Guide to install Oracle 11gr2 on solaris 10 wiht SAN storage

Hey expert,
Anyone install Oracle 11g2 RAC on solaris 10 with SAN storage before. Any link and proper document that i can follow. Appreacite you guy can assist me.
Regard
liang
Edited by: 816734 on Sep 15, 2011 2:32 AM

Please check the following link :
http://www.oracle.com/pls/db112/portal.portal_db?selected=11&frame=#solaris_installation_guides
Anytime!

Similar Messages

Install Oracle 11gr2 on Windows 2008 R2 with ASM step by step Guide needed

Hi,
I am looking for a step by step guide on installing Oracle 11gr2 on Windows 2008 R2 with ASM etc. This is not a RAC environment since ASM architecture is a bit different in 11gR2, I would appreciate if anyone can point me to a guide to follow or provide a one.
Thanks in advance.
Sujith

Hi Sujith;
I am looking for a step by step guide on installing Oracle 11gr2 on Windows 2008 R2 with ASM etc. This is not a RAC environment since ASM architecture is a bit different in 11gR2, I would appreciate if anyone can point me to a guide to follow or provide a one.You need to install grid first(Software only) its neccessary for ASM, Than you need to use asmca to create asm disks than you need to install 11gr2
All doc avaliable at:
http://www.oracle.com/pls/db112/homepage
Regard
Helios

Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto

h2. Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto
Version: B
Author: Dude, 24. May 2011
The following are step by step instructions how to install Oracle 11gR2 Express Edition (Beta) under Linux Ubuntu 11.04, 64-bit.
Access to the Internet is required.
The instructions cover the following additional topics:
- Converting Red Hat based Oracle XE installer to Ubuntu.
- Work-around for missing /sbin/chkconfig tool.
- Install Oracle XE into a different directory or disk volume.
- Relocate and configure the Oracle user and default login directory.
- Uninstall, reconfigure and perform first database backup.
- Notes and web links.
- Troubleshooting
h3. A) System Setup and Prerequisites
h4. A.1. System Access
You will need terminal command line, root and system console access to perform the setup tasks.
To open a Terminal at the system console:
Menu Applications > Accessories > TerminalThe following commands will enable remote ssh login with root access:
sudo apt-get install openssh-server
sudo passwd root
Verify:
ssh root@xe_server_host_nameh4. A.2. Software Prerequisites
The following is required in order to install Oracle 11gR2 XE:
sudo apt-get install alien libaio1 unixodbcThe following is not required, but it will fix backspace and arrow keys in case you prefer using the vi-editor:
sudo apt-get install vimh4. A.3. System Swap space
Minimum swap space required is 2 GB. You can increase swap space if necessary using a swap file:
To analyze current swap space and memory configuration:
sudo cat /proc/meminfo
To install a 1 GB swapfile named swapfile in /, for example:
sudo dd if=/dev/zero of=/swapfile bs=1024 count=1048576
(this may take a while)
sudo mkswap /swapfile
sudo swapon /swapfile
sudo cp /etc/fstab /etc/fstab.orig
sudo echo '/swapfile swap swap defaults 0 0' >> /etc/fstab
Verify:
sudo swapon -a
sudo swapon -sh4. A.4. Kernel Parameters
Oracle 11g XE requires the following additional kernel parameters:
sudo nano /etc/sysctl.d/60-oracle.conf
(Enter the following)
# Oracle 11g XE kernel parameters
fs.file-max=6815744
net.ipv4.ip_local_port_range=9000 65000
kernel.sem=250 32000 100 128
kernel.shmmax=536870912
(Save the file)
Note: kernel.shmmax = max possible value, e.g. size of physical RAM.
Verify: sudo cat /etc/sysctl.d/60-oracle.conf
Load new kernel parameters:
sudo service procps start
Verify:
sudo sysctl -q fs.file-max
-> fs.file-max = 6815744h4. A.5. Oracle Installation Directory
The current Oracle Installation Guide uses the same directory like in previous versions: /usr/lib/oracle/xe/app/oracle/product/11.2.0/server. However, the current Beta installation uses Oracle Flexible Architecture (OFA) and installs into /u01/app/oracle/product/11.2.0/xe. Due to size limitations of Oracle XE it may not be necessary to store the installation to a specific directory or separate volume, but it is possible:
Install Oracle XE to separate disk volume:
From the system console menu: System > Administration > Disk Utility
Select "ext3" filesystem for Oracle compatibility and specify a Volume label, e.g. Oracle.
Notice the device name e.g. /dev/sdb
Get the drive UUID:
sudo blkid
e.g. /dev/sdb: UUID="d19a2d8f-da43-4802-8bdb-0703c855e23a"
Modify /etc/fstab to automatically mount the volume at system startup:
sudo cp /etc/fstab /etc/fstab.original
sudo nano /etc/fstab
(Add the following, using determined UUID, for exmple)
UUID=d19a2d8f-da43-4802-8bdb-0703c855e23a /u01 ext3 defaults,errors=remount-ro 0 1
(Save the file)
Create the mount-point, mount the new volume and set ownership and privileges:
sudo mkdir /u01
sudo mount -a
sudo chown root:root /u01
sudo chmod 755 /u01
Verify:
df -h
or restart the systemYou can also install Oracle XE into a specific directory:
Create a symbolic link to store the installation into an existing directory, for instance:
sudo mkdir /home/oracle-xe
sudo ln -s /home/oracle-xe /u01h3. C) Oracle 11g XE Download and Installation
h4. C.1. Download and convert the Installer from Red Hat to Ubuntu
Please see section E.3. to download the Oracle 11gR2 XE installer.
Select the version listed for Linux x64.
sudo unzip linux.x64_11gR2_OracleXE.zip
sudo alien --to-deb --scripts oracle-xe-11.2.0-0.5.x86_64.rpm
(This may take a while)h4. C.2. Create a special chkconfig script
The Red Hat based installer of Oracle XE 11gR2 beta relies on +/sbin/chkconfig+, which is not used in Ubuntu. The chkconfig package available for the current version of Ubuntu produces errors and my not be safe to use. Below is a simple trick to get around the problem and install Oracle XE successfully:
Create /sbin/chconfig:
sudo nano /sbin/chkconfig
(Cut and paste the following)
#!/bin/bash
# Oracle 11gR2 XE installer chkconfig hack for Debian by Dude
file=/etc/init.d/oracle-xe
if [[ ! `tail -n1 $file | grep INIT` ]]; then
   echo >> $file
   echo '### BEGIN INIT INFO' >> $file
   echo '# Provides:             OracleXE' >> $file
   echo '# Required-Start:       $remote_fs $syslog' >> $file
   echo '# Required-Stop:        $remote_fs $syslog' >> $file
   echo '# Default-Start:        2 3 4 5' >> $file
   echo '# Default-Stop:         0 1 6' >> $file
   echo '# Short-Description:    Oracle 11g Express Edition' >> $file
   echo '### END INIT INFO' >> $file
fi
update-rc.d oracle-xe defaults 80 01
(Save the file)
Set appropriate execute privileges:
chmod 755 /sbin/chkconfig
Note: You should remove the /sbin/chkconfig file after successful installation of Oracle XE.
h4. C.3. Install and configure Oracle XE
sudo dpkg --install ./oracle-xe_11.2.0-1.5_amd64.deb
/etc/init.d/oracle-xe configure
(This will take a while)
Remove the /sbin/chkconfig script, which is no longer needed.
sudo rm /sbin/chkconfigh4. C.4. Relocate and Configure the Oracle user login
The Oracle XE installer specifies /u01/app/oracle as the login directory for the Oracle user. Although not really necessary, the following will relocate the Oracle user $HOME to a standard location and create standard /etc/skel login files:
Exit all Oracle user sessions:
sudo /etc/init.d/oracle-xe stop
sudo kill -9 `ps -ef | grep oracle | grep -v grep | awk '{print $2}'`
sudo userdel oracle
sudo useradd -s /bin/bash -G dba -g dba -m oracle
sudo passwd oracle
Verify:
sudo id oracle
-> uid=1001(oracle) gid=1001(dba) groups=1001(dba)h4. C.5. Setup Oracle environment variables
In order to use sqlplus and other tools, the Oracle account requires certain environment variables. The following will set these variables automatically at every interactive Oracle login:
sudo echo '. /u01/app/oracle/product/11.2.0/xe/bin/oracle_env.sh' >> /home/oracle/.bashrch4. C.6. Oracle sudo root access
It is not essential to allow the Oracle user to use sudo, but it is convenient:
usermod -G admin oracle
Verify:
id oracle
-> uid=1001(oracle) gid=1001(dba) groups=1001(dba),120(admin)
sudo su -
-> Enter Oracle account passwordh4. C.7. Oracle 11g XE Post-installation
After you install Oracle Database XE, its graphical user interface is only available from the local server, but not remotely.
The following will correct the problem if necessary:
Login as user Oracle or use:
su - oracle
sqlplus / as sysdba
At the SQL prompt, enter the following command:
EXEC DBMS_XDB.SETLISTENERLOCALACCESS(FALSE);
exith3. D) Unintstall, Reconfigure and Troubleshooting
h4. D.1. Uninstall Oracle 11g XE
The following will completely uninstall and remove Oracle 11g XE:
Login as user root:
sudo su -
/etc/init.d/oracle-xe stop
dpkg --purge oracle-xe
rm -r /u01/app
rm /etc/default/oracle-xe
update-rc.d -f oracle-xe removeh4. D.2. Reconfigure Oracle 11g XE
Type the following in a terminal window:
/etc/init.d/oracle-xe stop
sudo rm /etc/default/oracle-xe
/etc/init.d/oracle-xe configureh4. D.3. Enable Archivelog mode and perform a database backup
Login as user Oracle:
su - oracle
sqlplus / as sysdba
At the SQL prompt, enter the following commands:
shutdown immediate
startup mount
alter database archivelog;
alter database open;
exit
Login to system console of the Oracle user account:
Select Applications > Oracle Database 11g Express Edition > Backup Databaseh3. E) Notes
h4. E.1. Oracle 11g XE limitiations overview
- It will consume, at most, processing resources equivalent to one CPU.
- Only one installation of Oracle Database XE can be performed on a single computer.
- The maximum amount of user data in an Oracle Database XE database cannot exceed 11 GB.
- The maximum amount of RAM that Oracle XE uses cannot exceed 1 GB, even if more is available.
- HTTPS is not supported natively with the HTTP listener built into Oracle Database XE.
h4. E.2. Documentation and Links
Official documentation for Oracle 11gR2 XE can be found at:
http://www.oracle.com/pls/xe112/homepage
h4. E.3. Oracle 11g XE downloads
The Installer is available from the Oracle Technology Network at:
http://www.oracle.com/technology/products/database/xe
http://www.oracle.com/technetwork/database/express-edition/downloads/index.html
h4. E.4 APEX links and archives
The APEX archives can be found at:
http://www.oracle.com/technetwork/developer-tools/apex/application-express/all-archives-099381.html
The APEX download site is:
http://www.oracle.com/technetwork/developer-tools/apex/downloads/index.html
h3. F) Troubleshooting
... in progress
Regards and best of luck!
Edited by: Dude on May 25, Version B: various corrections. chkconfig package (A.2.) not required.

