Harware and software for the FMS and FME
Hello!
For our universities broadcaststudio, we are planning to
install a FMS system for HD/SD live input.
Could you pls. give me some advice, if this system could
work, before we are going to buy the components?
Thanks in advance!!
OS Windows Server 2008 Standard, QuadCore Intel about
2,33GHz, 2GB RAM
Video CaptureCard Osprey 700HD
FlashMedia Encoder 2.5
FlashMediaStreaming Server
Is it possible to use the CaptureCard, Encoder 2.5 and FMS on
one Computer?
Thank you for your help!
Yes its possible to have your capture card, Encoder 2.5 and
FMS on same computer. But, you may not be able to stream Higher
sizes since the CPU utilization should not be beyond 75% for smooth
streaming of videos.
Similar Messages
-
I have an old iPhone 3Gs with software version 4.3.5, I am trying to use it again, and it works fine, but I have not been able to update the software. Every time I try, I get the following message:
"there was a problem downloading the software for the iPhone, the network connection could not be established". This happens even though I have a working internet connection.
Besides that, all the other functions work properly, even synchronize apps and library.
Will I be able to update the software?look around the forum tons of people repport that they can't update
makes you suspect that apples update servers can't meet the depand of too many users
trying to update at once -
I tried to update to the latest software for the iPhone 4 today, May 16th. After removing the software, I received an error message from iTunes and now my phone has no software and useless for everything including a phone call. I immediately went to Restore it to my last saved version and 4 hours later, I still have "iTunes is restoring the software on this iPhone. I am frustrated beyond belief as this happend twice when I had a 3G. Does anyone know how long it should take for a Restore on an iPhone 4 16 gb? Or if there is a fix for this? I'm about to throw away the phone and give up on iPhones forever. Thanks for any help you can give.
Hi NWL1,
Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario -
When trying to download and update the operating system software for my iPad and iPod I get the following message - "ERROR MESSAGE" There was a problem downloading the software for the iPad "Mikki's iPad". The network connection timed out. Make sure your network settings are correct and your network connection is active, or try again. later." Is this a setting on my computer - my network is working fine. I didn't have any trouble before but have just started having trouble. Please help...
Hi Robertfrom Denver.
Did you try the solution given, and if yes, did it work?
I have done several "attempted downloads, and see the full file download, typically taking 30 minutes to complete, and then something goes wrong.
I am happy to suspend AV and FW software, but would like to know if it is a good fix or not first?
HelenfromBroughton Astley -
I downloaded the 64 bit version of itunes and plugged in my ipod touch but a sign pops up and says i need the right software for the ipod to connect which is 64 bit. Does anyone know how to fix this problem?
Hi alexanderfrommilton,
First try reinstalling itunes. -
I just got an iPod shuffle yesterday and I have downloaded the latest update for iTunes (10.7) and when I plugin it in it says that I have not got the correct software for the iPod
What is the exact error message you are receiving? Have you checked to make sure the connections on each end of the USB cable are nice and snug?
B-rock -
With the new software for the I phone it appears 12 000 mails without reading and I can't find the solution, With the new software for the I phone it appears 12 000 mails without reading and I can't find the solution
Actually your suggestions are the ones that i have tried. i have seen that you have tried to help others with this issue and the only one that i could find that said they found the problem said that it was an ilife update issue and it fixed it and i have no available updates. i know it has to do with something in photo stream because it happens when i create a new library and it is loading the photos but i get the message before i reach the maximum 1000 photos. so i've tried updating, new library(first backing up photos and then deleting them from iPhoto), reinstalling OSX many times, running disc utilities. I called Apple the first day i had this issue and i was the first person to call them for support with the retina display and i actually had it escalated to a senior advisor and we thought we fixed the problem but we did not. i am pretty fluent in dealing with troubleshooting these type of issues and this is the first time i'm reaching out to the community. i figured now that the retina has been out some time now that there would be an obvious answer to this issue. thanks for the quick reply.
Bebers5 -
Does anybody know any software for the Mac that I can run round robin, single and double elimination tournaments? I help run tournaments but using excel for pool play and the web for bracket play, but if wifi is not available I have no way of running brackets for prize play. Can some one help point me in the direction of software that I can use locally on my Mac Pro.
Thanks,
Chris
<E-mail Edited by Host>Splendid City Team Sports Scheduler, and Sports Scheduling Software System
-
im getting the error message: there was a problem downloading the software for the update Iphone. The network connection timed out. I have been trying to update for 2 days now.
Disable your firewall and antivirus while you download.
-
I am trying to download ios7 onto my iphone 4s through itunes and keep getting the message "the software for the iphone was corrupted during download. Disconnect and reconnect then try again. Make sure your network settings are correct and network connection is active or try again later."
Try force quitting the app...
Hold the On/Off Sleep/Wake button down for a few seconds until a red slider appears, then press and hold the Home button until the app quits. -
I can't update my iPad. The message says, the software for the iPad was corrupted during download. Err=1403
What did iTunes Support say when you contacted them ? If it's been more than 48 hours since you contacted them and you haven't had a reply then contact them again.
If you haven't yet contacted them, then to do so :
- go to http://www.apple.com/support/itunes/ww
- click on your country's flag
- click on the Contact Support at the bottom of the left-hand column
- click on Contact iTunes Store Support on the right-hand side of the page
- then Purchases, Billing & Redemption -
I am trying to update my iPod touch & keep getting this error message: There was a problem downloading the software for the iPod. The network connection timed out. Make sure your network settings are correct and your network connection is active. Help!
Temporarily disable or turn off your Firewall and Anti-Virus software and try the download again.
-
I have been trying to update my iPhone 4 with iOS 5 for about 30 minutes and I keep getting the same thing. It says,"There was a problem downloading the software for the iPhone. The network connection could not be established." What do I need to do to solve this problem?
iOS: Resolving update and restore alert messages
For error -50: See error 13 and 14:
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network. -
I am trying to download software for the clear internet network. It is telling me that I am running in a 64 bit mode and
need to be in a 32 bit mode to run their software....can I and how do I change it to a 32 bit mode?Wow that was really quick, thank you so much. Im not sure at all which version it was because i said it was around 4 years ago he bought it. I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names. isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
sarucia -
ipad is not restored.. it almost done loading and.it.say There was problem downloading the software for the ipad. the network connection was reset.. i turn off the firewall and antivirus.. It was almost donnIe like 5% away to be finish...
Error -3259 is a network timeout error, usually. This article might help:
http://support.apple.com/kb/TS2799
Maybe you are looking for
-
Hi Experts.. We currently installed SAP in the Cleint PC. Upon log in, the system was nos able to open SAP. Error message is " [Miscrosoft SQL NAtive Client] Unable to lcomplete og in due to delay in opening server connection. Can someone help me wh
-
[P43 Neo-F] No Pci-e Frequency option in BIOS??
Hi.. I am using a MSI P43 Neo F Board(MS-7519). Now I am facing the FSB Wall problem of this board and the only solution I have found is to increase Pci-e frequency to 104 as suggested by the main topic about this problem on this forum. But the probl
-
Help Please!!! I get the following error message when attempting to download files.
I get this message each time I try to download a file. my system tells me that Adobe Reader is up to date. What should I do? Please wait... If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be
-
Hi, Installed coherence, even the new 3.7.1.6 full distribution. but when it started, it raised an exception about socket: bash-3.2# ./coherence.sh ./coherence.sh[11]: pushd: not found. ./coherence.sh[15]: popd: not found. ** Starting storage disable
-
One of lines by Sravya Talnki reads as /people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii We design a ccBPM if we need to do the stateful message processing that is you need to manipulate the