,
Service principal names (SPNs) are stored as a property of the associated account object in Active Directory
Domain Services (AD DS). I noticed that you have used setpn –X to identify the duplicate SPN. Please refer to following articles and check if help you to solve this issue.
Event ID 11 — Service Principal
Name Configuration
Event ID 11 in the System log of domain controllers
Please also refer to following article and check if can help you.
The problem with duplicate SPNs
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu -
Hello,
I am having issues creating report datasource in "Windows authentication (integrated) or SharePoint user" in SharePoint 2013. I followed the steps mentioned in the link http://blogs.msdn.com/b/psssql/archive/2014/04/28/sharepoint-adventures-using-claims-with-reporting-services.aspx.
I am just stuck in the delegation piece here. I have a SSAS instance by name "XXXXAPPV01\Multidimensional". First thing is what is the procedure to set SPN for this instance? I need to add this service in the delegation tab so that C2WTS service
configured correctly.
Nothing but I should be able to access my SSAS 2012 cube from SSRS 2012 by "Windows authentication (integrated) or SharePoint user" as the authentication method.
PalashI used the below command to set SPN for analysis services.
setspn -S MSOLAPSvc.3/XXXXAPPV01APPV01.xxxxdmo.local:Multidimensional xxxxdmo\svcMyService
After setting the SPN for this service account I added this account(xxxxdmo\svcMyService) in the delegation tab of my domain account created earlier for claim service (xxxxdmo\svcC2WTS). Now in service type it shows -> MSOLAPSvc.3, User or Computer it shows
-> XXXXAPPV01APPV01.xxxxdmo.local and in Port it shows -> Multidimensional. This is in my svcC2WTS account delegation tab. Still I am not able to connect datasource by "Windows authentication(integrated) or SharePoint User". I am getting the
same error "Cannot convert claims identity to windows token".
I am not sure what am I missing in this configuration piece yet to get this working.
Palash -
Forms server failing after the first reboot.
Recently installed R12 on XP and was able to add users and responsibilities. after my first reboot of xp i was able to login but not able to start form server. Have tried reinstalling j2se and created mesg folder under forms folder as indicated in one of the post. still getting the error. the log file contents are included below:
09/03/31 10:40:36.734 10.1.3.0.0 Started
09/03/31 10:40:48.515 formsweb: FormsServlet init():
configFileName: D:\oracle\TST\inst\apps\TST_tpad60\ora/10.1.2/forms/server/appsweb.cfg
testMode: false
09/03/31 10:40:48.843 formsweb: 10.1.3.0.0 Started
09/03/31 11:09:29.609 formsweb: ListenerServlet init()
09/03/31 11:09:39.656 formsweb: Forms session <1> failed during startup: no response from runtime process
09/03/31 11:09:39.671 formsweb: Forms session <1> exception stack trace:
oracle.forms.engine.RunformException: Forms session <1> failed during startup: no response from runtime process
at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:719)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
09/03/31 11:17:20.625 formsweb: Servlet error
java.io.IOException: An established connection was aborted by the software in your host machine
at sun.nio.ch.SocketDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:33)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:302)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:306)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
09/03/31 11:17:28.859 formsweb: Forms session <2> failed during startup: no response from runtime process
09/03/31 11:17:28.859 formsweb: Forms session <2> exception stack trace:
oracle.forms.engine.RunformException: Forms session <2> failed during startup: no response from runtime process
at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:719)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
09/03/31 11:22:41.531 formsweb: Forms session <3> failed during startup: no response from runtime process
09/03/31 11:22:41.531 formsweb: Forms session <3> exception stack trace:
oracle.forms.engine.RunformException: Forms session <3> failed during startup: no response from runtime process
at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:719)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
09/03/31 11:24:17.234 formsweb: 10.1.3.0.0 Stopped
09/03/31 11:27:38.93 10.1.3.0.0 Started
09/03/31 11:27:52.750 formsweb: FormsServlet init():
configFileName: D:\oracle\TST\inst\apps\TST_tpad60\ora/10.1.2/forms/server/appsweb.cfg
testMode: false
09/03/31 11:27:53.31 formsweb: 10.1.3.0.0 Started
09/03/31 11:38:09.62 formsweb: ListenerServlet init()
09/03/31 11:38:13.250 formsweb: Forms session <1> failed during startup: no response from runtime process
09/03/31 11:38:13.250 formsweb: Forms session <1> exception stack trace:
oracle.forms.engine.RunformException: Forms session <1> failed during startup: no response from runtime process
at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:719)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
any help?
