Guide to Printing The Lorax Daily Print Activities

Welcome to HP’s Support Forum! If you need help with The Lorax Daily Print Activities, you are in the right place!
What is The Lorax Daily Print Activities?
How do I install The Lorax Daily Print Activities?
How do I set up The Lorax Daily Print Activities?
The Lorax Daily Print Activities did not print
I got an error message with The Lorax Daily Print Activities
How do I un-install The Lorax Daily Print Activities?
Why did I get a "You Have Missed a Print" message with The Lorax Daily Print Activities?
How do I print more copies, or in grayscale, or on special media with The Lorax Daily Print Activiti...
If you have a problem that isn’t addressed above, don’t give up! HP’s Support Forum puts you in touch with a community of knowledgeable people who are eager to help. Here’s how you use the forum:
If any of the links to topics above address your problem, click it to see our solutions. If they don’t work for you, click Register to sign into the Forum, and then click Reply to ask for more help.
If none of the links match your problem, use the search box at the top of this page to look for other questions similar to yours. You might find a post that has already been answered.
If you can’t find any questions similar to yours, click Register above to sign on to the Forum and ask the community!
The Lorax Daily Print Activities (c) 2012 Universal Studios. All Rights Reserved.
I work on HP's behalf.

Can The Lorax Daily Print Activities be used on a MAC?

Similar Messages

How do I set up The Lorax Daily Print Activities?

The steps are pretty simple:
Open The Lorax Daily Print Activities. The application should open as soon as installation is complete. You can also open the program by clicking your desktop icon, or by clicking Start, then All Programs, then the name of the particular application.
To set up the application to print, follow these steps:
(1) Select each of the days when you want prints.
(2) Select the time of day when you want your prints (these are in hourly slots).
(3) Select your printer from the list (PDF and XPS writers are not supported). .
(4) Don’t forget to click Save when you’re through!
You can also click the wrench icon () to open the Settings dialog, where you can:
(1) Turn Scheduled Printing On or Off (you might want to turn scheduled printing Off when you go on vacation, for instance).
(2) Set the desired action for when a scheduled print is missed. If you want the item to print immediately when you log in, select Automatically. If you want to be asked before an item is printed, select When Prompted. If you just want to skip missed items, select Never.
(3) Click Save in the Settings dialog to save your changes.
Don’t forget that on the days and times you’ve selected, your printer must be turned on, have paper, and be connected to your computer, and your computer must be on and connected to the Internet. Happy printing!
Did this answer your question? If it did, why not click the Kudos! button to the left?
If it didn’t answer your question about a printing problem, click Reply to ask the community, or search the forum for other posts that might help.
Or click here to go back to the Guide to Printing The Lorax Daily Print Activities.
The Lorax Daily Print Activities (c) 2012 Universal Studios. All Rights Reserved.
I work on HP's behalf.

Can The Lorax Daily Print Activities be used on a MAC?

How do I print more copies, grayscale, or on special media with The Lorax Daily Print Activities?

If you want to print multiple copies of an item, or choose a different paper type or print setup (like black and white printing), do the following:
Load the printer with your media and make sure the printer is on,
Open The Lorax Daily Print Activities.
Click Print Now.
Make changes to the number of copies, paper type, or print style in the Print dialog.
Did this answer your question? If it did, why not click the Kudos! button to the left?
If it didn’t answer your question about a printing problem, click Reply to ask the community, or search the forum for other posts that might help.
Or click here to go back to the Guide to Printing The Lorax Daily Print Activities.
The Lorax Daily Print Activities (c) 2012 Universal Studios. All Rights Reserved.
I work on HP's behalf.

Can The Lorax Daily Print Activities be used on a MAC?

How do I install The Lorax Daily Print Activities?

First, make sure your computer and printer meet the system requirements:
Windows XP SP2 and above (32- and 64-bit), Windows Vista (32- and 64-bit), Windows 7 (32- and 64-bit)
Connected printer
Internet access
After that, installing The Lorax Daily Print Activities is easy and quick:
Start at www.theloraxmovie.com.
Click on The Lorax Daily Print Activities, then click Download Now.
Click either Register and Continue Download or Continue Download.
If you see a security warning, click Yes to continue.
Click Run (depending on your browser), or Save to download and run the program. After you click Run, or after you download the file and then double-click it to begin, the Setup Wizard opens.
Click Next. The License Agreement dialog opens.
Read the agreement, then select I Agree and click Next if you wish to continue. The Privacy Disclosure dialog opens.
Read the Privacy Disclosure and then click Next if you wish to continue. The Select Installation Folder dialog opens.
If you want to accept the default location (recommended), just click Next. Click Next again to begin the installation.
The Installation Complete dialog opens at the end of the installation process. Launch is pre-selected and will automatically launch the application when you close installation (you can uncheck if you want to launch at later stage). Click Close.
Did this answer your question? If it did, why not click the Kudos! button to the left?
If it didn’t answer your question about a printing problem, click Reply to ask the community, or search the forum for other posts that might help.
Or click here to go back to the Guide to Printing The Lorax Daily Print Activities.
The Lorax Daily Print Activities (c) 2012 Universal Studios. All Rights Reserved.
I work on HP's behalf.