even though I am admin user.Admin user is a MS Windows term, that does not apply to Linux or Unix in the same fashion.
The configuration script tells you "You must be root user to run the configure script. Login as root user and
then run the configure script."
This is most likely correct because your account is not root and does not have UID 0. What you can do is to login as root e.g. sudo su -, as the message suggest, or use "sudo /etc/init.d/oracle-xe configure", provided your account is defined in the /etc/sudoers file to perform root/admin actions.
Btw, do not modify /etc/passwd and /etc/group to give you admin privileges or try to create a another root account under a different name. That's not the way it works and usually leads to nasty problems.

How to install Oracle 10g on Solaris 10 non-global zone.

Hi,
I want to install Oracle 10g on Solaris non global zone with ASM.
I need complete doc for doing the same.
REgards
S.Ali

Check Oracle® Database Installation Guide 10g Release 2 (10.2) for Solaris Operating System.

Error while installing Oracle 10g on Solaris 10.

Hi all,
I am trying to install Oracle 10g on Solaris 10 (x86). I did every thing that is given in the Installation manual
created user,group and directories. set all the env variables.
executing the runinstaller it throws error
error in writing to directory /tmp/OraInstall2009-04-06_07-14-09PM.please ensure that this directory is writable and has atleast 69MB of disk space.Installation Cannot continue.+
*:Error 0*
I have given recursive a+rwx permission to /tmp folder and /tmp has 3.2 GB free space. am i missing some thing??
I am very new to Solaris and Oracle;Please help me with this.
Thanks.
Regards
Akhilesh Bhale

