Has ANYONE managed to get OS2 working with WiFi and bridge?

I've scoured the forum, and tried everything - right now, its a cute, flat paperweight.

I have!
If you are having the same problems as me, on update, I had no wifi connections at all - didn't find a single one, despite the area being overrun with wifi networks.
Connect your paperweight, I mean, Playbook, to the Desktop Software, take a backup, then do a security swipe and reset the whole thing.
With mine, as soon as it came back on after the swipe the wifi was working correctly.
I re-connected it to the Desktop Software, accepted any updates it was offering, then restored my backup from this morning.
Hey presto! A fully functioning Playbook!
Good luck!

Similar Messages

Has anyone managed to get Authorization working with JAAS from CusLoginMod?

Hi everybody,
I am on a standalone oc4j 10.1.3.1.0
I want to be able to access a private resource using form based authentication
and I would like to use JAAS from with a custom login module.
The authentication part works just fine but the authorization doesn't seem to happen.
Both login() and commit() from my LoginModule are called and after authentication takes place, the subject is populated with the right Principals, in my case "testers".
This Subject then it should be matched against the <security-role> defined in my application's web.xml
This is the part from my application's web.xml which holds the security information.
<security-role>
<description>Online User</description>
<role-name>testers</role-name>
</security-role>
<security-constraint>
<web-resource-collection>
<web-resource-name>access to the private application</web-resource-name>
<url-pattern>/faces/user/*</url-pattern>
</web-resource-collection>

<auth-constraint>
<role-name>testers</role-name>
</auth-constraint>
<user-data-constraint>
<transport-guarantee>NONE</transport-guarantee>
</user-data-constraint>
</security-constraint>
<login-config>
<auth-method>FORM</auth-method>
<form-login-config>
<form-login-page>protected.htm</form-login-page>
<form-error-page>error.jspx</form-error-page>
</form-login-config>
</login-config>
Has anyone faced this scenario before?
Any advices much appreciated
thank you.

I can't see what am I missing if I'm missing something.
This is my orion-application.xml
<orion-application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/oracleas/schema/orion-application-10_0.xsd">
<jazn provider="XML" jaas-mode="doAsPrivileged" location="">
<property name="role.mapping.dynamic" value="true"></property>
<property name="custom.loginmodule.provider" value="true"></property>
</jazn>
<jazn-loginconfig>
<application>
<name>JAAS</name>
<login-modules>
<login-module>
<class>jaas.JAASLoginModule</class>

<control-flag>required</control-flag>
<options>
<option>
<name>debug</name>
<value>true</value>
</option>
<option>
<name>log_level</name>
<value>ALL</value>
</option>
</options>
</login-module>
</login-modules>
</application>
</jazn-loginconfig>
</orion-application>

Has anyone managed to get a PS3 Controller to work with OSX Lion?

Hi,
I wanted to connect my PS3 controller to my iMac (late 2011) using bluetooth but have been unable to do so. It will connect for a brief time but then it will lose connect as it has not paired. It also asks me for a pairing code. I have tried 0000 and this does not work. I have searched the internet and it seems this is a common issue. Has anyone managed to get it working?
Does anyone know if Apple plan to fix the issue with a forthcomming update?
Cheers,
Tim

There are numerous threads on this, please use the "More Like this" tool, you will find it on the right. I'm not sure if anyone has any solutions but that is the logical place to start.

Has anyone managed to install aperture 2 with a 12" G4 laptop?

Mine runs Leopard 10.5.2 with a 1.5 Ghz processor and 1.25GB of memory. The system checker says it's fine but it tells me my graphics card will not work it properly. My graphics card is the GeForce FX Go5200.
Has anyone managed to get it installed, it's blinkin annoying that i cannot load it on this laptop?

I've got it running now on my 12" 1.25 PB with 768Mb of RAM, it took some fiddling but it is running now. On launch it tells me 'The version of ImageIO installed on your computer is not supported by Aperture' but still gives me the option to continue and from there it launches as normal.
It appears that my Nikon D3 files are not supported but earlier cameras like my D200 are fine. My PB is running 10.4.11 btw.
I'm not sure I'm allowed to explain how I got it running here, I've no wish to contravene any forum rules but you can contact me at flateric1 AT mac.com and I can give you my iChat name to talk you through it if you wish.
FlatE

Has anyone managed to get HP Warranty Information into SCCM?

Has anyone managed to get HP Warranty Information into SCCM?
I have tried a few scripts that I found on the net but none of them seem to work as I believe HP updated there site this year..

