Had to reformat my imac but now can't access time capsule to get my old fil

I had to reformat my imac, running snow leopard. Got it reinstalled. I'm reading my time capsule volume but it has problems connecting to allow me to restore my old settings files, (photos, music etc)
I'm not sure if I'm tackling this correctly. I'm using Migration Assistant, should I be going through Time Machine? I tried both but am having issues. My airport setting are fine. Any ideas anyone?

Thanks for the feedback and the link to the help page.
I had to reformat because my imac was not responding at all. It would open but super slow. In disc utilities I tried reparing disc multiple times, kept getting a message saying the disc was corrupted something about sibling error???, back up all your files, erase and restore.
I've been running snow leopard and have had a time capsule for a while so I erased and spent the next two days trying to reinstall OSX unsuccessfully. Called the apple tech support, tried their idea of reinstalling snow leopard after an erase. It would not install.
Took my computer into the genius bar and they were able to reinstall immediately. We tried a direct ethernet connect to my time capsule at the genius bar but it would not work. It didn't see any time machine volume. The time capsule was flahing yellow. When I hook it to my router it is solid green, gives me a "connecting message" but doesn't open.
anyway so now I bring the imac back home and it won't connect to time machine. Will try from my disc to restore from time machine and will hook up with ethernet again, see if it works.
I feel I'm missing a step when I connect direct with the ethernet but have a flashign yellow light on time capsule. Any ideas on that.
thanks again

Similar Messages

  • Previously backed up wife's Compaq Laptop along with my iMac and MacBook Pro to Time Capsule.  Replaced wife's Windows Vista Laptop with new Sony Windows 8 Laptop.  Now can't access Time Capsule to back-up.

    I also need advice on removing old Compaq back-up.  That laptop is dead.  Hard drive wiped and removed before recycling.  Help

    Windows 8 seems to still be waiting for bonjour..
    Open windows explorer and type in the TC address directly in the address bar.
    \\TCIPaddress or TCname
    Replace with the actual of course.
    If no go, ping the TC ip address .. still no go, then the networking on the windows machine is set wrongly.. never used win8 so no idea.. but turn off the firewall and ensure the laptop is in the home area, not work not public.
    You have to get ping response to open the TC.
    On the TC setup the guest access to on and full read and write access.

  • I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

    I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

    In iTunes prefs>Store - is the Store check box unchecked?
    Did you repair pemissions with Disk Utility?
    MJ

  • I'm an admin of this site, but now can't access some pages in Project Server 2013 e.g. Project center, PWA setting

    I'm an admin of this site, but now can't access some pages in Project Server 2013 e.g. Project center, PWA setting

    it may be your browser.  CHeck the folloinwg
    1) Turn on Compatibilty mode
    2) Security Options / Make it a local trusted site
    3) Turn of Protected Mode in the browser under Security
    and have you tried it from Chrome
    CHeers!
    Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
    Website http://www.WhartonComputer.com
    Blog http://MyProjectExpert.com contains my field notes and SQL queries

  • I used to be able to but now can't access the iCloud on my iPad...help

    I used to be able to but now can't access the iCloud on my iPad...help

    Welcome to the Apple Community.
    Could you please elaborate a little.

  • I have not used my Itunes in years and I had a large music libary but i can not access my old music

    I have not used my I tunes in years and had a large music libary but I can not access my old music

    What do you mean you cannot access it?
    It will be wherever you put it.
    Please explain.

  • HT201320 I changed my yahoo password but now can not access mail on my iPad  The settings for email is not a hot link

    I changed my yahoo password but now can not access mail on my iPad  The settings for email is not a hot link

    Go into setting on the iPad
    Mail, Calendar, contact...
    Tap your email account
    back out the dots and enter the correct passcode.

  • Can I access time capsule file without using imac

    can I access time capsule file without using imac

    From a time machine backup? No. If you mean just a regular file stored on there? Not directly. There are a couple of apps out there where you can indirectly get to a file but it's a pain. If you have need of accessing a file both from the mac and the iPad then I suggest DropBox. You get 2GB free and it's a good way to share information between machines and devices.

  • After upgrading to Lion I can't access time capsule pre lion.

    Last week I backedup to time capsule via cable.
    I then upgraded to Lion.
    After upgrading I backedup to TC again.
    Now my MBP 17  can't access time capsule pre lion. So I can't see any of my last 2 years of Snow Leopard data.

    yikes, I had to move all my years of iPhoto folders/pix from very old iMac to a new HP laptop with PC Vista Home Premium....now finally ready and hoping to do years worth of photo albums! so I go in to these files and of course they don't open...because they're on pc.
    - I am techno ignorant on all this, what can I do? Is there any way I can open these on PC or do I need to go back and reinstall on a very very very old AND slow slow slow mac? these photos were created in 199, 200, 2001 up through 2007 so through many versions of iPhoto and Mac OS. I am hoping I can retrieve them - and very worried I cannot! Would love advice and help.
    - and on a separate note, any good, inexpensive iPhoto and iTunew wizard/tech support professionals out there in the Menlo Park, CA area?

