Handle multi attachments

Have any1 wrote an adapter module to handle multi attachments in mail adapter? or managed to solve the issue that XI handles only 1 attachemnt
thx
Shai

Have u seen this
/people/sravya.talanki2/blog/2006/01/12/xi-triggering-e-mails-with-multiple-attachments--problems
Regards,
Prateek

Similar Messages

How to handle multiple attachments in XI mail sender adapter?

Hi,
is it possible to handle multiple attachments in a mail receiving in XI?
Our customer wants to send us mails with multiple attachments and we have to convert each attachment to an idoc.
But as I know XI (receiving mails) can handle only a single attachment in a mail. Is it true?
Any ideas?
Thanks a lot!
Regards
Wolfgang

Hi Wolfgang,
Well, although I have never tried a scenario of picking more than two attachments from one mail, I wonder if its possible in the first place!
Here are the reasons why I think it is possible:-
It is not mentioned anywhere in the SAP Notes for mail adapter that it is not possible.
*It is not mentioned anywhere in the SAP help documentation that it is not possible
*Also, I think if the receiver mail adapter can create more than one attachment, the sender should be able to pick more than one!:)
Have you tried defining a PayloadSwapBean module to pick up more than one attachment?
Just try experimenting with this particular part of the module code:-
Content-Disposition: attachment;filename="MailAttachment-1.xml"
Content-Description: MailAttachment-1
I think even the following weblog might be able to help you to a certain extent:-
"Receiving E-Mail and processing it with ABAP - Version 610 and Higher" - /people/thomas.jung3/blog/2004/09/09/receiving-e-mail-and-processing-it-with-abap--version-610-and-higher
Regards,
Sushumna
Regards,
Sushumna

How does IDP handle multi-value attributes in directory?

I have a directory referenced by the IDP where the mail attribute is multi-value. Assertions being received by the SP are indicating that the mail attribute is null or empty. How does the Oracle IDP handle multi-value attributes from a directory? Is there a way to select the first entry in an array of multi-values?

On the IdP side, passing of multi-valued attributes is supported. Read this section:
http://download.oracle.com/docs/cd/E10773_01/doc/oim.1014/b25355/configuring.htm#BCGCGFCJ
Snippet (under 'Delimited Data'):
"In addition to supporting and passing multi-valued attributes, Oracle Identity Federation can also support delimited data to provide multiple values for assertion attributes ......"
This information is also available on the OIF screen for 'Add Assertion Profile'.
On the SP side, mapping a multi-valued assertion attribute to a local user attribute is NOT supported. Read this section:
http://download.oracle.com/docs/cd/E10773_01/doc/oim.1014/b25355/configuring.htm#BCGGEAEA
Snippet (under Submit/Reset button):
"Note: Mapping an assertion attribute containing multiple values to a local user is not supported."
So, basically, there is no way to send only the first value of an LDAP attribute.
-shetty2k

Best way to handle multi-page documents?

Hi,
I'm creating a multi-page editor on top of TLF and I'd like to hear some opinions about the best way to handle multi-pade documents.
I'm basicaly considering two options:
1.) A single RichEditableText and several ContainerControllers.
2.) Several RichEditableText.
Tks.

I'm not sure you can create a RichEditableText and give it multiple ContainerControllers. If you use multiple RichEditableText
components, then you will have to decide in advance which text goes in which one.
We have posted sample code for doing this in straight ActionScript, which you could presumably also host inside a Flex container. See:
http://blogs.adobe.com/tlf/examples/
Look for "ActionScript Pagination Example".
- robin

Handling multi byte languages in Web Service

Hi,
I am calling a web service and its working fine with English language i.e web service is returning correct parameters with English.
But it's returning me Junk characters when i call web service with multi byte languages like Japanese, Russian etc.,
Generally while configuring Web Service or calling a web service using proxy - it asks for a user id/ Pwd but not a logon language (unlike while you login SAP it asks for Logon Language) so i am thinking since there is no option to enter log on language, its taking a default language i.e English so when i am passing japanese its returning me Junk Values.
Can any one please help me with this? How to handle multi byte webservice call? I am using ECC 5.0.
Thanks & Regards,
Pavan.

I appreciate your thought but our webservice must be able to handle multiple languages not only Japanese. Users might call webservice in any language they prefer. If i change it my default to Japanese, i will have problem when users call webservice in Russian.

