Handling unit sales unit not allowing to do PGI.
Hi.
My Basic unit of measure is KG. and my sales unit of measure is TS( 10,000).
When i am doing the picking and asigning the handling units and if I asigns the handling units ( delivery units Kg) it works fine and if i do it for the delivery in TS .it some times picksup the handling unit and not allowed to do PGI.
the conversion factor is ok. and and delivery allows only 3 decimal points.
conversion factor is as follows.
10 TS = 89 kg.
Hi
Don't use the handling unit while doing PGI, still if you want to use handling unit, then you define procedure for handling unit at IMG.
Path:
IMG, Logistics General, Handling unit management, basics, Technical basics, and set the procedure.
Reward if it helps
Regards
Prasanna R
Similar Messages
-
Operating unit access is not allowed.check that you have access to OU
Hello,
I am working on supplier conversion. 11i to R12 (Linux). Old DB is 9i and new is 11g. I am getting the below error when i am trying to upload supplier site
msg count2
Status E
Vendor site id
Party site id
Location id
return_status: E
l_msg_data:Operating unit access is not allowed. Please check that you have access to the operating unit: XXLABS Operating Unit, 100
l_msg_data:Operating Unit Info is null
we created a new org 100 and i am trying to create supplier sites in that ORG. We created a site to the supplier from front end but when i try from the back end i get this error. Below is the code
DECLARE
l_vendor_site_rec ap_vendor_pub_pkg.r_vendor_site_rec_type;
l_return_status VARCHAR2(10);
l_msg_count NUMBER;
l_msg_data VARCHAR2(1000);
l_vendor_site_id NUMBER;
l_party_site_id NUMBER;
l_location_id NUMBER;
l_msg_index_out NUMBER;
BEGIN
mo_global.set_policy_context('S',100);
SELECT vendor_id
INTO l_vendor_site_rec.vendor_id
FROM pos_po_vendors_v
WHERE vendor_ID = 3101;
l_vendor_site_rec.vendor_site_code := 'WOBURN_test';
l_vendor_site_rec.address_line1 := 'XX WEST PARK';
l_vendor_site_rec.city := 'WOBURN';
l_vendor_site_rec.state := 'MA';
l_vendor_site_rec.country := 'US';
l_vendor_site_rec.zip := '01801';
l_vendor_site_rec.org_id := 100;
pos_vendor_pub_pkg.create_vendor_site(
p_vendor_site_rec => l_vendor_site_rec,
x_return_status => l_return_status,
x_msg_count => l_msg_count,
x_msg_data => l_msg_data,
x_vendor_site_id => l_vendor_site_id,
x_party_site_id => l_party_site_id,
x_location_id => l_location_id);
COMMIT;
DBMS_OUTPUT.PUT_LINE ('msg count'||l_msg_count);
DBMS_OUTPUT.PUT_LINE ('Status '||l_return_status);
DBMS_OUTPUT.PUT_LINE ('Vendor site id '||l_vendor_site_id);
DBMS_OUTPUT.PUT_LINE ('Party site id '||l_party_site_id);
DBMS_OUTPUT.PUT_LINE ('Location id '||l_location_id);
dbms_output.put_line('return_status: '||l_return_status);
IF (l_return_status <> 'S') THEN
IF (l_msg_count > 0) THEN
FOR i IN 1..l_msg_count
LOOP
fnd_msg_pub.get
(p_msg_index => i,
p_data => l_msg_data,
p_encoded => 'F',
p_msg_index_out => l_msg_index_out
fnd_message.set_encoded(l_msg_data);
dbms_output.put_line('l_msg_data:'|| l_msg_data);
END LOOP;
end if;
END IF;
END;
Any ideas????I found a similar problem and the instructions said to check a permission box in the "Get Info" tab.
This applies only when the Library is on an external drive. You cannot ignore permissions on the system drive.
