Harman kardon Aura Wifi with Spotify connect seems not working?

Hello all,
i Just bought a Harman Kardon Aura, It is connected to my home network, so is my phone! and i did make sure My speaker is on wifi connect mode.
But i can't find my speaker on spotify connect
and i did check my wifi setting, i can see my speaker and my phone are both connected on the wifi network.
Someone can help me with this problem? thanks

Please share the fix with us. I am no longer able to use remote since upgrading to iTunes 8

Similar Messages

Bug (?) with Corporate Connectivity is (not) Working check

Noticed something odd. In situations where:
Direct Access client is offsite
their Internet access is via WiFi
they first have to enter their access credentials through a web-based captive portal before access is granted
then the Corporate Connectivity Check process malfunctions. Have seen cases where, after accessing the captive portal and being authenticated, Internet access works on the client. Direct Access then connects successfully. This is confirmed
on the server console, showing the client connected and the user credentials used. The client is able to access internal resources just fine (e.g. network drives on file servers).
But on the client itself, it still says Corporate Connectivity is Not Working. The WiFi icon is showing an exclamation mark. My belief is that this is caused by the client's inability to access Microsoft NCSI servers in a timely fashion.
So it looks like the corporate connectivity checks are dependent on Microsoft NCSI checks.
Can someone at Microsoft please look into this, as it is confusing our users (not to mention us guys in IT who have only just discovered this odd behaviour!).

Hi Steven !
Thanks a lot for your guidance !
After I followed the steps, I found that the time out occurs when trying to resolve the internal domain name.
The Windows Firewall was enabled on all profiles ( active on the public )
There were no IPsec sessions established in the Security associations tab, so I enabled the audit policy of the IPsec as per your instructions.
There is reoccurring error in the Security log :
Date:          10/8/2014 10:08:49 AM
Event ID:      4653
Task Category: IPsec Main Mode
Level:         Information
Keywords:      Audit Failure
User:          N/A
Computer:      MyW8Client
Description:
An IPsec main mode negotiation failed.
Local Endpoint:
Local Principal Name: -
Network Address: MyW8Client_Ipv6 address
Keying Module Port: 500
Remote Endpoint:
Principal Name:  -
Network Address: MY_DA_Servert Ipv6 address
Keying Module Port: 500
Additional Information:
Keying Module Name: AuthIP
Authentication Method: Unknown authentication
Role:   Initiator
Impersonation State: Not enabled
Main Mode Filter ID: 180987
Failure Information:
Failure Point:  Local computer
Failure Reason:  Negotiation timed out
State:   Sent first (SA) payload
Initiator Cookie:  9e636863e513b367
Responder Cookie: 0000000000000000
As far as I understand - the connection can not be established due to certificate error, which in my case is strange since my DA configuration is set to not use computer certificates, only Kerberos.
I will keep digging but any additional tip/advice will be appreciated!
Thanks again, Steven!
P.S. Just noticed that the Event ID 4653 produce two types of "Failure Reason" - apart from "Negotiation timed out" I also get "No policy configured"

Report with JDBC connection does not work when they includes CommandTable

I am trying to render using the new version of Crystal report java component - CRJ a report contains Data base Fileds of type Command Table (Row Set) which seems to be not working.
when i use the previes version of crystal SDK it works fine.
after deugging the Sample CrystalHelper.java file which contains the method .changeDatasource()
i found that the DataBaseController.setLocation() method changes the CommandTable class to Table when using it on CommandTable instance and as result all the fields defined into that CommandTable were disappear.

That appears to be a known issue: Eclipse JRC: To change the JDBC connection at run time
Sincerely,
Ted Ueda

HT204387 Hi I have a iphone4, and I bought harman/kardon bluetooth speakers, the iphone connects with the speakers but after about a munite or 2 the connection just stops.

Hi, I have a iphone4, and bought a pair of Harman/kardon bluetooth speakers, the iphone connects with the speakers but after about a munite or 2 the connection stops.
Can you please advise me on the subject
Regards
Izak

This previous discussion discusses the same if not similar problem.
https://discussions.apple.com/message/6750990#6750990

Control volume from Android to Android with Spotify Connect

Spotify Connect is great! Since some days ago we can control the Desktop App from our mobile phone or tablet, including volume control. What's still missing is volume control from Android to Android.
In this thread it is stated that this function already works, but I have several Android devices at home, and on none of these devices does volume control with Spotify Connect work. More people have this problem, see this thread. It does work from Android to PC, which is already great.
I've contacted Spotify Support, and they confirmed that volume control from mobile to mobile doesn't work at the moment.
So, the idea is:
Please implement volume control with Spotify Connect from Android to Android!

