Unit Cost is not Populating in Sales Order Line Level for OPM Enabled Org

Dear All,
This is to inform you that Unit Cost is not populating in Sales Order Lines. Ideally it should pick from OPM financials, but whenever i am running Cost Update it is throwing error. We need to pull out Unit Cost for Sales Analysis Report. Please suggest on the same ASAP. What are the steps needs be followed to populate the Unit Cost. Please suggest.
Thanks & Regards,
Patrick

Hi
I think it will pick from PRICE list. Why don't to you try by keeping this item in the mentioned Price list.
Regards
Raj

Similar Messages

  • Sales Order - Line Level Information in Info cube

    Hi BW Guru's,
    We are using the following scenario: -
    Info cube = Sales Order – Line level information (yes, we want to capture the product level sales order information in info cube for our internal reporting purpose)
    ODS = NO. we are not using the same
    Info Source – Same as data source (standard one)
    Data Source – 2LIS_11_VAITM (standard business content data source for sales order information)
    Delta in above data source = contract related information (5 extra fields) – working fine – added as append structure in the data source
    Extractor = Standard using SBIW - Perform setup - SD Sales Order (SD – 11)
    Number of Sales order line records / month = 80,000
    Historical Sales order data to be uploaded = 1 year = 80,000 * 12 = Nearly 1 Million records
    Hardware Configuration = 4 * 750 MHZ, 8 GB RAM
    Please advice on the following things: -
    1) How long it will take to upload 1 million records in BW?
    2) Does our server capacity sufficient enough to take 1 million load?
    3) Which delta procedure should we follow for day to day Sales Order line level data updation? Please advice on data selection procedure.
    4) In case, last month Sales Order is changed, how to reflect the same in our info cube? Please suggest the suitable method.
    Waiting for your reply.
    Thanks
    Rajiv

    Hi Rajiv,
    1) How long it will take to upload 1 million records in BW?
    This depends on your network, on the width of your data record, the performance of your machine, on the settings for communication between BW and R/3 ....
    It can be done in 2 hours, in 3 hours, it can take a whole day. There is no exact answer possible.
    2) Does our server capacity sufficient enough to take 1 million load?
    If your disc space is enough, no problem. If you already loaded your master data, there is not too much space necessary to load the transactional data.
    3) Which delta procedure should we follow for day to day Sales Order line level data updation? Please advice on data selection procedure.
    Just run your initial setup and initialize your delta. Run a daily delta package (this is what most companies do).
    4) In case, last month Sales Order is changed, how to reflect the same in our info cube? Please suggest the suitable method.
    The extractor takes care about this, just post the delta to your cube, that's it.
    Hope this helps,
    regards
    Siggi

  • Subinventories not listed in Sales  Order Line

    Hi Gurus,
    Need your help for the below issue.
    I enabled Subinventory field (through Folder>Show Filed) in the Sales Order line. But, when I click the LOV there were no subinvnentories listed. The inventory org is listed correctly. I tried with different OUs and also inventory orgs, but no use. I had created Storage subinventories only. The subinventory has stock on the item I entered in the sales order line.
    Any feedback on this would be highly appreciated.
    Thanks in advance.
    Prasad Dhanakodi

    Hi,
    Doc ID: Note:737575.1 (Metalink)
    Sub-Inventory Entered On Logistics Line Does Not Populate in Sales Orders
    Hope this doc might give you some help.
    Thanks,
    Gaurav

  • How to make Delivery block at Sales Order Header level for specific materia

    Hi,
    My client want to create a delivery block EDI order at the Order Header level for specific materials
    How can we achieve this.

    Dear Varada rajan
    Go to material master, select "Sales: sales org.1" view and assign "01" against the field "DChain-spec. status" and save.  By assigning, for a particular sales area, you can block that material.
    Now go to OVSU select 01 and assign "B" against the field "Block delivery".
    Now create a sale order and post the outcome.
    thanks
    G. Lakshmipathi

  • Credit Information not populated on Sales order

    Hi - I'm trying to post some sales orders to check the credit checking settings. However, I noticed that when I create a sales order, the Credit control area, Credit account all blank in VBAK table. Due to this, the settings in OVA8 are not working.
    I checked the following so far.
    1. Company code is assigned to the Credit control area
    2. Sales area has been assigned to a credit control area (same CCr Area as in # 1)
    3. Customer account has been linked to the credit control area (again same as # 1)
    4. We are not using exit EXIT_SAPV45K_001
    5. In transaction OVAK, the sale document type has been assigned to 'Automatic Credit checking: D' and Credit group 01.
    6. I have a simple credit check: Block all document with Max Doc Val 0.01 in OVA8
    7. Credit active is Checked for Item category (using TAN in this case)
    8. In transaction OB45, update group in the relevant credit control area is set to the default setting of "12".
    9. In transaction OMO1, For info structure S066, Synchronous update has been set.
    Can someone please let me know if I've missed something and point me in the right direction?
    Kind regards,
    VH

