Hard currency is not valuated in FAGL_FC_VAL along with local and group currency

Hi All,
I have the below system settings for FOREX revaluation. The revaluation is not happening for Hard currency along with local and group currency. The test data and other settings seams to be fine as the below mentioned workaround works perfectly for hard currency revaluation.
I would like to take your expert feedback on this issue to confirm whether this is how SAP works or its an issue with FAGL_FC_VAL program.
System Settings:
Currencies in company code
local currency      group currency      hard currency
10                             30                         40
USD                          USD                    UYU
FOREX settings:
Work around found:
Define two Valuation area, say
1. Valuation Area: A1 which will have currency type 10 and 30.
2. Valuation Area: A2 which will have only the currency type 40.
3. Run FAGL_FC_VAL twice for these area.
Issue with this work around:
1. The valuation area is assigned to one accounting principle (which is in turn assigned to a specific ledger).
2. Thus, if I have different accounting FOREX process to be followed in different ledgers (say IFRS ledger, Local Ledger, Tax ledger) then I need to create 2 valuation area (as per above workaround) for each ledgers and run FAGL_FC_VAL for each of these valuation areas.
Thanks & Regards
Nikhil Kothari

Hi Experts,
Any views on the above issue?
Thanks & Regards
Nikhil Kothari

Similar Messages

  • 0fi_gl_6 - available local and group currency

    Hi,
    I have a problem with DataSource  0fi_gl_6. I need to consult accumulated balance in local
    and group currency. I know in GLT0  this information is available.
    In spite of this I could not see them when I load it in BW.
    Can you help me?
    Thanks.

    Dear Ana, Dear Catherine
    Maybe I come a bit late now, but I faced the same issue this afternoon.
    Datasource 0FI_GL_6 is still in version 3.x. So it seems that you need to create two different Infopackages for the initialization of the delta, one selecting Currency Type 10 and one for Currency Type 30. The Delta-update infopackage will update the selection automatically once the system is initialized.
    Maybe 1st check in RSA3 in the sourcesystem if the extractor gives any data for your selection. 2nd create the 2 Initialization Infopackages. Then 3rd open the infopackage, go to 'Scheduler' --> 'Initialization options for source systems' and delete the old entry for 0FI_GL_6. 4th go to RSA7 in the source system and verify if the entries are really gone; if they're not gone, delete them manually. Then run both infopackages. From now on, the delta update will update for both, Local and Group currency.
    I hope this helps
    Josef

  • Unable to clear GL due to Val difference between Local and group currency.

    hi,
    We have an open item managed Revaluation G/L account in our company code which has a local currency USD.There are some documents posted to this account in both USD and CAD. But when we analyze the docs posted in CAD we found a valuation difference in the local currency(USD) and the Group currency(again USD). I am not sure of the reason for this. But due to this difference we are unable to clear this account. Please let me know if anyone can think of how to clear this particular GL account.
    Rgds,
    Raj/
    Edited by: raj3875 on Oct 8, 2009 11:37 PM

    We have an issue even with document currency in USD. there is a valuation difference between Local currency (USD) and Group currency (USD).
    For example:
    Doc currency = 0 USD
    Local Currrency = 171,000 USD
    Group currency  = 0 USD
    Because of this I am not able to clear the account. Not sure why there is a difference inspite of the same currency. I try to clear it in F-04 but I get the below error:
    Posting is only possible with a zero balance; correct document
    Message no. F5060
    Regards,
    Raj

  • Realized exchange rate difference in local and group currency

    Hi Friends,
    For a company code with local currency as Euro and group currency as USD, the setting in TR code OB22 for group currency is: Translation taking first local currency as a basis. When the open items are cleared, SAP posts difference in local currency and group currency. Sometimes, document currency is also group currency i.e. USD. The realized exchange difference is posted in Euro but it is not converted from Euro to group currency. Instead, system just calculates difference in group currency by comparing the value in group currency at the time of original transaction and when the transaction is cleared. Does anyone have dealt with such requirement and is there a way to be able to translate realized exchange differences from local to group currency?
    Thanks and regards,
    Pinky

    >Sometimes, document currency is also group currency i.e. USD.
    Can you explain, it's because of your settings or because of SAP?

  • How to report with local and global currency in Deliveries?

