Hard-Code address on 1099 Forms (Standard Report)

Hi All,
We need to do the Hard-Code address on 1099 Forms (Standard Report) in Payables module.
Is there any way do this?
Thanks in advance.
Thanks,
Astik Mondal

It allows only 30 characters of the address.
Refer 5th question in the Note 110390.1 where they suggested a workaround.
Regards,
Srini

Similar Messages

How to change company code address in Print form used

Hi.
I have maintained the company address under the gobal data in config. However when I used the print form to print out the invoice from AP (FBL1N -> correspondence -> Request), the address of the sender / company code is different.
How do I change the address from the form / invoice ? How to find out where the form pulls the data from ? I tried SE71 but couldn't trace out anytime.
Please help.
Thanks.
Angel

Check your configuration.
Please follow the following steps:
IMG ==> Financial Accounting ==> Accounts Receivables and Accounts Payables ==> Customer Accounts ==> Line Items ==> Correspondence ==> Make and Check Settings for Correspondence
Define Correspondence Types
Create Report Variants for Correspondence
Assign Programs for Correspondence Types
Define Form Names for Correspondence Print (even you assign your form to blank company code also)
If you complete these steps you will get the spool request get generated.
Please ask your ABAPer to change the company code address and logo etc. on the form.
You go to FB12 - request for the statement
then go to F.61
Then go to SP02 - Take print out.
Regards,
Ravi

Variant form standard report to z report

hi guys,
I have copied a standard program to my z report.But when i execute the standard report its picking the variant from LTDX table and its working fine.But when i run my zreport its not showing the same output as in my standard progrom.So how i need to copy the same variant to my zreport

hi thanks a lot guys..Let me tell you my requirement.For tcode IW47, when it executed its not displaying the field OPRATION SHORT TEXT field (ltxa1).So i copied the IW47 to my z report and debugged the whole code.But still unable to get the field in output.Its getting populated in field catalog.Where might be the problem.???

Hard code address

hi sap,
i am currently modify the existing sap script.
the requirment is i need give the address window left side where i have to hard code the the address
i have created the window and given the address as like this
/E           HEADER_DELADDRESS
ZL           <H>DELIVER TO:</>
/:           ADDRESS DELIVERY PARAGRAPH AS
/:           SHOSHOLOZA MEYL HEAD OFFICE
/:           SUPPLY CHAIN SERVICES
/:           BRAAMFONTEIN
/:           ENDADDRESS
when i want to test i just looked at the print preview but i dint get the address what would be the problem and why dint get is there any way that i need do other than this
please tell me as how to create and display the address.
regards,
laya.

Hi,
Please try this
/:   ADDRESS PARAGRAPH AS
/:     TITLE        'Your title name for eg &REGUH-ZANRE&'
/:     NAME        'Name'
/:     STREET      'Street Name'
/:     POBOX      'Postal box'
/:   ENDADDRESS
If you want to hard code the address.....you need not give it within ADDRESS and ENDADDRESS
You can either use * which is default paragraph format or you can specify some paragraph format like P1
*STREET NAME
* TITLE
* POBOX
Hope this helps!
Regards,
Sandhya
Edited by: Sandhyap on Jun 24, 2009 12:38 PM
Edited by: Sandhyap on Jun 24, 2009 12:41 PM

How to add additional fields to zreport which contains standard report code

Hi Experts,
In order to add additional fields to standard report i copied the code into zreport but i am unable to add additonal field into report because the code is looking so complex.
standard report:AQZZ/SAPQUERY/FKF1============
     or
sapmenu->accounting->financial accounting->accounts payable->information system->reports for accounts payable accounting->master data->S_ALR_87012087-Addresslist.
Additional feilds to add is :Region,company code,country
Please let me know how toidentify ALV and guide me how to solve this.
Regards,
naresh.

Hello Naresh,
First check whether these three fields are available in the text elements area.
Please write your code in the subroutine %comp_ldesc.
Repeat the code for your three new fields
perform ldesc(rsaqexce) using 'G00010000X010       00 A1'
    %txt1 %txt2 %txt3 'LFA1-LIFNR' LFA1-LIFNR 'LFA1-LIFNR'.
read table %textpool_langu into %textpool_langu_line
                             with key ID = 'I' key = 'A01'.
if sy-subrc is initial. %txt1 = %textpool_langu_line-entry.
else. %txt1 = %txt_unknown.
endif.
So this subroutine will give you the basic list. Now Program is creating ALV with this basic list. So I think you don't need to worry about that. Please have a thorugh look at the code over this perform, and write accordingly.
I think this is enoogh.
Please update if you got the solution, which will be informative for others.
regards,
Antony Thomas
Edited by: Antony Thomas on Jul 27, 2010 7:57 AM

Standard Reports to Capture Orphaned positions

Hi there
Can anyone let me know what are the standard reports to capture orphaned positions.
Regards
Kushagra

thanks for the info.I tried but no such t-code exists in my system.
Is there any other t-code which fetch such a standard report..??

