HAL - SAP Connection Adapter

Does anyone know if it is possible to access SAP from within a HAL integration using a non-dialog SAP user ID? Our integrations currently pull SAP data using a regular SAP Logon ID, so we have to update the password and recreate the executables every time the password expires. If we could access SAP using a non-dialog SAP ID, it could be set up with a non-expiring password. Does anyone know if this is possible and if so, how to make it work?

To sort out this problem do the following steps:
1. Once the wsdl is created by Application explorer, manually configure the <jca:address>. This step is required if you are not using the DefaultConnection.
adapterInstanceJndi="eis/OracleJCAAdapter/MyNewConnection"
ConnectionSpec="com.ibi.afjca.cci.IWAFConnectionSpec"
cs.AdapterName="MySAP" cs.Config="SAPISU" UIConnectionName="Connection1"
2. Refresh your application server connection and test your Integration server connection each time you open JDev.
This will surely help you.
Cheers,
Shanty

Similar Messages

Add new System to SAP connection adapter - HAL

Hi. I would like to add a new System ID to Application Link's SAP connection adapter (HAL).
I mean: we have been changing SAP environment (i.e System ID) and I would like to add a new System ID in the list; however, as I create a new SAP connection, only a list of old System ID is displayed.
Even if I create and test correctly the new connection, the new System ID is still not displayed. Any advice?
Thanks a lot in advance

You have recieved or are starting SAP Logon pad and not SAP Logon.
C:\Program Files\SAP\FrontEnd\SAPgui\
C:\Program Files\SAP\SapSetup\setup\SAL\
saplgpad.*
saplogon.*
Regards,
/Wim
PS, to SAP developers: there are multiple companies frowning upon the decision to display the grayed-out buttons in saplgpad. I would hate to roll-out 720 with a in-house launcher for saplgpad that hides the buttons using some dirty hack.

Could not process due to error: com.sap.aii.adapter.file.ftp.FTPEx: 550

Hi Experts,
We have many File to EDI scenarios wherein XI System pick up the XML and sent to customers via EDI. Recently we faced a problem so created a Back-up System (Production copy) and tested successfully. After sometime the messages were routed to this back-up system and when we notice it and then stopped the back-up system. All the messages that were routed to back-up system, we try to send the same messages from the actually Production system to our customers. Now the problem is XI system (Production system) is unable to pick these files and I check the communication monitoring and encountered the below error message.
Could not process due to error: com.sap.aii.adapter.file.ftp.FTPEx: 550.550
Can anyone let me know how to fix the issue or what needs to be done?
Your help is highly appreciated.
Regards
Faisal

Hi,
It seems to be problem with permission of files. Please ask your basis to do following:
1. Set the permissions to FTP User you are using as 777 rights(full access to read , write and delete)
2.If you have access to PI server, try to telnet /connect to ftp using command prompt (open ftp .....) the FTP server form there, you should see the same error there , inform this to your network guys.
3.Clear all the files places already in the ftp (take backup) and test afresh after permissions are set by basis team.
Regards
Aashish Sinha

Receiver SAP SFTP adapter-errorlog on SFTP server

Experts,
I am using receiver SAP SFTP adapter to connect to an SFTP server and send files.Receiver SFTP server is a VMS system.I could able to write the files to home directory of the user that has been given,but apart from writing the files I am seeing warning log file in the the target folder on SFTP server like below description.I am giving dot(.) in the file path to write the files to the default directory that has been assigned to the user given by receiver SFTP server team.
WARNING: ssh_file_server_receive_proc: platform cannot stat() filename /home/dir1/dir2 ./TestFile(TestFile is my file name) .
Just to test,we placed files in the receiver SFTP server using same user and password as the PI recv SFTP channel with command line and winsCP client tool,but we don't see any error logs on the server with WinSCP tool or command line transfer of the files.Log file with above warning is generating only when we place files on the server using SAP SFTP adapter in the recv channel of PI.
Please let me know,if you have any insight or seen similar issue.
Thank you,
Sri

