Had to reset password but now it won't go past the gray screen. It tries to boot but turns off. How do I fix it?

My father forgot his password on his macboo pro. I followed the instructions on how to reset it. Now when I turn it on it goes to the gray screen and there's a loading bar but it doesn''t finish, the mac turns off. What do I do!!!

Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it is three times faster than wireless.

Similar Messages

  • Hi guys. I've had my MacBook Pro for 2 years now. Last night it suddenly kept glitching to a dark grey screen every now and then, then it would flash yellow / blue spots, and now it won't go past the grey screen even when I reboot it.  I don't think I can

    Hi guys.
    I've had my MacBook Pro for 2 years now. Last night it suddenly kept glitching to a dark grey screen every now and then, then it would flash yellow / blue spots, and now it won't go past the grey screen even when I reboot it.
    I don't think I can access my disk anymore as I've moved across countries since I've first gotten my laptop.  it was working perfectly fine before  it kept going to the dark grey screen with a little blue on the bottom.
    If it helps, my camera light is still on, and it seems that my computer is working properly itself, but won't go past this grey screen.
    I'm a college student and am really panicking about this - can anyone please tell me what to do?
    Thank you & sorry for the long post.

    What operating system are you running on it? (iOS 5.1 is for iPhone, iPad...not a Mac).

  • MacBook Pro will turn on, but won't go past the gray screen.

    Earlier today, my MacBook Pro took a small tumble to the ground.  I did not shut off, but it was working a bit slower. I decided to do a restart on it and now it will turn on, I can hear the CD drive is still operational, but it gets to the gray screen with the Apple logo and the spinner at the bottom and sits there.  Any suggestions or thoughts?

    Use Target Disk Mode:
    http://support.apple.com/kb/ht1661
    You will need a Firewire cable.
    Another option is to extract the HDD from the MBP, place in an enclosure and then connect it to the iMac.
    Ciao.

  • My computer won't load past the Gray screen with the apple, what do I do?

    Does anyone know how to get my computer to turn on? I used it on Friday and had a normal shut down but when I went to turn it on yesterday, it gets the the gray screen with the apple and the loading bar and loads half way and then just stops and sits there until it eventually shuts itself off. I have tried turning it off and then back on and holding the D key but nothing happened.

    Resetting SMC as well as NVRAM(PRAM) could solve the problem.
    Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
    Mac OS X: Gray screen appears during startup - Apple Support

  • I downloaded iOS 8.2 and now my phone won't connect to the iTunes store, and my iTunes Match is turned off and won't turn back on...

    I downloaded iOS 8.2 on my iPhone 5s 32 GB and now my phone won't connect to the iTunes store, and my iTunes Match is turned off and won't turn back on... I'm trying to log in from Settings > iTunes & App Store... not working...  I have reset the phone twice, tried via cell service, and rebooted my wireless router..

    As per the Apple iCloud status page, they are having issues. Do not make changes at your end.
    https://www.apple.com/support/systemstatus/
    Edit

  • I installed snow leopard which I now realise that it was the wrong one because it came out before my laptop and now it won't changed from the grey screen with the apple on it how do I fix it ???

    I installed snow leopard which I now realise that it was the wrong one because it came out before my laptop and now it won't changed from the grey screen with the apple on it how do I fix it ???

    MacBook Pro
    Apple - Support - MacBook Pro
    Mac OS Version builds
    When did yours come out? what does the above show as model and minimum build?
    You should have yoru OEM OS X DVD, not one from another Mac, or retail, though the last retail OS X DVD was a year ago 10.6.3.
    If it installed, I don't see an issue unless the drive had corrupt directory etc.
    What you need to do is repair your boot drive or restore from backup.

  • My iMac starts, but won't get past the loading screen?

    My iMac starts up, but won't even get past the white screen with the Apple logo.
    It kept giving me black screens, and would not start in safety mode. After command + option + p + r, the black screens stopped coming, but it still won't get past the loading screen, if I let it load long enough the Apple logo is replaced by a "denied" symbol but that is the only thing that happens. By hitting command + d, I was told nothing is wrong. When pressing command + r and going to disk utility, it found an issue while verifying and repairing. At first it stated "invalid journal" but now it only says to reinstall everything and that the problem couldn't be solved. I cannot mount the harddrive, and Time Machine just searches for copies without getting anywhere. When I try installing OS X (Mavericks) again, the harddrive doesn't even show up. What do I do?

    The HD sounds like it has crashed, take it into your local Apple Store or Apple Authorized Service Provider (AASP), if you bought AppleCare this will be covered. If you don't have an Apple Store in your area and don't know of any AASPs then please click https://locate.apple.com/country to begin finding one.

  • I have a Macbook and I left it unplugged. It started up slowly when I plugged it in again, but it seemed fine. Once it started charging I shut it down so it would be easier, but now it will not go past the grey screen with the apple. What do I do?

    I have a Macbook and I left it unplugged. It started up slowly when I plugged it in again, but it seemed fine. Once it started charging I shut it down so it would be easier, but now it will not go past the grey screen with the apple. What do I do?
    I have Snow leopard on my computer, and I tried to do a hard restart as an article suggested, but it did not work. I also tried cleaning out the PRAM.
    The only things I did last night:
    -cleaned the history of Firefox out, including cookies
    -let it unplugged all night
    -plugged it back in the morning, it took a long time to figure itself out, but eventually the time was correct and I got on the internet for a bit
    -shutdown the computer since I was going out and thought it would help the computer charge
    -came back, tried to turn it on, and found that it would not go past the grey screen the apple on it and the spinning wheel even though I left it for 20 minutes or more
    -tried turning it off and on to no avail

    Before doing a reinstall, which may not be needed at this point,
    Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
    You could have some directory corruption. Let us know what errors Disk Repair reports and if DU was able to repair them. This could just be a start in repairs and you may need a better utility to finish the job.
    Then Repair Permissions.
    No need to report any Permissions errors........we all get them.
       DALE

  • I updated my first generation iPad to version 5.1.1 and won't go past the setup screen that asks if I want to use the iPad locator. I can go back but can't get any further.