OK, I played around a bit (scripting from a web page isn't way beyond me) but... a few caveats. My lab isn't available right now; so all I could test was that the script ran on an HP laptop. A single HP laptop. and created the regkeys in
(in my case) HKLM\software\wow6432node\CompanyName\WarrantyInformation. So... one single test on one single workstation, and no testing of the mof edit means... I'll need your help to confirm it works.
Anyway, below is the script. Other caveats: It drops a log, and then continuously adds to the log file in %temp% (of the SYSTEM, which is using %windir%\temp). So depending upon what you want/need--you may want to change the EnableLogging
= True to EnableLogging = False (once you confirm it works on all/most of your boxes). The other caveat, of course, is to change the sCompanyname = to be your Company Name; although I suggest you don't have spaces or special characters in it. Short
'n' sweet. Then, naturally, once you have a box with the regkeys, use Mark Cochrane's RegKeytoMof 3.0 or higher to build the mof edits for you to paste to the bottom of your configuration.mof and sms_def.mof. In that blog above Eric Schloss was
using DCM as the delivery method to deliver the script to populate the regkeys--that worked for him and I see no reason it wouldn't work for everyone--so once you've tested the script interactively from a psexec -s -i cmd.exe shell on an hp box (to see it
create the regkeys) I'd make a DCM like Eric did and target a collection with a few HP laptops or desktops and confirm it works via the DCM.
Anyway, give this a try--again... only tested on 1 single, lonely little HP laptop. Needs a bigger test base!
Edit: and... even using Regkeytomof sometimes regkeys can be tricky. If the mof edit doesn't work right to pull the data back, post what you've added. someone here can usually spot if there's something not right about it and help you fix
the mof edit.
Edit #2: removed bad space, and bad copy/paste job as discovered by sevengs. Thanks!
on error resume next
EnableLogging = True
sCompanyName = "CompanyName"
Set oShell = CreateObject("wscript.Shell")
Set fso = CreateObject("scripting.filesystemobject")
strTemp = oshell.ExpandEnvironmentStrings("%temp%")
If EnableLogging Then
Set oLogFile = fso.OpenTextFile(strTemp & "\WarrantyInfo.log", 8, True)
oLogFile.WriteLine "*********************************************************"
End If
WriteLog "Beginning warranty information lookup."
sWebServiceHost = "http://h20000.www2.hp.com/bizsupport/TechSupport"
sWebServiceURL = "WarrantyResults.jsp"
sWebService = sWebServiceHost & "/" & sWebServiceURL
'Get the system's serial number from WMI
Set oWMIService = GetObject("winmgmts:\\.\root\cimv2")
Set colItems = oWMIService.ExecQuery("Select SerialNumber from Win32_BIOS",,48)
For Each objItem in colItems
sSerialNumber = objItem.SerialNumber
Next
WriteLog "Serial number of system is " & sSerialNumber
'Get the Product ID from WMI
Const wbemFlagReturnImmediately = 16
Const wbemFlagForwardOnly = 32
lFlags = wbemFlagReturnImmediately + wbemFlagForwardOnly
strService = "winmgmts:{impersonationlevel=impersonate}//./root/HP/InstrumentedBIOS"
strQuery = "select * from HP_BIOSSetting"
Set objWMIService = GetObject(strService)
Set colItems = objWMIService.ExecQuery(strQuery,,lFlags)
sProductNumber = ""
For Each objItem In colItems
If objItem.Name = "SKU Number" Then
sProductNumber = objItem.Value
End If
If objItem.Name = "Product Number" Then
sProductNumber = objItem.Value
End If
Next
If Len(sProductNumber) = 0 Then
WriteLog "ERROR: Product Number could not be determined."
oLogFile.WriteLine "*********************************************************"
oLogFile.Close
WScript.Quit(9)
Else
WriteLog "Product number of the system is " & sProductNumber
End If
Set colItems = oWMIService.ExecQuery("Select AddressWidth from Win32_Processor",,48)
For Each objItem in colItems
sAddressWidth = objItem.AddressWidth
Next
WriteLog "Operating system is " & sAddressWidth & " bit."
'Define the parameters string to send to the web site
sParameters = "nickname=&sn=" & sSerialNumber & "&country=US&lang=en&cc=us&pn=" & sProductNumber & "&find=Display+Warranty+Information+%C2%BB&"
WriteLog "Opening the web site URL " & sWebService & "?" & sParameters
'Define and call the web site
Set oHTTP = CreateObject("Microsoft.xmlhttp")
oHTTP.open "GET", sWebService & "?" & sParameters, False
'oHTTP.setRequestHeader "Content-Type", "application/x-www-form-urlencoded"
oHTTP.send
If oHTTP.Status = 200 Then
WriteLog "Successful response from the web site."
'WriteLog oHTTP.ResponseText
Process oHTTP.ResponseText
Else
WriteLog "ERROR: the web site returned status code " & oHTTP.Status
WriteLog "Returning exit code 1."
nExitCode = 1
End If
If EnableLogging Then
oLogFile.WriteLine "*********************************************************"
oLogFile.Close
End If
WScript.Quit (nExitCode)
Function Process (HTML)
WriteLog "Processing the HTML returned from the site."
intSummaryPos = InStr(LCase(html), "serial number")
If intSummaryPos = 0 Then
Process = ""