Hi Poonam - Blogs on SFTP : Just search for SFTP and filter by blogs/documents.. you can find many..
>>> http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/305eeb5b-81e7-2f10-d8aa-9216de04ca3e?QuickLink=index&overridelayout=true&57075820413417
http://scn.sap.com/docs/DOC-35572
I read in some of the SDN forum that SFTP adapter doesnt have the capability to read the files from multiple directories. So, if we get any requirement to read the files from multiple directories using sftP, why could be a possible solution for this requirement?
>>> Yes. It is only possible with NFS.
You have to define multiple channels/interfaces...

Com.sap.aii.adapter.file.ftp.FTPEx: 550

Hi,
I have the below error in my sender file channel. I also read the following thread
FTP Error
Error:
An error occurred while connecting to the FTP server '10.12.12.101:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 C:Inetpubftproot: The filename, directory name, or volume label syntax is incorrect. '. For details, contact your FTP server vendor.
The above thread suggests me to change the setting in the IIS. Should do that settings in the PI server or the source FTP server.
Also does anybody have any other solution to this problem.
Rgds,
Mithun

HI,
If you're using an FTP server you need to know the path to the file on the FTP.
To do this I suggest to connect to the FTP using Internet Explorer and navigating the FTP folders until reaching the right one.
Then on the url bar you should got something like this: "ftp://server:21/path/to/file/". Use "/path/to/file" as value for the file adapter configuration.
Please refer below blogs:
unable to send file to FTP server
FTP to Windows Server
thanks,

Could not process file 'Input 110110b.txt': com.sap.aii.adapter.file.

I have a FILE Adapter using FTP as a transport that is generating a very odd error.
The FTP sender channel is giving the following error is set up to retreive all files (*) from a specific directory. If you look at the error, it indicates an error processing the file 'Input 110110b.txt' as a file -- the only way this filename woudl be visible is if the adapater interrogated the directory, or the filename was hard-coded in the file mask. But the error indicates it can't change to the directory. The only way it would have come up with the file is if it had already CD'd t that directory.
1/7/11 8:12:01 AM   Retry interval started. Length: 60.0 seconds
1/7/11 8:12:01 AM   Could not process file 'Input 110110b.txt': com.sap.aii.adapter.file.ftp.FTPEx: 550 Failed to change directory.
1/7/11 8:12:00 AM   Processing started
My first thought was a simple permission issue, so I opened a connection to server with FileZilla (an FTP client) and was able to retrieve the file without a problem. I was also able to drop a file in the directory. There is no permissions problem.

Hi
Please check the below points before processing any file
a) check the File placing by a Local Plant FTP owner is using the same authentification credentials It means both PI and source team needs to use same FTP User ID and login credentials otherwise if suppose if source team is placing with one User and PI cannot able to pick that file as this User cannot have permissions in this case also u will get 550 error
b) I know what ur telling is u manualy palced one file and able retrive...but do one thing u can login with same PI FTP login server credentials and then place the file with different name also I suggest lets test the channel by simply keeping
. not simply * if you keep simply * then u cna use in receiver chanel while using dynamic connfiguration.
Else give *.txt and then activate the channel and also please check the CACHE as well
Regards
Amar Srinivas Eli

Com.sap.aii.adapter.file.ftp.FTPEx: 421

Hi Guys,
I am getting these two error messages:
1) com.sap.aii.adapter.file.ftp.FTPEx: 421 Maximum session time exceeded - closing
2) com.sap.aii.adapter.file.ftp.FTPEx: 421 Too many users - please try again later
when XI Sender File Adapter tries to pick the files from the FTP server.
I have not set any limit to the number of session for the user that I have mantianied in the adapter. (Niether I know it -:) how to set.)
Any idea or help, how to resove this error.
Thanks in adavance,
Namadev