SQL 2008 Trigger to handle multi rows scenario

I have created below trigger to start logging the company changes from the table1 into another audit table. It works fine with single row but crashing with identical change with multiple rows. Can you please help me to update the trigger to handle multi-row
scenario. Thanks.
GO
IF
NOT EXISTS
(SELECT
* FROM sys.objects
WHERE object_id
= OBJECT_ID(N'[dbo].[Company_AuditPeriod]')
AND type
in (N'U'))
CREATE
TABLE [dbo].[Company_AuditPeriod](
      [Client] [varchar](25)
NOT NULL,
      [Period] [varchar](25),
      [Table_Name] [varchar](25),
      [Field_Name] [varchar](25),
      [Old_Value] [varchar](25),
      [New_Value] [varchar](25),
      [User_ID] [varchar](25)
      [Last_Update] [datetime],
      [agrtid] [bigint]
IDENTITY(1,1)
NOT NULL,
ON [PRIMARY]
GO
--create trigger
SET
QUOTED_IDENTIFIER ON
GO
CREATE
TRIGGER [dbo].[Table1_Update]
ON [dbo].[Table1]
FOR
UPDATE
NOT
FOR REPLICATION
AS
BEGIN
DECLARE
      @status
varchar(3),
      @user_id
varchar(25),
      @period
varchar(25),
      @client
varchar(25),
      @last_update
datetime
DECLARE
      @Old_status
varchar(3),
      @Old_user_id
varchar(25),
      @Old_period
varchar(25),
      @Old_client
varchar(25)
SELECT
      @status
= status,
      @user_id
= user_id,
      @period
= period,
      @client
= client,
      @last_update
= last_update
FROM Inserted
SELECT
      @Old_status
= status,
      @Old_user_id
= user_id,
      @Old_period
= period,
      @Old_client
= client
FROM Deleted
If @Old_status <> @status
INSERT INTO Company_AuditPeriod
VALUES ( @client, @period,
'Table1',
'period',@old_status, @status, @user_id, @last_update)
END
GO

Sorry for the confusion.
I just made sure the table name is same in sys.objects statement and create table statement (there was a typo)
IF
NOT EXISTS
(SELECT
* FROM sys.objects
WHERE object_id
= OBJECT_ID(N'[dbo].[Company_AuditPeriod]')
AND type
in (N'U'))
CREATE
TABLE [dbo].[ Company_AuditPeriod](
Earlier you created Trigger on Company_AuditPeriod but
We have to create trigger on Table1 please with multi row scenario. Thanks.
--Company_AuditPeriod DDL
GO
IF
NOT EXISTS
(SELECT
* FROM sys.objects
WHERE object_id
= OBJECT_ID(N'[dbo].[Company_AuditPeriod]')
AND type
in (N'U'))
CREATE
TABLE [dbo].[ Company_AuditPeriod](
      [Client] [varchar](25)
NOT NULL,
      [Period] [varchar](25),
      [Table_Name] [varchar](25),
      [Field_Name] [varchar](25),
      [Old_Value] [varchar](25),
      [New_Value] [varchar](25),
      [User_ID] [varchar](25)
      [Last_Update] [datetime],
      [agrtid] [bigint]
IDENTITY(1,1)
NOT NULL,
ON [PRIMARY]
GO
--Table1 DDL
CREATE TABLE [dbo].[Table1](
[bflag] [int] NOT NULL,
[client] [varchar](25) NOT NULL,
[copies] [int] NOT NULL,
[cost_bio] [decimal](28, 8) NOT NULL,
[cost_cpu] [decimal](28, 8) NOT NULL,
[cost_dio] [decimal](28, 8) NOT NULL,
[date_ended] [datetime] NOT NULL,
[date_started] [datetime] NOT NULL,
[description] [varchar](255) NOT NULL,
[expire_days] [int] NOT NULL,
[func_arg] [varchar](255) NOT NULL,
[func_id] [int] NOT NULL,
[ing_status] [int] NOT NULL,
[invoke_time] [datetime] NOT NULL,
[last_update] [datetime] NOT NULL,
[mail_flag] [tinyint] NOT NULL,
[me_mail_flag] [tinyint] NOT NULL,
[module] [char](3) NOT NULL,
[order_date] [datetime] NOT NULL,
[orderno] [int] NOT NULL,
[output_id] [int] NOT NULL,
[poll_status] [char](1) NOT NULL,
[printer] [char](16) NOT NULL,
[priority] [char](1) NOT NULL,
[priority_no] [int] NOT NULL,
[process_id] [int] NOT NULL,
[report_cols] [int] NOT NULL,
[report_id] [varchar](255) NOT NULL,
[report_name] [varchar](25) NOT NULL,
[report_type] [char](1) NOT NULL,
[server_queue] [char](12) NOT NULL,
[status] [char](1) NOT NULL,
[step_id] [char](8) NOT NULL,
[system_name] [char](8) NOT NULL,
[used_bio] [int] NOT NULL,
[used_cpu] [int] NOT NULL,
[used_dio] [int] NOT NULL,
[user_id] [varchar](25) NOT NULL,
[variant] [int] NOT NULL,
[agrtid] [bigint] IDENTITY(1,1) NOT FOR REPLICATION NOT NULL,
CONSTRAINT [PK_acrrepord001] PRIMARY KEY NONCLUSTERED
[agrtid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON, FILLFACTOR = 90) ON [INDEX]
) ON [PRIMARY]
G0<o:p></o:p>
--create trigger
SET
QUOTED_IDENTIFIER ON
GO
CREATE
TRIGGER [dbo].[Table1_Update]
ON [dbo].[Table1]
FOR
UPDATE
NOT
FOR REPLICATION
AS
BEGIN
DECLARE
      @status
varchar(3),
      @user_id
varchar(25),
      @period
varchar(25),
      @client
varchar(25),
      @last_update
datetime
DECLARE
      @Old_status
varchar(3),
      @Old_user_id
varchar(25),
      @Old_period
varchar(25),
      @Old_client
varchar(25)
SELECT
      @status
= status,
      @user_id
= user_id,
      @period
= period,
      @client
= client,
      @last_update
= last_update
FROM Inserted
SELECT
      @Old_status
= status,
      @Old_user_id
= user_id,
      @Old_period
= period,
      @Old_client
= client
FROM Deleted
If @Old_status <> @status
INSERT INTO Company_AuditPeriod
VALUES ( @client, @period,
'Table1',
'period',@old_status, @status, @user_id, @last_update)
END
go