I was deleting files trying to make space on my hard drive
What were you deleting?
and noticed as I was deleting files more data was being added to the iPhoto Library.
Hard to see how deleting files can add data to the iPhoto Library. Can you explain why you thought this?
I would really like to keep these pictures.
Make a back up now.
Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store -
Serial Number System Status is EDEL and ESTO, SAP does not allow to do PGI
Hello All,
We are unable to make PGI for Sales Order 2066904/10 because of wrong Serial Number Status.
Delivery note was created on the 22.12.2012 and then due to errors deleted on 27.12.2012.
Problem is that now we need to do PGI but Serial Number System Status is EDEL and ESTO, SAP does not allow to do PGI with Serial Number Status ESTO.
These 8 products are in Stock and available for this Sales Order, one of the Serial Numbers is with OK Status
8115001012
8115001057
8115001058
8115001079
8115001081 with OK status
8115001180
8115001181
8115001690
Please let us know how to correct the problem so we could do PGI for this Order?
This scenario is not replicable in RST(Quality System)
Our Findings:
** 1. We have tried IQ02>Edit>Special Serial No Functions>Manual Transactions>To Stock, But it still do not remove EDEL.
2. Is it suggestible to use T Code BS22 and thereby change PMS8 to Warning? I am not sure regarding this since this a SAP managed Table
Your help is highly obliged......This is very urgent..........
Regards,
Anirban
SD ConsultantHi,
I have encountered same issue today and here is the solution:
1. Manually changed the status from EDEL/ESTO to ECUS
Go to Edit > Special Serial Number Functions > Manual Transaction and select "To Customer", then save.
2. Once status is in ECUS, change the serial number status back to ESTO.
Go to Edit > Special Serial Number Functions > Manual Transaction and select "To Stock", then save.
After doing the 2 steps above, you should be able to do PGI using the serial number.
Kindly advise if it works for you.
Regards,
Vhanie -
Material condition unit of measure not allowed
Hello Friends,
I am facing error of material XXXX condition ZPPL unit of measure SFT not allowed while creating the opportunity in CRM
Kindly note that I have defined a new UoM in ERP and for this new UoM the sales created perfectly in ERP, i have checked the netweaver settings for ISO codes and UoMs in CRM and they are fine...
Please help me with thisDid you ever find the solution for this? I am getting the same warning message and have no idea why it is defaulting 'ST'.
-
Ipod Touch software 4 sale will not allow me to click 'No Thanks'
I have an Ipod Touch software version 1.1.3 and Itunes 7.6.0.29. Every time I connect my Ipod Itunes is supposed to automatically connect and begin synchronizing with my computer. However I am being sold some new upgrade of software for my Ipod because I didn't pay enough money for it, evidently to get free software upgrades. When I click the button that says "No Thanks" I get an error message from the Itunes Store that says it can't process my request. I get it each and every time I connect my Ipod. It sure seems like I am being force fed that software. What part of NO doesn't the Itunes store understand? Really guys it sure feels like I am being harassed to buy this thing and i don't want it. What is the fix? I have already reinstalled the Ipod software and that didn't work.
Torrent of Life wrote:
That is a pretty glib answer. Not one title on the Itunes support web pages addresses the issue of the Ipod Touch software having an inability to connect with the Itunes Store. Can you please be specific? Where specifically am I to find the answer to this question?
Didn't mean to be glib, rude, etc...Just tried to throw you a help section that MIGHT hold your answer. Doesn't look like anyone else is helping. Sorry I couldn't give you the exact answer.
I'm even going to suggest another one: http://www.apple.com/support/iphone/
Have you tried posting your questions in the iPhone discussion forums?
I see you're newly registered so just as an FYI in case you didn't know the only "guys" in here are users like yourself. You are not directly addressing anyone from Apple. Just others like yourself who have a problem or try to help those who have problems. -
Not allow to change payment terms
When creating a sales order, not allow to change the payment terms. can I block it? Thanks!
