Handle Sapscript text

Hi:
I have a Sapscript divided in three parts, vertical. In the second division y have to put a dynamic text. When the text is too long is write in the third part of the formular. Is there a way to handle this via Sapscript???or do I have to handle this by ABAP????
Some clue is great. Thanks

Hi,
The best way would be using abap.
Use program block before these text elements, Process the dynamic text here then divide the output if required.
regards
austin

Similar Messages

Need help on how to handle zip & text/csv as a resposne payload from Concur RestWebservice

Hi All,
We are getting zip(if there are multiple files) and test/csv(single file) as a response payload from the concur rest API and need your help on how to handle in NWBPM and SAP PO.
Zip response coming in response looks like below -
PKÀ˜F7extract_attendee_detail_p0600908soav_20150424022159.txts� rt©1204Õ50Ñ52©1¨áåPKzà@ÆPKÀ˜F2extract_CES_SAE_v3_p0600908soav_20150424022148.txts� rt©1204Õ50Ñ52©1¨©1ãåPKåëŠŸPKÀ˜Fzà
Text/csv response looks like below -
Extract|2015-24-40|20|0
Need you help on how to handle the zip content response.
Also need help on how to handle when text/csv response comes and when zip response comes.
As per the scenario, there are 4 calls to be made and we are using NWBPM and in the last call the actual respons (text/csv or zip) will come.
Please provide your inputs.
Thanks
Narayanareddy B

Hi Aaron,
Thanks for your reply.
I tried with Payload zip bean and the java mapping as mentioned in the response mapping of OM.
Payload zip bean - Zip zip.mode unzip
I am getting the error below in the receiver rest channel -
"Transmitting the message using connection JPR failed, due to: com.sap.aii.af.lib.mp.module.ModuleException: Zip: error occured during processing: java.util.zip.ZipException: invalid stored block lengths"
Java Mapping - used the java mapping in the response of Operation mapping
Here also i am seeing the same error in the channel log as it is synchronous step and the message got cancelled.
"Transmitting the message using connection JPR failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error encountered while executing mapping: com.sap.aii.af.service.mapping.MappingException: Mapping failed in runtimeApplication mapping program com/equalize/xpi/esr/mapping/java/UnzipAndAttach throws a stream transformation exception: Exception: invalid stored block lengths"
The below is the response i am seeing and is it proper zip response payload(any encryption) , kindly advise.
PKâE�F:ws_extract_attendee_detail_p0600908soav_20150424083413.txts� rt©1204Õ50Ñ52©1¨áåPKzà@ÆPKâE�F5ws_extract_CES_SAE_v3_p0600908soav_20150424084014.txtíTß��@~oÒÿ�÷Fº»ìV}ëòCÏz Qljß8ÜöL�`N�ùão8�Ò«�´M�Ü@�awvçûfgÇùâÏ¤å#Ttï0Ø�B�²·olÇ�£[4Ï](L�]«�ÑbÀôÁÒc�0ÀÏdAªÙÐ¢¨Ìû�Êv¡�b¤eJA%��=Þ7Í>PÚ=í2��7ò[�¼¡=q/°¶�*ø)
K|<`BgÉÔºÜWs[§J�&Ñ:Ìá:´�ç«�RÐv�ÚÅAD'\�ÁtR²*DP3gî:B@JëhU�Ò'¬�ùQ\�È\D{·O×±JS\ï�-ò�¸�Þ²êó�{Å¡2®â,MmÉù XAzßüBn&®Sl-§�l¶A�×ú½³ÙFI®0¿©Ú¯¤�oT�iV²RÀJ��¼«`õ»�í Ûéwa#�àpY�««óq)U°JaøÁA�ûì>Ù³üHåÒe¾�7��Ð/§£u°Nzã÷ç4×·èãþ�¾}õ0ÙµYÄ�+J��eX\�E±ïsR%®yÜÕðsªáÚ$qÚÎÇ�Û$^%1¸AF*ý¶VÑêxÏZÏ¢U½T~Ñ®ØkW5ç×®õ¿w5¬zò:oN»�ô��íø÷úÛÙ=¬å�[ôÚ�þmczPKhÏ��i PKâE�Fzà@Æ:ws_extract_attendee_detail_p0600908soav_20150424083413.txtPKâE�FhÏ��i 5�ws_extract_CES_SAE_v3_p0600908soav_20150424084014.txtPKËö
Thanks
Narayanareddy B