Hi Namdev,
Your this error is coming as your FTP server maximum allowed connection is reached. so as the solution I would suggest to change the Connection mode property of your communication channel as Per File Transfer as default property is Permanently which reserves connection forever.
So other communication channels cannot communicate. Make this changes to all the communication channel you have configured.
And your problem is solved.
enjoy....
Thanks & Regards,
Gaurav Patwari

Com.sap.aii.adapter.file.ftp.FTPEx: 550 You are not allowed to issue this

hi All,
We are getting below error while connecting to an FTP location through File Adapter:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: An error occurred while connecting to the FTP server XYZ. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 You are not allowed to issue this command'. For details, contact your FTP server vendor.
Also when we tried to connect to this FTP location through PI server we able to connect, but when we connect to it through channel we are getting above error.
Please Help!
Thanks,
Mayank

hi All,
The usedid we are using to connect to FTP location has appropriate access to write(we have an receiver file adapter) the files, when we connected to FTP location from PI server using same useid(as used in channel) we are able to connect to FTP location and also able to write the file there.
Now error soming is:
An error occurred while connecting to the FTP server XYZ. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 Operation is not supported under Connect:Enterprise FTP server.'. For details, contact your FTP server vendor.
Thanks,
Mayank

'com.sap.aii.adapter.file.ftp.FTPEx: 501 Unknown error

Hello ,
I am facing an error in communication channel while trying to post the file to the FTP server,
The error is " Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: An error occurred while connecting to the FTP server '10.100.5.00:20'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 501 Unknown error'. For details, contact your FTP server vendor"
Please could you advice what need to be done to resolve this.
Thanks ,
Siva

Hi ,
FTP 501 Error is: "Syntax error in parameters or arguments"
Also, i see that the ftp address and port mentioned in your case is:
10.100.5.00:20
Hence, i see three probable issues here.
1. FTP Port :
Just check if the FTP server's port number '20' mentioned in your case is open as this is the data connection port. Moreover, the default port mentioned while creating a file channel is 21. Just check about the port number '20' with the FTP server administrator if this port number is opened and functioning.
2. FTP server address:
Also, try giving your FTP Server's address as 10.100.5.0
3. Also, check if the FTP server is reachable from the PI Server by using a simple ping command.

FTP error-Unable to create new pooled resource: com.sap.aii.adapter.file.ft

Hi,
We have a scenario where XI receives a Idoc and based on the contents of Idoc, It will generate 5 different files and send it to the external FTP server.We configured 5 receiver channels for these 5 files.
When this interface runs, most of the files will be delivered but some of the messages will be errored out.
The receiver channel has shown the following error-
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: com.sap.aii.adapter.file.ftp.FTPEx
I tried to resend them by temperorily stopping other channels to reduce connections to this FTP server.But these messages again resulted with same error.
Can someone suggest what might be the cause for this error.
Thanks in advance.

Hi ,
As I am not sure about the problem so U just try all of the option I am writing below. It may help u as these are the probable solutions for this problem.
1.perform Full CPA cache refresh using PIDIRUSER
2.The problem seems to be in establishing the connection with the File server . This could be due to
a. Wrong user name or password in receiver adapter .
b. Firewall connection are not open
actually you are saying that some files are being delivered so all the file has to be deliverd on same server on diffrent directory or all files are going on diffrent server at present I am assuming that all files are going on diffrent server so please check UID & PWD properly.if they are on same server but diff. directory it can be easily done using one Communication channel only.
3. Finally please check the errorneous communication channel .
to check your communication channels are working fine or not you can check in channel monitoring in PI7.0, adapter monitoring in Xi3.0.
if you are on PI7.0, goto RWBCache monitoring select AE and cilck disply-select the date todays--check everything is greent here
4.Please check your maximal connection pool .
Regards,
Saurabh

