Hard drive restore- issue

I had to restore my hard drive (mac) and reloaded from a Backup (yeah!) but Adobe requires that I
Uninstall(done), run a Cleanup (done) and reinstall from a new downloaded DMG file. (why can't this be easier?)
Upon trying to start the install I get " Install App can't be opened because it is from an unidentified developer"
So, now I have nothing. How do I install? This was a Web Purchase in 2011 so I do not still have that DMG file.
Please advise.
Pat

http://wiki.machangout.com/howdoi/how-do-i-enable-installation-unknown-developers-applicat ions-osx-108

Similar Messages

Hard Drive Encryption Issue

This is in regard to hard drive encryption issues in my USB Hard drive. I have Windows 7. I was encrypting my USB hard drive and
was able to enter a password. However, I did not receive any prompt to save the Bitlocker recovery key. During encryption process, I received an error. The encryption process was unsuccessful. However, now when I plug-in the hard drive, I receive the
following message on the status bar:
Application and Device Control rule Block writing to removable media. Unencrypted drive found (No_Encrypted_Found) has blocked edpa.exe trying to access Volume
{e3901a75-f1ff-11e1-817c-806e6f6e6963 alpha-numeric number appearing here}
When I try to open the drive, it asks for a password. When I enter the password, I am receiving the following error message:
Bitlocker Drive Encryption failed to recover from an abruptly terminated conversion. This could be due to either all conversion logs being corrupted or the media
being write-protected.
I have read that Bitlocker repair tool can help resolve this issue.
However, I just have the password that I had set to encrypt the drive and Bitlocker recovery key identification. Can this help to get access to my hard drive data using the Bitlocker tool.

Checked this ?
http://answers.microsoft.com/en-us/windows/forum/windows_7-security/bitlocker-drive-encryption-failed-to-recover-from/232e812b-4f7a-e011-9b4b-68b599b31bf5
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Hard drive space issues

I have some hard drive space issues.
At present I only have about 13GB remaining on my 40GB hard drive, which is not necessarily an issue except that I have almost nothing installed/saved on my machine. I have 1 CD ripped to iTunes, no photos in the iPhoto library. I did a quick look with Disk Inventory X and found that the "Printer" folder is 3.2GB - can I get rid of some/all of that as I don't intend to print from the machine?
What is filling my disk? As far as I can tell the OS should only take up around 3 GB so where did the other 24GB go? Where, oh where?

Yes, you can delete printer drivers you don't use. OS X takes up far more than 3 GBs. A pretty minimal installation is nearly 7 GBs. Your computer also may have came with pre-bundled software applications (not standard OS X applications.) OS X will also use potentially 10 GBs of space on a temporary basis for temporary files, log files, and cache files. So for a 40 GB drive it's not too surprising to have only 13 GBs free. Perhaps it's time for you to put in a larger hard drive. You can purchase hard drives at:
MacSales.com
Buy.com
NewEgg.com
The Mini uses a notebook drive. If you have a pre-2006 (Intel) model it uses an ATA drive. After that year they use SATA drives.

Hard drive syncing issues "!" HEEEELLLLPPPP!

Hard Drive syncing issues "!" HEEEELLLLPPPP!
I use an external hard drive to store all my music. I sync the hard drive with Itunes because my library is way too big to store on my computer. About every 8 month or so Itunes displays "!" next to all my songs because it can't seem to locate them. When prompted to locate file, it can but this needs to be done one by one. I typically delete my entire library and start over. This is a complete nightmare because I have to build all my files and play list again. Can anyone HELP me out of this frustration??? Thank you in advance!

Does the exHD have a permanent drive letter assigned to it?
Windows can assign different drive letters to digital camera cards, USB sticks, etc if you don't specifically assign them drive letter.
That is a common cause of the !
One day the music is on an exHD named F: and then windows reassigns it to G:

Restored hard drive sync issue

I recently had to have a new hard drive installed on our Mac and we used Time Machine to restore it. Now our devices will not recognize the new hard drive so we cannot get them to sync to our computer even though the data was restored. Any suggestions on getting iTunes and our devices to communicate again? Thanks!!

Sorry for the delays in replying (time zone differences).
Have you tried resetting the device -- for iPhone you press Sleep/wake button and Home button together until Apple logo appears. This will not wipe your data.
If that doesn't work, you can try Recovery mode. Here's a link showing you how (for iPhone).
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
This will erase your data if you go the whole way and you will have to restore from backup, or to factory settings.
For other devices the process is probably similar.
Another thing to try is to reinstall iTunes, but that will import all the preferences and data from your existing iTunes so the problem may persist.

