Hard Drive size seems to include Files on time capsule

I recently used Whatsize to measure my hard drive space. I was surprised to see it includes some files i have copied to my time capsule as a backup. This measurement is the same with the about this mac hard drive measurement. Is it usual for these files to be included?

Yes, it should be OK to delete the folder - even if it contains some stuff that never got to the real Time Capsule, they should just be backup files for what should still be on the source drive. Just for added safety, though, don't empty the Trash for a while, until you know that the Time Capsule is functioning properly and you again have two copes of all your stuff.
There may be an additional issue accessing the Time Capsule after you do delete that folder. I'm not familiar with network drives, but in the case of local drives the presence of a ghost folder can cause the real external drive to mount on a path containing an extra number in the volume name. In other words, now, with wi-fi back on, the current paths in the file system might be:
/Volumes/timecapsule/ - the ghost folder
/Vollumes/timecapsule 1/ - the real Time Capsule
when you delete the ghost folder and restart, the Time Capsule will now be able to mount "normally",
/Volumes/timecapsule
It's possible, though, that Time Machine and Deja Vue will still be looking for their backup targets at /Volumes/timecapsule 1/, a path which no longer exists, and will thus be unable to find the files on their previous backups. You could probably check for this in Time Machine just by entering it. If this does happen, I think you could probably recover just by re-choosing the target disk in Time Machine and in Deja Vu, but I don't really know the inner workings of Time Machine.
Again, this may not be an issue at all, but it's something to be aware of.

Similar Messages

How to plug a hard drive on the USB port of a Time Capsule. TC in bridge mode

Hello
I would like to connect a hard drive onto the USB port of a Time Capsule. This is for saving files (different frome the Time Machine savings). I am struggling to get it working it seems that I can see the HD when under "drives or discs" (running Snow Leopard in French) from the AirPort Utility but I can't access to it.
The TC is in bridge mode.
Thanks for help and guidances.
Best
Pierre

The question is clear enough.. I just don't understand why you are having issues.
Can you see in the internal disk of the TC in the finder?
What format are you using on this disk? Try and format it HFS+ if it isn't already.
If you plug it directly into the Mac it works ok??
The other issue is the need for a powered hub on the TC due to the low power it gives the internal port.. or lack of bios compatibility with a range of usb hub chips. Try a powered hub as that can also help.

Whats the best way to transfer everything from my old macbook pro to a new mac mini, i have a external hard drive which i backup to regularly via time capsule

whats the best way to transfer everything from my old macbook pro to a new mac mini, i have a external hard drive which i backup to regularly via time capsule

Check out > OS X Lion: How to use Migration Assistant to transfer files from another Mac

After having my hard drive replaced, I tried restoring files from time machine. The restore completed but I don't know where the files were restored to. I can see they are taking up space on my hard drive but I can't get at them.

My hard drive failed and so was replaced, luckily everything was backed up on time machine.
I tried to do a full restore, and it went through the process but I couldn't see my files anywhere on the HD. I tried again and same thing. Eventually I used Migration Assistant and this worked fine.
However my hard drive is now full - all my previous restores went somewhere but I can't get at them.
Can anyone please help, I need to delete them from my system.
Thanks

Is the HDD in the 2009 15" MBP dead? (The original source of your data) If not, you might want ot take it out and put it in an enclosure.
You might try spotlight on know files to see if that gives you any clues where your data is located.
You might down load from the Internet OmniDiskSweeper (free) and open it. It should show you all of the files you have on your MBP and enable to locate them.
Ciao.

How to connect a hard drive on the usb port of my time capsule?

Hello,
I have a 1T iomega HD and would like to connect it to my TIME Capsule to either mak a back up of it or to expand the capacity of my TimeCapsule.
thanks
Ric

You now have two drives that can be used for Time Machine backups, or other storage needs.
You need to understand though that Time Machine will not simply continue backups to the USB connected drive once the Time Capsule is full. You will have to start over with a new "master" backup on the USB drive and then proceed with incremental backups again.
If you plan to copy the contents of the Time Capsule to the USB drive, that is a separate type of backup called an "Archive". I am not clear if you want to do this or not.
Are you able to "see" both the Time Capsule drive and the USB connected drive in the Finder, or do you need some tips on that?

Playing media files from Time Capsule hard drive

Hello folks,
I am using my 3TB Time Capsule to host all of my video files, most of which are MKV files. I also have an external hard drive connected to the USB port on Time Capsule and there are few video files on it as well.
I am using Time Capsule as a router sitting between the cable modem (WAN) and my locan network (LAN). I have an Argosy HV355T digital media player hooked up to my home theater and TV via HDMI. It is connected to Time Capsule via Ethernet.
On Argosy media player, I am able to connect to Time Capsule (login is successful) but I can neither see the hard drives nor their contents.
When I connect the external hard drive to the USB port on Argosy, the hard drive is recognized and files from it can be read and played. Thus I have ruled out the possibility of Argosy being unable to read Mac formats.
I try to use uPnP on Argosy to connect as uPnP client to Time Capsule, but nothing happens. I thought uPnP is turned ON by default on Time Capsule.
Why am I not able to see the Time Capsule hard drive from my media player?
What am I missing in my setup?
Do I need to install a media server device to read files from hard drives and storage, and stream to media player (Argosy)?
How are you folks using Time Capsule to play video from its hard drive on to TV?
Thanks.