Handling RICH TEXT content on BI publisher report

Hello,
I have requirment where I have to handle RICH TEXT content, and show data in report with RICH TEXT formating.
The RICH TEXT content(with tags) is comming from database CLOB column. Here is the sample XML data.
<?xml version="1.0" encoding="UTF-8" ?>
- <DATA_DS>
- <G_1>
<ID>1</ID>
<RICH_TEXT_DATE>'<p' class="MsoNormal" style="MARGIN: 0in 0in 0pt; mso-line-height-alt: 1.15pt">'<span' style="FONT-FAMILY: Arial Narrow,sans-serif; mso-bidi-font-family: bold; Tahoma">'<font' size="3">Testing data for rich text '</font'>'</span'>'</p'></RICH_TEXT_DATE>
</G_1>
</DATA_DS>
Report Output should be below with all the formating:-
Testing data for rich text So, how to get above output with all formating, Please let me you soultions.
I am using, Oracle BI Publisher desktop version 11.1.1.5
Thanks in advance.
San.

https://blogs.oracle.com/xmlpublisher/entry/html_in_xml_support
http://docs.oracle.com/cd/E23943_01/bi.1111/e22254/create_rtf_tmpl.htm#CHDCEEIJ
Rendering HTML Formatted Data in a Report : are not being parsed

Is it possible to handle formatted text actions(RTF) using Clipboard?

Hi All,
Is it possible to handle formatted text actions(RTF) using Clipboard?
My application requires to copy the contents from other applications like MS-Word and contents to be pasted in my Application..
if so how?i appreciate for any piece of code or links to the same.
Thanks and regds
Mohan

-Any Suggestions?

SAPscript texts

Hi there,
I have some SAPscript texts which are displayed on my Adobe form. This works fine.
But when I use formats in the SAPScript texts (e.g. example), the text is not formatted in my text field.
Is there a way to solve this?
I chose XHTML for the data format of the text field, but it doesn't work...
Regards,
Eddie.

Hello,
i have nearly the same problem. I migrated a smartform to Adobe.
Most of the texts in the document are included as Sapscript standard text.
The style field is set. And i tried several style names, because i copied the style name used to create the standard text in transaction so10 to a smartform style with the same name, but formatting doesn't work.
Is there something i forgot to consider?
Regards

Cannot handle type text/html

I created a PDF in Acrobat 8, and did some editing in LiveCylce. The link buttons all work in LiveCycle preview mode. I saved in edit mode. Buttons that have a http link don't work, and I get an error message, "cannot handle type text/html"
The 'link to' website pages are spelled/entered correctly, the website/page that I want the links in this PDF form are 'up and running' just fine - what does this mean, how do I fix it?

I was using the 'http submit' button. I thought that meant when the person clicked on that button, which had a URL assigned to it, that it would take them out to (the web site page you wanted them to arrive at). Throw a bone, what am I supposed to use??

Importing standard SAPScript text - not asking for transport request!

Hi!
I tried to import some standard SAPScript text running program RSTXSCRP.
Everything was fine, but I was not asked for package and for a transport request... is it ok?
How can I send this standard text to Quality system?
Will reward,
Mindaugas

You can use program : RSTXTRAN
Navigation -> goto SE38 -> enter RSTXTRAN -> execute ->
Name of correction -
text key -object - TEXT
text key- name - enter standard text name
Text id - ST
Text key language - EN
execute now -> select text here -> enter -> now click on push button trsfr texts to corr -> you will get pop up window( request)
Thanks
Seshu

Convert SAPScript text linse to normal stream text format

Hi Gurus.
We have a custom popup FM that displays text lines from a file provided by SAPScript text format.. (after u2018call function u2018READ_TEXTu2019).
However, for example, the Tab indent markers in this text u2013 represented by two commas u2018,,u2019 are printing instead of spaces representing the indent in our popup.
We are searching a FM that takes the SAPScript text format and converts it to plain text format (before our Z_popup is called) where the Tab markers are replaced by spaces (in our case this is four spaces for each Tab mark).
We have already tried FMu2019s: CONVERT_text; CONVERT_ITF_TO_STREAM_TEXT; CONVERT_ITF_TO_STREAM_TEXT. But none of them seem to fulfill the requirements stated above.
Can anyone please advice?