DIME format for handling SOAP attachments

Hi all,
There is a proposal (I think by Microsoft) called the Direct Internet Message Encapsulation (DIME) format to handle SOAP attachments. This is a binary format which defines how to construct a single message with multiple payloads and it is suppose to be more efficient that MIME especially for large attachments.
Does anybody know the status of this proposal?
Thanks,
Ken

Hi, I'm also looking for a DIME java implementation,
let me know if you find something
maybe we will develop it ourselves

Handling streaming attachments in Client Proxy

I'm no java programmer in any shape or form so I'm really struggling with a web service that I've created that utilizes streaming attachments. THe OEM test web page returns the attachment perfectly well in the SOAP response but I'm unable to harness the Java to deal with it in the client proxy code.
I created a proxy using the wsa command line utility but there is some java expertise required to code the 'main' class. Does anyone have an example of java code that takes the 'oracle.webservices.attachments' and returns it in a useful form to a calling application? In essence, what I'm looking to do is to call the proxy from pl/sql, and return the attachment as a CLOB.
Does anyone know of any examples of proxy java code handling this type of thing?

I've managed to create a proxy that saves the streaming attachment to a local directory (thanks to the info at this post: Re: Streaming Attachments
The problem I have is that I have to hardcode parameters into the HttpSoap11Client code like this:
public static void main(String[] args) {
try {
getxmlweb.proxy.HttpSoap11Client myPort = new getxmlweb.proxy.HttpSoap11Client();
System.out.println("calling " + myPort.getEndpoint());
// Add your own code here
String pResId = null ;
String pFileName= null;
String pFilterStr = "sepa_region='North'";
String fileName = "/tmp/plain1.txt";
AttachmentFactory factory = AttachmentFactory.newInstance();
Attachments atts = factory.createAttachments();
myPort.getClob(pResId,pFileName,pFilterStr, atts);
The last line here is the call to the method that creates the response, I need to pass parameters to this call DYNAMICALLY. I've tried setting up parameters in the 'public void main' signature but it doesn't compile telling me it must be public static void main(String[] args). This is where my lack of JAVA skills are letting me down.
Can anyone see a way around this?