    Thanks All -
    I've checked Subtotal A, and it exists!
    Still, the credit data is not shown on the Sales order (VBAK) I'm thinking at the minimum, the Credit control area and the Credit account should be populated. But why is it that these fields are blank on the sales order
    Any pointers?

  • Requirement Type not populated in Sale Order

    Hi,
    In our sales order a requirment type 041 is not getting populated into the sales order for one particular item category.
    Regards,
    Jagan

    Requirement type determination in standard SAP is performed using a six-level hierarchical
    sequence:
    1. First, SAP tries to determine the requirement type using the strategy group from
    the material master record.
    2. If the strategy group is not maintained, SAP determines the requirement type
    using the MRP group from the material master record.
    3. If this is not maintained either, the SAP system determines the requirement type
    using the material type from the material master record.
    4. If this also fails, the SAP system determines the requirement type using a combination
    of the item category and MRP type.
    5. If this rule is not maintained, the SAP system at last tries to determine the
    requirement type using the item category itself.
    6. If no requirement type is found at this level, the system treats the transaction
    as not relevant for the transfer of requirements or availability check.
    Regards
    Deb

  • Item text not populating in sales order

    Hi All,
                 I have a scenario where in we get the sales order created through a inbound 850 idoc .
    The trading partner sends the sales order information which gets through GENTRAN and gets posted as inbound idoc in SAP .
    The problem here is that ,there are segments with values for item text in the idoc ,but  the item text is not getting carried over to  the sales order which is getting created because of this idoc.
    There is no problem with the header text and it is present both at the idoc as well as the sales order level.
    I have checked  the configuration for text determination and everything looks fine .
    Please let me know has anyone come across a scenario like this .This is important as our EDI is getting failed when an outbound 810 is sent from SAP for the simple reason that there is no item text .
    Thanks
    Sridhar

    Hi,
    You can try the following;
    1) Try to run the program RVTEXTE in SE38 or SA38. Enter text object as VBBP, and X* as text name.
    Then in the function enter the value A and test run.
    If you find any values only with X values like XXXXXXXX, then go back and re-execute the program to delete the entry with the  selection criteria X in the function. This program is used to delete any unwanted text that is sticking in the text tables. If this does not solve, then
    2) You can post this in the ABAP forum to get some fast response from the people who can come across the situation. If found no response,
    3) Check the OSS notes, if no information available, then
    4) Put a service note to SAP.
    Regards
    Edited by: Shiva Ram on Sep 11, 2008 10:38 AM

  • Internal Item Number " Items not appearing in Sales order Line form

    Hi,
    We are in 11.5.7 vis. While choosing an item in the Sales order form, only the line items with type 'chargemaster' and 'vendor' appear. The items with type 'Internal item number' doesn't appear anymore. The item validation organization is set to the Master Inventory organization.(V1).
    When i checked the pricelist creation screen, with product attribute - item number, the product value field is empty and greyed out for all the items.
    I compiled the system Items flexfield. I tried adding a new product to the pricelist with product attribute-item number,product value - A000 .All the items (with their internal item numbers) appear while choosing the product, but the product description doesn't default and the field remains empty and greyed out.
    After saving the item in the price list and if i query for this particular item, the product description appears but the product value now becomes empty and greyed out.
    Any explanation as to to why this is behaving so and to rectify the same?
    Regards,
    Nithya

    Hi,
    Check item category determination (VOV4) whether the item category is determine with the combination of  material item
    category group,untill the material being read by the system it will not give the line item no,and also check at VOV8 for your doc
    type Item no.increment Ex: 10, is maintained or not ,if not maintain and try.
    Regards
    Ram

  • Reg WBS Element in Sales Order Line Item For Sales Order BOM

    Hi ,
    Greetings!!!!
    I have a requirement, in a Sales Order I am Exploding BOM. After that Projects will be Created.
    Once Project will be created i need to Assign WBS element for All Items in Sales Order.
    My requirement is When I assign WBS element for Header Material (Parent Item) system will auto assign WBS for Child Items.
    for this what Configuration I have to do.
    Please do need full.
    Thanks,
    Regards,
    Prasad.