There 2 ways to process this,
Use SHD0- enter Transaction code.
create variant by blocking the "Payment terms" field in display mode.
assign this variant(Z) in VOV- doc type- Variant field.
which this variant is applicable to this doc type, payment terms will be in display mode for all the transactions for this doc type.
How you want to block this field? based on customer/material or doc type wise? -
The sales unit is not allowed+STO plant to plant
Dear Friends,
In plant to plant stock transfer,while creating delivery in VL04,system is giving the following message-
'The sales unit is not allowed for the material in item 000010'
I have not assigned any sales unit to the material still it is giving this error.
Please adviceHave a look at the following note:-
Note 140551 - VL384 Stock transport order and batch selection
G. Lakshmipathi -
LSMW Sales unit ****** 1 is not defined for item 000000 2
Hi, all,
I am trying to create order using LSMW with
Object 0090 Sales documents
Method 0000
Program Name RVINVB10
Program Type D Direct Input
The issue is at the Sales Unit.
I prepared the unit as PC in the folloiwng 3 fields
ZIEME Target quantity UoM
VRKME Sales unit
MEINS Base Unit of Measure
But get the following error, any thoughts?
Start of processing
V1 384
Sales unit ****** 1 is not defined for item 000000 2
Data from this document has not been saved ***Alright Koffer,
I'll give U the place, from where this error can occur, check which is applicable to you:
1) In FV45PF0M_MARM_SELECT, after calling the FM MATERIAL_READ.
2) In Include, FV45PF0V_VBAP-UMVKZ_ERMITTELN, after calling the FM : MATERIAL_UNIT_CONVERSION.
3) In Include FV45PF0V_VBAP-VRKME_PRUEFEN, after material unit conversion.
4) In Incl. FV45PFAP_VBAP_FUELLEN_MAAPV, after call to the FM : F4_ALLOWED_QUANTITY_UNIT.
If U understand German( Ich Keine Deutsch lernen ), U might go to these programs and check the description.
However, all these point to the Sales Unit as U already know.. check all the data related to the Sales Unit and whether this unit is allowed for the material being used.
Rgds,
Raghu. -
Sale unit of measure is not copied into Delivery from MF60 staging
Hello all,
we are using MF60 for EWM staging. Component has base unit of measure as M2. For production purposes, issue unit of measure was set to KG.
I managed to get KG in MF60 during staging, but Outbound delivery created contains however unit M2. This is unit of issue from sales org1 tab. I changed this to KG, but still M2 is coming.
Please let me know if you know what is the problem.
Thanks in advnace!
Regards, Andrey.Hi Andrew,
I think this issue is nothing to do with EWM. You can check with your SD consultant why sales UoM not getting copied into delivery. May be because of some delivery type or delivery item type settings.
I had same issue for over delivery tolerance, which I raised with SAP and they advised to use the customized BAdi to get it done.
Thanks,
sandip -
Unit Cost is not Populating in Sales Order Line Level for OPM Enabled Org
Dear All,
This is to inform you that Unit Cost is not populating in Sales Order Lines. Ideally it should pick from OPM financials, but whenever i am running Cost Update it is throwing error. We need to pull out Unit Cost for Sales Analysis Report. Please suggest on the same ASAP. What are the steps needs be followed to populate the Unit Cost. Please suggest.
Thanks & Regards,
PatrickHi
I think it will pick from PRICE list. Why don't to you try by keeping this item in the mentioned Price list.
Regards
Raj -
Value & is not permitted for attribute Sales Unit - Material Object
Hi gurus,I would very much appreciate expert advice on how to solve the problem I´m facing when lauching middleware object MATERIAL.
I have 2 BDocs in red showing the following error:
Value B20 is not permitted for attribute Purchase Order Unit
Value B20 is not permitted for attribute Sales Unit
I have checked table T006 and customizing and I do have unit of measurement B20 created on CRM so I don´t understand where is the error.