I try to use uPnP on Argosy to connect as uPnP client to Time Capsule, but nothing happens. I thought uPnP is turned ON by default on Time Capsule.
Why am I not able to see the Time Capsule hard drive from my media player?
What am I missing in my setup?
Do I need to install a media server device to read files from hard drives and storage, and stream to media player (Argosy)?
How are you folks using Time Capsule to play video from its hard drive on to TV?
The TC has no upnp.. no Apple device does.. Apple refused to join and went off in a huff, sat in the corner and created their own.. NAT-PMP.. which as you can imagine.. doesn't work with anything else but Apple stuff.
So first issue.. no upnp but that isn't a biggie.
SMB file protocol which the rest of the world uses.. has rules which Apple also breaks.
Make sure your TC is setup with all short names. no spaces and pure alphanumeric.
On the file sharing page of the airport utility.. (you may need to use 5.6 from Mac or Windows), ensure that you set a workgroup.. generally now WORKGROUP. And make sure you turn on the guest account to full read and write permissions.
It would be good to ensure a normal windows computer can access the TC..
In windows explorer type in the address bar
\\TCname or \\TCIPaddress (where you replace with actual name or IP).
I do not know the Argosy player but I will look it up.
My hacked ATV1 can see and play files from the TC. That is running XMBC of course.

I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?

I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?
Thanks!
David

Either of these should help.
http://grandperspectiv.sourceforge.net/
http://www.whatsizemac.com/
Or search 'disk size' in the App Store.
Be carefull with what you delete & have a backup BEFORE you start, you may also want to reboot to try to free any memory that may have been written to disk.

I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file ext

I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. so I can reburn the films on a single BluRay disc. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file extensions on the VOB files to MPEG but this was no help. Some of the VOB files contain numerous film clips but my software does not appear to be able to recognize them as such. I need to know if replacing my old Premier Elements with the new Version 13 would solve this problem or not. Any advice would be greatly appreciated!
Bob

Bob
What do you have now.....
What computer operating system do you have?
We can go into the finer points of source and your intentions, but for now it would appear that you are using SD 4:3 source media to get to a HD 16:9 result. Lots to discuss in this regard.
What was given to you on the DVD disc? DVD-VIDEO 4:3 or something else?
If DVD-VIDEO on DVD disc, you should expect to find on the disc a folder named VIDEO_TS. That is your target for your video files.
If you were given a DVD-VIDEO on DVD disc, then all you want from it are the video files, specifically
VTS_01_1.VOB, VTS_01_2.VOB, and so on through that series until possibly getting to
VTS_02_1.VOB, and so on. How many files you have beyond the VTS_01_1.VOB file will depend on the size of the DVD-VIDEO.
Does the above scenario apply to you?
The alternative might be someone giving a DVD disc (data disc) which contains just the VTS files mentioned which were copied from
the VIDEO_TS Folder. So, you do not get the whole VIDEO_TS Folder, just the essential video files. Does this scenario apply to you.
I see no need to replace your Premiere Elements 4 with a later version unless you have a huge project and need a later version that will be a 64 bit application running specifically on Windows 7, 8, or 8.1 64 bit computer.
Consider...Premiere Elements 4 and if you have DVD-VIDEO on DVD....
1. Place the DVD disc in the burner tray
2. Open Premiere Elements 4 and set the project preset for NTSC DV Standard (assuming you are working in a NTSC setup)
3. Go to
Get Media
"DVD, Digital Camera, Mobile Phone, Hard Drive Camcorder, Card Reader"
"Adobe Premiere Elements - Media Downloader" and its Advanced dialog.
Set the Source in the latter dialog for the drive which has your DVD disc inserted in its tray
You should see your VTS_01_1.VOB thumbnail in the "Adobe Premiere Elements - Media Downloader" Advanced dialog.
With this VOB selected, click on Get Media to get the file from there into the project.
Should work fine.
Complications may be involved if the people who processed your footage gave you something other what is described above.
Please review and consider, and then we can plan our project strategy accordingly.
Thank you.
ATR

O.S. / Hard Drive Size for NIO Server/Client's load testing...