I've been waiting for the volume control feature for a long time now. It is already supported by the Windows Desktop App. Why not on Android devices? I am using an Android TV box with the Spotify App as Spotify connect client. A great tool, but would be perfect with remote volume control. michel123 wrote:
Spotify Connect is great! Since some days ago we can control the Desktop App from our mobile phone or tablet, including volume control. What's still missing is volume control from Android to Android. In this thread it is stated that this function already works, but I have several Android devices at home, and on none of these devices does volume control with Spotify Connect work. More people have this problem, see this thread. It does work from Android to PC, which is already great. I've contacted Spotify Support, and they confirmed that volume control from mobile to mobile doesn't work at the moment. So, the idea is:Please implement volume control with Spotify Connect from Android to Android!

I have an iphone 4S with broken wifi (!) and I need to sync my contacts before I set up my new iphone 6. I thought contacts synced automatically with itunes but seems not. I've found my Apple address book but contacts are outdated. What to do? Help!

I have an iphone 4S with broken wif i :-( and I need to sync my contacts before I set up my new iphone 6. I thought contacts synced automatically with itunes but seems not. I've found my Apple address book but contacts are outdated. What to do? Help!

If your Bluetooth is working, you may be able to tether your phone to another device, and backup that way. Either via iCloud or one of many Apps that send yourself a VCF file containing your contacts.
You may have to update to a later IOS via USB and iTunes, not sure if IOS 6 has Bluetooth Tethering.
I would have thought you could also switch off cloud sync'ing for your contacts, this should ask a question if you want to keep the contacts on your phone. An iTunes Backup and then Restore to your new iPhone should restore the local contacts. Then sync these back to the iCloud.
Hope this helps.

TS3899 Our CEO has an iPhone and an iPad. Everytime he is at a specific airport (BWI) he is unable to send or recieve email over 4G or wifi. Everything else seems to work just fine over wifi or 4G LTE. Has anyone ever seen anything similar? is this malwar

Our CEO has an iPhone and an iPad. Everytime he is at the Baltimore Washington Airport (BWI) he is unable to send or recieve email over 4G or wifi. Everything else seems to work just fine over wifi or 4G LTE. Has anyone ever seen anything similar? is this malware?
Both devices are on Verizons 4G LTE network. Both devices do have some of the same APPS installed. Can this be a case of him connecting to a rogue wifi network of a hacker that may have installed malicious code on his devices when he connected? That would explain why only his devices have the same exact issue only at BWI airport.

Something similar I've experienced. I was once having to use a AT&T hotspot and the iPad simply refused to access my mail via the mail app. But if I used safari I could get it. So the internet was working, but my supposition is that something with the hotspot's firewall messes with mail exchange.
next time your boss is at BWI, do you guys have a web interface? (for example if I wanted to access my work mail I could get them to set it up via the mail app and exchange, or I could go to a certain web address and access my mail that way via safari)
He could try using safari and the web interface if you have it.
If it's something in the hotspot's firewall I doubt it's anything that can be changed.

Please post if you have WiFi with WPA2-PSK and WEP working on iPod ios4

Quite a few people seem to be having difficulty with getting WiFi with WPA2-PSK and WEP working on iPod ios4. I'd like to know if anyone does have this working. Please let us know iPod model, access point (router) model, and security settings on your setup. I'm reluctant to upgrade if I can't get WiFi because quite a few of my favorite apps need the net. Please do NOT post to this thread if your WiFi is NOT working. Thanks
I have:
1. brand new (not yet even initialized) 32GB iPod Touch
2. iPod Touch 8GB 3rd Gen
3. Netcomm gateway/router/access point with security set as noted above.
Edit: if you don't know what Gen your iPod Touch is, please see:
http://support.apple.com/specs/#ipodtouch
The easiest way to tell 2nd from 3rd gen is that 3rd gen has bluetooth (look in Settings/General -- if Bluetooth is there, your iPod is 3rd gen, if not it's 2nd gen or earler).
Message was edited by: KumbiaKid

Thanks a lot to all who responded. I now have registered and upgraded my brand spanking new 32GB iPod Touch to ios4. Before I updated, I registered the new iPod, set up and checked the WiFi connection as described in my OP (except that it was AES - not WEP as noted above) and it worked just fine. I then updated to ios4 and it still worked fine, with no further input from me. It just connected as it should have after the update and all internet functions connect and work as expected.
To those who have had problems, my sympathy, but the problems are clearly not due only to ios4 -- there has to be something else going on with your connections.
Message was edited by: KumbiaKid

My itunes on a windows 7 pc with dsl connection will not connect with the itunes store

my itunes on a windows 7 pc with dsl connection will not connect with the itunes store. Any suggestions about why not or how to get it to connect?