Exit Function
End If
intSummaryTable1Start = InStrRev(LCase(html), "<table", intSummaryPos)
intSummaryTable1End = InStr(intSummaryPos, LCase(html), "</table>") + 8
intSummaryTable2Start = InStr(intSummaryTable1End, LCase(html), "<table")
intSummaryTable2End = InStr(intSummaryTable2Start, LCase(html), "</table>")
table1 = getStr(intSummaryTable1Start, intSummaryTable1End, html)
table2 = getStr(intSummaryTable2Start, intSummaryTable2End, html)
const HKLM = &H80000002
Set oReg=GetObject("winmgmts:{impersonationLevel=impersonate}!\\.\root\default:StdRegProv")
sKeyPath = "SOFTWARE\" & sCompanyName & "\WarrantyInformation"
WriteLog "Registry key path is HKLM\" & sKeyPath
oReg.CreateKey HKLM,sKeyPath
WriteLog "Processing the first table from the web page."
arrGeneral = processTables(table1,1)
'arrGeneal should be in the form Serial Number, Product Number, Product Line, Product Description, Warranty Check Date
WriteLog "Processing the second table from the web page."
arrContracts = processTables(table2,2)
'arrContracts should be in the format Warranty Type, HW Warrenty Start Date, HW Warranty End Date, HW Warranty Status, Setup Warranty Start Date, Setup Warranty End Date, Setup Warranty Status
WriteLog "Setting registry values."
WriteLog "SerialNumber is " & arrGeneral(0)
oReg.SetStringValue HKLM, sKeyPath, "SerialNumber", arrGeneral(0)
WriteLog "ProductNumber is " & arrGeneral(1)
oReg.SetStringValue HKLM, sKeyPath, "ProductNumber", arrGeneral(1)
WriteLog "SerialLine is " & arrGeneral(2)
oReg.SetStringValue HKLM, sKeyPath, "ProductLine", arrGeneral(2)
WriteLog "SerialDescription is " & arrGeneral(3)
oReg.SetStringValue HKLM, sKeyPath, "ProductDescription", arrGeneral(3)
WriteLog "WarrantyCheckDate is " & CStr(CDate(arrGeneral(4)))
oReg.SetStringValue HKLM, sKeyPath, "WarrantyCheckDate", CStr(CDate(arrGeneral(4)))
WriteLog "WarrantyType is " & arrContracts(0)
oReg.SetStringValue HKLM, sKeyPath, "WarrantyType", arrContracts(0)
WriteLog arrContracts(1)
WriteLog "HardwareWarrantyStartDate is " & CStr(CDate(arrContracts(1)))
oReg.SetStringValue HKLM, sKeyPath, "HardwareWarrantyStartDate", CStr(CDate(arrContracts(1)))
WriteLog "HardwareWarrantyEndDate is " & CStr(CDate(arrContracts(2)))
oReg.SetStringValue HKLM, sKeyPath, "HardwareWarrantyEndDate", CStr(CDate(arrContracts(2)))
End Function
Function getStr(startpos, endpos, data)
Dim tmp
'Get the substring
tmp = Mid(data, startpos, endpos - startpos)
' Remove end of line
tmp = Replace(Replace(Replace(tmp, VbCrLf, ""), vbCr, ""), vbLf, "")
getStr = tmp
End Function
Function processTables(table, ttype)
' Remove HTML Tags and replace with "|"
Set re = New RegExp
re.Pattern = "<[^>]+>"
re.IgnoreCase = True
re.Global = True
table = re.Replace(table, "|")
table = Replace(table, " ", "")
table = Replace(table, ":", "")
table = Replace(table, " ", "")
' Remove excess |
re.Pattern = "[|]+"
table = re.Replace(table, "|")
' Clean up a bit more
re.Pattern = "\|\s+\|"
table = re.Replace(table, "|")
' Remove | from start and end of string
re.Pattern = "^\||\|$"
table = re.Replace(table, "")
arrTable = Split(table, "|")
arrTmp = ""
If ttype = 1 Then ' General Info Table
i = 1
For Each cell in arrTable
Select Case LCase(Trim(cell))
Case "serial number"
sSerialNumber = arrTable(i)
Case "product number"
sProductNumber = arrTable(i)
Case "product line"
sProductLine = arrTable(i)
Case "product description"
sProductDescription = arrTable(i)
Case "date of warranty check"
sCheckDate = arrTable(i)
End Select
i = i + 1
Next
arrTmp = sSerialNumber & "|" & sProductNumber & "|" & sProductLine & "|" & sProductDescription & "|" & sCheckDate
ElseIf ttype = 2 Then ' Contract Info
i = 0
For Each cell in arrTable
cell = Replace(cell," ","")
if Instr(lcase(trim(cell)),"wty hp hw maintenance onsite support") > 0 then
cell = "wty hp hw maintenance onsite support"
end if
if Instr(lcase(trim(cell)),"wty hp hw maintenance offsite support") > 0 then
cell = "wty hp hw maintenance offsite support"
end if
if Instr(lcase(trim(cell)),"wty hp support for initial setup") > 0 then
cell = "wty hp support for initial setup"
end if
Select Case LCase(Trim(cell))
Case "warranty type"
sWarrantyType = arrTable(i+8)
Case "wty hp hw maintenance onsite support"
sHWStartDate = arrTable(i+1)
sHWEndDate = arrTable(i+2)
sHWStatus = arrTable(i+3)
Case "wty hp hw maintenance offsite support"
sHWStartDate = arrTable(i+1)
sHWEndDate = arrTable(i+2)
sHWStatus = arrTable(i+3)
Case "wty hp support for initial setup"
sISStartDate = arrTable(i+1)
sISEndDate = arrTable(i+2)
sISStatus = arrTable(i+3)
case else
End Select
i = i + 1
Next
arrTmp = sWarrantyType & "|" & sHWStartDate & "|" & sHWEndDate & "|" & sHWStatus & "|" & sISStartDate & "|" & sISEndDate & "|" & sISStatus
End If
' Remove | from start and end of string
re.Pattern = "^\||\|$"
arrTmp = re.Replace(arrTmp, "")
'wscript.echo arrTmp
arrResult = Split(arrTmp, "|")
Set re = Nothing
processTables = arrResult
End Function
Function WriteLog (sText)
If EnableLogging Then
oLogfile.WriteLine Now() & " " & sText
End If
End Function
Standardize. Simplify. Automate.