Hi ProfMed,
Good question. Not sure if there is a good answer.
I'm not an expert on iPads, so don't know if it is possible. If you can meet the system requirements:
Windows XP SP2 and above (32- and 64-bit), Windows Vista (32- and 64-bit), Windows 7 (32- and 64-bit)
Connected printer
Internet access
Then it should work. Otherwise
Best of luck,
Mary
{I work on HP's behalf}

Why did I get a "You Have Missed a Print" message with The Lorax Daily Print Activities?

You will miss a scheduled print if your computer is turned off or not connected to the Internet, or if you are logged out. When you see the “You have missed a print” message, you can click Print to print now, or Skip.
You can set The Lorax Daily Print Activities to automatically do the same thing every time you miss a print.
Open The Lorax Daily Print Activities.
Click the wrench icon () to open the Settings dialog.
If you want missed items to print immediately when you log in, select Automatically. If you want to be asked before an item is printed, select When Prompted. If you always want to skip missed items, select Never.
Click Save in the Settings dialog to save your changes.
Did this answer your question? If it did, why not click the Kudos! button to the left?
If it didn’t answer your question about a printing problem, click Reply to ask the community, or search the forum for other posts that might help.
Or click here to go back to the Guide to Printing The Lorax Daily Print Activities.
The Lorax Daily Print Activities (c) 2012 Universal Studios. All Rights Reserved.
I work on HP's behalf.

Can The Lorax Daily Print Activities be used on a MAC?

Printing the dashbord using Print Button

Hi all
I have a Print button (supplied in Xcelsius) to print the dashboard current page. When I print the dashboard, I see there is two scoll bars at edge of the page. one down and the other right side. It means the page is bigger than it would be. However I don't have this issue on the screen, and also for another printer, it looks perfectly fit. As we can not control on the printers which clients use to print the dashboard, I need to know what I can do on my side to prevent having scroll bars on the printed page.
Thanks in advance.

There problem in fact was in printer's seting up. The printer was working but the correct driver has not been run for its set up. After installing it again using the proper driver, the issues in the printing resolved.
Thanks for your contributions.

Home and Work Printer the same - causing printing issues

I have a Photosmart Plus as my main printer in the office. I really liked it so purchased the same model for home use. However, any documents I have created/saved on my home computer will not print on my work printer (and vice versa).
Any thoughts?

The pdf test is meant to see if the problem lies with Word.
Take a look at this kb support doc from M$.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Two sided printing, the second side prints upside down, what have it done

I know that a setting has been changed, I just can't remember what I did.
When using the two sided printing the orientiation of the back side is upside down. What have I done? and how can I fix it? Help?
This question was solved.
View Solution.

Hi,
From the application used to print open the printer dialog, then click on ettings or Preferences to access to Printig Preferences dialog.
Within the Layout tab change the Print on both sides option.
For a portrait oriented document select Flip on Long Edge, for a Landscape one select Flip on Short Edge, then it will print as expected.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Unable to print the report after SP2 (CR 2008 / VS 2008)?

I'm developing an ASP.NET application using VS 2008 (Framework 3.5). I have installed CR 2008 with SP (0, 1, and 2).
I created an invoice report and I printed it as test for the report and it works okay. I needed to change the page size of the report to a user defined size and reset all of the margins to zero.
After I did that I was unable to print the report again and every time I tried to print the report nothing gets printed.
I checked my environment to find the cause of this problem but I found nothing except that I'm using CR runtime for SP1 and I'm currently using SP2. So I did remove CR runtime for SP1 and install CR runtime for SP2.
The problem didn't go away and I faced one more problem.
Usually I'm using a dataset as a data source for my reports. After installing the CR runtime for SP2 I couldn't see any date column in my report data source (Dataset). All other types of columns appear except date fields! Why I have no Idea?
After I do some more testing regarding my issue I found out the following
1. When I add a new report to my web application and I don't change the page setting the report work fine.
2. When I change the page setup settings (Page Margins, horizontal width and vertical height) the report show up okay but never gets printed.
Why I don't know?
Addition to that the report dataset (Data Source) showing in the field explorer never shows any date type field?
All of the above issues happened with me after installing SP2.
OS: WindowsXP Pro SP3
CR 2008 (SP 0, 1, 2)
VS 2008 SP1
Please I need your help.
Edited by: Sami Aljafer on Oct 12, 2009 8:35 PM
Edited by: Sami Aljafer on Oct 12, 2009 8:38 PM

