Handling similar developments for different rollouts

Hi Fops,
We are in process of going for different rollouts. Were in we have identified certain developments which would be common to other Regions but with some modifications .
As there is just difference in days between different rollouts , we have to start working on those identified developments -which are in common .
Can anyone please tell me how can i differentiate the code from one region to other . Say i am using a same enhancement for all the rollouts , is there any standard way to restrict codes to that particular region/rollout .
Or can we do it using a Function Module , if so please help.
Valid replies which meets my requirment will be awarded!!
Thanks,
Aru

I am not sure if there is a standard way of doing this, but one possible option (although not a efficient one) is to maintain a Ztable with the release number and release dates. And you can differentiale between the releases in the code by doing a select on this Ztable with the current date. If the current date(sy-datum) is greater that the release date then only execute the code. Again this is not a ideal solution, but you can use it if you dont have any other choice.

Similar Messages

Handling syncrnous call for different services

Hi all,
I have a senario in which data from a proxy will be sent to JDBC.It will execute a stored procedure and thus generate a response which wil have a return status code of error or some thing else.
It is an error it should send a mail .. if not there should be no mail generated.
I dnt want to use BPM ..
Can this be done with some UDF in the Mapping?
Rgds
Aditya

HI Aditya
no need of BPM,both proxy and JDBC support sync communications
just do a Proxy-XI-JDBC scenario
for client proxy refer:
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
ths next step is jdbc recv where u configure it in a sync way to get the response. refer:
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
U can refer this link it is very use ful for Sync
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
look at the reply of prateek in this thread
proxy to jdbc
also look this thread discuss the same
Re: RFC to JDBC response
Thanks !!

How to get similar color for objects in different pictures

how do you get similar color for objects in different pictures
I have a prodject that i'm working on and i need to edit several images at once (preferabley) so that they are the same color. They are wooden cupboards and i need all the wood looking the same colour. In light room you can edit a group of images at the same time hence the colours are the same . Is this possible in Elements ? If so how do i do this ?
I have tried duplicating layers and it just replaces the whole image, it seems to work using levels layers but not the other layers ... I have 30 more images to do and would ideally not like to adjust all the images manually ? I dont mind doing minor tweaks. Essentially all the images where taken with the same camera and lighting and lens's ...
Screen shot is where I'm at at the moment...
I have posted this question else where but was told to repost - this is a link to my previous post as to where we got to
http://forums.adobe.com/message/4720576#4720576

You could try using the raw converter. Open one file and edit it (File>Open, pick the image and choose Camera Raw as the format before you click Open). Then open the next image and click the little four-lined square on the upper right side of the ACR window and choose Previous Conversion from the flyout menu.

Handling address related information for different countries

Hi,
We are trying to understand the best way to display / query address related information (while designing internationalization for our application) - from users based on their locale - for example we would need to ask zip code - if the user is in US, in UK it would be postal code , there would be counties in UK but not in India etc . Is there some guideline / frame work for designing address related forms for international applications?
Thanks in Advance for your help !!

The problem is that you need different pieces of information for different countries, and they need to be in a different order. Some information is required for some countries, some information does not exist for some countries, and the content for certain pieces of information is different for some countries.
If you are not going to do any kind of verification of the information (zip code, for instance), and also not check whether the field is filled in at all, then it doesn't matter if you have separate fields.
There are 3 choices:
1. Implement correct addresses for every single country in the world
2. Implement correct addresses for a few select countries, and then state clearly that you only support those countries
3. Treat an address as a single piece of information
Good luck with #1.

Can we handle content convertion for TabDelimiter flat file in JMS

Hi,
Is it possible to handle content conversion for TabDelimiter flat file in JMS (Not in FILE adapter).
If possible .. can you please explain.
Regards,
Siva.