Thanks,Hi,
Though XP is not certified, R12 should work on it (I already have R12 running on XP Professional).
Linux should be more stable. Refer to the following document for details about R12 installation on Linux.
Note: 402310.1 - Oracle Applications Installation and Upgrade Notes Release 12 (12.0) for Linux (32-bit)
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=402310.1
Note: 416305.1 - Oracle Applications Installation and Upgrade Notes Release 12 (12.0) for Linux (64-bit)
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=416305.1
Regards,
Hussein -
Request aborted by user calling an Oracle Web Service
Hi
I'm using JDeveloper 10.1.2 to create my web services and web service stubs. I have a web application that uses the web service stubs to call the Business Logic that is exposed as Web Services. I'm getting the following intermittent error:
IOException: Request aborted by user
Something is happening with the Web Service stub. After checking google I found out that the only class that throws this error is tHTTPClient.HTTPConnection class from the httpclient library.
Can this be a timeout error?It look likes every stub you create with Oracle JDeveloper is not thread safe. This is really strange since OracleSOAPConnection uses HTTPClient and HTTPClient is thread safe.
-
On SAP e-commerce, How customer can request their forgotten user name.
On SAP e-commerce, How customer can request their forgotten user name or password.
In the Admin go to Setup - Config Settings - Membership(dropdown)
The settings for this and all other user authentication are here -
SP 2010-After adding user from IIS is not found in central admin
Hi Experts,
I am trying to configure my SP 2010 with Form Based Authentication.
After configuring WebSite, STS and Central Admin I added the user from IIS , But not able to found from central admin in Form Authentication.
I checked in database the user is added.
I followed the below blog .
http://jasear.wordpress.com/2012/03/16/sharepoint-2010-setting-up-form-based-authentication-fba-using-asp-net-sql-membership-provider/
Can experts help me how to get the added user to central admin.
Thanks
AshisKI was finally able to get the FBA working. After many failed attempts, I knew there was a configuration issue which was causing the error.
I provided connection string and provider details at 4 places, instead of the 3 mentioned in various blogs around ->
1. Sharepoint Central Admin
2. Sharepoint Web Services
3. SecurityTokenServiceApplication
4. And finally the web application itself.
The connection string for 2nd and 3rd will remain same however, provider details need to be added.
After completing this step, I was able to login using Form Based Authentication without an issue.
AshisK -
How to kill the session after the user exit the ADF application
Dear all
I have a problem
The problem is the session still exist after the user close the application and the browser. I want to kill all sessions that is not active.
This is my test scenario:
1- I open IE and run my ADF application that is deployed on weblogic. http://192.168.100.17:7001/myapp/faces/login
2- At the same time I issue this SQL command to view the sessions for user 'ADFUSER' - the "ADFUSER" is the schema user.
SELECT USERNAME,STATUS FROM v$session
WHERE USERNAME = 'ADFUSER';QUERY RESULT IS
USERNAME MODULE STATUS
ADFUSER JDBC Thin Client INACTIVE3- Now the user close the browser
4- Run the SQL again and I notice that the session still exist
SELECT USERNAME,STATUS FROM v$session
WHERE USERNAME = 'ADFUSER'RESULT:
USERNAME MODULE STATUS
ADFUSER JDBC Thin Client INACTIVE5- now the user open the URL again http://192.168.100.17:7001/myapp/faces/login
6-Run the SQL again , and I notice that the old session still exists and a new session created too.