Check also if the t-bit is set:
[root@vtl1g121 ~]# ls -dl /tmp
drwxrwxrwt 11 root root 4096 Apr 10 11:44 /tmp
This is needed to mark the filesystem/directory as temporary.
Sometimes this can cause such problems also
Command: chmod +t /tmp

Install Oracle 8i on solaris

Hi
I know that we can install Oracle 8i on Solaris 8.
Can we install oracle 8i on Solaris 10 ?
What is the last solaris version that supports installation of Oracle 8i?
Thanx

Metalink Certification Matrix shows that Solaris 9 was the last one.
HTH
RK

How to install Oracle 11gR2 on Windows 7

Hi friend;
There are many questions about *"how we can make instalaltion on win7"*. Thatswhy i made one video tutorial which is mention *"How to install Oracle 11gR2 on Windows 7*
Its avaliable at my blog:
*http://heliosguneserol.wordpress.com/*
Hope it helps who need to make this installation
Regard
Helios

This question is not related to the Database Migration Assistant for Unicode (DMU). Please, post your question to one of the more appropriate forums, for example:
General Database Discussions
Database Installation
-- Sergiusz

Getting Problem installing Oracle 11gR2 on Windows 7 x64

Hello everyone,
beforhand thank you for helping a rookie. :-)
I getting an error message that my installation path contains empty spaces. C:\Program Files\....
In previous Releases of Oracle you could cancel these error message. Not in 11gR2.
Does anyone know a solution to install Oracle 11gR2 Client in the Windows Program Files (x86) / Program Files folder?
I modified the *.rsp File line "Complete path of the Oracle Home" with double quotes like in the previous Versions.
tried the environment variable "%...%" and also the DOS writing style "PROGRA~2".
Oracle takes over the complete notation.
Iam Working on a Windows 7 64 Bit Machine with an english Kernel.
Have to install: Oracle Client 11gR2 64 bit
Thank you in advance.
Best regards

Was there ever any thoughts on this issue? I'm using Oracle 11G R1 and it lets me cancel past errors saying I can't install to c:\program files\oracle because it has spaces and the programs I use also work perfectly fine.
Now, we're using Win 7, thus want to use Oracle 11G R2 so it won't fail OS checks and why not use the newest, right? Well, as stated here, you cannot cancel past "space" error any longer. I was going to try %programfiles% but it appears that that won't work; LAME!
Also, the runtime install for R2 says it's going to be 200MB more than the runtime install for R1, why would that be the case? That's a LOT more!
Thanks, Nick