    Hi Dayananda
    Check in transaction VTFL for given item category what copying routine are set. Check those copy routine and see if there is any data is being copied from table VBAP
    Similar to above also check transaction VTFA for copying routine (if any)
    As a standard SAP even we create an invoice with reference to the delivery document, still there are some data which is being copied from a sales order i.e. all pricing relevant information is copied from your sales order and not from delivery.

  • Short dump while marking Sales order Line item for Reason for rejection

    Hi All,
    Need your help in the following regards.
    In system Client is creating a sales order with 100+ line items and for each line item a project gets created automatically at the background as it is a make to order senario. Now what is happening is customer suddenly call's and tells to stop few line items tempororily till he gives go-ahead, so our client is marking it for reason for rejection, while doing this the network created for a project is getting deleted. Once we receive conformation for that line item agin to proceed we are removing the reason for rejection and it was suppose to create a new network, but system is taking huge time to do this and going for a shout dump saying time-out error, in few cases it is creating the network.
    Need your valuable inputs how we can address this issue to avoid the short dump. We have increased the buffer time to 30min also.
    Thanks
    regards
    kishore

    Hi,
    You can easily list out sales order that have been assigned reason for rejection..simple extract of table VBAP-ABGRU = not blank.
    This report should list out the sales order number along with some more details, as required.
    Now the report should allow to choose the documents i.e. like giving checkboxes in the left most side and once the user chooses the sales documents he wants to get processed--> the program should call change Sales Order FM or BAPI. Execute this in background.
    Regards,
    Raghu.

  • Fields in sales order item level for pricing

    01.02.2011
    Hi friends,
    I have a requirement wherein i need at least 3 additional fields at the item level in the Sales Order for pricing determination i.e i want this field to be used in the condition table. Since these fields should have list of values also, I find the fields Material group1, material group2 and material group3 ideal ones. I wont be using this field in the material master but inputting some data in these fields through development at the sales order level. How can i get these fields in the catalog?  Please suggest.
    Regards,
    Uday

    The following communication structures are relevant in pricing:
    KOMK (pricing communication header)
    KOMP (pricing communication item)
    KOMG (allowed fields for condition structures)
    For technical reasons, communication structure KOMG is used. It combines the fields from KOMK and KOMP that are relevant for pricing in the standard system and are offered in the field catalog of condition tables. If you want to use a new field in the field catalog, you must add the field to KOMP or KOMK in the following INCLUDES:
    header data in INCLUDE KOMKAZ in KOMK
    item data in INCLUDE KOMPAZ in KOMP
    When you use INCLUDES, the field is automatically added to KOMG and the field catalog.
    The routines for assigning values to the new fields in order processing are found in member MV45AFZZ. Use the following user exits:
    USEREXIT_PRICING_PREPARE_TKOMK (header fields)
    USEREXIT_PRICING_PREPARE_TKOMP (item fields)
    The routines for assigning values to the new fields in billing are found in member RV60AFZZ. Use the following user exits:
    USEREXIT_PRICING_PREPARE_TKOMK (header fields)
    USEREXIT_PRICING_PREPARE_TKOMP (item fields)
    Examples for using new fields in pricing
    Example 1
    In the first example, parts of a document field are to be used in pricing. You want to use the first three digits of the product hierarchy (PRODH) for pricing, for example. Proceed as follows:
    1. Check the data elements in the standard system.
    2. Since there is no such data element you have to create the new data element ZZPRODH1. Also create a domain with the length "3" and the data type "CHAR" for the new data element.
    Remember that new data fields must start with the letters "ZZ" or "YY", since SAP reserved these letters to protect them from being overwritten during a release upgrade.
    3. Check whether the product hierarchy (PRODH) is found at header or at item level.
    In table VBAP, document field PRODH is defined as an item field.
    4. Integrate the field name ZZPRODH in the communication structure KOMP using the INCLUDE KOMPAZ and allocate the data element PRODH to it.
    5. Activate the structure.
    6. Check in which table the field PRODH exists.
    The field is in table VBAP (sales document: item data).
    7. Assign a value to the new field in the FORM routines for sales order processing and billing using the appropriate user exits:
    In sales order processing the user exit is found in member MV45AFZZ. The complete statement is:
    FORM USEREXIT_PRICING_PREPARE_TKOMP.
    MOVE VBAP-PRODH(3) TO TKOMP-ZZPRODH.
    ENDFORM.
    The routines for assigning a value to the new fields in billing are found in member RV60AFZZ. The statement is as follows:
    FORM USEREXIT_PRICING_PREPARE_TKOMK
    MOVE XVBRP-PRODH(3) TO TKOMP-ZZPRODH.
    ENDFORM.