Handling Multi-byte/Unicode (Japanese) characters in Oracle Database

Hello,
How do I handle the Japanase characters with Oracle database?
I have a Java application which retrieves some values from the database; makes some changes to these [ex: change value of status column, add comments to Varchar2 column, etc] and then performs an UPDATE back to the database.
Everything works fine for the English. But NOT for Japanese language, which uses Multi-byte/Unicode characters. The Japanese characters are garbled after the performing the database UPDATE.
I verified that Java by default uses UTF16 encoding. So there shouldn't be any problem with Java/JDBC.
What do I need to change at #1- Oracle (Database) side or #2- at the OS (Linux) side?
/* I tried changing the NLS_LANG value from OS and NLS_SESSION_PARAMETERS settings in Database and tried 'test' insert from SQL*plus. But SQL*Plus converts all Japanese characters to a question mark (?). So could not test it via SQL*plus on my XP (English) edition.
Any help will be really appreciated.
Thanks

Hello Sergiusz,
Here are the values before & after Update:
--BEFORE update:
select tar_sid, DUMP(col_name, 1016) from table_name where tar_sid in ('6997593.880');
/* Output copied from SQL-Developer: */
6997593.88 Typ=1 Len=144 CharacterSet=UTF8: 54,45,53,54,5f,41,42,53,54,52,41,43,54,e3,81,ab,e3,81,a6,4f,52,41,2d,30,31,34,32,32,e7,99,ba,e7,94,9f,29,a,4d,65,74,61,6c,69,6e,6b,20,e3,81,a7,e7,a2,ba,e8,aa,8d,e3,81,84,e3,81,9f,e3,81,97,e3,81,be,e3,81,97,e3,81,9f,e3,81,8c,e3,80,81,52,31,30,2e,32,2e,30,2e,34,20,a,e3,81,a7,e3,81,af,e4,bf,ae,e6,ad,a3,e6,b8,88,e3,81,bf,e3,81,ae,e4,ba,8b,e4,be,8b,e3,81,97,e3,81,8b,e7,a2,ba,e8,aa,8d,e3,81,a7,e3,81,8d,e3,81,be,e3,81,9b,e3,82,93,2a
--AFTER Update:
select tar_sid, DUMP(col_name, 1016) from table_name where tar_sid in ('6997593.880');
/* Output copied from SQL-Developer: */
6997593.88 Typ=1 Len=144 CharacterSet=UTF8: 54,45,53,54,5f,41,42,53,54,52,41,43,54,e3,81,ab,e3,81,a6,4f,52,41,2d,30,31,34,32,32,e7,99,ba,e7,94,9f,29,a,4d,45,54,41,4c,49,4e,4b,20,e3,81,a7,e7,a2,ba,e8,aa,8d,e3,81,84,e3,81,9f,e3,81,97,e3,81,be,e3,81,97,e3,81,9f,e3,81,8c,e3,80,81,52,31,30,2e,32,2e,30,2e,34,20,a,e3,81,a7,e3,81,af,e4,bf,ae,e6,ad,a3,e6,b8,88,e3,81,bf,e3,81,ae,e4,ba,8b,e4,be,8b,e3,81,97,e3,81,8b,e7,a2,ba,e8,aa,8d,e3,81,a7,e3,81,8d,e3,81,be,e3,81,9b,e3,82,93,2a
So the values BEFORE & AFTER Update are the same!
The problem is that sometimes, the Japanese data in VARCHAR2 (abstract) column gets corrupted. What could be the problem here? Any clues?

Handling multi-value parameters in VS 2005 / Crystal 2008

In my program I am trying to handle a multi-value parameter using the following code, passing it an array of type string with the values that the user selected, but using the following code returns a 'Missing parameter values' error.
    For Each crParameterFieldDefinition In crParameterFieldDefinitions
        If Not crParameterFieldDefinition.IsLinked And crParameterFieldDefinition.ReportName = "" Then
            crParameterValues = crParameterFieldDefinition.CurrentValues
            crParameterDiscreteValue = New ParameterDiscreteValue
            If crParameterFieldDefinition.EnableAllowMultipleValue Then
                Dim j As Integer
                Dim x() As String = Session("FieldDef")
                For j = 0 To x.GetUpperBound(0) - 1
                    crParameterDiscreteValue.Value = x(j)
                    crParameterFieldDefinition.CurrentValues.Add(crParameterDiscreteValue)
                Next
            End If
            Session.Remove("FieldDef")
            i = i + 1
        End If
    Next
I have also tried loading the values into a ParameterValues object and then using ParameterFieldDefinition.ApplyCurrentValues on it, which has been working fine for all of my single value inputs, but using that throws an error about a type mismatch. Any help at all would be appreciated.