Installing Oracle 11gR2 RAC issue

I am installing Oracle 11gR2(11.2.0.3) RAC on RHEL 5.6. I am facing "TCP connectivity check failed" on my precheck using CVU
Interface information for node "hublpr4"
Name   IP Address      Subnet          Gateway         Def. Gateway    HW Address        MTU
eth0   172.16.34.71    172.16.32.0     0.0.0.0         172.16.32.4     00:17:A4:77:08:10 1500
eth1   192.168.10.3    192.168.10.0    0.0.0.0         172.16.32.4     00:17:A4:77:08:12 1500
Interface information for node "hublpr3"
Name   IP Address      Subnet          Gateway         Def. Gateway    HW Address        MTU
eth0   172.16.34.69    172.16.32.0     0.0.0.0         172.16.32.4     00:17:A4:77:0C:30 1500
eth1   192.168.10.2    192.168.10.0    0.0.0.0         172.16.32.4     00:17:A4:77:0C:32 1500
Check: Node connectivity of subnet "172.16.32.0"
Source                          Destination                     Connected?
hublpr4[172.16.34.71]           hublpr3[172.16.34.69]           yes
Result: Node connectivity passed for subnet "172.16.32.0" with node(s) hublpr4,hublpr3
Check: TCP connectivity of subnet "172.16.32.0"
Source                          Destination                     Connected?
hublpr3:172.16.34.69            hublpr4:172.16.34.71            failed
ERROR:
PRVF-7617 : Node connectivity between "hublpr3 : 172.16.34.69" and "hublpr4 : 172.16.34.71" failed
Result: TCP connectivity check failed for subnet "172.16.32.0"
Check: Node connectivity of subnet "192.168.10.0"
Source                          Destination                     Connected?
hublpr4[192.168.10.3]           hublpr3[192.168.10.2]           yes
Result: Node connectivity passed for subnet "192.168.10.0" with node(s) hublpr4,hublpr3
Check: TCP connectivity of subnet "192.168.10.0"
Source                          Destination                     Connected?
hublpr3:192.168.10.2            hublpr4:192.168.10.3            failed
ERROR:
PRVF-7617 : Node connectivity between "hublpr3 : 192.168.10.2" and "hublpr4 : 192.168.10.3" failed
Result: TCP connectivity check failed for subnet "192.168.10.0"
Interfaces found on subnet "172.16.32.0" that are likely candidates for VIP are:
hublpr4 eth0:172.16.34.71
hublpr3 eth0:172.16.34.69
WARNING:
Could not find a suitable set of interfaces for the private interconnect
Checking subnet mask consistency...
Subnet mask consistency check passed for subnet "172.16.32.0".
Subnet mask consistency check passed for subnet "192.168.10.0".
Subnet mask consistency check passed.
Result: Node connectivity check failed
Checking multicast communication...
Checking subnet "172.16.32.0" for multicast communication with multicast group "230.0.1.0"...
PRVG-11134 : Interface "172.16.34.71" on node "hublpr4" is not able to communicate with interface "172.16.34.71" on node "hublpr4"
PRVG-11134 : Interface "172.16.34.71" on node "hublpr4" is not able to communicate with interface "172.16.34.69" on node "hublpr3"
PRVG-11134 : Interface "172.16.34.69" on node "hublpr3" is not able to communicate with interface "172.16.34.71" on node "hublpr4"
PRVG-11134 : Interface "172.16.34.69" on node "hublpr3" is not able to communicate with interface "172.16.34.69" on node "hublpr3"
Checking subnet "172.16.32.0" for multicast communication with multicast group "224.0.0.251"...
PRVG-11134 : Interface "172.16.34.71" on node "hublpr4" is not able to communicate with interface "172.16.34.71" on node "hublpr4"
PRVG-11134 : Interface "172.16.34.71" on node "hublpr4" is not able to communicate with interface "172.16.34.69" on node "hublpr3"
PRVG-11134 : Interface "172.16.34.69" on node "hublpr3" is not able to communicate with interface "172.16.34.71" on node "hublpr4"
PRVG-11134 : Interface "172.16.34.69" on node "hublpr3" is not able to communicate with interface "172.16.34.69" on node "hublpr3"
Checking subnet "192.168.10.0" for multicast communication with multicast group "230.0.1.0"...
PRVG-11134 : Interface "192.168.10.3" on node "hublpr4" is not able to communicate with interface "192.168.10.3" on node "hublpr4"
PRVG-11134 : Interface "192.168.10.3" on node "hublpr4" is not able to communicate with interface "192.168.10.2" on node "hublpr3"
PRVG-11134 : Interface "192.168.10.2" on node "hublpr3" is not able to communicate with interface "192.168.10.3" on node "hublpr4"
PRVG-11134 : Interface "192.168.10.2" on node "hublpr3" is not able to communicate with interface "192.168.10.2" on node "hublpr3"
Checking subnet "192.168.10.0" for multicast communication with multicast group "224.0.0.251"...
PRVG-11134 : Interface "192.168.10.3" on node "hublpr4" is not able to communicate with interface "192.168.10.3" on node "hublpr4"
PRVG-11134 : Interface "192.168.10.3" on node "hublpr4" is not able to communicate with interface "192.168.10.2" on node "hublpr3"
PRVG-11134 : Interface "192.168.10.2" on node "hublpr3" is not able to communicate with interface "192.168.10.3" on node "hublpr4"
PRVG-11134 : Interface "192.168.10.2" on node "hublpr3" is not able to communicate with interface "192.168.10.2" on node "hublpr3"

Try following metalink note for sorting out multicast issues.
Oracle Grid Infrastructure 11.2.0.2 Installation or Upgrade may fail due to Multicasting Requirement [ID 1212703.1]

ASM configureation while installing oracle 11gR2 db

hi all,
I want to install oracle 11gr2 with ASM on windows 7.
can any one tell me how to install step by step?
Thanks and Regards,
Vikash (junior DBA)

This question is not related to the Database Migration Assistant for Unicode (DMU). Please, post your question to one of the more appropriate forums, for example:
General Database Discussions
Database Installation
-- Sergiusz

Installing Oracle 8i in Solaris Intel Version With Pentium 4

Hi Guys,
I am trying to Install Oracle 8i under Solaris 8 Intel version with Pentium 4 processor fixed.But iam'nt able to continue after I click "Install" button,the runInstaller exited badly with no response.I was told that even Installing Oracle under Windows P4 is facing the same problem,but on searching I got solution by renaming a DDL file before starting installation.Is there any similar method to do for installing it under p4 processor on solaris intel 8 version.