Com.sap.aii.adapter.jdbc.svc and com.sap.aii.adapter.jms.svc don't start

Hello,
In order to configure JMS Receiver Adapter to access Websphere Application Server 7.0, I have recently deployed file com.sap.aii.adapter.lib.sca with the following libraries:
com.sap.aii.adapter.lib_api.jar
com.ibm.ws.ejb.thinclient_7.0.0.jar
com.ibm.ws.orb_7.0.0.jar
com.ibm.ws.sib.client.thin.jms_7.0.0.jar
com.ibm.ws.runtime.jar
javax.j2ee.jms.jar
The communication channel can reach the queue but when I send a message it fails because services sap.com/com.sap.aii.adapter.jdbc.svc and com.sap.aii.adapter.jms.svc are not started.
Checking dev_server0 file I found the following error.
==============================================================================================
Service com.sap.aii.adapter.jdbc.svc start ================= ERROR =================
com.sap.engine.frame.ServiceException: Could not obtain an initial context due to a communication failure. Since no provider
URL was specified, the default provider URL of "corbaloc:iiop:1.0(at)sapdpi-lpar:2809/NameService" was used. Make sure that any
bootstrap address information in the URL is correct and that the target name server is running. Possible causes other than
an incorrect bootstrap address or unavailable name server include the network environment and workstation network configurati
on.
at com.sap.aii.adapter.jdbc.SapAdapterServiceFrameImpl.start(SapAdapterServiceFrameImpl.java:151)
at com.sap.engine.core.service630.container.ServiceRunner.startFrame(ServiceRunner.java:155)
at com.sap.engine.core.service630.container.ServiceRunner.startService(ServiceRunner.java:113)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:60)
at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:162)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:260)
Caused by: javax.naming.ServiceUnavailableException: Could not obtain an initial context due to a communication failure. Sinc
e no provider URL was specified, the default provider URL of "corbaloc:iiop:1.0(at)sapdpi-lpar:2809/NameService" was used. Make
sure that any bootstrap address information in the URL is correct and that the target name server is running. Possible caus
es other than an incorrect bootstrap address or unavailable name server include the network environment and workstation netwo
rk configuration. [Root exception is org.omg.CORBA.TRANSIENT: java.net.ConnectException: Connection refused:host=sapdpi-lpar,
port=2809 vmcid: 0x4942f000 minor code: 3586 completed: No]
at com.ibm.ws.naming.util.WsnInitCtxFactory.mapInitialReferenceFailure(WsnInitCtxFactory.java:2228)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getWsnNameService(WsnInitCtxFactory.java:1414)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getRootContextFromServer(WsnInitCtxFactory.java:944)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getRootJndiContext(WsnInitCtxFactory.java:865)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getInitialContextInternal(WsnInitCtxFactory.java:545)
at com.ibm.ws.naming.util.WsnInitCtx.getContext(WsnInitCtx.java:123)
at com.ibm.ws.naming.util.WsnInitCtx.getContextIfNull(WsnInitCtx.java:798)
at com.ibm.ws.naming.util.WsnInitCtx.rebind(WsnInitCtx.java:242)
at com.ibm.ws.naming.util.WsnInitCtx.rebind(WsnInitCtx.java:255)
at javax.naming.InitialContext.rebind(InitialContext.java:367)
at javax.naming.InitialContext.rebind(InitialContext.java:367)
at com.sap.aii.adapter.jdbc.SapAdapterServiceFrameImpl.start(SapAdapterServiceFrameImpl.java:100)
... 6 more
Caused by: org.omg.CORBA.TRANSIENT: java.net.ConnectException: Connection refused:host=sapdpi-lpar,port=2809 vmcid: 0x4942f0
00 minor code: 3586 completed: No
at com.ibm.CORBA.transport.TransportConnectionBase.connect(TransportConnectionBase.java:425)
at com.ibm.ws.orbimpl.transport.WSTransport.getConnection(WSTransport.java:436)
at com.ibm.CORBA.transport.TransportBase.getConnection(TransportBase.java:187)
at com.ibm.rmi.iiop.TransportManager.get(TransportManager.java:89)
at com.ibm.rmi.iiop.GIOPImpl.getConnection(GIOPImpl.java:120)
at com.ibm.rmi.iiop.GIOPImpl.locate(GIOPImpl.java:209)
at com.ibm.rmi.corba.Corbaloc.locateUsingINS(Corbaloc.java:307)
at com.ibm.rmi.corba.Corbaloc.resolve(Corbaloc.java:378)
at com.ibm.rmi.corba.ORB.objectURLToObject(ORB.java:3721)
at com.ibm.CORBA.iiop.ORB.objectURLToObject(ORB.java:3256)
at com.ibm.rmi.corba.ORB.string_to_object(ORB.java:3619)
at com.ibm.ws.naming.util.WsnInitCtxFactory.stringToObject(WsnInitCtxFactory.java:1524)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getWsnNameService(WsnInitCtxFactory.java:1389)