Hard Drive Connection Issue on MacBook Pro

Hi,
A couple weeks ago my MacBook Pro was running and suddenly went into a non-stop pinwheel freeze. After waiting a few minutes I decided to do a manual shut down and when I attempted to reboot it, I just got a blank white screen that wouldn't go away and then a blinking question mark folder when I tried it again. Luckily I already had an external HardDrive Dock so I removed my Hard Drive, used the system startup Disc that came with the computer to redirect the start up disc, and I've been able to boot my MacBook from the Dock since then through a USB cable. So I have a temporary fix, but of course it requires a lot of set up, it's a slower connection, and is less convenient when I take my laptop from place to place.
What I want to do is replace the connection between the Hard Drive and I my MacBook but I want to make sure that I purchase the right part. My MacBook is two or three years old now but it runs fine (besides these issues) and is fast enough for all of my needs. My Macbook is a MacBookPro5,5 with an Intel Core 2. I believe it is a 15 inch model. I'd like to avoid taking this to the Apple Store if possible because I have a limited budget and this should be a pretty simple repair as long as I'm replacing the right part. Can anyone tell me what the probable part is that I need to replace?
Thanks,
Todd

SuperDuper is not compatible with Leopard, but CCC 3.0.x is.
Put the new drive in an enclosure and connect it to the computer. Prep the drive by partitioning and formatting with Disk Utility. Clone your existing system using either the Restore option of Disk Utility or CCC (CCC is a bit faster.) Test the clone to be sure it boots the computer. If all is well then replace the old drive with the new one and put the old drive in the enclosure.
Bear in mind that doing this yourself is not approved by Apple.

Install new hard drive, restore from Time Machine, File Vault Problems

Hello all,
I spent way too much time on this seemingly simple task, so I thought I would share my experience with others so they can avoid some pitfalls when upgrading a hard drive in a system that uses File Vault 2 encryption. The basic goal here is to replace a drive in a system that has only one drive, and the OS is Mavericks, and then have the new drive encrypted as before.
The problem is that a Time Machine restore onto a new drive will leave that without a Recovery Partition, which is required for File Vault 2 and some other important things. So we need to build a recovery partition. There are possibly several ways to do this.
Here's what worked for me (this is compiled from many sources that I found and already closed the tabs in my browser so I can't list all my sources):
1) Make a full backup to an external hard drive using Time Machine.
2) Go into the App Store and download OS X Mavericks but dont install it (close the window when it pops up asking to continue the install). Do this even if you already have Mavericks. At this point, there will be a folder in your Applications folder called Install OS X Mavericks (or similar).
3) Insert a USB drive that is at least 8 GB and format it using Disk Utility, naming it the default "Untitled".
4) Open a terminal and type
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
5) Wait for this to finish (took me about 30 min). Eject the USB drive and power down.
6) Remove the old hard drive and set it aside. Keep it for a few weeks until you know the new drive is working as expected.
7) Install the new hard drive and insert the USB drive. Hold the option key and press the power button. Choose to boot from the USB installer.
8) Use the disk utility to erase whatever partition shipped with the new drive, replacing it with a Mac OS Extended (Journaled) system. Verify that GUID is the partition type (in Advanced options).
9) Close the disk utility and install Mavericks. This can take a long time. My new drive is an SSD, and it sat at the "1 second remaining" part for about 20 min. Let it reboot (maybe it was 2 times?) and go through the setup until it finishes the install.
10) Boot into the freshly installed OS and open a terminal and type:
diskutil list
11) If there is a partition listed as Apple_Boot Recovery HD (mine was 650 MB), then you now have a recovery partition. If not, then go into the App store and download Mavericks, but don't use the USB this time, choose to do a regular install (or reinstall to be more correct).
12) Now there will be a recovery partition on the new drive and Time Machine will not overwrite it when restoring. Power down the system.
13) Plug in the Time Machine backup drive used in step 1. Press the option key and power on. Choose to boot from the recovery partiton (Mavericks).
14) Choose to restore from Time Machine backup. Wait until it finishes and log into the old familiar account.
15) Start a terminal and verify the recovery partition is still there (type diskutil list and see that the Apple_Boot Recovery HD is there). If it's missing, choose to download Mavericks from the App Store again and run the installation from this one.
16) Once there is a Mavericks recovery partition on the restored data you can simply turn on File Vault from the System Preferences Security section. It will require a reboot and then you login and wait for it to finish.
What a major pain to go through all of this for the sake of upgrading a hard drive. This should not be anywhere near as complicated. I hope this helps others avoid the very time consuming trial and error I went through in developing this procedure.