  • Adding Sales Order Lines repeating for all orders

    I have a C# program whereby I am trying to get Sales Orders from one database (source) and create them in another database (destination). I asked a question on how to set the current line and was helped.
    The only problem now is that for all Business Partners, the lines being added are all the same (i.e. with the same row numbers and details as the first Sales Order to be entered)
    Source database (TCount represents the number of lines in the document & the DocNum each separate sales order)
    Destination database (compare columns with above)
    As you can see the rows of Source docnum 6 are repeated in the destination table always
    How can I fix it so that it adds the sales orders properly? My code snippet below:
    unaddedSOs = sList.Except(dList).ToList();
                // Add the Sales Orders that are missing to destination database
                SAPbobsCOM.Documents sboSO = (SAPbobsCOM.Documents)oCompanyDestination.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oOrders);
                if (unaddedSOs.Count > 0)
                    // Loop through unadded Sales Orders
                    foreach (var item in unaddedSOs)
                        // Set properties of the Sales Order object
                        sboSO.CardCode = item.cardCode;
                        sboSO.CardName = item.cardName;
                        sboSO.DocDate = item.docDate;
                        sboSO.DocDueDate = item.docDueDate;
                        // Add Sales Order Document Lines
                        SAPbobsCOM.Recordset rsLines = oCompanySource.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset);
                        // Get Sales Orders from source database                   
                        rsLines.DoQuery("SELECT ItemCode, Quantity, Price FROM RDR1 WHERE DocEntry = '" + item.docNum + "'");
                        rsLines.MoveFirst();
                        if (rsLines.RecordCount > 0)
                            int row = 0;
                            while (!rsLines.EoF)
                                sboSO.Lines.SetCurrentLine(row);
                                sboSO.Lines.ItemCode = rsLines.Fields.Item("ItemCode").Value;
                                sboSO.Lines.Quantity = rsLines.Fields.Item("Quantity").Value;
                                sboSO.Lines.Price = rsLines.Fields.Item("Price").Value;
                                sboSO.Lines.Add();
                                rsLines.MoveNext();
                                row++;
                        // Try to add the Sales Order to the database        
                        int lRetCode = sboSO.Add();
                        if (lRetCode != 0)
                            int temp_int = lErrorCode;
                            string temp_string = sErrorMsg;
                            oCompanyDestination.GetLastError(out temp_int, out temp_string);
                            // Incase adding a Sales Order failed
                            if (lErrorCode != -4006)
                                // Display error message
                                MessageBox.Show(lErrorCode + " " + sErrorMsg);
                MessageBox.Show("Syncing Complete!!!");
    Any help appreciated,
    Regards Kinyanjui

    Hi Kinyanjui,
    Are you using the same SO for all unadded orders?
    unaddedSOs = sList.Except(dList).ToList();
    // Add the Sales Orders that are missing to destination database
    if (unaddedSOs.Count > 0)
        // Loop through unadded Sales Orders
        foreach (var item in unaddedSOs)
            SAPbobsCOM.Documents sboSO = (SAPbobsCOM.Documents)oCompanyDestination.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oOrders);
            // Set properties of the Sales Order object
            sboSO.CardCode = item.cardCode;
            sboSO.CardName = item.cardName;
            sboSO.DocDate = item.docDate;
            sboSO.DocDueDate = item.docDueDate;
            // Add Sales Order Document Lines
            SAPbobsCOM.Recordset rsLines = oCompanySource.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset);
            // Get Sales Orders from source database               
            rsLines.DoQuery("SELECT ItemCode, Quantity, Price FROM RDR1 WHERE DocEntry = '" + item.docNum + "'");
            rsLines.MoveFirst();
            if (rsLines.RecordCount > 0)
                int row = 0;
                while (!rsLines.EoF)
                    sboSO.Lines.SetCurrentLine(row);
                    sboSO.Lines.ItemCode = rsLines.Fields.Item("ItemCode").Value;
                    sboSO.Lines.Quantity = rsLines.Fields.Item("Quantity").Value;
                    sboSO.Lines.Price = rsLines.Fields.Item("Price").Value;
                    sboSO.Lines.Add();
                    rsLines.MoveNext();
                    row++;
            // Try to add the Sales Order to the database     
            int lRetCode = sboSO.Add();
            if (lRetCode != 0)
                int temp_int = lErrorCode;
                string temp_string = sErrorMsg;
                oCompanyDestination.GetLastError(out temp_int, out temp_string);
                // Incase adding a Sales Order failed
                if (lErrorCode != -4006)
                    // Display error message
                    MessageBox.Show(lErrorCode + " " + sErrorMsg);
            Marshal.ReleaseComObject(sboSO);
            GC.Collect();
    MessageBox.Show("Syncing Complete!!!");
    Best regards,
    Pedro Magueija