In SAP Script how to hard code my Company address in footer window

Hi All ,
In SAP Script how to hard code my Company address in footer window .
Ex : in YB_F140_ACC_STAT this script i want to keep my company address, i want to hard coad , i dont want to use any field from table.
Please give me step by step.
Thanks
Sridhar

Hi,
You can make use of standard text...
create a standard text in SO10 with your company address
and in the footer window of your script.. use include text and provide the name of the standard text you created in SO10.
In the text editor... goto insert > text> standard
You get popup give the name of the text name id and language
regards
padma

1099 Misc reporting for US in SAP Standard report not containing any value

HI All,
In my current clients requirement is to get the SAP Standard reprort for 1099 Misc reporting for US
1) Accordingly i have done configuration for Withholding tax for US with tax type FE
2) There are 14 WHT Tax codes under FE , like 01 = Rent , 02 = royalty, 03 = other income etc.
3) Assigned Tax type with Co. Code
4) Activated WHT tax at Co. code
5) Created WHT country US
And also assign WHT tax type FE and respective tax code to vendors in Accounting info in Vendor Master
Posted couple of vendor invoices and made payment for those also
Then after this when i run the SAP Standard report for 1099 Misc reporting for US , then the output contains with no data.. but only contains vedor names and WHT tax code which i have assigned..
I think i have missed some configuration may be . Can any one let me know the detail step by step config and process how to get proper out put in 1099 Misc reporting for US in Standard reporting..
Regards,
Sandip

Hello auroar,
I followed the path that you provided and that lead me to this part of the tree: Define File Format for Withholding Tax Reporting...This is where I found the information that I needed.
Thank you very much.
-Patrick
Edited by: Patrick Smith on Oct 22, 2009 8:41 PM

Any SAP standard approach to display the currency symbols without hard code?

Hi,
I want to display $ symbol on the report ouput, for the how can we display currency symbols without hard code?
Thanks,
Aarti

Not much chance... If such a standard table exists, then during Euro creation, an OSS note would have been released to add the € character, and I found none, fell free to perform some search on OSS with keywords I didn't try.
So better build your own customer table with foreign relaction to TCURC.
NB: Look for symbol list ($, £, €, ¥, etc.) in sites like Currency symbol - Wikipedia, the free encyclopedia. I hope your system is Unicode.
Regards,
Raymond

1099 form/report

Hi,
I have the following issues on 1099 forms/reports.
(1) Is there any standard form in SAP that would print on preprinted IRS 1099 forms. Or, is there one, which I could use to print the entire form.
(2) When running S_PL0_09000314 - 1099-Misc transaction, the Tax Number 2 is not getting populated against the vendors, even though I have maintained the employer identification number (Tax Number 2) in the vendor master records. What could be the problem?
Thanks for your help

Issue resolved. The form is IDWTCERT_US_1099MISC.

Hard-code form variable

Rebecca:
This is the standard call for a Portal-built form:
PORTAL.wwa_app_module.link (
p_arg_names => PORTAL.wwv_standard_util.string_to_table2('_moduleid:loc_code'),
p_arg_values => PORTAL.wwv_standard_util.string_to_table2('2728668008:BHM'));
The 1st parm is required, it id's the form to call; the 2nd parm, LOC_CODE, I'm having to hard-code. It relates to the specific page from where this form is called; therefore, I've several places throughout the site where I call this form and the LOC_CODE value is different. I've a field on on this form that gets populated with this value when the form comes-up, but I have it hidden. I can also use this value to drive the contents of a combo-box on the form. That's what I really needed to do; restrict the selection there based on where the form was being called from.
Hope that helps...
Ed in Tampa

Hi,
I like the docReady event, as it is the last event to fire as the form is being rendered and does not fire again. Note, if the form is Reader Enabled, then the docReady event will fire twice. See discussion here: http://forums.adobe.com/message/3040556#3040556 and example form here: http://assure.ly/gW3RNr.
I have an example here that uses the docReady event and didn't notice a performance issue (but then it is a small form): http://assure.ly/frjYW5.
Niall

Standard report(t.code) for open deliveries

Hi Friends,
can anyone give me standard open delivery report T.code.
thanks
nitchel

Hi nitchel
check the standard reports which may help you
        VL06 ---      Delivery Monitor
*     VL06C --     List Outbound Dlvs for Confirmation*
*     VL06D--      Outbound Deliveries for Distribution*
*     VL06F --     General delivery list - Outb.deliv.*
        VL06O ---      Outbound Delivery Monitor
Regards
Srinath

How to get the output of a standard report RFBILA00 in PDF form.

hi,
I have to get the output of the standard report RFBILA00 in the PDF form.
Thanks.

Hi Rao,
you can run your report RFBILA00 in background and in background job you can add one more step, next in that step you can add custom report like zsubmit .
job should be set like
step1: RFBILA00 with variant.
Step2: zsubmit report with variant.
In Zsubmit report you can read, your first step spool using FM GET_JOB_RUNTIME_INFO
and pass that spool in the FM CONVERT_ABAPSPOOLJOB_2_PDF.
when second report run in job you can set your target like download in the server or send email etc.
Regards,
Prasenjit

How Can i hard code variable at reports in obiee 11g

Hi
I created as variable at rpd and using variable i am able to get expected results.
But i dont want to use variable directly , how can i hard code variable code at report and get same results.
Can anyone help me on this.
Thanks

Not clear what you trying to achieve, try to go thru given info.
The statement 'select 1 from dual' in init blocks works using connection pool, but the same will not work in report since report understands Presentation Catalog objects.
In the report your query suppose to be like select 1 from Subject area where someColumn >0
If helps pls mark

Add fields to standard Report for T-code-S_PL0_86000028-Financial Statement

Hi Sap Gurus,
The standard trial balance report does not generate the trial balance report with the parked documents, since the parked documents do not update the posted documents tables.
now i have to add that colum next to the normal items column and display Parked Document data.
so please suggest me which is the best way to do it.
1. Either copying the standard to Z prog and do it
2. Or enhance in any point in the standard Report.
this report seems to have dynamic programs in it so confused how to start on.
Tr code is: S_PL0_86000028

Hi Sagar,
Adding a New field is a new requirement. Its a new developement and it would be good idea to
go ahead and develope a Z-program.
Using Enahancement- there is high possibility of affecting the functionality...
Regards,
Kittu

Hard-Code address on 1099 Forms (Standard Report)

Similar Messages

Maybe you are looking for