... 16 more
Caused by: java.net.ConnectException: Connection refused
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:522)
at java.net.Socket.connect(Socket.java:470)
at java.net.Socket.<init>(Socket.java:367)
at java.net.Socket.<init>(Socket.java:180)
at com.ibm.ws.orbimpl.transport.WSTCPTransportConnection.createSocket(WSTCPTransportConnection.java:270)
at com.ibm.CORBA.transport.TransportConnectionBase.connect(TransportConnectionBase.java:354)
... 28 more
Service com.sap.aii.adapter.jms.svc start ================= ERROR =================
com.sap.engine.frame.ServiceRuntimeException: Could not obtain an initial context due to a communication failure. Since no pr
ovider URL was specified, the default provider URL of "corbaloc:iiop:1.0(at)sapdpi-lpar:2809/NameService" was used. Make sure t
hat any bootstrap address information in the URL is correct and that the target name server is running. Possible causes othe
r than an incorrect bootstrap address or unavailable name server include the network environment and workstation network conf
iguration.
at com.sap.aii.adapter.jms.core.service.AdapterServiceFrameImpl.bindAdapter(AdapterServiceFrameImpl.java:171)
at com.sap.aii.adapter.jms.core.service.AdapterServiceFrameImpl.start(AdapterServiceFrameImpl.java:125)
at com.sap.engine.core.service630.container.ServiceRunner.startFrame(ServiceRunner.java:155)
at com.sap.engine.core.service630.container.ServiceRunner.startService(ServiceRunner.java:113)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:60)
at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:162)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:260)
Caused by: javax.naming.ServiceUnavailableException: Could not obtain an initial context due to a communication failure. Sinc
e no provider URL was specified, the default provider URL of "corbaloc:iiop:1.0(at)sapdpi-lpar:2809/NameService" was used. Make
sure that any bootstrap address information in the URL is correct and that the target name server is running. Possible caus
es other than an incorrect bootstrap address or unavailable name server include the network environment and workstation netwo
rk configuration. [Root exception is org.omg.CORBA.TRANSIENT: Connection state: State: ABORT (5) vmcid: 0x4942f000 minor co
de: 775 completed: No]
at com.ibm.ws.naming.util.WsnInitCtxFactory.mapInitialReferenceFailure(WsnInitCtxFactory.java:2228)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getWsnNameService(WsnInitCtxFactory.java:1414)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getRootContextFromServer(WsnInitCtxFactory.java:944)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getRootJndiContext(WsnInitCtxFactory.java:865)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getInitialContextInternal(WsnInitCtxFactory.java:545)
at com.ibm.ws.naming.util.WsnInitCtx.getContext(WsnInitCtx.java:123)
at com.ibm.ws.naming.util.WsnInitCtx.getContextIfNull(WsnInitCtx.java:798)
at com.ibm.ws.naming.util.WsnInitCtx.rebind(WsnInitCtx.java:242)
at com.ibm.ws.naming.util.WsnInitCtx.rebind(WsnInitCtx.java:255)
at javax.naming.InitialContext.rebind(InitialContext.java:367)
at javax.naming.InitialContext.rebind(InitialContext.java:367)
at com.sap.aii.adapter.jms.core.service.AdapterServiceFrameImpl.bindAdapter(AdapterServiceFrameImpl.java:163)
... 7 more
Caused by: org.omg.CORBA.TRANSIENT: Connection state: State: ABORT (5) vmcid: 0x4942f000 minor code: 775 completed: No
at com.ibm.rmi.iiop.Connection.checkEstablished(Connection.java:3091)
at com.ibm.rmi.iiop.Connection.send(Connection.java:2145)
at com.ibm.rmi.iiop.Connection._locate(Connection.java:463)
at com.ibm.rmi.iiop.Connection.locate(Connection.java:439)
at com.ibm.rmi.iiop.GIOPImpl.locate(GIOPImpl.java:219)
at com.ibm.rmi.corba.Corbaloc.locateUsingINS(Corbaloc.java:307)
at com.ibm.rmi.corba.Corbaloc.resolve(Corbaloc.java:378)
at com.ibm.rmi.corba.ORB.objectURLToObject(ORB.java:3721)
at com.ibm.CORBA.iiop.ORB.objectURLToObject(ORB.java:3256)
at com.ibm.rmi.corba.ORB.string_to_object(ORB.java:3619)
at com.ibm.ws.naming.util.WsnInitCtxFactory.stringToObject(WsnInitCtxFactory.java:1524)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getWsnNameService(WsnInitCtxFactory.java:1389)
... 17 more
==============================================================================================
Could anyone tell me why is trying to connect to "corbaloc:iiop:1.0(at)sapdpi-lpar:2809/NameService"? Do I have to configure a default provider URL for SAP PI server? If so, where I configure it? Any help will be appreciated.
Thank you in advance.
Roger Allué i Vall