Has anyone managed to get a 3TB dynamic disk on Windows 2003 Server?

I just got a pair of new 3TB disks that I wanted to put on my Windows 2003 server enterprise x64 system, SP2, all updates installed.
When I first tried to convert to dynamic, I got the error "The operation did not complete" as described in this KB article
http://support.microsoft.com/kb/826823
It says there is a patch, but there is not one for x64, just x86 and ia64
I found another technet discussion here: https://social.technet.microsoft.com/Forums/en-US/winserverfiles/thread/cb62238c-b3d0-4989-b45a-ae6de6701a7b?stoAI=10
However its best suggestion is to use a product from AOMIE, but I tried that and it didn't even recognize the disk. It also suggests that one needs a better version of diskpart.exe and to try to the 32 bit version. Anyone have any experience
with that?
I also tried creating moving the disk to Windows 7 x64, making it dynamic there, but when I move the disk back to 2K3 it does not recognize it, and goes back to a 2TB partition. I also saw something about needing a 512 block size for 2K3, but W7 does
not allow anything smaller than 1K.

Hi,
During my research, if found the following artcle which also mentioned a 3TB disk should be supported in Windows 2003 SP1:
Has anyone managed to get a 3TB dynamic disk on Windows 2003 Server?
http://social.technet.microsoft.com/Forums/en-US/winserverfiles/thread/a720ae72-0c04-44dd-94c0-2e6aecce530e
So I contact the author about this issue. He said it could be caused if your hard disk is a 512e drive as the 3TB drives on the market today are normally 512e drives.
However manufacturers stopping identifying this, and if the controller is old, FSUtil will not able to identify a 512 drive but recognized it as a normal 512n drive.
Thus please provide the drive model so we could search on manufacturer's website for exact information.
Also please paste the screenshot in your reply which Satish mentioned if available.
In addition, here is an article Robert provided:
http://www.windowsitpro.com/article/what-would-microsoft-support-do/support-advanced-format-hard-drives-141584

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
TIA,
Jerry

Thanks, Martin.
Good to hear someone has had success. The lack of it here is frustrating and depressing.
Thanks again,
Jerry

Can I get an Ipad with wifi and cellular but no contract with a carrier in the US? I want to use it overseas in Africa with a local SIM card and use the cellular signal for all my internet.