Hi All
I am currently load testing a NIO Server/Client's to see what would be the maximum number of connections that could reached, using the following PC: P4, 3GHz, 1GB RAM, Windows XP, SP2, 110 GB Hard Drive.
However, I would like to test the Server/Client performance on different OS's:
Which would be the best possible option from the following:
1. Partition my current drive, (using e.g. Partition Magic), to e.g.
- Win XP: 90 GB
- Win Server 2000: 10 GB
- Linux: 5 GB
- Shared/Data: 5 GB
2. Install a separate Hard drive with the different hard drives
3. Use a disk caddie, to swap in/out test hard drives.
4. Any thing else?
- Would the Operating System's hard drive size affect the Server/Client's performance, e.g. affecting the number of connections, number of File Handles, the virtual memory, etc.?
Many Thanks,
Matt

You can use a partition on the same HDD or use a second HDD, disk caddie well if its a direct IDE or SCSI. If its usb no it will be too slow, may be if you have a fire-wire but I still don't recommend it.
Be careful if you don't have any experience installing Linux you may do multiple partitions on you disk without knowing, because Linux ext partitions are not visible to windows.
Recommended disk size for fedora is 10 GB. This is the amount of data that will be created on you HDD when you do a full installation.

Max hard drive size in G5

Hello,
Like the G4's before it(not including MDD), do the G5 Quads have a limit on hard drive size? I was wondering what the max size for a hard drive is for the G5 Quad, or can one go up to 4 terabytes?

Remember, I was mostly on a G4 MDD and have some experience with a G5. Now that I have a G5 Quad, I am learning stuff each day.
Research, Read, and Educate yourself.
If anything, I would have hoped that that was understood from my posts.
Remember, I only have a Sawtooth, but I know about all PPC Macs........
http://manuals.info.apple.com/en/PowerMac_G5_Late2005.pdf
Someone with your post count should at least be aware of "Search Discussions" features.
They should also be aware of the forum rules and etiquette.
But, this next question you can help me with. I am looking for a replacement graphics card which will provide more performance than the stock PCIe Nvidia 6600. Can you provide help for me with that?
http://discussions.apple.com/thread.jspa?threadID=1677926&tstart=0

Is there a Hard Drive Size Limitation when using Tiger?

Im going to be setting up a backup server that users can copy their working files to, so Im going to be installing 2 300gb hard drives on a G4 running tiger. I just want to be sure that there is not some hard drive size limitation with tiger.
Please let me know!!!

Welcome to Apple Discussions!
The size limitation is operating system independent. It has to do with the ATA bus on older machines which is discussed in more detail on this article:
http://docs.info.apple.com/article.html?artnum=86178
If you have a G4 tower that is older than the resolving of that limitation, you can add a PCI ATA card which supports larger hard drives, many of which are discussed in more detail on http://www.xlr8yourmac.com/
I'm not sure about sharing external hard drives, though the size limitation does not apply to new external hard drives purchased since that limitation was resolved with newer ATA buses.

New computer hard drive size short?

I just received my new iMac 20inch with a 500GB hard drive. But when I went through the set-up process, I noticed that the hard drive size was only 449GB. Is this normal? I have not added any software to the computer outside of what it came with and was wondering if what was included with the computer actually took up 51GB of hard drive space.
iMac A1207 Mac OS X (10.4)

Hello and Welcome to Apple Discussions.
This is normal. Hard disks are mis-leadingly sold in decimal notation but data is recorded in binary form (it's in the small print though). My 320Gb drive is 297.9Gb, my 2Gb Nano is 1.86Gb. The approximate conversion calculation goes:
(500 x 10003) / 10243 = 465.66.
Right click on Macintosh HD and choose Get Info and check the Available, Used and Capacity values.
The remaining 15Gb or so is taken by OS X and pre-installed software like iDVD, Garageband and MS Office trial etc.
BTW you have posted in the iMac (Flat Panel) forum. The users here will be less familiar with the specific issues that Intel Macs may suffer. I'd advise that you post future queries in the iMac Intel forum:
G4 (aka Flat Panel): Intel:
Click image to go to correct forum
regards
mrtotes

Since i upgraded to mavericks,my external hard drive lost half of the files ,how can i get them back?

Since i upgraded to mavericks,my external hard drive lost half of the files ,how can i get them back?

Type move itunes library into the google serach bar.
It has always been very basic to always maintain abackup copy of your computer. Do you not have a backup copy?

If you delete a large file from the mac hard drive does it also remove it from time machine on external hard drive

if you delete a large file from the mac hard drive does it also delete it from time machine on the external hard drive ?

As the others say, no, the backup copy won't be deleted immediately, but it will eventually.
If you want to delete all backups of a selected item, such as for space or security reasons, see #12 in Time Machine - Frequently Asked Questions.

I have a new hard drive on my imac I want to sync my ipad(which has the files I lost when my old hard drive died), which holds the files I lost when my old hard drive died. How can I sync my ipad with my new hard drive?

My hard drive on my IMac died, so I have a new hard drive. I want to sync my Ipad(which has the files I lost when my old hard drive died) back with my IMac. How can I sync my Ipad with my new IMac hard drive without erasing my legacy files on the Ipad at the same time?

Copy everything from your backup copy of your cpomputer to your new hard drive.

Hard Drive size seems to include Files on time capsule

Similar Messages

Maybe you are looking for