Hi, Siva:
Yes, this is possible.
The way that JMS adapter to handle content cnversion is similar to the way file adapter does.
Different from file adapter, you do not have to specify "Content Conversion" as transport protocol, you need to use transformation bean (localejbs/AF_Modules/MessageTransformBean) in Module tab.
Check page 23 of the following link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a05b2347-01e7-2910-ceac-c45577e574e0
Liang

Handle not valid for open spool request

Hello everyone,
i am facing an error while clicking the print preview option in change PO (me22n).
i have given the dispatch time in further data of o/p as 'Send with application own transaction'.
now, when i save and click print preview button i get an error as
"Handle not valid for open spool request"
Kindly give me some idea how to tackle this.
Thanks
gaurav

Gaurav,
I am having a similar issue and would appreciate if you could let us know how your problem was solved?
What control parameters did you change to make this work?
Thanks,
Jay

Cost Distribution in Shopping Cart for different account assignment type

Hi friends,
We are at SRM Server 5.5 at level SAPKIBKT07. Business scenario is extended classic.
User is creating a shopping cart with single line item and distributing the cost to multiple account assignments (say Cost Center and Order). Shopping cart has a valid source of supply. System creates a PO in SRM and tryu2019s to replicate the PO in ECC backend, however fails to replicate.
My understanding is that in ECC backend it is not possible to combine two different account assignments while distributing cost at item details.
Solution would be to create separate line items for different account assignments (distribute between similar account assignments).
Is my understanding right?
Thanking you in advance,
Sandeep

Sreedhar,
Thanks for your update.
I am also MM consultant, so as far as MM goes we can only maintain one account assignment type per line item. In MM we have provision of multiple account assignment but it works only for single account assignment type per line item. Which means if account assignment is "k" then we can split between multiple cost centers, but we cannot split between cost center and WBS element in one line item.
You said it is possible to split between multiple account assignments in one line item. Will it be possible for you to try at your end and let me know how PO/PR are created in backend?
Sandeep

How can we change the color of the image for product display for different

Hi All,
How can we change the color of the image for product display for different colors, to be displayed on site.
jeff

Hi priya,
The requirement that you have stated is not a standard feature in ISA CRM. In order to do the same, you will need to modify the standard ISA code in Java. A common path for the solution would be as follows:
1. Colours
    a. Maintain a text type for Color under the object - PCAT_ITM in Customizing.
    b. Modify the standard search of ISA to search within your new text type as well. (In standard it only searches in Description.
   c. Maintain all shirts colour data in the new type created in step a.
   d. Your requirement will be done!
2. Price
a. Use list prices for your shop and assign the appropriate condition type, acces in your catalog.
b. Modify the standard search of ISA to search on the list prices as well.
c. This too will be done!
3. Accessories - This is very tricky, and will require some exploration. However, here's my opinion,
a. Search for the standard function module, which will return the accessories when provided the product as an input.
b. Modify this function module according to your requirement and ensure that it can be accessed remotely.
c. Modify the JSP as in steps 1b and 2b above to call this new remote-enabled function module.
d. Now you're done!!
The ISA modification part is not so simple, you need a really good guy like "Sateesh Chandra" who'll be able to handle your requirements. This is all I could manage, hope it is some help to you!
Thanks & Regards,
Nelson.

Valuation Basis for Different Payment (BWGRL) not working in 2010

Hi
We have a commission wagetype which we entered in IT 2010 in Number/Unit field.
Since we don't have premium id available, we used "Valuation Basis for Different Payment (BWGRL)" to enter the RATE.
This RATE is not working during our payroll run, however when we are using the wagetype with premium ID it is working fine.
My question is- What could be the reason that the Valuation Basis for different payment is not working ?
I checked the wagetype in V_512W_B table and it has the following configuration-
Current wage type
Valuation Basis = BLANK
Statement/WT = BLANK
%Rate = 100
1st derived wage type
Valuation Basis = BLANK
Statement/WT = BLANK
%Rate = BLANK
2nd derived wage type
Valuation Basis = BLANK
Statement/WT = BLANK
%Rate = BLANK
Would appreciate if the the fix could be provided.
Saurabh Garg

Hello,
I think in your case for commision wagetype you need to modify rule $930 to process the override rate from Infotype 2010 BWGRL field in case you are using the US standard schema.
The valuation basis table V_512W_D and rule $930 together will determine the valuation basis.
The default valuation basis comes from table V_512W_D.In case you want to override the valuation basis rate defined in this table,you need to maintain override rate in It2010 and accordingly have the logic defined in rule $930 for that particular wagetype .
Following is the sample rule definition for a similar scenario.
****(commision wagetype)
NUM= ANZHL Set
RTE= BWGRL Set
RTE?0      Comparison
      MULTI NRA Multipl.amt/no/rate
      SETIN X=NX Set variable split
      ADDWT *    OT   Output table
    =
      VALBS0     Eval.0.WT in 512W
      MULTI NRA Multipl.amt/no/rate
      SETIN X=NX Set variable split
      ADDWT *    OT   Output table
Regards,
Malathi V.