Talked with Apple last night. Everything we did to restore lost images failed to fix the issue. I did have the images still on my camera's SD card so I was not breaking out in a cold sweat.
All Time Machine backups showed the same issue. HOWEVER, I suddenly remembered I also had a SuperDuper backup and voila. The images were there.
Moral of the story: you can't ever be too rich or have too many backups (I also have an offsite backup).

Recovered hard drive restore

The main internal hard drive on my Mac Pro had a mechanical failure and needed to be recovered. I have no time machine backup of the drive. The data recovery service recovered everything on the drive, thankfully. I have purchased a new internal drive and have copied everything from the recovered drive over. The copy of recovered information, despite being 100% intact is not recognized as a possible boot disk.
Is there an efficient way to restore from a hard drive clone without using time machine? Or do I have to manually re-copy everything into a re-install leopard?

It is becoming clear to me that the reasons that your suggestions are not working is because I have actually lost some data. Applications, for example are not all entirely there. It should be no surprise, then that migration assistant and OS installs have not been helpful.
I am left with the manual transfer option, and now I have some specific questions about a manual transfer in order to ensure I do things safely.
1) What are the pieces that I need to transfer to bring the applications over safely? Applications folder and Library folder - or are there others?
2) Can I manually copy the user folder over and expect that it will be present in the startup?
3) Trying to copy over the library folder left me with a permissions error. How to I get around the permissions issue? How do I invoke master admin (root) authority?
Thanks for all of your helpful advice. I appreciate the effort and I am certain this will be the last step.
Lauren

Internal Hard Drive replacement issue?

Hi,
Last night, I upgraded my internal hard drive from 20Gig to 80Gig, and I added a DVD ROM drive so I can watch movies (instead of playing CD's only). I ran the hardware test disc and everything passed.
In addition, last week, I installed 512MB of additional RAM. The physical installations of everything was really a lot easier than people in the forum would have you believe, but Pismos are definitely easier and a lot more user friendly when it comes to upgrading.
The problem is I don't have any iBook installation discs. I DO have the 4 original restore discs, but when I attempt to do a restore, the restore option is grayed out and inaccessible. The eject and switch disc option only shuffle between image and disc. The HD icon won't come up. Startup without the restore discs only boots up to the question mark.
Obviously, I didn't know that I was supposed to back up the original 20Gig drive before removing it. I guess I can put it back in, back it up, and take it out again. My question is, before I remove the 80Gig and reinstall the 20gig, does anyone know of another option to get the restore option to not be grayed out?
If not, then I have another question. How can I back up the original iBook drive on my Pismo's external 300 Gig Firewire Seagate without destroying all the data I've backed up from the Pismo.
It is partitioned into 2, but one of them is only 10Gigs large as a mirror of 1 of my Pismo's 10Gig HD? If it isn't possible, then I guess I can destroy everything on my Seagate and reinstall it again when I'm done upgrading the iBook. I would rather not do that though.
Thank you in advance for any ideas you may have on the subject,
A Little Fish in the BigMac Pond

Check Apple's Knowledge Base article on restoring your Apple software for links to the proper instructions for your model (which depends upon which software came with it). Most likely, the Restore discs are not startup CD's, so you can't use them until OS X is installed on the computer.
You need the installation disc to initialize the drive and format it as Mac OS Extended (Journaled).
I haven't used it, but DiskStudio is supposed to allow you to partition without erasing the hard drive.

Primary hard drive upgrade issues

All this great software has finally taken its toll on the 80Gb of hard drive space that this computer came with (Just for the record, I use the primary drive for the OS and applications only -- I store all of my data on other drives).
So, I need to upgrade the primary hard drive so I can install even more software and do even more amazing things . I'm going to upgrade my primary drive to a 120gb.
I've got Carbon Copy Cloner, but it hasn't solved a couple of issues:
First off, when I make the dupe, it doesn't maintain the original disk's Tech Tool Pro eDrive partition -- I need this on my new drive just in case. Now, you'll say "Why don't you just uninstall Tech Tool Pro and then re-install it when you set up your new drive?" Well, that's because Micromat tracks how many installs you make with any particular activation code, and I'd have to purchase another license to do another install -- and I really don't want to have to lay out $$ when there's really no clear reason.
Secondly, the CCC'd dupe doesn't play well with Classic. (Yeah, I'm a hold-out who still has a couple of OS9 oldies-but-goodies that I won't give up). The CCC'd dupe drive doesn't contain the OS9 drivers that I need to be able to successfully run Classic.
So, my overall question is this -- how do I properly set up my new 120gb drive and then properly transfer a complete image of my old 80gb drive onto it so I maintain all my functionality and all my software applications, but wind up with more space to play?
Thanks!