Can I get an Ipad with wifi and cellular but no contract with a carrier in the US? I want to use it overseas in Africa with a local SIM card and use the cellular signal for all my internet.

Yes you can. All Ipad's are unlocked and can be used any where in the world. Buy the AT&T version which is GSM in other countries

Has anyone got the B500 to work with Ubuntu? (nvidia driver problems)

In two weeks, I have been completely unable to get the nvidia driver working with the B500 on Linux. No matter what I try to do, the X server doesn't start, and my /var/log/Xorg.0.log file ends with "fatal server error: no screens found." I have tried feeding a custom modeline to xorg.conf, explicitly calling an EDID file which I extracted from the Windows installation, using the upstream nvidia driver installer, using the official repository driver, and probably a bunch of other stuff that I'm not recalling right now.
Versions I've tried this on:
Kubuntu 10.04, 32- and 64-bit
Ubuntu 10.04, 32-bit
Kubuntu 9.10, 32-and 64-bit
I am stumped. Has anyone successfully gotten this to work?
best,
-p.
Solved!
Go to Solution.

Solved with the kind assistance of paulricardomc on the Ubuntu Forums: http://ubuntuforums.org/showthread.php?t=1477507
Short version of the fix:
1. Extract the edid from the Windows partition using softMCCS, saving as edid.bin
2. Save the edid.bin file in /etc/X11 (or wherever you like)
3. Include the following in the device section of your xorg.conf:
"Option" "ConnectedMonitor" "DFP-0"
"Option" "CustomEDID" "DFP-0:/etc/X11/edid.bin"
Fire up X and you're good to go.

Has anyone managed to get Hotmail to work with Mail?

Hotmail aka Windows Live Mail.
Has anyone got Mail 3 in Leopard to work with Win Live/Hotmail?
If so, I would love to hear about how you did so, as I would like to use Mail to check e-mail. =)
Thanks.

How to Access Windows Live Hotmail with Mac OS X Mail - About Email
http://email.about.com/cs/macosxmailtips/qt/et042503.htm

Has anyone managed to get icloud to synchronise properly with outlook calendar?

I have an iphone 5 and am running outlook 2010 on windows 7 32 bit.
I can get icloud to do the intial upoload of the calendar but then after that it won't synchronise new calendar entries.
The phone and icloud syc, but icloud won't sync with outlook whether the entry is put in outlook or in icloud.
I have spoken with Apple support and over many weeks have de-installed and re-installed icloud several times.
I have sent various diagnostiocs and screen shots.
The icloud outlook addin does not appear in the outlook add-ins section, although I can see what might be the add-in sitting on the c drive in the apple folder.
Support have also told me that there is no way to download the icloud add-in seperately.
Apple support are now telling me that I need to de-install and re-install outlook to try and get the add-in to install correctly.
That would be a real pain and I can see on this forum that other people have already tried that without success.
They also say that if that doesn't work I will need to completely re-install the OS.
I don't think they know what the problem is and are just trying anything that might work.
I really don't want to lose all my business data from outlook and certainly don't want to trash my whole PC.
Has anyone any idea where the problem might be?
Many thanks

Do I gather by the lack of answers that nobody has?

Has anyone managed to get play count/last played to sync?

I can live with the podcasts being borked, it's prompted me to use an app (hello iCatcher!) which I had been planning to do for a while. I'm still learning its ways, but it feels a lot more comfortable already.
The thing that I absolutely cannot understand is how ratings, playcount and last played times are not synchronising. I've a number of smart playlists based on these attributes and I haven't been able to get them to sync up since I enabled Match on my iPhone.
So I've got an iPhone which I sync with iTunes on a Mac. Everything's patched up to the latest version.
Has anyone successfully had any successful syncs? The smart playlists are just a joke - I'd expect the track listings to be comparable between devices, but they just aren't.
This is a beta product which some glaring functionality holes. How Apple can think it's worth paying for is beyond me. The smart playlist functionality has been working seamlessly for years on iTunes ... but it's broken. And I paid for the product that broke it. I'm feeling very let down.