Hi, Sami;
Are you printing from the Crystal preview window, or in code?
If you are printing from the preview window, try printing via code, such as:
An example of print to printer:
crReportDocument = New ReportDocument
crReportDocument.Load("h:\labels2.rpt")
''Use error handling in case an error occurs
Try
''Set the printer name to print the report to. By default the sample
''report does not have a defult printer specified. This will tell the
''engine to use the specified printer to print the report. Print out
''a test page (from Printer properties) to get the correct value.
crReportDocument.PrintOptions.PrinterName = "
dwcb12003\ZDesigner ZM400 200 dpi (ZPL)"
''Start the printing process. Provide details of the print job
''using the arguments.
crReportDocument.PrintToPrinter(1, True, 1, 1)
Please post your question about the dataset as a new post.
Regards,
Jonathan
Edited by: Jonathan Parminter on Oct 12, 2009 2:28 PM

Cannot print the report on Window 7 64 bit

Hi all,
I try to print the report using Print icon on Crystal Report Viewer but it does not print out and no error display. Any idea how to fix it? Is it a bug when print on Window 7 64 bit OS? Thanks.

I'd go with Don's suggestion:
http://support.microsoft.com/kb/184291/en-us
- Ludek

HT1923 I have just updated itunes and now I can't print the playlist when I burn a list to cd. How do make a cd case cover or list of songs?

I just recently updated itunes and now I can't print the playlist or print a cd case cover. I want to at least print a list of songs to go in the cd case. How do I do that?

beggsc54, There were some printing bugs in iTunes 11.0 which reportedly have been fixed in 11.0.1. If you haven't upgraded yet, install the latest iTunes and try again.

When printing the report , it will show an error

Post Author: tramp168
CA Forum: General
I use crystal report2005 in C#2005 to design several reports, all the reports can be shown normally when previewing on the all user computer, and the reports can be printed on most of user's PCs, but two users can't print the reports, when printing,it will show below error:
Error in file c:\docum~1\..............*.rpt
the request could not be submitted for backgroud processing.
how to handle the issue.
thanks all in advance!

Post Author: V361
CA Forum: General
do the two users who can not print, have the same printer types installed as those that the report does print on ? (May need to add a NEW printer definition to the failing computers, and see if the report works)

HP Photosmart pro B9180 the color blue prints lavender...using advanced HP photo paper ideas?

HP photosmart pro B9180 win xp no recent changes prior to problem...question is how to get quality color from this printer, the color blue prints lavender, I am using correct ink and hp advanced paper

Hard Reset – While printer is powered ON, pull
the power cord from the printer then from the
wall. After 30 seconds reconnect power to wall
and printer. This will trigger a ‘dirty power up’
and restore the printer to a known good
condition (if it is possible). No user settings are
lost with a ‘hard reset’.
This ‘Hard Reset’ is one of the most powerful
tools to use when the printer hardware is not
functioning properly!
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

Lookout: How to have the Client automatically print the alarms from the server process?

Before we switched to using servers and clients, the server computer would print all alarms. Now we have switched to having 2 servers and many clients. We would like to have Lookout print automatically all of the alarms as they occure or reset.
MWarner

Lookout client cannot automatically print the alarm to printer. I'm sorry that lookout client doesn't have this feature.
My suggestion is to set up the printer beside the server computer and print the alarms automatically by lookout server.
Ryan Shi
National Instruments

How to print the header information journal from FB03

Hi
I would like the FB03 to show the header e.g. Entered by/ Parked by on the screen, without clicking the header button. So I can print the journal via printer with those information.
Thank you
Sirirak

Hey,
This also depends from the SAP release that you are using.
Release undependent I suppose you have the following possibilities:
- Use the line item extract report S_ALR_87012347. Here at least you can see the entry date (this transaction does of course not work for parked documents.
- Create a query on an infoset mit logical database BRM
Best regards,
Koen

Guide to Printing The Lorax Daily Print Activities

Similar Messages

Maybe you are looking for