Hi Arnie,
Instead of searching for FM you can manually code which is flexible.
"after gettting text from READ_TEXT in lt_tline.
Data: lt_string type table of string,
         lv_string type string.
CONSTANTS: c_par TYPE char2 VALUE ',,'. " Sign for tabs
LOOP AT lt_tline INTO wa_tline.
       CONCATENATE lv_string wa_tline-tdline INTO lv_string SEPARATED BY ' '.
       REPLACE ALL OCCURRENCES OF c_par   IN lv_string WITH ' '.
        Append lv_string to lt_string. "if needed in string table
ENDLOOP.
Regards,
Kiruba

SapScript text symbol trucates in Email

Hi All,
I have created sapscript and using variable &var1& and some text. I am sending the sapscript via email but when I get it in outlook, I get truncated value of the variable.
for eg. I am initializing the variable to
var1=http://host:80/scripts/ZMAB/!?MGR=USXXXXXXX&MBJ=678900909090909&BRW=Y&~OKCODE=EXEC
When I get email, I get only
http://host:80/scripts/ZMAB/!?MGR=USXXXXXXX&MBJ=678900909090909&BRW=Y
Any help is appriciated
Thanks
NB

user.java wrote:
Java Mail not showing (TM) Trademark sysmbol in the email contentI'm not sure what you mean by "Java Mail". If you are referring to the Java Mail API I recommend you ask on the JavaMail forum:
http://forums.sun.com/forum.jspa?forumID=43
Regards,
Shane.

Handling external text files

Hi experts!
Would you give me some advice to find the best way for handling the situation below?
Suppose I have a measuring system with 100 sensors. The measuring system can provide the measured values (with timestamp) through a simple text file (large amount of datas - one measuring session gives ~25,000 rows. The next session generates a new file: eg. data0001.csv, data0002.csv...).
Suppose, this file will be deposit:
A) somewhere on the db server (10g);
B) somewhere on the data collector PC.
The task is a data visualization on the datas already inserted into db table with Oracle ApEx. A package has to perform the observation of the new data files, the data insertion (and the visualization of course, but that I can manage).
Would you be so kind to help finding the shortest way for this?
What is the best practice (external table, sql*loader, utl_file...) for case A) and B), to create a "new data file listener" and "new data insertion" method?
Thanks, ML

user8353169 wrote:
Would you be so kind to help finding the shortest way for this?Not sure what you define as the "+shortest+" way - but the best way would be not to write to files, but to write the sensor data directly into the database.
The reasons are performance and scalability. One of the slowest operation we always had and still have on computer systems is I/O.
Let's say you need to process 6GB of sensor data per hour. Thus you will have 6GB worth of I/O per hour. This data then needs to be read (another 6GB I/O) and loaded (another 6GB written) into Oracle - where it is also indexed (more I/O) and processed (likely you will have reporting tables or materialised views for your Apex reports - and this also needs I/O).
Simply getting the data into the database using this method is 18+ GB I/O for 6 GB data. How well does this solution perform and how well does it scale when it has an I/O to data ratio of 3:1?
Thus the better option is to write that 6GB/hour of sensor data directly into the database. And not to go the write-to-file and then load-from-file approach. A single client process (collecting sensor data) can easily write over 1MB/sec (2000+ rows/sec) into the database (based on my experience doing a similar type of thing). Of course - table type, indexes, triggers and so on impacts insert performance.
The advantage of streaming the data directly into Oracle is, besides the reduction in total I/O, that the sensor data is almost immediately available for reporting and processing. Depending on the row/sec created, you may want to have the client commit every 10 to 60 seconds. Immediately after such a commit the database processes can access this data - process it for alarm notification, real-time reporting, aggregate it for a reporting data layer and so on.
Doing this via text files instead.. I do not see any advantage in it. The best place for data is inside the database. Not outside. The sooner and faster the data can be put into the database, the better.