I solved my own problem! Here's how we did it:
First, we booted up using the Tech Tool Pro disk and removed the eDrive partition from the original boot drive.
Next, we took the new target drive (we went with a 250gb rather than a 120 -- more is always better, no?) and formatted it using Disk Utility from the OSX Panther install disk. This allowed us to put in the OS9 drivers on the disk (didn't find the option for this with Tiger's DU).
Then we used CCC to clone the old drive over. Then I did a little bit of physical re-arranging so that the new drive was in the master spot on the primary IDE chain in the box.
Finally, we booted up again using the TTP disk and had TTP create a new eDrive on the 250gb disk.
After all that, everything works just fine! No problems running apps in Classic, and no need to re-install TTP and spend more money on another license!

Hard drive startup issues after extended sleep/shutdown

Hello,
When I put my iMac to sleep or shut it off for an extended period of time (overnight) and then try to wake it up or turn it on, the iMac makes a strange clicking noise and freezes.
After manually shutting down and restarting it one or more times it will startup fine.
Putting to sleep/shutting down the computer for short periods of time doesn't cause any problems.
So when this first started happening I though "Uh oh, hard drives going to that great recycling depot in the sky."
But, Disk Utility, Apple's hardware test, and TechTool Pro 4 all find nothing wrong with my system.
Is there any chance this could not be an hard drive issue? Or should I just get the drive replaced and stop trying to diagnose the problem?

You've covered the biggies already - I'd recommend a trip to the Apple store or at least a call to AppleCare. Back in the late 80's and early 90's 'stiction' was a serious problem with hard drives. A hard drive motor has very low torque; it can spin fast but it doesn't have much oomph and the lubricant used back then could harden overnight so that when the computer was booted up the drive's motor couldn't spin up the platters. Improvements in lubricants have made stiction less common today but it hasn't been eradicated and it is one of the things that might be affecting your drive. At any rate, since I can't put your computer on my bench, the best call I can make is for you to make a call. Sorry.

External hard drive corruption issues

Hey folks. Really not sure what the best place would be for my question, but I'll try here.
I have a 4 year old LaCie external HD with a 160GB capacity. It stores my iPhoto and iTunes libraries for my iBook, along with a few other bits and pieces.
About a year ago, I noticed some of my files were corrupted and couldn't be played. Whenever I tried to open one of those files, the drive would start knocking and whatever program was trying to access the file would need to be Force Quit. Hoping to solve the issue, I moved the data,(or course, getting stuck on corrupted files along the way) erased and reformatted the drive and moved the data back. Unfortunately, that didn't solve the problem.
I have the data backed up on another, newer external drive, but I'm wondering if there's a way to isolate the bad sectors in the old drive so they can't be written to anymore? Should I use Disk Utility and repair the disk?
I know the drive's old and could fail at any time, but I'd like to keep using it as long as possible. Also, when it does finally fail, could I just purchase another hard drive and place it in the enclosure? I suppose I should also note that the FireWire 400 ports don't work on the enclosure. I'm sure it's not a defect, as I accidentally dropped the drive shortly after I'd purchased it. That fall is probably the cause of the corruptions as well =/
The USB port works fine and I haven't been able to test the FireWire 800.
Thanks for any advice y'all have!
~Lyssa

Your drive sounds very sick. I am not sure how likely it is but I would be concerned about your OS becoming seriously corrupted and possibly unbootable as a result of continuing to use this bad external drive.
It would be better if you could test it connected to a non-critical computer.
Do you know the drive specification? - not the make of the box.
Many drives self-repair and also communicate likely future difficulties to the OS but eventually you come to the end of this process.
I am not sure if disk utilities any longer map out bad sectors. Years ago I used a mounting screw that was too long and damaged the magnetic surface. In those days you could manually map out the bad sectors. I then put partitions each side of the mapped out sectors and continued to use the drive for many years.
More recently I had a drive with an intermittent power connection. However even after repairing this and reformatting the drive was never very reliable.
Good drives are relatively inexpensive. You could try a new drive in your box. I always advise buying server quality drives normally identified by a 5 year guarantee. I prefer Western Digital but Seagate also make reliable drives.