SELECT USERNAME,STATUS FROM v$session
WHERE USERNAME = 'ADFUSER'RESULT:
USERNAME MODULE STATUS
ADFUSER JDBC Thin Client INACTIVE
ADFUSER JDBC Thin Client INACTIVE
2 rows selected.and every time I login to the application , a new session is open and the old session still exist
I do not know why this happens
I want to kill old session when the user close the application.
These sessions are cleared only when i restart the weblogic domain.
here is some information about my development environment:
Jdeveloper 11.1.2.3
WebLogic Server Version: 10.3.5.0
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
thanks in advanceHi,
for performance reasons you should not use dedicated user connections to the database. Instead you use JDBC data sources (default in JDeveloper for ADF BC) that you can configure the database connection pooling for. This means that your v$session will always show a set of active session, which however are shared among users. Assuming you use ADF BC, this is what happens
- A user requests a data bound page
- The ADF BC checks out an AM and connects to the database using one of the database connections in the pool
... user work here ...
- user exits application
- ADF BC returns AM to pool and passivates pending user state (if application is left with dirty transaction)
- Database connection is available in pool as soon as AM released
This also happens between requests. Long story cut short: v$session doesn't give you a true picture
Frank -
MOSS 2007; Manage Content & Structure = timeout & authentication request = 401
Hi,
I am having from time to time some issues with an older MOSS 2007 environment. Sometimes browsing to manage Content & Structure ends up in a long thinking process which ends with an authentication request. A Timeout seems to happen. Whatever a user enters...
it ends ip in a 401 error. That does not happen every time, but sometimes. The rest of Sharepoint works well.
Let me first describe the environment. The environment is fully virtualized. The content db is huge - the approx size is about 1 TB. There is only 1 site collection and quite a huge site structure.
The environment as such
2 WFE
1 IDX
1 SQL 2005 Cluster
We use Kerberos for authentication.
The w3wp processes grow to about 1-2 GB.
We have identified that when SQL Cluster fails from one node to the other.. this symptom disappears for a while. I have no clue what this can have to do with the described effects.
An IISRESET on all servers sometimes helps, too.
We cannot identify any errors, but the issue is really annoying.
Any thoughts?Hi Sven,
I am trying to involve someone familiar with this topic to further look at this issue.
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support
Maybe you are looking for
-
No disk in tray error and general frustratio
Hello all, Ive went thru the FAQs in this section and tried a clean install and everything on my Audigy 2 Gamer Edition. My problem is, none of the included diagnostic software works anymore. Speaker settings, Creative Diagnostics, Graphic Equalizer
-
Business Rules Error when Decision Function surfaced as WebService in BPM
To use a BusinessRule as from a Business Rules activity,it needs to be surfaced as a WebService. I've run into an issue where as soon as I check that box and save, the BusinessRule in question goes into a error mode when viewed from the BPM Project M
-
Pasting files into Illustrator
Hi, I am running Illustrator CS 11.0.0 on a MacBook Pro OS 10.6.7. I am suddenly having problems copying and pasting files from some graphic applications (DeltaGraph and Prism) into an open Illustrator file. I used to be able to do this easily. Is th
-
I have this exact problem with my MSI personal Cinema FX 5200. Found this question and answer from FAQ but the link in answer leads to nothing. So could someone PLEASE tell me the real address or driver to download?? Question: After installing Nvidia
-
Characteristic Derivation in Profitability Analysis
Dear Experts, I am finding it bit difficult to understand the concept fully when it comes to the Characteristic Derivation in Profitability Analysis. I had gone through the various SAP explanations of MOVE, LOOK UP, ENHANCEMENT, DERIVATION RULEu2026.