No handles on Text box

Adding a text box used to provide handles on all four sides. Now with the free 'upgrade' I only have handles on left and right side. Help system useless.

I was in Pages. Sorry about that fellows. And yes, you're right Jerrold, the Help for Numbers offers information that is incorrect. Even the folks at Apple are a bit confused by the Numbers text box!
Even if incorrect, I like the new Help system. It seems much faster to access than the old system.

Can InDesign handle "hidden" text boxes?

I've been tasked with creating a Userguide Lab Manual with student exercises. The client wants content to be in three layers: 1) basic tasks listed, 2) accessible "hints" to complete tasks, 3) accessible step-by-step explanation to complete tasks. Levels 2 & 3 should be initially "hidden" text boxes that the student can access if needed.
Can InDesign handle this? I realize this is something HTML can handle ... but the client wants a e-PUB document, something portable, in the end.
Can you give me advice? I've looked and looked at many elements of InDesign. Often I see "hidden" elements must be converted to an image (button?); elements of Interactivity usually means video or animation... but I want editable text. In theory, we want to be able to develop ONE master, and then reveal (show) different layers ... and i the end publish three levels of Userguide Lab Manual.
Is this possible?

@Pinenuthunter – did you consider iBooks Author app (Mac OSX 10.7 and above) for this task and publishing in ibooks file format to the iBooks app on iPads or to iBooks app in OSX 10.9 (Mavericks)?
Here a link to a Lynda.com tutorial:
Adding an interactive lab quiz
From:
iBooks Author for Teachers: Creating a Lab Manual
with Mike Rankin
http://www.lynda.com/iBooks-Author-tutorials/Adding-interactive-lab-quiz/117541/125117-4.h tml
Uwe

SAPSCRIPT - TEXT ELEMENT

Hi ,
   In print program there is a text element 525.
   I am using that text element to print the line items in sapscript.
   But this 525 text element is not trigered in sapscript.so help me out
   to solve this issue.
I am using RFFOUS_C print program to print DD data in F110 transaction.
Thanks.

Hi Pandiyan
Did you get the solution for your problem. I am facing the same situation. Text Element 525 is not getting triggered when I am using RFFOUS_C program and a customised script. If you had figured out this problem could you please tell me the solution.
Appreciate your help.
Alok

Xcode storyboard: no resize handles on text field

Hi,
I'm going through the "Start Developing iOS Apps Today" tutorial (https://developer.apple.com/library/ios/referencelibrary/GettingStarted/RoadMapi OS/index.html#//apple_ref/doc/uid/TP4001…. My first time through I didn't have this problem but now I do and can't find any info on why or how to resolve.
When I drag a text field from the object library tot he storyboard, there are no resize handles on it. I created a Jing screencast and uploaded it here: http://screencast.com/t/tmZYug3yx
I have uninstalled/reinstalled xcode and rebooted my machine. I've tried control-click, option-click and cmd-click but I can't get resize handles to appear and can't find any other way to resize the object. Nor can I find any option that might control whether or not resize handles should display.
I would greatly appreciate any suggestions.
Thanks,
Ty Hallsted

I don't know why you can't resize the text field when you select it, but you can resize the text field from the size inspector. In your screencast if you look at the right side of the window, you'll see a series of buttons at the top. Click the button that looks like a ruler to open the size inspector or choose View > Utilities > Show Size Inspector in Xcode.

Why convert HTML to sapscript text

Hello,
I have a view that contains a "FormattedTextEdit" I would like to save the text that the user entered. For this I used the function module "READ_TEXT" and methods "CREATE_FROM_SAPSCRIPT".
My problem is converting a text "HTML" to "SAPscript".
Thank you for your help.

Hi,
You cannot convert HTML to sapscript/smart form. But you can convert sap script/smart form to HTML form using CL_WD_FORMATTED_TEXT class.
There is no such provision given by SAP to convert HTML to other formats.
Regards,
Kiran

Handle Sapscript text

Similar Messages

Maybe you are looking for