There are a few samples to look at here:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
Vbnet_win_paramengine.zip, vbnet_win_multirangeparam.zip and vbnet_win_rangeparameters.zip may be good
Also, [this|http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23?quicklink=index&overridelayout=true] article has great info.
This is all assuming you are on SP3 for CR2008:
https://smpdl.sap-ag.de/~sapidp/012002523100009989492010E/cr2008_sp3_fullbuild.zip
SP 3 msi
https://smpdl.sap-ag.de/~sapidp/012002523100007123592010E/cr2008sp3_redist.zip
SP 3 msm
https://smpdl.sap-ag.de/~sapidp/012002523100007123582010E/cr2008sp3_mm.zip
Ludek

How to handle multi valued attributes

Hi All,
I am supposed to populate multivalued attributes for a field in oim resource profile. Lets assume the field is mailbox. The issue is that I am supposed to reconcile this field from the directory server during initial load. The mailboxes are fetched from the DS based on organization. For provisioning I have to get the mailboxes from the database and these mailboxes are based on the role a user has. At the time of provisioing, I am supposed to populate the mailbox field with values the user already has been provisioned with and also display the mailboxes that he can get access to. I have created the mailbox as a resource with id and name as two of its fields. Could someone please tell me how do I handle this?
Thanks,
Supreetha

I am not sure if I could follow the same thing as mentioned in the link above. Here is my case, Role is a multi valued attribute which i need to handle in oim and is very different from the usual roles. For this purpose, I have created roles as a resource object with role_id as field in its process form.When an admin logs in to assign a new role_id, he should be able to see only those roles for assignment that the admin's org has. I have these org and role mappings in a custom table that I have created in the oim schema. How will I able to display only these available role_ids so that the admin can choose them and assign for the role resource.
Could you please let me know how do I do the config in oim?
Thanks,
supreetha
Edited by: Supreetha on Nov 13, 2010 2:54 AM

Computer can't handle multi cam?

I am new to Premiere Pro CC, I have only been using it almost two days. I come from years of Final Cut Pro. Here is the issue:
     If I have 8 high quality camera takes, like a music video, and I want to edit it by doing it with multi-cam, obviously, even though I have a powerful computer, it's not powerful enough to handle 8 camera's of really large footage.
     Now, in Final Cut Pro X, this was easy. All I had to do was select the files I wanted in multi-cam and click, "Create Proxy Media," then I had to click, "Play proxy media and not original," in preferences. I edited the video, then when I was finished and wanted to export, all I had to do was go back to the preferences, uncheck, "Play proxy media," and the multi-cam would automatically now be switched to the original media, not the proxy media. Thus, exporting the high quality files.
    I have looked at tutorials and around the internet, I cannot find how to go about this in Premiere Pro CC. I know how to create the multi cam in Premiere Pro CC but as I said, I'm not going to be able to play it back.
     So, how do I create small play back footage such as proxies, and then turn that off when I'm ready to export and have it replaced with the original footage?

yes, you can try to relink to the originals when time to export. most of the time it will relink fine, but once in a while it goes haywire. the relink doesn't work when swapping out certain different media types, so best to test it all out first before getting stuck with a bad relink after editing is done.
using preview renders is limited, if you apply any effects to the footage it will have to make new preview renders, vs applying effects to a proxy file that wont need to be re-rendered. so its sorta easier just to do it once as proxy and not have to fight preview renders, or worry about the lost preview render bugs.