Could you please help me?
Thanks in advanced,
Regards,
Lorena.Dear Lorena,
Many Thanks.
ok, I need to do manually in the CRM system. I have one question
1: If any changes in the ERP system the data is automatically replicated in to CRM system right? then Why we need to Configure again in the CRM system. for Examaple: Proudct group and Tax.
2. No, I did not replicate Sales Org., but this is also automatically replicated into CRM system. But it is already replicated into CRM i.e. Initial download.
my question is in r/3: If one customer have 2 Sales Area data is maitained in the R/3, that information is also available in the CRM side. if one more sales area is assigned to same customer, that information is also availbale in the CRM system right? but I could not able to find the new sales area data. what is the reason? and how I can dowload the changes in the CRM system?
I realy thanks to you, providing most valuable information and supporting to me.
kindly provide me where should I promote points to you.
I will try and let you know, if I am getting any problem, I will ask you again.
Thanks and Regards,
Jags -
Hello,
Did anyone ever have the same error message 'Payments are not allowed for business unit (6000,568)' so that he can tell me what I did wrong?
I get this message when I click on 'add' on the regular or epress deposit pages
I have set up the payment options at BU Level so I have no idea what to do know.
Regards,
StijnI forgot to creae the group type P ....
-
Dear all,
I can't create SO with sales unit(SU) F2, because in list sales unit (SU) not found. but in table T006 the F2 is there. we have error message "Sales unit F2 is not defined for item 000010"
Would you like help me please
thanks and regrads
imronDear Avi Kamu,
i have finish to add F2 in path "img-sap netweaver- general settings- check units of measure" before i create SO,
any other solution ?
thanks
imron -
Error in CNS0 :Sales unit is not valid for the item
Dear Team ,
we are using assembly process ,after creation of project from sales order ,requirments are pass to production planning (PP), Asign the bom to activites then we are going to delivery through project (cns0) at the time system shows error" sales unit is not valid for the item" we check the options in material master .please help me on this issue.
Thanks &Regards
R.B.RAOHave a look at the following note:-
Note 140551 - VL384 Stock transport order and batch selection
G. Lakshmipathi -
I'm trying to buy CC Photoshop/Lightroom packages. In order to complete payment, I need to change the country from the default options (United States) to Brazil, But I'm not allowed to do it. I've already changed my origin country in my account information.How do I change the country in order to complete payment?
These are the two links I have
Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html
If the above doesn't help, you will have to contact Adobe (this is an open forum, not Adobe support)
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
Maybe you are looking for
-
Looking for a Photo App recommendation.
I am looking for a site forum or where I can ask to see if this type of Photo Editing App exists? I need one that can paste one photo on top of another, or similar? More or less, a pic in a pic type. I have tried some collage apps yet they only place
-
I just bought an iphone 5. I came home to backup my iphone 4 to my pc (Windows 7). I transferred purchases, then selected "automatically Backup", then clicked on "This Computer", saying a full backup would be stored on this computer. that was almo
-
Windows 8 Mail from Microsoft setup problem
I have a Dell tablet running Windows 8.1 Professional. I've installed the Universal ("Metro") app "Mail from Microsoft". I've set up an IMAP account. I'm able to log in, receive and send email. But, the email address for this account is different th
-
Bridge menu item tools photoshop batch is not present in CS4
I recently installed CS4 on an iMac running OS 10.5.7. I have a 3.06 GHz Intel Core 2 Duo processor, with 4 GB of ram. The hard drive is 1 Terrabyte. In CS3 I could invoke my photoshop actions from bridge. No such luck here. I'm finding reference
-
Need Help on Language specific URL's
Hi, Im creating URL iview.In that iview i need to provide different HTML links for each language.I've referred the document(http://help.sap.com/saphelp_nw04/helpdata/en/44/aabd5c7e8e0a47e10000000a1553f7/frameset.htm).As per the step 2 mentioned in th