After reading the whole post, I still don't capture the exact error message or code from it when you failed to install Office 2013.
The only clue is that "bootstrap loader error" ...
It seems that you want to upgrade Office 2007 to new Office 2013, by default, we could complete the uninstall previous Office version and install the new Office in the installation wizard.
At this point, if you get the install source through CD or other media. I recommand that we copy/paste the installation to local drive. Then turn off all of anti-virus and firewall, begin to setup in
Windows clean boot mode.
Please use a setup log to troubleshoot setup problems in Office if the installation problem still occurs.
http://support.microsoft.com/kb/826511/en-us
Tony Chen
TechNet Community Support

Automatic update of RemoteApp and Desktop Connections does not work (while manual updates with "update now" is working)

Hello,
on several Windows 7 Clients the update/refresh of the RemoteApp and Desktop Connections stopped not working automatically. There is a Update failed error. When we do an "Update Now" manually, it gets synchronized without problems.
I am asking me if there is an issue with a stored Password as we Need to Change the Passwords regularily. The error is occuring for Connections to all RDS Servers (we have severals).
Does Windows store the user Password in the Task Scheduler? If yes, does the schedule Task Password Change automatically after the Domain Password Change?
Or what else could be the issue? The RDS Server and the certificate (Name the same as the URL) seems to be fine as not all Clients have this issue.
Thank you for your help

Hi,
Thank you for posting in Windows Server Forum.
By default it will automatically update the RemoteApp and Desktop Connections but if in any particular case it’s not happening then for a try you can restart the server and check the result again. In addition you can try running below command and check
the result.
Start-Process rundll32 -ArgumentList "tsworkspace,TaskUpdateWorkspaces2
More information:
Powershell to update "RemoteApp and Desktop Connections"
If a task is registered using the Administrators group for the security context of the task, then you must also make sure the Run with highest privileges check box is checked if you want to run the task. Please check “Task
Security Context” for more details.
Hope it helps!
Thanks,
Dharmesh

HP Pavilion Entertainment PC: WiFi works, however, hard wired connection does not work.

Internet via WiFi works, however, hard wired connection does not work.
My software indicates my hardware is working properly.
However, if I connect another computer to the cable I am using, it connects to the internet without a problem.
And, if I connect my comupter to another cable that works with another computer, my computer still does not connect to the internet.
HP Pavilion dv9700 Notebook PC
32-bit Operating System
Windows Vista Home Premium Service Pack 2

It could be that the touch pad is broken on the inside and the contact area for the one button is either broken, blocked with an object or the cable going to the mother board is not inserted correctly into the mother board connector. I think in any case the case will have to come off and someone look for physical/connection problems. It doesn't sound like a software problem but there is always a chance.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

Connecting Wahoo Blue HR with iPhone 5 does not work, tried everything possible

Connecting Wahoo Blue HR with iPhone 5 does not work, tried everything what I could find in the interenet as solution??????

IPhone 4s, iOS 7.1.1: iphone can't connect to wahoo HR BT4.0 sensor :((( Wverything worked fine with iOS 6 !!!

Why does my camera connection kit not work with my ipad 1 after updating on ios 5?

Why does my camera connection kit not work with my ipad 1 after updating on ios 5? What can I do to make it work again?

It should. It will only respond if there's something on the card for it to respond to, so do you have pics on the card?
And if it's messing up; try giving the iPad a restart. Hold down the sleep and home keys, past when you see hte red power down slider and until you see the silver apple. Let it reboot and try again. That can clear up any glitches on the device itself.

What if sync with new computer does not work. logical connection to old with WindowsXP, 32 bit version of iTunes. New is Windows7 with 64bit version

What if sync with new computer does not work?
logical connection to old with WindowsXP, 32 bit version of iTunes.
New is Windows7 with 64bit version

Syncing to a new iTunes library or computer will erase your iPod. Only if you back up your iPod manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
Do this:
Disable autosync in iTunes, connect your iPod to your new computer and right click on it in the device list and choose backup. iTunes will backup your iPod without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the iPod for the first time.
Music is one way only, from the computer to your device, unless you bought the songs in iTunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
About backups and what's saved: http://support.apple.com/kb/HT4946
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
Saving other data is also described here. How to back up your data and set up as a new device
If your iPod can't be recognized by Windows, try these tips: iOS: Device not recognized in iTunes for Windows

I can't read acsm files on my e-reader after transferring them from the pc with ADE. it seems to work, but then when I try to open the files on the e-reader it says "open failure". what's wrong?

I can't read acsm files on my e-reader after transferring them from the pc with ADE. it seems to work, but then when I try to open the files on the e-reader it says "open failure". what's wrong?

The acsm file is not the book, it is a ticket to get the book. I sometimes get library books online, here is what I do.
1. Start ADE on the computer
2. Go to library website and find the book I want to download.
3. Click on the download link
4. In windows 7 a box opens asking whether I want to open( or run) or save the acsm file
5. Click open/run and ADE downloads the book into the "Library"
6. Transfer the book (epub file) to the reader.

Harman kardon Aura Wifi with Spotify connect seems not working?

Similar Messages

Maybe you are looking for