Has anyone uploaded Waves Silver to use with GB'09? I'm stuck...

So, I've uploaded the waves driver (thang....) and I've got my iLock, and account. I'm in my iLock account, my key is in the USB port, I've gone to 'Download Licenses'. It's telling me: 'no iLock detected'.
Also, when I open GB, it wants a 'response' for Waves.....
I'm so stuck, I can't even tell you........

It all depends on your individual needs. Are you doing graphic design or are you a photographer. If the latter are you mainly shooting compressed Jpegs or large raw files?
I personally find the i5 processor offers really good value for money especially when compared with the very expensive (over priced?) i7. I’m now on my third Dell machine which I really like (running i5 +1Tb storage and 6gb RAM with Nvidia graphics card) and PSE8 and Lightroom run like a breeze.
The best advice is to identify your present and immediate future needs and shop around.
 

Similar Messages

  • Has anyone figured a way to use the Magic Trackpad with Windows 7 on a partitioned disc using Bootcamp?

    Has anyone figured a way to use the magic trackpad with Windows 7 on a partitioned disc using Bootcamp?

    Yes. After Windows/Bootcamp discovers  your bluetooth device (Magic Trackpad or Mouse, be sure to make it discoverable), right click, with your wired mouse, of course, on the icon and select Properties.
    Then check the mouse drivers box and your device should work. (I located this solution on another thread)
    It works for both the Magic Mouse and Magic Trackpad.
    Must admit, the solution was not intuitive within the Windows environment. But we all must remember. It IS Windows, after all.
    Another thing. Keep in mind that the gestures on these devices that work just dandy in OSX do not carry over into Windows.
    It's Windows.

  • Has anyone found a way to use the Epson Print Utility with an Airport?

    I have an Epson Photo 2200 connected to the USB port of my Time Capsule. Everything has been working great until recently. Now I cannot use Epson Printer Utility unless I connect the printer directly to my Mac via the USB port. It does not find the printer. Connected directly, Epson Print Utility2 works properly. Epson Print Utility3 does not find the printer, even when connected directly. Reading the various discussion threads, I am not alone and the problem is with many, if not all of the Epson printers. The Utility worked fine at one time but appears to have quit working over the network probably around OS upgrade 10.5.2. In addition, you must use the Gutenprint driver when installing the printer. Epson's gives an error.
    Has anyone found a way to use the Epson Print Utility with an Airport print server with OS 10.5.2 or later?

    Before receiving this reply, I had other problems with the Gutenprint driver. I'm not sure what I did but after playing around for about a day, the Epson driver finally worked while connected through the USB port. The printer then worked with the Airport. The print utility still doesn't work without being directly connected. (It used to work while connected to the Airport. Until recently, I never connected the printer directly to a computer.)

  • Has anyone been able to successfully use more than 8 cores with Logic?

    I've posted this before and was recommended to phrase the question like this, has anyone been able to successfully use more than 8 cores with Logic?
    If so or if not please specify what version of logic you have, what computer since only the new Mac Pro's have 16 virtual cores, and any other information or reference saying how to or how its not possible. This seems to be a question many users need to find out before upgrading to a new mac. Thanks!

    DrumStudio wrote:
    I've posted this before and was recommended to phrase the question like this, has anyone been able to successfully use more than 8 cores with Logic?
    If so or if not please specify what version of logic you have, what computer since only the new Mac Pro's have 16 virtual cores, and any other information or reference saying how to or how its not possible. This seems to be a question many users need to find out before upgrading to a new mac. Thanks!
    No,
    But I've been able to record a quartet using only 4 musicians.

  • What problems, if any, has anyone had by changing to iCloud with their iWeb pages?

    What problems, if any, has anyone had by changing to iCloud with their iWeb pages?

    The iWeb Application will still run after Mobile Me will be turned off; you can export your web pages to a folder on your hard disk and use ftp to upload the pages to another hosting service.
    The generated webpages however will refer to icons located on the mobile me server. To make the forward/backward arrows in slide shows work again you will have to patch the iWeb Application. See Old Toad's tutorial on how to do this:
    Modify the iWeb Application: http://oldtoadstutorials.net/No.26.html
    Also there is a nice tutorial on how to transit from Mobile Me to another service; see Roger Wilmut's page here:
    Migrating from Mobile Me:
    http://www.wilmut.webspace.virginmedia.com/notes/migrate/frommobileme3.html
    Regards
    Léonie

  • Has anyone tried to download anything using linux?