Dear Mr. Kumar, i am chandrasekaran from singapore, actualy i need your help regarding the intel sun os oracle. I have Intel Based SUN OS, but i try to get Oracle CD Any version either 8i or 9i for intel sun os.
One of my friend have the cd but it already damaged so that i need your help.
My address
S.Chandrasekaran, Blk 84 #07-93, Commonwealth close, Singapore 140084. If you have the cd you make one copy for me and send by post. Thank you
My email id: [email protected] or yahoo.com
by chandran.s

ORA-27102: out of memory. Faild to install oracle 10gR2 on Solaris 10

Hi, I want to install oracle on my solaris machine. I have 2.5G RAM and more than 5G swap file. But the ORA-27102: out of memory error occurred at installing the Oracle Database Configuration Assistant step(Copying database files Creating and starting Oracle instance).
The only warnings bellow:
Checking kernel parameters
Checking for BIT_SIZE=64; found BIT_SIZE=64. Passed
Checking for shmsys:shminfo_shmmax=4294967295; found no entry. Failed <<<<
Checking for shmsys:shminfo_shmmni=100; found no entry. Failed <<<<
Checking for semsys:seminfo_semmni=100; found no entry. Failed <<<<
Checking for semsys:seminfo_semmsl=256; found no entry. Failed <<<<
Check complete. The overall result of this check is: Failed <<<<
Problem: The kernel parameters do not meet the minimum requirements (see above).
What's the reason and how may I resolve it?
Thanks!

I set some kernel parameters like: set shmsys:shminfo_shmmax=4294967295 and so on. Restart the computer and run dbca+ and configure in advance mode. There's a stage require the size of flash_recover_segment of which the default size number is 2048M. WOW, out of memory on my pc of course.
So I think it's the parameter value during the installation progress bring on the ORA-27102 problem. However, during the first installation, there's no prompt for me to enter the parameter; or I didn't see.

Installing Oracle 11gR2 client from a batch file and it returns before done

Hello,
While installing Oracle 11gR2 client on XP and 7 from a batch file. When it launches the OUI from the batch file, it returns to the batch file before the installer finishes. So, there is no way for my script to know when the installer is done, or to glean a return code to test for success. This is particularly annoying...
I've also used the "call" command to force my batch file to wait, to no avail. Anyone have any clues about this one?
Thanks in advance!
--Robert

Srini,
Awesome! Worked like a charm.
Many thanks!
--Robert

Can I install oracle 11gR2 on windows AD server?

I have a windows 2008 sever which has AD installed, can I install oracle 11gR2 on it?

If by AD you mean Active Directory, then it should not be an issue, as long as you meet minimum requirements - http://download.oracle.com/docs/cd/E11882_01/install.112/e10843/reqs.htm#i1011417
HTH
Srini