Can't download applications (poss due to hard drive space issue)?

Hi there,
I'm having major hard drive issues with my MacBook Pro OS X 10.4.11 2.4GHz Intel Core 2 Duo 4GB 667 MHz DDR2 SDRAM laptop.
I use it for video editing and also keep music on it. However for the video editing I use an external hard drive, though I've found some Final Cut Pro files on my internal hard drive before and deleted them whenever I've found them. Sometimes it's an Imovie project, sometimes a straightforward final cut project, sometimes a playout of a final cut project.
My problem is that I now have almost no hard drive space, to the point where I wasn't able to save a Word file last week due to insufficient disk space! I emptied the trash and managed to get it to save in the end.
I immediately went on to the discussions pages and it was suggested to try WhatSize, OmniDiskSweeper and Disk Inventory to identify the files that were taking up all the room. Unfortunately NONE of these applications will download onto my laptop. They're not the only ones, I tried downloading a couple of other applications for music and the like and NOTHING will download!
I went through everything that I felt I knew for certain that I could delete without being detrimental and freed up a small bit of room and tried again but still NOTHING. I then used Onyx on the suggestion of another post and freed up a few gigs (I went from 1.7gb available to 7gb available) and assumed that this would do the trick, however, it hasn't!
What happens when I try to download these (or any) applications is that when i click the "Download Now" area on the webpage it begins to move onto what should be a download progress page or a "download complete" page but instead just spends an eternity "loading", with the little loading wheel on the left of the tab just spinning around and around. I tried leaving it literally all night last night but to no avail, opened it back up again and still the circle was spinning around and around "loading". This has been the case for the several dozen attempts I've made, no matter what the website.
It seems like something of a Catch 22 if the situation is that I can't download these applications that will help me to free up Hard Drive space, because I don't have any Hard Drive space! Though I'd have thought that the 7gb I now have would be ample. Did my laptop turn to self preservation mode perhaps when the hard drive was down to the bare minimum and I wasn't even able to save word documents?
If anybody can help it'd be HUGELY appreciated...
All the best,
Rory

If you open a Finder window you can also sort by size by clicking the size column header. In view options you can also set it to calculate all sizes so it will also show folder sizes. Although not as handy as the cataloging applications you can at least start tracking down where the disk space is going. With video you can probably just copy half a dozen files off and immediately free up many GB.
Note that this isn't just a matter of convenience. OSX makes lots of temporary files and is doing it all the time. If it can't find space for those files it can result in a serious drive crash and that could cost you several hundred dollars in recovery expenses. A Sig indicates, you need space just for computer operation. I feel the % recommendation is a bit vague since people use drives ranging from 10 - 1000 GB in size. My computer regularly uses 6GB of hard drive space for temporary files, and I like to leave wriggle room, so I usually leave at least 15-20GB. You can check the temporary file usage by looking at VM in Activity monitor.
As BDaqua observes, having a crowded drive also slows down your computer. If it has to hunt for nooks and crannies in which to place bits and pieces of bigger files that takes time. Normally one does not have to worry so much about fragmentation of files on a Mac, but your scenario of working with large files on a really crowded drive may be defying that generalization.

Internal hard drive replacement issue...(a bit wordy)

I am the second user of this white core duo MacBook - the boss's hand-me-down.
The original hard drive was almost full when I received the unit, so after using it for a while I decided to replace the internal drive. I have an external WD 320GB "My Passport" formatted for Mac use that works just fine - it keeps the Time Machine backups on one partition and a Carbon Copy Cloner image of the original internal drive on another.
I recently bought a WD 250GB Scorpio Blue (WD2500BPVT-00ZEST0), stuck it in the computer, formatted it (Mac OS Extended (Journaled), GUID) as a single partition and put the CCC image of the original drive on it. All was good. New drive booted and functioned as expected. Four days later it failed (question mark appearing on restart attempts). The disk utility applications in four different OS's failed to recognize the disk. Short story is WD sent me a replacement, but 320GB rather than the 250 - a WD3200BPVT-00ZEST0.
I eventually got the new drive partitioned and formatted and installed Snow Leopard from my update disk. All this transpired with the drive docked in an external USB dock.
During the OS install I took the opportunity to set it up in my name rather than my boss's name. (was this a mistake and the source of my problem, I wonder?)
I can boot from this newly built drive when it is docked, BUT NOT when it's installed internally in the laptop. It is recognized as an available start drive during restart, and I get the "apple", but the spinning wheel keeps on spinning without actually booting (or at least I get tired of waiting and the fan keeps spooling up - I eventually just turn the power off).
Is this drive, at 320Gb, too big for this laptop to use internally? (but the 250GB one worked)
Did I make a mistake in creating a different default ID (me rather than the boss) while installing the OS? Is the laptop "remembering" the user setup from the original small drive somehow and refusing to work with the new drive's new user?
This is my first "Mac" experience and I really like the way the OS treats me and the "look and feel" of the GUI, but this has been somewhat frustrating. (I WILL stick with it though, I plan on buying a new MBP next summer.)
Am I forever destined to live with the tiny original drive and be relegated to carrying around Passport drive to get most of my data files?
I now have three drives I can boot from, but I'd really like to have the big new one actually usable from inside the laptop rather than sitting in a dock (with all it's cables).
Thanks for reading this far.
Dave
Message was edited by: Dave Swinnard