    Has anyone tried to download anything using linux? I can't seem to get anywhere with this site or the Ottawa Library Site.

    Well, if your husband managed to ade 1.8 running with wine, I'll gladly take any hint on how he did that. I get get ADE to start.

  • Has anyone tried M-Audio ProjectMix IO with Logic?

    Has anyone tried M-Audio ProjectMix IO with Logic?
    I know M-Audio's drivers have had issues, but it looks interesting.

    The Fishman Triple Play is simply the best hardware option to date for triggering external MIDI whether hardware sound modules or software instruments.
    Having used many MIDI guitar converters since '89, I can say that the FTP tracking is very accurate and velocity dynamics are reasonably wide from soft to loud.
    The Triple Play app works in Stand Alone mode in OSX 10.7.5 but not in 10.8.3.
    In 10.8.3, you load the Fishman Triple Play plug-into into the I/O of a software instrument track.  Open the app and adjust sensitivity, mono vs poly, transposition down or up an  octave, etc.  Save your set ups as presets which can be scrolled through with the D-Pad control on the converter.
    While the GR-55 is an amazing all-in-one solution in a small, light weight package (in relation to the bulk and weight of several actual guitars, basses, amps, fx, etc), it is a poor choice for triggering external sound sources.  Whereas I can play "bass" lines on the open E and A strings with my now obsolete Roland GI-20 and RMC piezo equipped guitar without any sense of latency, the GR-55 latency was simply intolerable.  Of course one could revert to the old strategy of playing parts an octave higher on the fret board to increase speed and accuracy of tracking. But what about playing "piano" with  fretted triads against the open E or A strings???
    Think I'm full of hot air?  Skim through this: http://www.joness.com/gr300/MIDI_SPEED.htm
    I traded my GR-55 towards a JTV-59. 
    Once set up, you're gonna love the FTP.  As I mostly sequence MIDI in Logic, being wireless is incredibly convenient.
    Message was edited by: CC#11

  • After ios 8 update I can no longer play music through my car. I have a 2012 Nissan Rogue - whihc has its own cable made to use with iPhone 4 - I use a apple adapter to converst to use with 5.

    After ios 8 update I can no longer play music through my car. I have a 2012 Nissan Rogue - which has its own cable made to use with iPhone 4 - I use a apple adapter to converst to use with 5. Has been working fine up until update. Is there a fix for this? The car does not have usb

    Here I come to save the daaaaaaaaaay!!!
    Had the same issue with my Nissan Rogue 2011.
    This listed below will fix it...
    Go to General > Restrictions > CarPlay -- Make sure Carplay is DISABLED. (The new IOS 8 enables this on default)
    Go to General > Reset > Reset Network Settings
    The Nissan Rogue radio system was never designed to work with CarPlay. By default, CarPlay feature comes enabled when you install IOS 8. Suckz, right?
    You're very welcome! Have a great day!
    Sincerely,
    The Superhero

  • Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?

    Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
    I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
    TIA,
    Jerry

    Thanks, Martin.
    Good to hear someone has had success. The lack of it here is frustrating and depressing.
    Thanks again,
    Jerry

  • Has anyone successfully tethered a Nikon D7000 with Aperture 3.1?

    Hi,
    I have a new Nikon D7000 and tried to tether it to Aperture 3.1. Aperture recognizes it as a D7000, but I can't get an image to display. I'm outputting JPEG right now and can wait until RAW is available, but it would be convenient to tether so I can get immediate feedback on the image while I'm shooting.
    Has anyone had success tethering the D7000 with Aperture 3 or is the software not there yet? I'm talking about having the image immediately downloaded to the iMac and automatically displayed after you take each photo, not downloading at the end of the day.
    Thanks

    UPdate - the key was opening a new project in Aperture 3. Once I did that, Aperture recognized the D7000 and I could shoot from the camera and have it displayed immediately on the iMac.
    It works right out of the box. Yea!!!
    Message was edited by: luckyphoto2010

  • Has anyone had a opf parse error with container.xml missing, when it is actually present plz ?

    Has anyone had a opf parse error with container.xml missing, when it is actually present plz ?

    Has anyone had a opf parse error with container.xml missing, when it is actually present plz ?

  • Has anyone lost the info from games with the new iOS7? My games reset to level zero! Argh!

    Has anyone lost the info from games with the new iOS7? My games reset to level zero! Argh!

    Restore from your iTune Backup.