    I updated my first generation iPad to version 5.1.1 and won't go past the setup screen that asks if I want to use the iPad locator. I can go back but can't get any further

    I just updated my original iPad 32 GB WiFi to iOS 5.1 about fifteen minutes ago.  But I did it with the system restore feature in iTunes.  So it wiped out everything on my iPad.  But it did work.  Then I restored an earlier backup and all went fine.  Maybe you could try backing up your iPad and then using Restore to get it back to factory settings to see what happens. 

  • Computer won't get past the blue screen...

    During class today I decide to install new updates to my computer, but class ended before everything had downloaded so I just closed the screen thinking nothing of it. Now my computer won't get past the blue screen and it just keeps reloading and reloading. Help?

    You must have damaged your OS installation by putting the machine to sleep at the wrong moment. To fix that, you need to reinstall, but first you need to back up your data, if you haven't already done so. Have you?

  • IMac makes a loud beep on start up, won't load past the blue screen and the black ticking dial appears every few seconds in centre of screen.

    Urgent help!
    Out of the blue my mac lost the mouse cursor even though it had connection so I rebooted only for the mac to make a loud beep on start up then get stuck at the blue loading screen. It won't load past the blue screen. I've tried to reboot holding down the shift key but no change. I've also shut down, unplugged the main for 15 seconds, re plug and wait 5 seconds before starting up again but no change. Does anyone have any suggestions?
    PS: I'm not too sure which systems I am running without being able to check in about this mac. I bought my imac in January or February 2011 if that helps.

    The power on self-test resides in the ROM of the computer. This test runs whenever the computer is turned on after being fully shut down (the power-on self-test does not run if the computer is only restarted).
    If a fault is detected during the test, you will not hear a normal startup chime. Instead, the system will beep as explained below. If you experience one of these beeps, you may call your Apple Authorized Service Provider for additional troubleshooting assistance.
    1 beep = no RAM installed
    2 beeps = incompatible RAM types
    3 beeps = no good banks
    4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
    5 beeps = processor is not usable
    http://support.apple.com/kb/HT1547

  • I'm trying to log into iCloud on my Windows PC, and it won't budge past the Login Screen.  :(

    I haven't used my PC to log into iCloud for a while, and now it won't go beyond the Login Screen.    Has anyone else had this problem?  If so, how do I fix it?

    While we all have MacBooks in this forum most of us don’t use iCloud. There's an iCloud Support Community where everybody uses iCloud. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/icloud/icloud_on_my_mac

  • MBP won't reboot past the white screen with the grey apple. Why? How do I fix it?

    MBP won't reboot past the white screen with the grey apple. Why? How can I fix it?

    Which OS are you on.
    try doing an SMC reset http://support.apple.com/kb/HT3964
    How long do you wait until giving up??

  • Pavilion p6-2117 won't get past the splash screen with a parallel card installed.

    Pavilion p6-2117c won't get past the splash screen with a pci express parallel card installed.  I take the card out and the machine works just fine.  The screen says press "esc" for startup menu but nothing happens.
    This question was solved.
    View Solution.

    Take a careful look at the slot and see if any of the pins are broken or smashed to the bottom of the slot.  Do you have another pci slot to try or just the one?
    Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

  • My iPhone 4s (bought today) won't get past the activation screen. It says 'it may take a few minutes to activate your iPhone' and then skips to another screen saying 'activation failed - try again'. Any solutions?

    my iPhone 4s (bought today) won't get past the activation screen. It says 'it may take a few minutes to activate your iPhone' and then skips to another screen saying 'activation failed - try again'. Any solutions?

    Apple's activation server is down.
    I called Apple and the support team had the same issue.
    All you can do is be patient.

Maybe you are looking for

  • Touchscree​n not working in win 8 and after upgrade to 8.1

    I am facing touchscreen problem with my hp-b150us laptop for the last few months. It worked fine for 6 months after purchasing the laptop. Later upgraded to 8.1. It worked for couple of times. but once I shutdown and restart my laptop again the touch

  • Refresh Materialized View in a package

    Refresh Materialized View in a process. I have a USER2.Materialized view and when I want to refresh it I execute: execute dbms_mview.refresh('MV_FACT_SALES','C'); But I have the ETL process in a USER1.package The User1 needs any Materialized View Gra

  • Cannot install itunes - message "unknown publisher & no digital signature

    I have been using itunes for ages but on Tuesday when i tried to update my IPOD it froze so i then checked that i had the most up date itunes by downlading the latest version which i have done loads of times without any problem. THis time however eve

  • Cant open password protected numbers 09 file

    I created a Number 09 file and protected it with a password. IT worked for months but now everytime I try to open it I get this error message "THIS DOCUMENT CA NOT BE OPENED". I'm pretty certain its the right password, and its not giving me wrong pas

  • Is the Global Document Storage (GDS) used in Rights Management?

    I am setting up an Adobe LiveCycle ES3 server exclusively for Rights Management; and I am wondering if the folder for the Global Document Storage (GDS) will contain any files that need to be backup'ed in case for system recovery.  TS