  • Can you access Time Capsule From any where, or do you have to be on the same network

    Can you access Time Capsule From any where, or do you have to be on the same network

    check out the post by Tesserax in this discussion.

  • Can you access time capsule from a mac over the internet

    Can you access time capsule from a mac over the internet?

    Yes. See this thread about how to access the disk attached to a Time Capsule.  Access to the Time Capsule itself can be done similarly.

  • MacBook Air 11" can't access Time Capsule Disk

    Hi:
    I have two Minis, a MPB 13" and a MBA 11" connected to my Time Capsule. My MBP and the two Minis can access the Time Capsule disk with no problem. It's a different story for the MBA.
    From the MBA, I can see my Time Capsule in Finder (Bonjour) and I can click on it, however the disk never appears. Clicking "connect as" doesn't do anything either. From Finder if I go "connect to server" and I type the IP address of my Time Capsule it connects without problems, but it won't connect with its name.
    I am able to connect the disk on my other Macs from the MBA via Bonjour, just not the Time Capsule. As mentionned earlier, the Time Capsule disk is available from my other Macs and even from Windows.
    I rebooted a few times and confirmed that the username/password are properly saved in the keychain of my MBA.
    Any idea how to fix this?
    Thanks!

    Are your other Macs connected via Wifi or ethernet? It sounds like some sort of network configuration issue. If they are connected via Wifi then I'd make sure the MBA has the same settings for it's network. Alternately I'd get rid of the keychain entry on the MBA and re-enter it to make sure it's correct. As a last resort I'd restart the Time Capsule and see if it makes a difference. I'm connecting a MBA to a Time Capsule so it should work.

  • Migration assistant can't access Time capsule back up

    Hello,
    my old Macbook pro died yesterday and I bought a new one. I am trying to migrate all my files from a Time Capsule/Time Machine back up using the migration assistant. However it does not work: I get the message
    "The back up cannot be opened. Make sure that all of your network devices are connected and turned on. It appears that this backup is already in use.  Make sure the backup is not currently mounted by another machine and try again."
    I can connect of course to my Time Capsule, and see the sparsebundle file.
    What should I do?
    I am always on Leopard both on the old and the new Macs.
    Thanks!

    So far I have made an improvement: I have managed to unmount all users using the Airport utility, and now it seems the Migration assistant would be working...
    More news soon.
    Thanks

  • Downloaded new iTunes but now can't access store....HELP PLEASE!

    In order to download a TV programme from iTunes I had to download a newer version of iTunes however, when I downloaded this it gave me a message saying in order to now use the iTunes store I had to have Safari 4, however, I can't download Safari 4 as my mac is only 10.5.2 and it needs to be 10.5.7, now can I update my mac to be 10.5.7 (I found this patch but don't want to download it unless it's right - http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1058comboupdate .html ) OR can I get rid of the iTunes I downloaded and have my old one back???

    found this patch but don't want to download it unless it's right - http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1058comboupdate .html
    That is the correct updater to bring your system up to the latest version of Mac OS X 10.5.
    OR can I get rid of the iTunes I downloaded and have my old one back???
    You can't but it's not particularly easy. Try updating Mac OS X and then installing Safari 4.0.3 and see where that gets you. Then if you continue to have problems, post back and someone can help further.
    Regards.

  • I have charter email. I was able to send attachments, but now can send no attachements - I keep getting an error message that the file cannot be read - help!

    I stared using charter for email January of this year. At that time I was able to attach word documents, but not jpg files. In the last 2 months now I can't attach word documents, either. I tried to send word docs from a yahoo mail account I created to see if the problem was with charter -it's not. I have the exact same problem with yahoo mail. Is there anything going on with Mozilla that's preventing mail servers access/reading capabilites of my files?

    Can you access the images on the phone with Image Capture (in the Applications Folder) ?

Maybe you are looking for

  • How to stop HTTP Security warning message in transactional iview

    When I am trying to access ECC through transactional iview then I am getting HTTP security warning message i.e. This page contains both secure and nonsecure items. Do you want to display the nonsecure items? I think it is because portal is accessable

  • CS3 Bridge on OS X: Find - no items to display - the long, painful fix

    Moved this post from the Elements forum in the hopes of more useful replies.<br /><br />Recently upgraded from Photoshop Elements 4.0 on OS X to Photoshop Elements 6.0 on OS X. The 'find' dialog box does not work - which is to say that it returns no

  • Getting music from my itunes to my my Nokia 6500

    Is it possible to get music from my i tunes to my nokia 6500. The 6500 apparently isn't compatible with the nokia media manager, and pc suite software doesn't work on macs. Is there a way around this??

  • Two Monitors cause crashes in 10.4.7?

    I remember reading a Macintouch article a couple months ago stating that two monitor systems crash in 10.4.7 and that this was a "known issue." Whether my recollection is correct or not, I had three or more mysterious crashes after updating to 10.4.7

  • Process Chain : Communication error

    Hi, i have DataSource from UDConnect and working good loading data, but when use the InfoPackage in Process Chain then have the Error : <b>Communication error: Incoming call is not authorized</b> Any idea for help me in detect the problem ?