Dave Swinnard wrote:
Booted from the SL update disk and ran disk utility to attempt to erase the existing data and repartition - no go. Attempts to erase, change partition size, repartition, verify, or repair all met with an error about being unable to unmount the drive.
OK, so push ahead...
He's dead, Jim.
The hard drive works outside of the laptop.
Your USB enclosure probably runs slower or something.
Has there been some (unknown to me) change in the specifications of 2.5" SATA hard drives since the original one was spec'd for this laptop that renders the newer ones unusable?
I prefer to have other people keep up with this stuff instead of me. I buy pretty much all of my equipment from OWC. If they sell it, it will work with your Mac. Even if you don't buy from OWC (but you should), if you buy the same model numbers that they sell, you should be fine. OWC doesn't sell this drive. For me, that would be a red flag.
(WD claims their "advanced formatting" is OS X compatible without the realignment required by certain versions of Windows, but is it possible this is a hardware related issue with the MacBook?)
OWC does sell the "regular formatting" version of this drive (WDGWD3200BEVT). Perhaps it only works in newer machines. The WD support page also mentioned that cloning can screw up the drive. I never recommend cloning except in some very specific circumstances. I do that not because I know something, but because I don't. I'm not entirely sure what those clone tools are doing underneath and if they've been tested on these new drives.
Maybe put it back into the enclosure and partition it again into a single volume. Make sure to use the GUID option. Don't do anything else with it. Put it back into the Mac and try again. If it fails again, get a different drive.

USB Hard drive, permission issue on one partition

Hi,
I have an issue with my USB hard drive, when I pluged it the 3 partitions are mounted, and 2 of them grant access to the users group:
mount
/dev/sdc6 on /media/usbhd-sdc6 type ext2 (rw,relatime)
/dev/sdc1 on /media/usbhd-sdc1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions)
/dev/sdc5 on /media/usbhd-sdc5 type vfat (rw,relatime,utf8,gid=100,umask=002)
ls -l /media/
drwxrwxr-x 1 root users 4096 Jun 29 22:21 usbhd-sdc1
drwxrwxr-x 18 root users 16384 Dec 31 1969 usbhd-sdc5
drwxr-xr-x 3 root root 4096 Jun 29 22:21 usbhd-sdc6
I read the wiki page about udev, but I can not solve this issue.
PS : HAL is removed from my daemons list.

> You can write on "usb" because the right are : drwxrwxrwx
They appear only when I use 'sudo mount -o rw,noauto,async,user,umask=1000' instead of plain 'sudo mount /dev/sdb1 /mnt/usb2'.
I use vfat for that USB stick, so maybe that's why it works for me. The first two listings in your first post show the drives in different order, but of course the mountpoints show that the offending drive is ext2 not vfat, my bad.
Edit: This is how my ext3 USB stick behaves like:
[karol@black test]$ sudo mount /dev/sdb1 /mnt/usb
[karol@black test]$ mount | grep sdb1
/dev/sdb1 on /mnt/usb type ext3 (rw)
[karol@black test]$ ls -l /mnt
total 8
drwxr-xr-x 2 karol users 4096 07-03 01:08 usb
drwxr-xr-x 2 root root 4096 2009-09-14 usb2
This time /mnt/usb is an ext3. As you can see, there's no root, I (karol) an the owner, so I can rw to my heart's content. Maybe you should change the ownership - 'chown' (man chown if you're not familiar w/ that command).
Last edited by karol (2010-07-02 23:05:52)

Hard drive restore- issue

Similar Messages

Maybe you are looking for