I haven't managed to get any playcount, ratings etc to sync. There are so many issues with this version of iTunes Match I cannot believe Apple released it.
The order of tracks in playlists doesn't match iTunes on my Mac, selecting a folder of playlists in iTunes on my iPhone hangs the phone and sometimes crashes it, metadata doesn't sync, some albums are split into 2, etc.
Looking forward to an update soon.

Has anyone got Time Machine to work with Time Capsule?

I've been trying for days to do an initial backup without success. Everything seems to be working fine and then it just stops and says the backup has "failed." The last one went 24 hours and backed up about 90 GB before it just stopped. Then it has to start over, from the beginning. (This thing is so slow you'd think somebody was writing the files out in longhand!) I even moved my iMac into the room with the Time Capsule, which is actually pretty annoying, in case it was a case of a dropped signal.

Hi,
I've spent hours and hours trying to get the harddisk to work properly. Set-up was easy-peasy and the Airport works great for the internet. However, when trying to use time-machine and the hard disk it was a nightmare !!! Each attempt at the back-up failed after about 4 gig with a 'unable to mount volume' error. If I re-tried, it failed. Following some of the tips on the forums, I deleted the back-up file created by time machine on the hard drive and the initial back-up started successfully but failed after about 4 gig again (I had 96 gig to back-up). There are various fixes flying around - ensure you have a name for your computer - should be short and no spaces or funny characters. Same goes for your name of the timecapsule. Some people are saying you should use an ethernet cable for your first back-up but that should not matter at all. I took mine back to the apple store in the end - a mac genius downloaded all the latest patches (only came out 19th march) for the time-capsule firmware, time machine software and airport express. Still didn't work, so conclusion was the time-capsule was knackered !!! SO MY RECOMMENDATION IS TO GET APPLE TO REPLACE IT BUT MAKE SURE YOU TRY THE ABOVE FIRST.
New time-capsule was attached to my imac, started up great first time. My initial back-up ran through perfectly first time through wireless - it took 15 hours but I did have 96 gig to back-up. time machine sees this no problem so it looks like everything is fine.
Good luck !!

Has anyone managed to install RAID 0 with 975x PowerUp ?

Out of curiosity, has anyone on here managed to install XP on RAID 0, using 2 SATAII drives ?
I've had problems (another post) ... but I was just curious if anyone has managed to do it.
If so, can you confirm ...
a) what slots in the mobo you put your SATA drives in (there is that single 'special' SATA connector!)
b) what driver did you use for the F6 method.
I just want to see if anyone has managed to do what I have utterly failed to do ...
Thanks,
S.S.

Quote from: SpencerSteel on 18-September-06, 01:49:59
Out of curiosity, has anyone on here managed to install XP on RAID 0, using 2 SATAII drives ?
I've had problems (another post) ... but I was just curious if anyone has managed to do it.
If so, can you confirm ...
a) what slots in the mobo you put your SATA drives in (there is that single 'special' SATA connector!)
b) what driver did you use for the F6 method.
I just want to see if anyone has managed to do what I have utterly failed to do ...
Thanks,
S.S.
Are you still having problems installing windows on RAID? PrvtMsg me if you want some help.
Incidentally you should be using two of the five main SATA ports, enabling RAID in the SATA section (forget the JMicron - disable it)
Next you should be able to enter the Intel RAID config Mgr WHILST the system is POSTing, and set up your RAID volume from there.
This should enable you to use the Intel RAID drivers on a floppy disk.
Quote from: smokinkane on 18-September-06, 22:31:04
I have 2 seagate 7200.10 (perpendicular recording) drives in RAID 0 on the intel controller, no problems at all. This config rips, its unreal, I'm sure it gives all of raptors except the new version a serious headache, haha.
Really? what sort of benchmarks are you getting? I use HDTach for HDD Benching.

Has anyone got BT broadband talk working with a 3r...

I would like some assistance if possible? i use an AVM Fritz Box 7270 and subscribe to BT broadband with calls. I currently dont use the BB talk as i have never got it working. Is it possible? how on earth do i get it working?
An idiots guide to getting this working would be preferable!!
Many thanks..

Guides are here:
http://www.jarviser.co.uk/jarviser/repeaterhubphone.html
Hope this helps(?)

Has ANYONE managed to get OS2 working with WiFi and bridge?

Similar Messages

Maybe you are looking for