    Dear all,
    i am working on a delivery scenario where i have in the datasource NETWR(Net value
    ), WAERK (Document currency).
    I would like to be able to report with local currency and global currency.
    Could you please help by explaining how to proceed?
    Thank you.
    Cheers

    Hi Gilo,
    You have to check with the business on the following.
    1) What would be the key date of currency conversion? Is this any document date from the transaction ( Delivery Date ) or report execution date?
    2) What would be the target currency ? ( for local and Global currency ). Whether this can be determined at the time of loading or should it be based on user selection criteria?
    3) What is the exchange rate type that has to be used? ( for example 'M' ).
    Once you have the answers to these questions, you can decide whether to do the currency conversion in the backend or front end in the report during runtime.
    For example, if the user wants to input the target currency on selection variable and wants to use the exchage rate as of the report execution date, then this currency onversion has to be done at runtime.
    For more details,Please check help.sap.com or SDN
    Thanks,
    Krishnan

  • Currency Translation from local to group currency in AP /AR

    Hi Gurus,
             I have reporting requiremtents where in i need to show KF;s in local and group currency. I am using standard extractor AP_4 and AR_4. These extractors does not bring KF's in Group currency but only in local and document currency.
    Can anyone tell me what is the best way to go about carrying out the currency translation from local to glocal currency for AP and AR.
    Thanks in advance and yeah points guranteed for helpful answers...
    Cheers..
    Sam

    I take it you mean the extra currency in the company code config (ie group reporting)
    Just unhide the fields DMBE2 and HWAE2 from the extract structure and allocate a new infoobject to them - then add to eith your transformation or transfer rules/update rules and add to the cube

  • Vendor and Customer Hard and Group Currency balances

    Please let me know the table names of Vendor, Customer and GL balances for Hard and Group currencies (Ex KNC1 for Customer balance in Company Code Currency)
    Ramesh

    I don't think they are available.
    But if you have any requirement in the customization report, you can convert the values of KNC1 with TCURR table rates based on the posting date.
    Rgds
    Murali. N

  • Can we add button in query region  along with go and clear

    Hi Friends,
    i have a requirement as below steps-
    1)i have developed search pgae by using query regiion
    2) in pgae,first we have search items,go and clear(submit buttons), table region.
    3)here go and clear buttons came automatically.
    4) i can able to add button in front of the page and end of the page.
    4) my requirement is i need to add one more button along with go and clear(here go and clear button are in between search items and table region) .
    5)i am not able to add button along with go and clear.
    Can any one know how to do this--
    Thanks in Advance
    vamshi

    Hi Vamshi,
    You can not create extra buttons in Standard Query region.
    Alternatively you can create your custom region for the search and there you can add a button. If you don't need advanced region, you can create the custom region in place of standard one.
    Anoop

  • Difference in Local currency and Group currency Balance

    Hi,
    I have a query where ...
    Company code has 2 currencies ;Group currency is USD and Document Currency is GBP
    This GL account is zero balance account . It has alredy set up in Document spitting customization setting
    Through FB03 normal view we can see the zero balance  but while displaying the document general ledger view with option of group currency  ; it is showing zero balance for the local currency and  balance amount  for group currency USDu2026
    Can I get any suggesion where should I need to check for this?
    Thanks in Advance

    Hiten,
    We are on ECC6.0. For us the problem is ongoing production orders.
    Based on SAP notes about excluding zero balance orders from settlement process, I tried to close such orders but system does not allow it as it sees the parallel currecy balance.
    Thanks,
    Sanjay Wagh

  • I've been having trouble with in getting iMessage to send messages. I decided to connect to my VPN (along with wifi) and it worked. Why won't it work via my wifi connection alone?

    I've been having trouble with in getting iMessage to send messages. I decided to connect to my VPN (along with wifi) and it worked. Why won't it work via my wifi connection alone?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    Send an iMessage as a Text Message Instead with a Quick Tap & Hold
    http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • Fixed assets depreciation wherein local and system currency is differeent

    Hi,
    We just have a question regarding the Fixed Asset Depreciation if Local and System Currency is different.
    Setup of Currency:
    Local Currency = USD
    System Currency = Peso
    During monthly amortization the depreciation is in Local Currency (USD) converted amount at the time of acquisiton if other currency is used. The corresponding system amount which is in Peso will use the FOREX rate based on the posting date of the depreciation run.
    What we want is to maintain a correct lapsing schedule of Fixed Assets in both PHP & USD, and both following the accounting standard.   Therefore, to be in line w/ the standard, we have to use the historical rates.
    Is it possible that when the depreciation was posted in system currency the historical or the acquisition rates will be used not the conversion rate when the depreciation was done?
    Thanks,
    Janice

    Hi Janice,
    I don't think that is possible to maintain system consistency.  if you could assign FOREX arbitrarily, what is your accounting principle?
    Thanks,
    Gordon

  • HT201263 I did not sync my iPod Touch with iTunes and I have forgotten my password.  How do I unlock it?