Hi Roger,
we also experience the same issue and would be very keen to understand how you resolved this problem.
Many thanks.
Dieter

Com.sap.connectivity.cs.extended.connectionserver error in webi

Hi
I am getting the below error in webi.
com.sap.connectivity.cs.extended.connectionserver error in webi while running the report.
Please let us know ASAP.

We have raised SAP note for this and we got the solution.
Create new APS server and
add the following required services to the APS
"DSL Bridge Service"
"Adaptive Connectivity Service"
SAP Note for this
0001775372 Error csEx WIS 00000 when trying to create a web intelligence document
Regards
Gaurav Mang.

XA Trasaction issue with SAP JCA Adapter

Using OSB 10gR3
We have a proxy picking messages from a JMX queue using an XA enabled connection factory (the default weblogic XA connection factory). Proxy service calls a business service which is based on the SAP JCA WSDL and posts an IDOC to SAP system. A Route to node with Routing option Quality of service set as Exactly Once is used to ensure a rollback in case of errors on SAP processing. (Also tried with a service callout in request pipeline to achieve the same result).
Here are the issues we are facing
1. If the the SAP Outbound connection on iwafjca resource adapter is set as Local Transaction
When testing from console the service runs fine. When message is sent from JMS queue we get an error "Transaction already exists". This seems correct as SAP Adapter will try to create a new transaction which will be possible while running from console while when Global transaction is created by JMS queue (when Proxy picked up message from XA enabled queue) SAP Adapter will not be able to create a separate transaction being not a part of XA.
2. If SAP Outbound connection on iwafjca resource adapter is set as XA Transaction
Even the business service when tested directly from console fails in this scenario. The error we get is "XA transaction not supported by JCA adapter".
Any idea how to make the SAP JCA Adapter call a part of global transaction so that failed messages can roll back to the JMS queue?
Sorry for the long description but I thought it will make it easier :)