  • Can anyone recommend powered speakers to use with Airtunes ?

    Can anyone recommend powered speakers to use with Airtunes ? I live in Toronto and I cant seem to find any too easily.
    Thanks

    John Galt wrote:
    Apple used to sell the Apple Hi-Fi which I thought complimented the Express nicely.
    They're both white -- I'll give you that.
    What I was thinking of more when I said similar in design was the way that the AirPort Express simply hangs on a wall, no desk or shelf shape required, with the bare minimum of cables. By the same token, I'd like to have a small amp and/or speakers that could hang/be mounted on the wall and deliver music into the room via AirTunes -- without an octopus of cables and without having to dedicate an entire tabletop to it (audio should be heard and not seen.)
    Well, that would be great, but there are way too many variations of audio equipment for people with all kinds of tastes to make for a worthwhile market. Whereas I might think it's silly to have more than a 100W stereo amp others would consider that pathetic.
    If Apple could pack a 100W+ amp into something that hangs off a power outlet, more power to them. I was thinking more along the lines of 5-10W, or just enough to power some wall mounted speakers. That said, [these speakers|http://store.apple.com/us/product/TU902VC/A?fnode=MTY1NDA1NA&mco=Mjc4M jI1MQ] look somewhat promising. It looks like they could be powered off the USB on the AEX, so at least no power brick. Unfortunately, they don't look geared to wall mounting, and who knows what the audio cable connections look like (because the ad deceptively photoshopped them out of the picture.)
    The Express's low power analog output, plus optical, not to mention an Ethernet port, router, bridge, a/b/g/n wireless access point and USB printer port in such a tiny package with a self-contained power supply is a such a generalist's piece of connectivity I can't imagine asking for anything more.
    It is a pretty impressive package. But, I'm still asking for GigE in the next rev.

  • Since the ios7 update has anyone lost ability to charge phone with external battery back! And is there going to be an update to correct this?

    Since the ios7 update has anyone lost ability to charge phone with external battery back! And is there going to be an update to correct this?

    Modular747 is a troll with very little real knowledge of the iPhone charging systems (as evidenced by his uninformed comments in other threads).
    It could very well be iOS 7 refusing to charge from "non-authorized" accessories. We have done A/B tests with the same accessory (in this case cables) with iOS6 and iOS7 and have seen the cable work with iOS6, then not work (i.e. not charge) with iOS 7. Same device, same cable. Only change was the OS.
    Keep the pressure on Apple, folks. It is not OK to make working accessories unusable with a software update.

  • Has anyone tried drawing on the iPad with a stylus?

    I have tried the Jukestyle iPad stylus to draw signatures on the iPad. Has anyone else tried an iPad stylus to use for signatures on documents and contracts? Which ones do you prefer?

    OK I do not have a Lexus, but I have a 2004 Prius with Nav and Bluetooth and as I understand it the Bluetooth is the same. It took me like 45 seconds to do it. I did not touch a manual. Go to the phone and then the set up. In my car it gives you the default password. Go to the settings-> Network -> Bluetooth on the iPhone type in the password and you are in. Uploading you phone book is another issue but can be done from you Mac or PC with Bluetooth or with a older Bluetooth phone.

Maybe you are looking for

  • Problem with "stretching" when using report generation vi's to print fron panel.

    I am using LabVIEW 6.0.1 and when I use the "Append Front Panel Image to Report" vi to print my fron panel, the result is an elongated (stretched)version of my front panel that runs off the page and doesn't show some of the content. Does anyone know

  • How to fetch Billing Document Number

    Hi All, i have Sold to party (kunnr), from this i need to find Billing document number and the corresponding Ship to party. i have used       SELECT vbeln FROM vbpa INTO TABLE gt_vbeln                               WHERE PARVW = 'WE' AND             

  • Print front to back

    I have a HP officejet Pro and need to print front to back and cannot unless I print in the booklet form

  • Static methods in interface (Yes, once again!)

    I know there has been many questions about why static methods in interfaces are not allowed. I know it is forbidden by the JLS. But does anyone know the exact reason for this? Is it just a design issue or are there technical difficulties with allowin

  • Crystal report- Connect from SAP gateway to RFC server failed

    Hi All, I am trying to connect to a SAP R3 system from crystal reports but it gives me below error. Please note : Transports have been imported and also the roles CRYSTAL_ENTITLEMENT and CRYSTAL_DESIGNER. My user is a member of these roles which were