    I did not sync my iPod Touch with iTunes and I have forgotten my password and now it is locked.  I have the recovery mode screen at "conect to iTunes", but iTunes is not recognizing it.  How do I unlock it?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen        
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • IOS 7.0.3 did not fix the mirroring issue with ATVs and AirServer.  Anyone have an idea what needs to be done?

    iOS 7.0.3 did not fix the mirroring issue with ATVs and AirServer.  Anyone have an idea what needs to be done?  The only solution we have found is to reboot the iPad.  We don't have the option of restarting the wireless as so many people are on and it would further disrupt classes. 

    iOS 7.0.3 did not fix the mirroring issue with ATVs and AirServer.  Anyone have an idea what needs to be done?  The only solution we have found is to reboot the iPad.  We don't have the option of restarting the wireless as so many people are on and it would further disrupt classes. 

  • Urgent : OBIA - Handling multiple Global, Local and Document Currencies

    All,
    I need input on how to configure multiple currency codes in DAC for OBIA 7.9.6.x
    My client's business goes around the the world and with multiple local currencies.They also need reporting currency to be multiple like in Euro, USD etc.
    I went through a couple of threads in this forum,like -
    Re: Configuring Global Currencies in BI Apps 7.9.6 for EBS 11.5.10 Source
    Re: How we are using Global, Local and Document Currencies  in DAC.
    But I have some confusion regarding the configuration of DAC's 3 Global currency codes.
    In order to fulfill my requirement - should I add additional codes in DAC?
    Basically How am I supposed to handle multiple Local,Document and Global currencies? And then possible changes in rpd/reports required also?
    Regards,
    Krish

    Currencies are discussed in the Setup and Configuration Guide here:
    7.1.1.2 How to Configure Global Currencies
    To configure the global currencies you want to report in your warehouse:
    In the DAC Client, display the Design view.
    For more information about logging into the DAC, see Section A.1, "How to Log Into the DAC Client".
    Select a container from the drop down list to the right of the Execute button.
    Display the 'Source System Parameters' tab.
    Locate the following parameters and set the currency code values for them in the 'Value' box:
    $$GLOBAL1_CURR_CODE (for the document currency).
    $$GLOBAL2_CURR_CODE (for the local currency).
    $$GLOBAL3_CURR_CODE (for the global currency).
    Make sure that you spell the currencies as they are spelled in your source OLTP system.
    Save your changes.
    As far as for PLP items, those are Post Load Processing elements that perform cleanup tasks after the Base Warehouse tables have been loaded. They should never be modified and frankly run without any issues provided the rest of the plan executes properly. Do you have a specific quesiton about a PLP?

  • Where to enter Due Date and group currency amount in BAPI_ACC_DOCUMENT_POST

    Hi,
    I have some fields in a flat file . I need to post a document by F-04. Can anyone let me know where to enter the fields 'Due Date' and 'Group Currency Amount' for the line items?
    Thanks in advance..
    GC.

    Hi,
    I have some fields in a flat file . I need to post a document by F-04. Can anyone let me know where to enter the fields 'Due Date' and 'Group Currency Amount' for the line items?
    Thanks in advance..
    GC.

Maybe you are looking for

  • Need help with Image Gallery tutorial.

    Hi all, No response from Apex Listener Forum...moved here.... Apex Listener - 2.0.2.133.14.47 Apex             - 4.2.2.00.11 When running Image Gallery application as per tutorial, page just show a blank screen with no image upload button. Am using F

  • Help: lost our content area portlet (site)

    On the "Oracle Portal Navigator" page under the "Content Area" tab someone deleted the "Site" portlet. How do I add the "Site" portlet back to the page? I clicked on the customize page and tried to find the portlet to add but it is not listed. I then

  • Is there a way to recover contacts after switching from Samsung S3 to I-phone 4s

    is there a way to recover contacts after switching this weekend from Samsung s3 to i-phone 4s

  • Bb media manager problem

    whenever i go into my media manager my BB never shows up as an option of where to put music and stuff i click on the blackberry folder but it says to turn on my mass media but its always on  why? how do i fix? Solved! Go to Solution.

  • Display problems imac

    how many people have problems with imac 2011 display?