Handling Multi-Valued attribute in trusted reconciliation

Hi,
We have a requirement where an attribute is multi-valued in LDAP(Sun One Directory Server) which is a trusted source for OIM. We wanted to use oracle Out-of-the-Box connector for Sun Java System Directory Server. We wanted to bring in this multi-valued attribute into OIM, concatenate everything and populate it to a OIM User form attribute. Hence though the value is multi-valued in trusted source, we process it and populate as a single valued attribute in OIM. Since we run trusted reconciliation we are unable to bring this multivalued attribute for the user into OIM.
Can anybody suggest any other workaround available to achieve this functionality without touching connector source code?
Any help would be greatly appreciated.
Regards
Deepa

I would highly suggest writing your own custom code.
You'll need to create a UDF that is large enough to handle your concatenated value. A resource object marked as trusted object. A provisioning process defintion to map the value to the field.
Then write a custom scheduled task that will connect to the LDAP directory, perform your search using the modifytimestamp attribute to get all the values. Concatenate them together in your code and create the reconciliation event.
It will turn out to be smoother than dealing with an entity adapter that runs everytime an event occurs which might not be related to this item.
-Kevin

How to handle Multiple attachments in sender Mail Adapter

Hi,
In our requirement is mutiple documents send through mail adapter, In custom java module we read the each document details and do it bussiness process. But now i am not able to read the multiple files at a time. we are able to read single file only. So plz give the solution for that.
1) How to send multiple attachments(like word, PDF, JPG etc..) using mail apapter.
2) How to read multiple attachments in custom java module.
Thanks & Regards
Vijay

Hi Vijay,
Go through this weblog this explains steps to multile attachments.
/people/sravya.talanki2/blog/2006/01/12/xi-triggering-e-mails-with-multiple-attachments--problems
Regards,
Ashwin.

Questions on Handling Multi-Channel Audio

Hi there,
I'm an Editor at a news shop that has been running FCP 7.0.3 for a good length of time now. Everyone loves it, I love it - however I understand it is becoming dated and eventually we will need to upgrade to a new NLE if we want to stay up to par with latest codec support for new cameras and simple process enhancements (64bit, background rendering, etc.)
FCPX is one of several options we're trying out, and I have been toying around with the Trial version, seeing the workflow, cutting VO/SOTs and Packages on it.
The 'new' workflow does not bother me at all, I think there are a lot of enhancements that come with X, despite it seeming foreign to the FCP7 loyalists like myself. However, one thing I'm not quite sold on (or understanding of) yet is multichannel audio. So I'd like to ask a few questions regarding that if anyone would be willing to loan some tips. As a preface here's how we handle audio:
Ch1 - Wireless audio (stick mic, lav)
Ch2 - Shotgun mic (usually for natural sound)
Ch 3 / 4 - Usually copies of 1/2 but at Auto volume.
1.) Is there a quicker way to make detached / split audio channels a default state?
- I understand that I can take a clip and detach the audio, and then after that, take it one step further and expand the tracks to see all 4 audio tracks on the timeline. However, that doesn't seem like a very efficient way to go about viewing all 4 tracks (or at the very least the 2 main tracks) if I need to select all and take 2 actions to see them.
2.) What is the best way to 'bring in' only the channels I want to the timeline?
- Right now the best method I've found has been to select the clip in the browser, deselect the Audio channels I don't want in the inspector, and then make the necessary edit. Maybe in theory I could Select All clips in browser and globally change active tracks? I equate this to disconnecting A/V tracks in FCP7. Is this the best way to handle this?
3.) Is there a way to designate channels for export?
- Since there aren't really any 'tracks' in FCPX, it's hard for me to understand what audio goes where on the way out. Usually on our exports, Ch 1 will be dialogue (reporter track, sound bytes, etc.) and Ch 2 will be nat sound. This makes it easy for editors to re-cut from previously edited elements. How do I even go about assigning this? Do channels keep their position (ie. if I dropped in Ch 2 audio from the camera, does that simply NEED to export to Ch 2 on the output?)
That's about it - although if anyone is particularly passionate about the subject I'd also ask what they think about how all of this - if this is an audio workflow that when learned, can be better... OR if you feel it is a step backwards from other NLEs like FCP7, Avid, etc.
I would appreciate any and all answers regarding this. Thanks for your time!

1. Not a great fan of detaching audio except in multicam clips. Generally I'd suggest using the expand audio components function to access the channels.
2. Yes. Switch off the auto tracks in the browser and only turn them back on for the clips you need in the project. With expanded audio components, if you turn the channels back on they will reappear in the timeline.
3. You use roles for this. I know time is tight for news, but taking a few moments to assign roles to the clips in the borwser, which you can do in globally, will allow you to export with separate tracks.

Handle multi attachments

Similar Messages

Maybe you are looking for