  • How to split cost allocations for sales order lines?

    Has anyone here solved a requirement to split the cost of goods sold from a service request debrief.
    The scenario is -
    1.  A debrief of a service request is completed.
    2.  Material is issued and technical labor used and expenses incurred.
    3.  I am hearing that in Oracle Service, the material is only costed but not the technical labor and expenses.
    4.  No splitting can occur in any of the cases through standard Oracle?
    5.  We have gone down the path of creating sales order line types for each department (unique code combination) and then splitting the COGS in SLA.
    6.  This way, we have to create items for labor and expenses.
    Is this the only semi-standard way.
    Thanks for your thoughts in advance.

    Hi
    I have reverse the sales order settlement, PP order settlement to sales order and I have also done KB11N for transfering the cost to the new production order.
    The only problem is I was unable to transfer labour hour confirmation as cost element used for this are not for transfering cost. If I will reverse the confirmation in PP order system will reverse material movement also which I don't want any more. Can you please tell me how to I reverse the Labour hours with out affecting goods movement?
    Many thanks

  • Sales order item level text missing

    Hello,
    An issue, our client is not getting text in the sales order item level for one item catgory only. however for the other item category he is getting sales text in item level.this is applicable for all the items in a sales order-meaning, all items are either having text or no text.all the configuration settings are fine.where can be the problem? solutions plz.
    Regards,
    Raj

    Hi,
    Goto VOTXN transaction and select item text for sales document and then see item categeory is assigned to text procedure.
    Make sure right text procedure should be assigned to item categeory(for ex: sales order item text procedure to be assogned to sales order item category) ,also check access sequence for text.
    Please get back with your observations.
    Regards,
    Chandra

  • User Exit to change the Ship-to party address at Sales Order headder level

    Hi,
    I have requirement like this......
    I need to change the  ship-to party address at Sales Order headder level. for that which user exit i need to  use and which structure i need to use to update the transaction.
    I used : userexit_save_document_prepare, in that i passed data to 'xvbpa' and 'xvbadr' structures. even though it is not update the transaction.
    Please let me know the answer.
    Thanks,
    Satish.

    Hi Satish,
    Step1. Create new Data Copy Routine using Tcode VOFM.
    Step2. *-----------------------------------Ship to Party from contract
       IF CVBPA-PARVW = 'WE' OR
          CVBPA-PARVW = 'SH'.
        REFRESH IT_STP.
        SELECT KTOKD
               A~KUNNR
               NAME1
               NAME2
               A~ADRNR
               FROM VBPA AS A INNER JOIN KNA1 AS B ON A~KUNNR = B~KUNNR
               INTO CORRESPONDING FIELDS OF TABLE IT_STP
               WHERE VBELN = CVBPA-VBELN . 
    Step3.
       CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
            EXPORTING
              ENDPOS_COL   = 80
              ENDPOS_ROW   = 10
              STARTPOS_COL = 10
              STARTPOS_ROW = 5
              TITLETEXT    = 'Your Title'
            IMPORTING
              CHOISE       = T_SELIDX<=====Index No of selection
            TABLES
              VALUETAB     = IT_STP
            EXCEPTIONS
              BREAK_OFF    = 1
              OTHERS       = 2.
    Step4.
           READ TABLE IT_STP INTO WA_STP INDEX T_SELIDX.
            IF SY-SUBRC = 0.
              CLEAR:CVBPA-KUNNR, CVBPA-ADRNR.
              MOVE WA_STP-KUNNR TO CVBPA-KUNNR.
              MOVE WA_STP-ADRNR TO CVBPA-ADRNR. <========Address ID (Change Here).  
           ENDIF.
    Regards,
    Amrendra
    Moderator Message - Please do not reply to old, dormant threads.
    Message was edited by: Suhas Saha

Maybe you are looking for