New Document Series for different locations for Production Orders

Hi Experts,
I have came across a scenario where we have to setup different Document Series for Different Locations. Actually the Company is having 2 units . First one is the factory itself and the second one is Subcontracting Unit to which the company sends the job work order . But there it wishes to track the productions processes and the Stock tracking Warehouse Wise for
this Second unit also . As Such I have created 2 locations and one warehouse for (RM,SFG,FG) for both the units.
The obvious requirement here is to maintain different Document Series for Productions orders for both the units .
Please guide me about how to overcome this scenario.
Thanks and Regards,
Pooja Singh.

Hi Pooja,
Yes. You can maintain different document series for production Order or any documents depending upon your business scenario. Let's say, you need to maintain Production orderu2019s of job work and sub contracting.
You can define this under Administration>System Initialization> Document numbering.
Select Production orders--> let say Factory first number 1, last number 199999, select current period indicator and update. Similarly for the subcontracting, in the name field, "work order", first number as 110001 or the way you desire, and then the last number.
Reards,
Senthil Maruthappan.

How to Configure Adapter for different environments?

Hi
I wanted to know solution to a pratical problem. If a communication channel is created by configuring a adapter, how is the configuration managed for different phases of the life cycle i,e when it goes from development to QA to Production. A adapter may need to be configured differently depending upon the environment it is in. I hope one doesn't have to change it every time it is taken from one environment to another. Is there any concept like properties file in XI?
Vijay

HI,
In general the Same evironment should be in both Dev and QA and also in Prod .
Whatever we developed in Dev environment , if you transport it to QA , the same should work, similarly in Prod also.
We have certain fecilities like cutomising the Communication channel with the Communication Channel Template.With this we can configure as per our needs.
Eventhough it is not sufficient to meet your BS requirement , then we need to have
Dynamic configuration see the below link for more details
Dynamic configuration in adapter modules - /people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules
Dynamic Configuration of Some Communication Channel Parameters using Message Mapping -
/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping
Regards
Chilla

Execute BAPI for different input values and dispaly data in a table

Hi all,
I have a specific problem about executing BAPI multiple times for different input values and didplay result in a table.
I am using the code similar to the following logic.
Bapi_Mydata_Input in = new Bapi_Mydata_Input();
wdContext.nodeBapi_Mydata_Input().bind(in);
String in = wdContext.currentperdataElement.getnumber();
in.setDestination_From(10)
wdThis.wdGetMydataComponentController().executeBapi_Mydata_Input();
in.setDestination_From(20)
wdThis.wdGetMydataComponentController().executeBapi_Mydata_Input();
in.setDestination_From(30)
wdThis.wdGetMydataComponentController().executeBapi_Mydata_Input();
And I want to display the data in a single table. I want the result in a table for Bapi execution based on input parameters passed 10,20 30.
But I am getting the table data only for the input parameter 30.I mean its actually display the data in table only for the last input parameter.
So May I ask you all if you know the solution for this problem.PLease advise me with some tips .or sample code is very much appreciated.I promise to award points to the right answer/nice advises.
Regards
Maruti
Thank you in advance.