NTP(Network Time Protocol) Error whil installing Oracle 11gR2 RAC

Dear Friends,
I have installed oracle 11gr2 clusterware software in two node RAC. While i run the CLUVFY.SH, It shows error in NTP configuration.
1)I add "-x" parameter in "/etc/sysconfig/ntp" configuration file. and start the ntpd service and run the cluvfy.sh . then i got the below error.
Check: CTSS state
Node Name State
rac2 Observer
rac1 Observer
CTSS is in Observer state. Switching over to clock synchronization checks using NTP
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
The NTP configuration file "/etc/ntp.conf" is available on all nodes
NTP Configuration file check passed
Checking daemon liveness...
Check: Liveness for "ntpd"
Node Name Running?
rac2 no
rac1 no
Result: Liveness check failed for "ntpd"
PRVF-5415 : Check to see if NTP daemon is running failed
Result: Clock synchronization check using Network Time Protocol(NTP) failed
PRVF-9652 : Cluster Time Synchronization Services check failed
Post-check for cluster services setup was unsuccessful on all the nodes.
=============================================================================================
2)Down the ntpd service in both nodes and run the CLUVFY.SH.
Check: CTSS state
Node Name State
rac2 Observer
rac1 Observer
CTSS is in Observer state. Switching over to clock synchronization checks using NTP
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
The NTP configuration file "/etc/ntp.conf" is available on all nodes
NTP Configuration file check passed
Checking daemon liveness...
Check: Liveness for "ntpd"
Node Name Running?
rac2 no
rac1 yes
Result: Liveness check failed for "ntpd"
PRVF-5415 : Check to see if NTP daemon is running failed
Result: Clock synchronization check using Network Time Protocol(NTP) failed
PRVF-9652 : Cluster Time Synchronization Services check failed
Post-check for cluster services setup was unsuccessful on all the nodes.
==========================================================================
3)Based on some website advice, I down the ntpd service and move the "/etc/ntpd.conf" to another location.Then i got the below error.
Result: Query of CTSS for time offset passed
Check CTSS state started...
Check: CTSS state
Node Name State
rac2 Observer
CTSS is in Observer state. Switching over to clock synchronization checks using NTP
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
ERROR:
PRVF-5402 : Warning: Could not find NTP configuration file "/etc/ntp.conf" on node "rac2"
PRVF-5405 : The NTP configuration file "/etc/ntp.conf" does not exist on all nodes
rac2
PRVF-5414 : Check of NTP Config file failed on all nodes. Cannot proceed further for the NTP tests
Result: Clock synchronization check using Network Time Protocol(NTP) failed
PRVF-9652 : Cluster Time Synchronization Services check failed
=============================================================
What should i do to solve this issue?? Please help me ...

Hi,
I start the ntpd start the service in both node and done the CLUVFY.SH.
The output is below,
Checking if CTSS Resource is running on all nodes...
Check: CTSS Resource running on all nodes
Node Name Status
rac2 passed
rac1 passed
Result: CTSS resource check passed
Querying CTSS for time offset on all nodes...
Result: Query of CTSS for time offset passed
Check CTSS state started...
Check: CTSS state
Node Name State
rac2 Observer
rac1 Observer
CTSS is in Observer state. Switching over to clock synchronization checks using NTP
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
The NTP configuration file "/etc/ntp.conf" is available on all nodes
NTP Configuration file check passed
Checking daemon liveness...
Check: Liveness for "ntpd"
Node Name Running?
rac2 yes
rac1 yes
Result: Liveness check passed for "ntpd"
Checking NTP daemon command line for slewing option "-x"
Check: NTP daemon command line
Node Name Slewing Option Set?
rac2 yes
rac1 yes
Result:
NTP daemon slewing option check passed
Checking NTP daemon's boot time configuration, in file "/etc/sysconfig/ntpd", for slewing option "-x"
Check: NTP daemon's boot time configuration
Node Name Slewing Option Set?
rac2 yes
rac1 yes
Result:
NTP daemon's boot time configuration check for slewing option passed
NTP common Time Server Check started...
PRVF-5410 : Check of common NTP Time Server failed
PRVF-5416 : Query of NTP daemon failed on all nodes
Result: Clock synchronization check using Network Time Protocol(NTP) passed
Oracle Cluster Time Synchronization Services check passed
========================================================================================
[oracle@rac1 ~]$ /u01/app/grid/oracle/product/10.2.0/db_1/bin/cluvfy comp clocksync
Verifying Clock Synchronization across the cluster nodes
Checking if Clusterware is installed on all nodes...
Check of Clusterware install passed
Checking if CTSS Resource is running on all nodes...
CTSS resource check passed
Querying CTSS for time offset on all nodes...
Query of CTSS for time offset passed
Check CTSS state started...
CTSS is in Observer state. Switching over to clock synchronization checks using NTP
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
NTP Configuration file check passed
Checking daemon liveness...
Liveness check passed for "ntpd"
NTP daemon slewing option check passed
NTP daemon's boot time configuration check for slewing option passed
NTP common Time Server Check started...
PRVF-5410 : Check of common NTP Time Server failed
PRVF-5416 : Query of NTP daemon failed on all nodes
Clock synchronization check using Network Time Protocol(NTP) passed
Oracle Cluster Time Synchronization Services check passed
Verification of Clock Synchronization across the cluster nodes was successful.
[oracle@rac1 ~]$
================================================================================
I hope the problem solved. Am i correct??

Guide to install Oracle 11gr2 on solaris 10 wiht SAN storage

Similar Messages

Maybe you are looking for