2. If SAP Outbound connection on iwafjca resource adapter is set as XA Transaction
Even the business service when tested directly from console fails in this scenario. The error we get is "XA transaction not supported by JCA adapter".
Any idea how to make the SAP JCA Adapter call a part of global transaction so that failed messages can roll back to the JMS queue?The interface provided by SAP (SAP JCO) doesn't support JTA transactions.So there is no way adapter/Connection factory can enlist in global transaction.
1. If the the SAP Outbound connection on iwafjca resource adapter is set as Local Transaction
When testing from console the service runs fine. When message is sent from JMS queue we get an error "Transaction already exists". This seems correct as >SAP Adapter will try to create a new transaction which will be possible while running from console while when Global transaction is created by JMS queue >(when Proxy picked up message from XA enabled queue) SAP Adapter will not be able to create a separate transaction being not a part of XA. This is known behavior and If I remember correct there is Bug raised but closed as Work as Designed (I still don't have clear explanation why adapter starts local transaction when underlying connection doesn't even participate ). Solution for this is to Make QOS=Best Effort.This makes sure that the local transaction required by adapter will not conflict with global transaction.
So if you expecting adapter to participate in global JTA currently it is not supported.
Thanks
Manoj

When i send a test message throw the RWB for Http receiver adapter it is giving the error "Error in processing caused by: com.sap.aii.adapter.http.api.HttpAdapterException: ERROR_SOCKET_TIMEOUT, Read timed out"

when i send a test message throw the RWB for Http receiver adapter it is giving the error "Error in processing caused by: com.sap.aii.adapter.http.api.HttpAdapterException: ERROR_SOCKET_TIMEOUT, Read timed out"

Hi, Michal
I have read your Weblog. It makes sense to me. Thanks a lot for your help! However, I still have some questions and listed them as following. Could you please help to answer them?
Q1: I am new to SAP-XI. So I have no idea about TCODE-SXMB_ADM. Could you introduce more details about it?
Q2: The XI system I am using is running on SAP-ICC's machine. The tools I can use are:
1.Builder for Integration Repository
2.Builder for Integration Configuration
3.System Landscape Directory
4.Runtime Workbench
5.Administration System (for Repository, Directory, Runtime)
Please note that I do not have a complete control on this SAP-XI. Do you think whether or not I can set the timeout parameter by following the instructions provided in your Weblog?
For more details about my SAP-XI, please access the following Web page:
http://iccxi.sap.com:58000/rep/support/admin/index.html
Q3: The following messages are extracted from the SAP-XI. Wish they are hepful to solving my problem.
2006-06-19 05:12:16 Success The message was successfully received by the messaging system. Profile: XI URL: http://iccxi.sap.com:58000/MessagingSystem/receive/AFW/XI
2006-06-19 05:12:16 Success Using connection AFW. Trying to put the message into the request queue.
2006-06-19 05:12:16 Success Message successfully put into the queue.
2006-06-19 05:12:16 Success The message was successfully retrieved from the request queue.
2006-06-19 05:12:16 Success The message status set to DLNG.
2006-06-19 05:12:16 Success Delivering to channel: ValidationRequestHandlerServiceChannel
2006-06-19 05:12:16 Success SOAP: request message entering the adapter
2006-06-19 05:12:37 Success SOAP: call failed
2006-06-19 05:12:37 Error SOAP: error occured: java.net.ConnectException: Connection timed out: connect
2006-06-19 05:12:37 Error Exception caught by adapter framework: Connection timed out: connect
Thanks
Menghua Li

PI 7.1 and Oracle JDBC driver: missing com.sap.aii.adapter.lib.sda

Hello,
I want to deploy the JDBC driver for Oracle databases as described in OSS 1138877 on a brand-new PI7.1 (SP06 Stack) installation. Unfortunately, I can't find com.sap.aii.adapter.lib.sda on the system, so I can't add the ojdbc14.jar file and deplay it using JSPM.
Where can I get it from?
Thank you and best regards,
Herwig

hey,
The JDBC driver installation is different for PI 7.1.
The dowload/modify/deploy .sap.aii.adapter.lib.sda method was used in the earlier versions.(mentioned in the How to guides)
Look at the SAP documentation below -
http://help.sap.com/saphelp_nwpi71/helpdata/en/cf/128a42f802a01ae10000000a155106/frameset.htm
Arvind R

HAL - SAP Connection Adapter

Similar Messages

Maybe you are looking for