Maruti,
It seems that WDCopyService replaces content of node, rather then adds to content.
Try this:
Bapi_Persdata_Getdetailedlist_Input frelan_in = new Bapi_Persdata_Getdetailedlist_Input();
wdContext.nodeBapi_Persdata_Getdetailedlist_Input().bind(frelan_in);
final Collection personalData = new ArrayList();
String fr1 = wdContext.currentE_Lfa1Element().getZzpernr1();
frelan_in.setEmployeenumber(fr1);
wdThis.wdGetFreLanReEngCompController().executeBapi_Persdata_Getdetailedlist_Input();
WDCopyService.copyElements(wdContext.nodePersonaldata(), wdContext.nodeNewPersonaldata());
for (int i = 0, c = wdContext.nodePersonaldata().size(); i < c; i++)
personalData.add( wdContext.nodePersonaldata().getElementAt(i).model() );
String fr2=wdContext.currentE_Lfa1Element().getZzpernr2();
frelan_in.setEmployeenumber(fr2);
wdThis.wdGetFreLanReEngCompController().executeBapi_Persdata_Getdetailedlist_Input();
WDCopyService.copyElements(wdContext.nodePersonaldata(), wdContext.nodeNewPersonaldata());
for (int i = 0, c = wdContext.nodePersonaldata().size(); i < c; i++)
personalData.add( wdContext.nodePersonaldata().getElementAt(i).model() );
wdContext.nodeNewPersonalData().bind( personalData );
Valery Silaev
EPAM Systems
http://www.NetWeaverTeam.com

HR CEE add-ons for different countries in one system

Hello,
is it possible to have HR CEE add-ons for different countries in one system?
Will SAP system work properly? What kind of risks of these imports?
Thank you very much.

A couple of generic answers on add-ons
- of course you can have several add-ons working on the same B1. To understand
the details on how add-ons are started and maintained by B1 desktop pls refer
to the e-learning available here on SDN
- compatibility of add-ons. There is no generic answer to this, it depends on the
functionality and implementation of the two add-ons. Anyway, if two add-ons are
functionally independent and they follow the solution guidelines, then they should
be interoperable. You can find the solution certification guidelines here on SDN
under the ICC section: these rules cover points like namespaces, event handling,
user table and form creation and so on that enforce interoperability.

Check In Similar Fucntion for PCM within URM

Hi All,
Using the checkin similar options for Physical content items within URM, doesnt pull any of teh location infromation across to the new record. Other fields are pulled across successfully.
Not sure what could be casuing those fields not to populate. Any idea's?
Thanks

Hello,
If we give two manual triggers with 2 different Xpath conditions for applicable image, then documaker executes an OR condition between the conditions to trigger the image.
Thanks.

Different aggregation for different Dimensions

Hello,
is it possible to have different aggregations on different dimensions.
I have following situation:
I have a measure per client and day.
I'm interested in the maximum per month from the daily sums over clients.
In the measure properties I can only choose between Maximum and Sum in general but not per Dimensions.
To clearify what i mean here is some sample data.
* * Client A * Client B *
* 2014-11-28 * 7 * 8 * SUM() = 15
* 2014-11-29 * 6 * 8 * SUM() = 14
* 2014-11-30 * 6 * 10 * SUM() = 16 <-- monthly max
* 2014-12-01 * 7 * 8 * SUM() = 15
* 2014-12-02 * 5 * 12 * SUM() = 17 <-- monthly max
* 2014-12-03 * 6 * 9 * SUM() = 15
This data is stored in my fact table with reference to date and client dimensions.
This example data would have to be reported as:
/* Report on measure
* * Measure *
* 2014-11 * 16 *
* 2014-12 * 16 *
* Report on measure per client
(max per client and month)
* * Client A * Client B *
* 2014-11 * 7 * 8 *
* 2014-12 * 7 * 12 *
Can this be achieved with SSAS? Didn't find any property for that on the measure.
Best Regards,
Thomas

Hi Thomas,
According to your description, you want to calculate different aggregation for different dimensions, right?
Based on your scenario, I tested it on AdventureWorks cube, the query below is for you reference.
with member [Customer].[Country].[USA & Canada] as
Aggregate( { [Customer].[Country].&[United States],
[Customer].[Country].&[Canada]
member [Measures].[MaxAmount]
as
max([Date].[Calendar].currentmember.children,[Measures].[Internet Sales Amount])
select {[Customer].[Country].&[United States],[Customer].[Country].&[Canada],[Customer].[Country].[USA & Canada]} on 0,
[Date].[Calendar].[Month].members on 1
from
[Adventure Works]
where [Measures].[MaxAmount]
Here is similar thread with yours, please see:
https://social.technet.microsoft.com/Forums/en-US/1bd493ef-f957-4fd5-916b-ee60639106c3/calculated-member-different-aggregations-on-different-dimensions?forum=sqlanalysisservices
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Handling similar developments for different rollouts

Similar Messages

Maybe you are looking for